Empiece

Patrones de gráficos

Gold 15m: Trend + S/R + Liquidity Sweep (RR 1:2)This strategy is designed for short-term trading on XAUUSD (Gold) using the 15-minute timeframe. It combines trend direction, support/resistance pivots, liquidity sweep detection, and momentum confirmation to identify high-probability reversal setups in line with the dominant market trend. ⚙️ Core Logic: Trend Filter (EMA 200): The strategy only takes long positions when price is above the 200 EMA and short positions when price is below it. Support/Resistance via Pivots: Dynamic swing highs and lows are identified using pivot points. These act as local supply and demand levels where liquidity is likely to accumulate. Liquidity Sweep Detection: A bullish liquidity sweep occurs when price briefly breaks below the last pivot low (grabbing liquidity) and then closes back above it. A bearish sweep occurs when price breaks above the last pivot high and then closes back below. Momentum & Candle Strength: The strategy filters signals based on candle range and body size to ensure entries occur during strong price reactions, not weak retracements. Risk Management (1:2 RR): Stop-loss is placed slightly beyond the last pivot level using ATR-based buffers, and take-profit is set at 2× the risk distance, maintaining a reward-to-risk ratio of 1:2. 💼 Trade Logic Summary: Long Entry: After a bullish liquidity sweep & reclaim, momentum confirmation, and trend alignment (above EMA 200). Short Entry: After a bearish sweep & reclaim, momentum confirmation, and trend alignment (below EMA 200). Exit: Automated via ATR-based Stop Loss and Take Profit targets. 📊 Customization Options: Adjustable EMA length, pivot settings, ATR multipliers, and RR ratio. Option to enable/disable trend filter. Toggle display of S/R zones on chart. 🧠 Best Use: Works best during London and New York sessions when Gold shows strong momentum. Can be adapted for forex pairs and indices by tuning ATR and pivot parameters.
Estrategia Pine Script®
por phanongkumsen
Ichimoku + Multi-Trend DashboardIchimoku + Multi-Trend Dashboard A professional multi-indicator trend analyzer that fuses Ichimoku Cloud with volume, momentum, and price-based confirmations — all visualized in a dynamic dashboard. 🔍 Overview The OSPL Ichimoku + Multi-Trend Dashboard is a comprehensive market-structure and momentum visualization tool built for serious traders who value clarity, precision, and confirmation. It combines the powerful Ichimoku Cloud system with VWMA, SuperTrend, RSI, and VWAP to provide a 360-degree view of market direction, trend strength, and trade zones. This indicator allows traders to instantly read multi-indicator alignment through a color-coded dashboard, helping filter out noise and improve timing for entries and exits. ⚙️ Core Features 🟢 1. Ichimoku Cloud Framework Displays all major Ichimoku elements: Tenkan-Sen, Kijun-Sen, Senkou Span A & B (Kumo Cloud). Detects Bullish and Bearish Tenkan-Kijun Crossovers. Identifies Cloud Trend Bias (price above, below, or inside the Kumo). Marks Buy / Sell / Wait Zones automatically based on price structure and line alignment. ⚡ 2. Multi-Indicator Confirmation Layer Enhance trend validation using: VWMA (Volume-Weighted Moving Average): Measures volume-driven price trend. SuperTrend: Uses ATR to confirm trend direction and detect reversals. RSI (Relative Strength Index): Gauges market momentum — above 50 indicates bullish bias, below 50 bearish. VWAP (Volume-Weighted Average Price): Tracks institutional and fair value price zones. Each of these indicators contributes to a synchronized dashboard view that instantly reveals market bias. 📊 3. Interactive Dashboard Display Clean, modern bottom-right table summarizing indicator values and their current trend status. Color-coded trend map: 🟢 Green = Bullish 🔴 Red = Bearish 🟡 Yellow = Neutral / Wait Quick visual reference — ideal for active traders who rely on multiple confirmations before taking trades. 🌥 4. Kumo Visualization Smoothly shaded Ichimoku Cloud fill highlights dominant market phase (bullish or bearish). Dynamic transition coloring enhances visibility of potential breakouts or reversals. 🎯 How to Use Use the dashboard as a trend alignment and confirmation tool: Bullish Confluence Example: Price above Kumo Cloud Tenkan-Sen > Kijun-Sen RSI > 50 SuperTrend below price VWMA and VWAP trending upward Bearish Confluence Example: Price below Kumo Cloud Tenkan-Sen < Kijun-Sen RSI < 50 SuperTrend above price VWMA and VWAP trending downward When most indicators align in the same direction, the system provides high-probability trade zones. It can be used across all timeframes, from intraday scalping to multi-day swing trading. 🧩 Why Use This Indicator ✅ Filters false signals by combining multiple trend tools. ✅ Eliminates the need to switch between multiple indicators. ✅ Offers an at-a-glance visual assessment of overall market bias. ✅ Adaptable to any asset: stocks, indices, forex, commodities, or crypto. ✅ Ideal for traders using trend-following, momentum, or confirmation-based strategies. 🧠 Professional Tips Combine the dashboard signals with price action and volume breakouts for enhanced accuracy. Use higher timeframe Ichimoku structure as a directional filter (e.g., check the 1-hour trend while trading on 15-minute). Apply ATR-based stop loss and multi-timeframe confluence to further strengthen entries. Works exceptionally well with Heikin Ashi candles for smoother visual trends. 💡 Suggested Use Cases Intraday & Swing Trading Trend Continuation & Reversal Identification Multi-Indicator Confirmation System Dashboard-Style Strategy Testing and Backtesting ⚠️ Disclaimer This indicator is designed for educational and analytical purposes only. It is not financial advice and does not guarantee profitability. Always perform independent analysis and apply prudent risk management before executing trades.
