Empiece

Indicadores y estrategias

Iron Condor Pro v6 – Full EngineIronCondor Engine v6.6 is a multi-mode options strategy tool for planning and managing iron condors, straddles, strangles, and butterflies. It supports both setup planning and live trade tracking with modeled delta, risk-based strike selection, IV rank estimation, and visual breach alerts. Use Setup Mode to preview strike structures based on IV proxy, ATR, delta targeting, and risk tier (High/Mid/Low/Delta). Use Live Mode to track real trades, enter strike/premium data, and monitor live P&L, delta drift, and range status. This script does not connect to live option chains. Volatility and delta are modeled using price history. All strikes and premiums must be confirmed using your broker before placing trades. Best used with strong support/resistance levels and high IV rank (30%+). For educational purposes only. Workflow Guide Use this flow whether you're setting up on Sunday night or any day before placing a trade. Step 0: Pre-Script Preparation Before using the script: Identify major support and resistance zones on your chart. Define the expected range or consolidation area. Use this context to help evaluate strike placement 1. Setup Phase (Pre-Trade Planning) Step 1 – Load the Script Add: IronCondor Engine v6.6 – Full Risk/Decay Edition to your chart Step 2 – Set Mode = Setup This enables planning mode, where the engine calculates strike combinations based on: Your selected risk profile (High, Mid, Low, or Delta) Historical volatility (20-day log return) ATR (Average True Range) Target short delta (adjustable) Step 3 – Review Setup Table Enable Show Setup Table to view calculated strikes and width by risk tier. Adjust any of the following as needed: Target Short Delta Strike Interval ($) Width multipliers (High/Mid/Low) Risk tier under Auto-Feed Choice Step 4 – Evaluate the Setup Is the net credit at least 1.5–2.0x your max risk? Are the short strikes clearly outside support/resistance zones? Are the short deltas between 0.15 and 0.30? Is the range wide enough to handle normal price movement? Step 5 – Prep for Execution Enable Auto-Feed Setup → Live to carry Setup strikes into Live mode Or disable it if you prefer to manually enter strikes later 2. Trade Execution (Live Tracking Mode) Step 1 – Place the Trade with Your Broker Use your brokerage (TOS, Tasty, IBKR, etc.) to place the iron condor or other structure Step 2 – Set Mode = Live In Live mode: If Auto-Feed is ON, the Setup strikes auto-populate If Auto-Feed is OFF, manually enter: Short and long strikes (Call and Put) Premiums collected/paid per leg Total net credit (Entry Credit) Optional: Input current mid prices for each leg in the "Live Chain" section to track live mark-to-market P&L Once all required fields are valid, the script activates: Real-time profit/loss tracking Max risk estimate Delta monitoring on short legs IV Rank estimate Breach detection system Chart visuals (if enabled) 3. Trade Management (During the Week) While the trade is active, use the dashboard and visuals to monitor: Key Metrics: Unrealized P/L % Mark-to-market value vs entry credit Daily decay (theta) Days until expiration Breach status: In Range Near Breach Breached Alerts: Price near short strike → suggests roll Price breaches long strike → breach alert 50% or 75% profit → optional exit signal Delta exceeds threshold → exposure may need adjustment Management Tips: At 50–75% profit: consider closing early If price nears a short leg: roll, hedge, or manage If nearing expiry: decide whether to hold or close If IV collapses: may accelerate time decay or reduce exit value 4. End-of-Week or Expiration Management If Profit Target Hit Close early to reduce risk and lock gains If Still Open Near Expiry Close the position or Hold through expiration only if you're fully prepared for pinning/gamma/assignment scenarios Avoid holding open spreads over the weekend unless part of a defined strategy Reference Notes Strike Width Defined as: Width = Distance between Short and Long strike Used for calculating max loss and breach visuals Delta Guidelines 0.15–0.20 = safer, wider range, lower credit 0.25–0.30 = more aggressive, tighter range, higher credit Use Target Short Delta input to adjust auto-selected strikes accordingly Credit Example Sell Call: $1.04 Sell Put: $0.23 Buy Call + Put wings: $0.14 Net Credit = $1.13 = $113 per contract (max profit) This is the max profit if price stays between short strikes through expiration IV Rank (Estimated) This script does not use options chain IV data. Instead, it calculates a volatility proxy: ivRaw = ta.stdev(log returns, 20) * sqrt(252) IV Rank is then calculated as the percentile of this value within the last 252 bars. High IV Rank (30%–100%) → better premium-selling conditions Low IV Rank (<30%) → lower edge for condors Ideal to sell premium when IV Rank is above 30–50% Disclosures and Limitations This script is for educational use only It does not connect to live option chains All strikes, deltas, and premiums must be validated through your broker Always confirm real-time IV, delta, and pricing before placing a trade