Indicador Pine Script®
por RANAPRATAP24
Serenity Model VIPI — by yuu_iuHere’s a concise, practical English guide for Serenity Model VIPI (Author: yuu_iu). It covers what it is, how to set it up for daily trading, how to tune it, and how we guarantee non-repainting. Serenity Model VIPI — User Guide (Daily Close, Non‑Repainting) Credits - Author: yuu_iu - Producer: yuu_iu - Platform: TradingView (Pine Script v5) 1) What it is Serenity Model VIPI is a multi‑module, context‑aware trading model that fuses signals from: - Entry modules: VCP, Flow, Momentum, Mean Reversion, Breakout - Exit/risk modules: Contrarian, Breakout Sell, Volume Delta Sell, Peak Detector, Overbought Exit, Profit‑Take - Context/memory: Learns per Ticker/Sector/Market Regime and adjusts weights/aggression - Learning engine: Runs short “fake trades” to learn safely before scaling real trades It produces a weighted, context‑adjusted score and a final decision: BUY, SELL, TAKE_PROFIT, or WAIT. 2) How it works (high level) - Each module computes a score per bar. - A fusion layer combines module scores using accuracy and base weights, then adjusts by: - Market regime (Bull/Bear/Sideways) and optional higher‑timeframe (HTF) bias - Risk control neuron - Context memory (ticker/sector/regime) - Optional LLM mode can override marginal cases if context supports it. - Final decision is taken at bar close only (no intrabar repaint). 3) Non‑repainting guarantee (Daily) - Close‑only execution: All key actions use barstate.isconfirmed, so signals/entries/exits only finalize after the daily candle closes. - No lookahead on HTF data: request.security() reads prior‑bar values (series ) for HTF close/EMA/RSI. - Alerts at bar close: Alerts are fired once per bar close to prevent mid‑bar changes. What this means: Once the daily bar closes, the decision and alert won’t be repainted. 4) Setup (TradingView) - Paste the Pine v5 code into Pine Editor, click Add to chart. - Timeframe: 1D (Daily). - Optional: enable a date window for training/backtest - Enable Custom Date Filter: ON - Set Start Date / End Date - Create alert (non‑repainting) - Condition: AI TRADE Signal - Options: Once Per Bar Close - Webhook (optional): Paste your URL into “System Webhook URL (for AI events)” - Watch the UI - On‑chart markers: AI BUY / AI SELL / AI TAKE PROFIT - Right‑side table: Trades, Win Rate, Avg Profit, module accuracies, memory source, HTF trend, etc. - “AI Thoughts” label: brief reasoning and debug lines. 5) Daily trading workflow - The model evaluates at daily close and may: - Enter long (BUY) when buy votes + total score exceed thresholds, after context/risk checks - Exit via trailing stop, hard stop, TAKE_PROFIT, or SELL decision - Learning mode: - Triggers short “fake trades” every N bars (default 3) and measures outcome after 5 bars - Improves module accuracies and adjusts aggression once stable (min fake win% threshold) - Memory application: - When you change tickers, the model tries to apply Ticker or Sector memory for the current market regime to pre‑bias module weights/aggression. 6) Tuning (what to adjust and why) Core controls - Base Aggression Level (default 1.0): Higher = more trades and stronger decisions; start conservative on Daily (1.0–1.2). - Learning Speed Multiplier (default 3): Faster adaptation after fake/real trades; too high can overreact. - Min Fake Win Rate to Exit Learning (%) (default 10–20%): Raises the bar before trusting more real trades. - Fake Trade Every N Bars (default 3): Frequency of learning attempts. - Learning Threshold Win Rate (default 0.4): Governs when the learner should keep learning. - Hard Stop Loss (%) (default 5–8%): Global emergency stop. Multi‑Timeframe (MTF) - Enable Multi‑Timeframe Confirmation: ON (recommended for Daily) - HTF Trend Source: HOSE:VNINDEX for VN equities (or CURRENT_SYMBOL if you prefer) - HTF Timeframe: D or 240 (for a strong bias) - MTF Weight Adjustment: 0.2–0.4 (0.3 default is balanced) Module toggles and base weights - In strong uptrends: increase VCP, Momentum, Breakout (0.2–0.3 typical) - In sideways low‑vol regimes: raise MeanRev (0.2–0.3) - For exits/defense: Contrarian, Peak, Overbought Exit, Profit‑Take (0.1–0.2 each) - Keep Flow on as a volume‑quality filter (≈0.2) Memory and control - Enable Shared Memory Across Tickers: ON to share learning - Enable Sector‑Based Knowledge Transfer: ON to inherit sector tendencies - Manual Reset Learning: Use sparingly to reset module accuracies if regime changes drastically Risk management - Hard Stop Loss (%): 5–8% typical on Daily - Trailing Stop: ATR‑ and volatility‑adaptive; tightens faster in Bear/High‑Vol regimes - Max hold bars: Shorter in Bear or Sideways High‑Vol to cut risk Alerts and webhook - Use AI TRADE Signal with Once Per Bar Close - Webhook payload is JSON, including event type, symbol, time, win rates, equity, aggression, etc. 7) Recommended Daily preset (VN equities) - MTF: Enable, Source: HOSE:VNINDEX, TF: D, Weight Adj: 0.3 - Aggression: 1.1 - Learning Speed: 3 - Min Fake Win Rate to Exit Learning: 15% - Hard SL: 6% - Base Weights: - VCP 0.25, Momentum 0.25, Breakout 0.15, Flow 0.20 - MeanRev 0.20 (raise in sideways) - Contrarian/Peak/Overbought/Profit‑Take: 0.10–0.20 - Leave other defaults as is, then fine‑tune by symbol/sector. 8) Reading the UI - Table highlights: Real Trades, Win Rate, Avg Profit, Fake Actions/Win%, VCP Acc, Aggression, Equity, Score, Status (LEARNING/TRADING/REFLECTION), Last Real, Consec Loss, Best/Worst Trade, Pattern Score, Memory Source, Current Sector, AI Health, HTF Trend, Scheduler, Memory Loaded, Fake Active. - Shapes: AI BUY (below bar), AI SELL/TAKE PROFIT (above bar) - “AI Thoughts”: module contributions, context notes, debug lines 9) Troubleshooting - No trades? - Ensure timeframe is 1D and the date filter covers the chart range - Check Scheduler Cooldown (3 bars default) and that barstate.isconfirmed (only at close) - If MTF is ON and HTF is bearish, buy bias is reduced; relax MTF Weight Adjustment or module weights - Too many/too few trades? - Lower/raise Base Aggression Level - Adjust base weights on key modules (raise entry modules to be more active; raise exit/defense modules to be more selective) - Learning doesn’t end? - Increase Min Fake Win Rate to Exit Learning only after it’s consistently stable; otherwise lower it or reduce Fake Trade Every N Bars 10) Important notes - The strategy is non‑repainting at bar close by design (confirmed bars + HTF series + close‑only alerts). - Backtest fills may differ from live fills due to slippage and broker rules; this is normal for all TradingView strategies. - Always validate settings across multiple symbols and regimes before going live. If you want, I can bundle this guide into a README section in your Pine code and add a small on‑chart signature (Author/Producer: yuu_iu) in the top‑right corner.