Indicador Pine Script®
por renderingnature1
EMA KitEMA Kit delivers multiple 1D EMA's wrapped into a single indicator. I was annoyed with having a bunch of EMA indicators on the left side of my chart for each individual EMA I rely on, so I created a single indicator with all of them. This EMA kit allows you to select any combination of the following EMA's: 3D, 5D, 8D, 21D, 34D, 50D, 100D, 200D, and 200W. They are all based on the 1D timeframe regardless of the timeframe you're currently viewing on your chart - for example, if you toggle from a Daily chart to a 15 minute chart, the EMA's won't change to reflect the 15 minute timeframe. EMA Kit smoothes the lines to prevent staggering on lower timeframes. You can change the color scheme and line thickness and even toggle between different line types like area, histogram, etc. You also have the option to turn end-of-line price labels on/off. Current price level for each EMA is highlighted on the price scale.
Indicador Pine Script®
por Makin_Bacon
Pro Momentum Table + Trade Alerts📊 Indicator Name: Pro Momentum Table – ADX + DI + ATR + Astro Timing 🧠 Concept: This indicator is designed for professional scalpers and intraday traders who want to capture only strong momentum waves — not noise. It combines trend strength, volatility, directional movement, momentum oscillation, vega divergence, and astrological timing into a single compact table on your chart. ⚙️ Components Explained: Metric Description ADX (Average Directional Index) Measures the strength of the trend. Values above 20 indicate that a meaningful move is starting. +DI / -DI (Directional Indicators) Show whether buyers (+DI) or sellers (-DI) are dominating. Increasing +DI with ADX rising = bullish momentum. Increasing -DI with ADX rising = bearish momentum. ATR (Average True Range) Shows volatility and expected range. Used for setting realistic stop-loss and multi-level targets (1×, 1.5×, 2×, 2.5× ATR). Price Displays the current price level for quick reference. CMO (Chande Momentum Oscillator) Measures short-term momentum direction and strength. Helps identify overbought/oversold conditions in trend continuation. Vega Divergence Shows a synthetic reading of volatility pressure — "Bullish" when volatility expansion supports upward moves, "Bearish" for downward pressure, and "Neutral" otherwise. Astro Remark Suggests ideal time windows based on planetary cycles for scalping entries. “Bullish Window” often aligns with high-probability long trades; “Bearish Window” favors shorts. Trade Signal The core momentum condition: “Bullish Momentum” if ADX > 20 and +DI rising, “Bearish Momentum” if ADX > 20 and -DI rising, else “No Clear Momentum.” 📈 How to Use: Wait for ADX > 20 – This confirms that the market is entering a strong momentum phase. Check DI direction: ✅ +DI rising: Buyers gaining strength → look for long setups. ✅ -DI rising: Sellers gaining strength → look for short setups. Use ATR to plan exits: 🎯 TP1 = Entry ± 1 × ATR 🎯 TP2 = Entry ± 1.5 × ATR 🎯 TP3 = Entry ± 2 × ATR 🎯 TP4 = Entry ± 2.5 × ATR CMO & Vega Divergence: Confirm momentum direction and volatility expansion before committing. Astro Remark: Align your scalping activity with the planetary support window for higher probability trades. 🪙 Pro Tips for Scalpers: Only trade when ADX > 20 and DI is consistently rising. Ignore signals in choppy or sideways phases. Avoid trades if Vega is neutral and CMO is flat – these usually indicate fake breakouts. If targets aren’t hit within expected ATR-based time, treat the move as false and exit early. Combine with 9 EMA and 20 EMA (hidden) for wave structure confirmation without cluttering the chart. 💡 Summary: This indicator acts as a real-time trade decision dashboard. It removes clutter from the chart and delivers everything a professional scalper needs — strength, direction, volatility, momentum, timing, and actionable trade bias — all in one elegant table.
Indicador Pine Script®
por maheshdevne
Multi-Oscillator Adaptive Kernel with MomentumMulti-Oscillator Adaptive Kernel w. Momentum An adaptation of the indicator by AlphaAlgos : Multi-Oscillator-Adaptive-Kernel (MOAK) with Divergence . Please find the description of the indicator in the above link. Apart from adding labels to show trend/momentum changes, the following changes have been made to the original script: 1. Sensitivity is used in the computation to scale the fast MOAK signal, 2. Selection between two indicator modes: Trending - (the original script method) assesses whether smoothed MOAK is above/below 0 - for up/down trends respectively. Momentum - assesses whether the fast MOAK signal is above/below the smoothed MOAK, and can be used to indicate potential trend reversals as momentum of current trend fades.
Indicador Pine Script®
por Conradious
Pattern Match & Forward Projection – Weekly (EN) Overview This indicator searches for recurring price patterns in weekly data and projects their average forward performance. The logic is based on historical pattern repetition: it scans past price sequences similar to the most recent one, then aggregates their forward returns to estimate potential outcomes. ⚠️ Important: The indicator is designed for weekly timeframe only. Using it on daily or intraday charts will trigger an error message. Settings (Inputs) Pattern Settings Pattern length (weeks): Number of weeks used to define the reference pattern. Forward length (weeks): Number of weeks into the future to evaluate after each pattern match. Lookback (weeks): Historical window to scan for past pattern matches. Normalize by shape (z-score): If enabled, patterns are normalized by z-score, focusing on shape similarity rather than absolute values. Distance threshold (Euclidean): Maximum allowed Euclidean distance between the reference pattern and historical candidates. Smaller values = stricter matching. Min. required matches: Minimum number of valid matches needed for analysis. Quality Filters Min required Hit%: Minimum percentage of positive outcomes (upside forward returns) required for the pattern to be considered valid. Return filter mode: Either: absolute average return ≥ threshold Long only: average return ≥ threshold Short only: average return ≤ -threshold Min avg return (%): Minimum average forward return threshold for validation. Visual Options Highlight historical matches (labels): Marks where in history similar patterns occurred. Max match labels to draw: Caps the number of match markers shown to avoid clutter. Draw average projection: Displays the average projected forward curve if conditions are met. Show summary panel: Enables/disables the information panel. Show weekly avg curve in panel: Adds a breakdown of average returns week by week. Projection color: Choose the color of the projected forward curve. What the Screen Shows Summary Panel (top-left by default) Total matches found in history Matches with valid forward data Average, minimum, and maximum distance (similarity measure) Average forward return and Hit% Distance threshold and normalization setting Weekly average forward curve (if enabled) Quality filter results (pass/fail) Projection Curve (dotted line on price chart) Drawn only if enough valid matches are found and filters are satisfied Represents the average forward performance of historical matches, anchored at the current bar Historical Match Labels (▲ markers) Small arrows below past bars where similar patterns occurred Tooltip: “Historical match” Forecast Logic The indicator does not predict the future in a deterministic way. Instead, it relies on a pattern-matching algorithm: The most recent N weeks (defined by Pattern length) are taken as the reference. The algorithm scans the last Lookback (weeks) for segments with similar shape and magnitude. Similarity is measured using Euclidean distance (optionally z-score normalized). For each valid match, the subsequent Forward length weeks are collected. These forward paths are averaged to generate a composite forward projection. The summary panel reports whether the current setup passes the quality filters (Hit% and minimum average return). Usage Notes Best used as a contextual tool, not a standalone trading system. Works only on weekly timeframe. Quality filters help distinguish between noisy and statistically meaningful patterns. A higher number of matches usually improves reliability, but very strict thresholds may reduce sample size. 📊 This tool is useful for traders who want to evaluate how similar historical setups have behaved and to visualize potential forward paths in a statistically aggregated way.