Estrategia Pine Script®
por Thach999
1
EMA 20/50/100/200 Multi-Layer Trend Panel 📘 EMA 20/50/100/200 Multi-Layer Trend Panel A clean and advanced trend structure analyzer designed to help traders monitor short-, medium-, and long-term market momentum simultaneously. This indicator combines four key EMAs — 20, 50, 100, and 200 — with visual clouds, dynamic color coding, crossover labels, and a powerful real-time summary panel. 🔍 How It Works Each EMA line changes color depending on its slope direction → Green tone = uptrend, Red tone = downtrend. Detects and labels important crossovers automatically: 20/50 GC → Short-term bullish shift (Golden Cross). 50/200 GC → Long-term strong bullish breakout. DC labels indicate Death Cross or bearish reversals. Cloud zones between EMAs visualize the interaction between short- and long-term trends. A compact top-right panel displays each EMA’s current value, slope direction, and overall trend alignment status (BULL / BEAR / MIXED). ⚙️ Advantages ✅ Tracks trend structure on multiple layers (short → medium → long). ✅ Highlights momentum shifts using dynamic EMA slope coloring. ✅ Provides early visual warnings of trend reversals (GC/DC). ✅ Clean, minimal panel offers an instant multi-EMA overview. ✅ Compatible with multi-timeframe (MTF) analysis — view higher-TF EMAs within lower charts. ✅ Optional bar and background coloring makes trend zones easy to interpret. 💡 Pro Tips On higher timeframes (1D / 4H), the 50/200 cross defines the macro market direction. On lower timeframes (5m – 15m), the 20/50 cross helps refine entry timing. When the panel shows → Aligned BULL (20>50>100>200) → Strong trending condition. → Mixed → Ranging or transition phase. Combine with volume or RSI for confluence in entry/exit decisions. 🧭 Purpose This indicator aims to simplify complex market structure into an elegant, color-coded system — allowing traders to stay aligned with the dominant trend while spotting early reversals across multiple time horizons. 🧩 Ideal For Swing & position traders confirming long-term bias. Intraday traders aligning entries with higher-TF EMAs. Strategy developers seeking multi-EMA trend filters. Anyone who wants a clean, informative, and unobtrusive visual trend dashboard. ⚠️ Notes The script supports optional MTF (multi-timeframe) mode — use carefully, as MTF data may repaint during incomplete bars. No trading system is perfect; always combine with your personal strategy and proper risk management.
Indicador Pine Script®
por balinalarla_yuzen_hamsi
OG Trend MasterOG Trend Master Smart trend-tracking indicator designed to identify opportunities using Supertrend + EMA confirmation logic. It automatically adapts to market volatility and structure: ✅ Supertrend core to detect directional bias ⚡ Dual EMA cross for confirmation and precision 🎯 Visual arrows + diamonds for instant clarity on entries 🔔 Real-time alerts for both LONG and SHORT confirmations Built for traders who value simplicity, accuracy, and flow. From scalpers to swing traders OG Trend Master delivers smooth trend identification across all timeframes.
Indicador Pine Script®
por iamtradingdon
1
AshokTrendThe AshokTrend indicator uses a combination of trendline logic and pivot high/low detection to signal possible BUY and SELL trades based on price action and structural breakouts. ### Buy/Sell Signal Logic - **Buy Trade Signal**: It identifies local pivot lows using a lookback period, then checks multiple conditions comparing current and previous pivot values to validate a breakout. If conditions are met, triangle-up shapes are plotted below bars to indicate a possible long trade, and trendlines are drawn connecting pivots for visual confirmation. - **Sell Trade Signal**: It locates pivot highs, applies similar multi-point checks, and confirms breakdowns in structure. Upon a valid signal, triangle-down shapes are plotted above bars to indicate a possible short trade, with corresponding trendlines marking pivot connections. ### Structural Confirmation - Both buy and sell signals require the breakout/breakdown to be visually confirmed via the movement and steepness (slope) of custom lines that represent price momentum between pivots. Lines are updated or deleted if price fails the required strength, ensuring signals are filtered for validity. ### Alert and Analysis Details - **Alerts**: Plotted shapes (triangle up for buy, triangle down for sell) can be used for automated alerts, integrating with platform alert conditions for strategy automation. - **Analysis**: The indicator incorporates logic for cleaning up invalid signals and pruning trendlines when a reversal is detected, increasing reliability of entries and exits for both buy and sell trades. ### Key Settings for Customization - Lookback period, padding, and color settings allow the user to tune signal frequency and visual appearance according to specific trading needs. ### Summary Table | Signal Type | Visual Mark | Pivot Reference | Trendline Confirmation | Filtering Logic | |----------------------|--------------|-----------------|-----------------------|-------------------------------| | BUY | Triangle Up | Pivot Low | Slope & multi-point | Valid breakout only | | SELL | Triangle Down| Pivot High | Slope & multi-point | Valid breakdown only | This approach ensures that only structurally strong breakout-based trades are considered, pruning false signals in real-time for improved consistency in automated or manual trade analysis Follow me for more updates... Disclaimer - This post is created for only Learning Purpose. Every Charts, Trade Ideas, Buy & Sell Levels and Updates are Provided  For Learning Purpose Only . We Do Not Provide Any Buy And Sell Signals Tips.  We are Not SEBI Registered .Do Always Calculate Your risk Before Taking the Trade And consult your Financial Advisor Before taking any Trade. Thank You