Indicador Pine Script®
por MarcoPernice
Trend ScalperThe Trend Scalper is a simple EMA-based trend-following and scalping indicator designed to help traders identify potential long and short trading opportunities on any timeframe. It uses a three-EMA strategy to filter trades in the direction of the prevailing trend while refining entry signals based on price reactions to the EMAs. Here’s how it works: It calculates three Exponential Moving Averages (EMA) with customizable lengths (default: 9, 21, and 89). A long signal is generated when the EMAs align in bullish order (EMA1 > EMA2 > EMA3) and the price low dips into the zone between EMA1 and EMA2. This indicates a pullback into short-term support while the broader trend remains bullish. A short signal is generated when the EMAs align in bearish order (EMA1 < EMA2 < EMA3) and the price high rises into the zone between EMA1 and EMA2. This indicates a pullback into resistance within a bearish trend. The EMAs are plotted on the chart for visual guidance, while buy and sell signals are displayed as up and down triangles directly on price bars. Best use practices: The indicator works best as a trend continuation scalping tool, aiming to join established market direction after minor pullbacks. It is most effective on liquid assets and in trending market conditions. Avoid relying on signals during sideways or choppy markets. For confirmation, combine with volume, momentum oscillators, or higher timeframe trend analysis. Risk management is critical: consider setting stop losses beyond EMA zones or recent swing highs/lows, and use take profits that match your risk-reward plan. This indicator provides clean, rule-based signals that help traders time entries within the broader context of the trend. It is not a standalone strategy but a tool to assist in disciplined trade execution.
Indicador Pine Script®
por abedmahmood
EMA/SMA Market Indicator V1 (Situational Awareness Uptrend)Red condition (highest priority in code) Background = red if any of these are true: Close < 10MA OR Close < 20MA OR (10MA and 20MA slopes ≤ threshold → “flat/down”) Green condition (only if not red) Background = green if: (Close > 10MA or Close > 20MA) AND Close > 50MA Otherwise = nothing (transparent) If neither red nor green is true → background is off. So when is there no background? Close is not below 10MA Close is not below 20MA MAs are not both flat/down AND the price fails the “green test” (ex. under 50MA, or not above 10/20).
Indicador Pine Script®
por rienohtrade
Three 20MA (automatically set for each time frame)Three 20MAs (automatically set for each time frame. By using only the 20SMA for each time frame, you can unify how you view the chart and check the consistency of direction between each time frame. 20MA＋ default_ma2 = tf == "1" ? 100 : tf == "5" ? 120 : tf == "15" ? 80 : tf == "30" ? 160 : tf == "60" ? 80 : tf == "240" ? 120 : tf == "D" ? 100 : tf == "W" ? 90 : tf == "M" ? 60 : 80 default_ma3 = tf == "1" ? 300 : tf == "5" ? 240 : tf == "15" ? 320 : tf == "30" ? 960 : tf == "60" ? 480 : tf == "240" ? 600 : tf == "D" ? 400 : tf == "W" ? 400 : tf == "M" ? 240 : 320
Indicador Pine Script®
por hmp5below
1
Uptrick: Volatility Weighted CloudIntroduction The Volatility Weighted Cloud (VWC) is a trend-tracking overlay that combines adaptive volatility-based bands with a multi-source smoothed price cloud to visualize market bias. It provides users with a dynamic structure that adapts to volatility conditions while maintaining a persistent visual record of trend direction. By incorporating configurable smoothing techniques, percentile-ranked volatility, and multi-line cloud construction, the indicator allows traders to interpret price context more effectively without relying on raw price movement alone. Overview The script builds a smoothed price basis using the open, and close prices independently, and uses these to construct a layered visual cloud. This cloud serves both as a reference for price structure and a potential area of dynamic support and resistance. Alongside this cloud, adaptive upper and lower bands are plotted using volatility that scales with percentile rank. When price closes above or below these bands, the script interprets that as a breakout and updates the trend bias accordingly. Candle coloring is persistent and reflects the most recent confirmed signal. Labels can optionally be placed on the chart when the trend bias flips, giving traders additional visual reference points. The indicator is designed to be both flexible and visually compact, supporting different strategies and timeframes through its detailed configuration options. Originality This script introduces originality through its combined use of percentile-ranked volatility, adaptive envelope sizing, and multi-source cloud construction. Unlike static-band indicators, the Volatility Weighted Cloud adjusts its band width based on where current volatility ranks within a defined lookback range. This dynamic scaling allows for smoother signal behavior during low-volatility environments and more responsive behavior during high-volatility phases. Additionally, instead of using a single basis line, the indicator computes two separate smoothed lines for open and close. These are rendered into a shaded visual cloud that reflects price structure more completely than traditional moving average overlays. The use of ALMA and MAD, both less commonly applied in volatility-band overlays, adds further control over smoothing behavior and volatility measurement, enhancing its adaptability across different market types. Inputs Group: Core Basis Length (short-term): The number of bars used for calculating the primary basis line. Affects how quickly the basis responds to price changes. Basis Type: Option to choose between EMA and ALMA. EMA provides a standard exponential average; ALMA offers a centered, Gaussian-weighted average with reduced lag. ALMA Offset: Determines the balance point of the ALMA window. Only applies when ALMA is selected. Sigma: Sets the width of the ALMA smoothing window, influencing how much smoothing is applied. Basis Smoothing EMA: Adds additional EMA-based smoothing to the computed basis line for noise reduction. Group: Volatility & Bands Volatility: Choose between StDev (standard deviation) and MAD (median absolute deviation) for measuring price volatility. Vol Length (short-term): Length of the window used for calculating volatility. Vol Smoothing EMA: Smooths the raw volatility value to stabilize band behavior. Min Multiplier: Minimum multiplier applied to volatility when forming the adaptive bands. Max Multiplier: Maximum multiplier applied at high volatility percentile. Volatility Rank Lookback: Number of bars used to calculate the percentile rank of current volatility. Show Adaptive Bands: Enables or disables the display of upper and lower volatility bands on the chart. Group: Trend Switch Labels Show Trend Switch Labels: Toggles the appearance of labels when the trend direction changes. Label Anchor: Defines whether the labels are anchored to recent highs/lows or to the main basis line. ATR Length (offset): Length used for calculating ATR, which determines label offset distance. ATR Offset (multiplier): Multiplies the ATR value to place labels away from price bars for better visibility. Label Size: Allows selection of label size (tiny to huge) to suit different chart setups. Features Adaptive Volatility Bands: The indicator calculates volatility using either standard deviation or MAD. It then applies an EMA smoothing layer and scales the band width dynamically based on the percentile rank of volatility over a user-defined lookback window. This avoids fixed-width bands and allows the indicator to adapt to changing volatility regimes in real time. Volatility Method Options: Users can switch between two volatility measurement methods: ➤ Standard Deviation (StDev): Captures overall price dispersion, but may be sensitive to spikes. ➤ Median Absolute Deviation (MAD): A more robust measure that reduces the effect of outliers, making the bands less jumpy during erratic price behavior. Basis Type Options: The core price basis used for cloud and bands can be built from: ➤ Exponential Moving Average (EMA): Fast-reacting and widely used in trend systems. ➤ Arnaud Legoux Moving Average (ALMA): A smoother, more centered alternative that offers greater control through offset and sigma parameters. Multi-Line Basis Cloud: The cloud is formed by plotting two individually smoothed basis lines from open and close prices. A filled area is created between the open and close basis lines. This cloud serves as a dynamic support or resistance zone, allowing users to identify possible reversal areas. Price moving through or rejecting from the cloud can be interpreted contextually, especially when combined with band-based signals. Persistent Trend Bias Coloring: The indicator uses the last confirmed breakout (above upper band or below lower band) to determine bias. This bias is reflected in the color of every subsequent candle, offering a persistent visual cue until a new signal is triggered. It helps simplify trend recognition, especially in choppy or sideways markets. Trend Switch Labels: When enabled, the script places labeled markers at the exact bar where the bias direction switches. Labels are anchored either to recent highs/lows or to the main basis line, and spaced vertically using an ATR-based offset. This allows the trader to quickly locate historical trend transitions. Alert Conditions: Two built-in alert conditions are available: ➤ Long Signal: Triggered when the close crosses above the upper adaptive band. ➤ Short Signal: Triggered when the close crosses below the lower adaptive band. These conditions can be used for custom alerts, automation, or external signaling tools. Display Control and Flexibility: Users can disable the adaptive bands for a cleaner layout while keeping the basis cloud and candle coloring active. The indicator can be tuned for fast or slow response depending on the strategy in use, and is suitable for intraday, swing, or position trading. Summary The Volatility Weighted Cloud is a configurable trend-following overlay that uses adaptive volatility bands and a structured cloud system to help visualize market bias. By combining EMA or ALMA smoothing with percentile-ranked volatility and a four-line price structure, it provides a flexible and informative charting layer. Its key strengths lie in the use of dynamic envelopes, visually persistent trend indication, and clearly defined breakout zones that adapt to current volatility conditions. Disclaimer This indicator is for informational and educational purposes only. Trading involves risk and may not be suitable for all investors. Past performance does not guarantee future results.