Indicador Pine Script®
por ashok137a
MACD HTF Hardcoded (A/B Presets) + Regimes [CHE] MACD HTF Hardcoded (A/B Presets) + Regimes — Higher-timeframe MACD emulation with acceptance-based regime filter and on-chart diagnostics Summary This indicator emulates a higher-timeframe MACD directly on the current chart using two hardcoded preset families and a time-bucket mapping, avoiding cross-timeframe requests. It classifies four MACD regimes and applies an acceptance filter that requires several consecutive bars before a state is considered valid. A small dead-band around zero reduces noise near the axis. An on-chart table reports the active preset, the inferred time bucket, the resolved lengths, and the current regime. Pine version: v6 Overlay: false Primary outputs: MACD line, Signal line, Histogram columns, zero line, regime-change alert, info table Motivation: Why this design? Cross-timeframe indicators often rely on external timeframe requests, which can introduce repaint paths and added latency. This design provides a deterministic alternative: it maps the current chart’s timeframe to coarse higher-timeframe buckets and uses fixed EMA lengths that approximate those views. The dead-band suppresses flip-flops around zero, and the acceptance counter reduces whipsaw by requiring sustained agreement across bars before acknowledging a regime. What’s different vs. standard approaches? Baseline: Classical MACD with user-selected lengths on the same timeframe, or higher-timeframe MACD via cross-timeframe requests. Architecture differences: Hardcoded A and B length families with a bucket map derived from the chart timeframe. No `request.security`; all calculations occur on the current series. Regime classification from MACD and Histogram sign, gated by an acceptance count and a small zero dead-band. Diagnostics table for transparency. Practical effect: The MACD behaves like a slower, higher-timeframe variant without external requests. Regimes switch less often due to the dead-band and acceptance logic, which can improve stability in choppy sessions. How it works (technical) The script derives a coarse bucket from the chart timeframe using `timeframe.in_seconds` and maps it to preset-specific EMA lengths. EMAs of the source build MACD and Signal; their difference is the Histogram. Signs of MACD and Histogram define four regimes: strong bull, weak bull, strong bear, and weak bear. A small, user-defined band around zero treats values near the axis as neutral. An acceptance counter checks whether the same regime persisted for a given number of consecutive bars before it is emitted as the filtered regime. A single alert condition fires when the filtered regime changes. The histogram columns change shade based on position relative to zero and whether they are rising or falling. A persistent table object shows preset, bucket tag, resolved lengths, and the filtered regime. No cross-timeframe requests are used, so repaint risk is limited to normal live-bar movement; values stabilize on close. Parameter Guide Source — Input series for MACD — Default: Close — Using a smoother source increases stability but adds lag. Preset — A or B length family — Default: “3,10,16” — Switch to “12,26,9” for the classic family mapped to buckets. Table Position — Anchor for the info table — Default: Top right — Choose a corner that avoids covering price action. Table Size — Table text size — Default: Normal — Use small on dense charts, large for presentations. Dark Mode — Table theme — Default: Enabled — Match your chart background for readability. Show Table — Toggle diagnostics table — Default: Enabled — Disable for a cleaner pane. Zero dead-band (epsilon) — Noise gate around zero — Default: Zero — Increase slightly when you see frequent flips near zero. Acceptance bars (n) — Bars required to confirm a regime — Default: Three — Raise to reduce whipsaw; lower to react faster. Reading & Interpretation Histogram columns: Above zero indicates bullish pressure; below zero indicates bearish pressure. Darker shade implies the histogram increased compared with the prior bar; lighter shade implies it decreased. MACD vs. Signal lines: The spread corresponds to histogram height. Regimes: Strong bull: MACD above zero and Histogram above zero. Weak bull: MACD above zero and Histogram below zero. Strong bear: MACD below zero and Histogram below zero. Weak bear: MACD below zero and Histogram above zero. Table: Inspect active preset, bucket tag, resolved lengths, and the filtered regime number with its description. Practical Workflows & Combinations Trend following: Use strong bull to favor long exposure and strong bear to favor short exposure. Use weak states as pullback or transition context. Combine with structure tools such as swing highs and lows or a baseline moving average for confirmation. Exits and risk: In strong trends, consider exiting partial size on a regime downgrade to a weak state. In choppy sessions, increase the acceptance bars to reduce churn. Multi-asset / Multi-timeframe: Works on time-based charts across liquid futures, indices, currencies, and large-cap equities. Bucket mapping helps retain a consistent feel when moving from lower to higher timeframes. Behavior, Constraints & Performance Repaint/confirmation: No cross-timeframe requests; values can evolve intrabar and settle on close. Alerts follow your TradingView alert timing settings. Resources: `max_bars_back` is set to five thousand. Very large resolved lengths require sufficient history to seed EMAs; expect a warm-up period on first load or after switching symbols. Known limits: Dead-band and acceptance can delay recognition at sharp turns. Extremely thin markets or large gaps may still cause brief regime reversals. Sensible Defaults & Quick Tuning Start with preset “3,10,16”, dead-band near zero, and acceptance of three bars. Too many flips near zero: increase the dead-band slightly or raise the acceptance bars. Too sluggish in clean trends: reduce the acceptance bars by one. Too sensitive on fast lower timeframes: switch to the “12,26,9” preset family or raise the acceptance bars. Want less clutter: hide the table and keep the alert. What this indicator is—and isn’t This is a visualization and regime layer for MACD using higher-timeframe emulation and stability gates. It is not a complete trading system and does not generate position sizing or risk management. Use it with market structure, execution rules, and protective stops. Disclaimer The content provided, including all code and materials, is strictly for educational and informational purposes only. It is not intended as, and should not be interpreted as, financial advice, a recommendation to buy or sell any financial instrument, or an offer of any financial product or service. All strategies, tools, and examples discussed are provided for illustrative purposes to demonstrate coding techniques and the functionality of Pine Script within a trading context. Any results from strategies or tools provided are hypothetical, and past performance is not indicative of future results. Trading and investing involve high risk, including the potential loss of principal, and may not be suitable for all individuals. Before making any trading decisions, please consult with a qualified financial professional to understand the risks involved. By using this script, you acknowledge and agree that any trading decisions are made solely at your discretion and risk. Do not use this indicator on Heikin-Ashi, Renko, Kagi, Point-and-Figure, or Range charts, as these chart types can produce unrealistic results for signal markers and alerts. Best regards and happy trading Chervolino
Indicador Pine Script®
por chervolino
8x Heikin Ashi Streak (1m) by Bitcoin Benito🧭 Indicator Description: “8x Heikin Ashi Streak (1m) by Bitcoin Benito” **Purpose:** The *8x Heikin Ashi Streak* indicator helps traders quickly identify strong short-term momentum on the **1-minute timeframe**. It automatically tracks Heikin Ashi candles and alerts you whenever **8 consecutive bullish or bearish candles** appear — a visual cue that a strong intraday trend or exhaustion point might be forming. --- 🔍 **How It Works** * The indicator continuously counts Heikin Ashi candles in real-time. * When it detects **8 bullish (green)** or **8 bearish (red)** candles in a row: * A green ▲ marker appears **below** the 8th candle for bullish streaks. * A red ▼ marker appears **above** the 8th candle for bearish streaks. * You can set alerts to automatically notify you when these streaks occur. This makes it ideal for **momentum traders**, **scalpers**, and **trend-reversal spotters** who want to: * Catch strong intraday moves early. * Identify potential overextension zones before pullbacks. * Automate alert signals for short-term trading setups. IMPORTANT: Only trade when most of the 8 candles are below/above the EMA 8 Line respectively. Add an EMA 8 indicator to see if this is the case --- ⚙️ **How to Use** 1. **Apply to a 1-minute chart** (this script is optimized for 1m timeframes). 2. When the indicator plots a green or red triangle: * **Green triangle (8 bullish candles):** Trend momentum is strong upward. * **Red triangle (8 bearish candles):** Downward momentum is dominant. 3. Optionally, combine with volume or EMA filters to confirm breakouts or exhaustion. --- 🔔 **Setting Up Alerts** * Click the **Alert (🔔)** icon on TradingView. * Under *Condition*, select: * “8x Heikin Ashi Streak (1m)” → “8 Bullish Heikin Ashi (1m)” * OR “8x Heikin Ashi Streak (1m)” → “8 Bearish Heikin Ashi (1m)” * Choose **Once per bar close** to trigger the alert when the 8th candle completes. * Add your custom message, e.g. > “🚀 8 bullish Heikin Ashi candles in a row on 1-minute chart!” > “🔻 8 bearish Heikin Ashi candles in a row on 1-minute chart!” --- 📊 **Best Practices** * Works best on **liquid assets** (major forex pairs, indices, BTC/USD, etc.). * Pair with **RSI**, **EMA**, or **Volume** indicators for stronger confirmation. * Not a standalone buy/sell signal — treat it as a **momentum or exhaustion alert**. * Can be adapted to other timeframes by changing chart resolution. --- ⚠️ **Disclaimer** This indicator is for **educational and analytical purposes only**. Trading carries risk — always test on demo accounts and use proper risk management. No indicator guarantees profit; this is a tool for insight and timing, not financial advice.
Indicador Pine Script®
por rememberit1
Smart Money Concepts ProSmart Money Concepts Pro A professional-grade framework for visualizing institutional price behavior through key Smart Money Concepts. It automatically maps structure shifts, imbalances, and liquidity events so traders can study how price develops around supply and demand. Core Components Market Structure (BOS / CHoCH) — Detects continuation and reversal breaks using pivot-based logic with a close-beyond threshold and configurable cooldown. Order Blocks — Highlights institutional footprints validated by volume and distance filters; zones extend until mitigation. Fair Value Gaps — Marks three-bar inefficiencies that meet a minimum gap size and optionally auto-remove once filled by a user-defined percentage. Liquidity Sweeps — Identifies stop-hunt wicks exceeding a configurable extension beyond recent highs or lows. Premium / Discount Zones — Defines equilibrium and price positioning within recent swing ranges. Confluence Entries (optional) — Generates neutral BUY / SELL markers only when structure, zone, and directional context align. Dashboard — Summarizes current structure bias, recent events, zone counts, and directional alignment in real time. Why it’s distinct All detections are governed by explicit thresholds—volume multipliers, minimum distances, and fill-percent logic—so each signal results from quantifiable structure rather than heuristic pattern matching. Automatic cleanup ensures charts remain clear as zones are mitigated or gaps filled. Best use Applicable across Forex, indices, crypto, and equities. Designed for study on 15 m – 1 D timeframes. For optimal alignment, pin plots to the Right Scale after adding the script. Access This indicator is public invite-only. Click Request Access on this page to apply. Access requests are manually reviewed. Disclaimer: This script is provided for educational and analytical purposes only. It does not constitute financial or investment advice.
Indicador Pine Script®
por FluxQuant
MARKET SCANNER Core Components: 1. Market Structure & Pivot Points Multi-timeframe Pivots: Daily, Weekly, Monthly pivot points Central Pivot Range (CPR): For all timeframes N-Day High/Low Tracking: Dynamic support/resistance based on recent price action 2. Volume Analysis Institutional Volume Metrics: Buy/Sell pressure, Net flow, Volume Power Cumulative Delta: Tracks order flow imbalance Volume Profile: Right-side profile with POC (Point of Control) and Value Area Volume Strikes: Identifies significant volume absorption/breakout levels 3. Price Action & Patterns Fibonacci-based Candlestick Recognition: Green/Red candles with specific Fibonacci conditions Support/Resistance Zones: Dynamic boxes based on Fibonacci retracements Breakout Detection: Tracks breakouts above N-day high/low with retracement levels 4. Moving Averages & VWAP VWAP with multiple moving averages (20, 50, 250 periods) MVWAP Sign Detection: Tracks flips in VWAP momentum 5. Market Sentiment Analysis Composite Sentiment Score: Combines RSI, MACD, Stochastic, Moving Averages, ADX Confidence Scoring: Measures signal reliability Conflict Detection: Identifies when volume and price signals disagree 6. Advanced Features Dynamic Gap Calculations: Measures distance to support/resistance zones Swing Analysis: Identifies swing highs/lows with gap measurements Volume-Price Confirmation: Validates moves with volume Professional Tables: Multiple tables displaying pivot levels, differences, sentiment, and volume metrics Key Trading Concepts Implemented: Institutional Order Flow: Tracks smart money activity Volume-Weighted Price Levels: Identifies significant price zones Multi-timeframe Analysis: Correlates daily, weekly, monthly levels Fibonacci Retracement Strategies: For entries and exits Market Microstructure: Through volume profile and delta analysis Visual Outputs: Dynamic support/resistance boxes Volume profile histogram Multiple information tables Real-time sentiment scoring Retracement lines and zones This is essentially a professional-grade trading suite that combines price action, volume analysis, market structure, and sentiment into one comprehensive tool suitable for both discretionary and systematic trading approaches.
Indicador Pine Script®
por Sudip09m
ORBSMMAATRVOLREENTRY2Contracts📈 Opening Range Fibonacci Breakout (TradingView Strategy) Overview: The Opening Range Fibonacci Breakout strategy is designed to capture high-probability intraday moves by combining the power of the 15-minute opening range, trend confirmation via SMMA, and volume-based momentum filtering. At the start of each trading session, the script automatically plots the Opening Range Box based on the first 15 minutes of price action — highlighting key intraday support and resistance levels. How It Works: Opening Range Setup The first 15 minutes of the session define the range high and low. A visual box marks this zone on the chart for easy reference. Signal Generation A Smoothed Moving Average (SMMA) with a user-defined period determines overall trend bias. Candle volume is analyzed to confirm momentum strength. Long Signal: Price breaks above the opening range high, SMMA trending up, and volume supports the move. Short Signal: Price breaks below the opening range low, SMMA trending down, and volume supports the move. Take Profit & Targets Fibonacci extension levels are automatically plotted from the opening range. These dynamic levels serve as structured Take Profit (TP) zones for partial or full exits. Features: ✅ 15-Minute Opening Range Box ✅ Adjustable SMMA period ✅ Volume-based confirmation filter ✅ Automatic Fibonacci profit targets ✅ Visual Long/Short alerts & signals Ideal For: Scalpers and intraday traders who rely on early-session momentum, breakout confirmation, and precision exit targets. Backtested for MNQ/NQ futures trading
Estrategia Pine Script®
por wavyyy_z
1
Ripster Clouds (EMA + MTF)v6🧠 Purpose This indicator combines Ripster EMA Clouds and Multi-Timeframe (MTF) EMA Clouds into one script. It allows you to visualize short vs long exponential (or simple) moving averages as colored “clouds” to identify trend direction and momentum — across both your current timeframe and a higher timeframe (e.g., daily). ⚙️ Main Features 1. EMA Clouds (Local Timeframe) Up to 5 separate EMA/SMA cloud sets (8/9, 5/12, 34/50, 72/89, 180/200 by default). Each can be individually enabled/disabled in the settings. MA type toggle → Choose between EMA and SMA. Optional line display toggle for showing the short and long MA lines. Color-coded trend clouds: Greenish tones = bullish (short > long) Reddish tones = bearish (short < long) Configurable leading offset and global offset for alignment. 2. MTF Clouds (Higher Timeframe) Two sets of higher timeframe EMA clouds (default: 50/55 and 20/21). Uses request.security() to pull EMA data from a selected higher timeframe (default = Daily). Optional line visibility toggle (Display Lines). Blue and teal semi-transparent fills to distinguish from local clouds. Each MTF cloud can be toggled independently. 3. Unified Controls Master toggles: ✅ Show EMA Clouds ✅ Show MTF Clouds Transparent cloud fills with dynamically changing colors based on EMA crossovers and slope. No local-scope plot() or fill() calls — fully compliant with Pine v6 rules. 🎨 Color Logic Each EMA cloud uses a unique color pair (5 total). Cloud color changes dynamically based on whether the short EMA is above or below the long EMA. Line color changes with slope: Olive = EMA rising Maroon = EMA falling 📊 Technical Structure Written in Pine Script v6. All plot() and fill() calls are at global scope to prevent compilation errors. Uses helper functions only for math/color logic. Performance-optimized for TradingView’s rendering limits. 🧩 Quick Setup in TradingView Paste the script into the Pine Editor. Add to chart. In settings: Toggle on/off any EMA or MTF clouds. Adjust timeframe (Resolution), line visibility, or offsets. Choose EMA or SMA as the base calculation. ✅ Result You now have one unified, customizable Ripster EMA + MTF Cloud indicator, stable in Pine v6, with complete flexibility to toggle, style, and analyze multiple timeframe trends on a single chart.
Indicador Pine Script®
por chandrashekar_thippani