Indicador Pine Script®
por Uptrick
17
Repulse OB/OS Z-Score (v3)🔹 What this script does This indicator is an enhanced version of the Repulse, originally developed by Eric Lefort. The Repulse measures bullish and bearish pressure in the market by analyzing price momentum and crowd behavior. In this version, I introduce a Z-Score transformation to the Repulse values. The Z-Score converts raw outputs into a standardized statistical scale, allowing traders to identify when pressure is abnormally high or low relative to historical conditions. 🔹 How it works Repulse Core: The original Repulse calculation compares buying vs. selling pressure, highlighting shifts in momentum. Z-Scoring Method: Repulse values are normalized around their mean and scaled by standard deviation. This transforms the indicator into a dimensionless metric, where: Positive Z-Scores indicate stronger-than-usual bullish pressure. Negative Z-Scores indicate stronger-than-usual bearish pressure. Bands: Thresholds such as ±1 or ±2 Z-Scores can help detect when pressure is stretched, potentially signaling exhaustion or reversal points. 🔹 Why it’s useful Statistical Clarity: Traders can instantly see whether current pressure is normal or extreme. Cross-Asset Comparisons: Because Z-Scores are standardized, signals can be compared across different markets or timeframes. Mean Reversion Tool: Extreme Z-Score values often precede turning points, making this a versatile addition to trend and momentum analysis. 🔹 How to use it Apply the indicator to any chart and timeframe. Watch for Z-Scores above +2 (possible overheated bullish pressure) or below –2 (possible oversold/exhaustion). Use these levels as contextual signals, not standalone triggers. Best results come from combining with price structure, support/resistance, or volume analysis. ⚠️ Note: This script does not predict price. It highlights statistical extremes in pressure to support decision-making. Always use in combination with other tools and risk management practices.
Indicador Pine Script®
por S0905B
WASDE DatesOverview WASDE Dates — a small, focused event indicator that displays confirmed USDA WASDE release dates for 2025 on the chart and marks each release day. The indicator is designed to be a lightweight timing tool for traders who want clean visual reminders and optional alerts around USDA WASDE publications. Features • Shows official WASDE release dates for 2025 in a compact chart table. • Draws on-chart markers and a dotted vertical line on WASDE release days. • Two alert conditions you can enable in TradingView: "WASDE Day Alert" and "WASDE 24h Reminder". • Simple table position control (Top/Bottom, Left/Right) in the indicator settings. • Minimal, self-contained code — no external data feeds or permissions required. How to use 1. Apply the indicator to any chart and timeframe. 2. Use the indicator settings to choose table position. 3. Enable Alerts (if desired) via TradingView Alerts → choose “WASDE Day Alert” or “WASDE 24h Reminder”. 4. This version contains 2025 confirmed dates only — verify dates for live trading and enable alerts as needed. Design & rationale This indicator is intentionally not a technical trading signal. It is an event scheduler focused on clarity and low overhead: combine it with your existing setup to avoid being surprised by WASDE publications and to quickly inspect price action around these event dates. Limitations & disclaimer • This script shows **confirmed 2025** WASDE dates only. It does not provide trading advice or entry/exit signals. Use at your own risk. • Double-check official USDA publishing times before executing trades. • No external links or contact information are included in this description to comply with TradingView publishing rules. Feature outlook (V2) Planned V2 (future release): enhanced countdown (days → hours/minutes), optional inclusion of estimated 2026 dates marked as (TBC), and an invite-only/protected advanced version with reaction overlays (T+1/T+3) and extended alert options. V2 will be announced on this script page when ready. Changelog v1 — public release: 2025 confirmed dates, release markers, alerts, table position control.
Indicador Pine Script®
por DerAndi72
Best MA Finder: Sharpe/Sortino ScannerThis script, Best MA Finder: Sharpe/Sortino Scanner, is a tool designed to identify the moving average (SMA or EMA) that best acts as a dynamic trend threshold on a chart, based on risk-adjusted historical performance. It scans a wide range of MA lengths (SMA or EMA) and selects the one whose simple price vs MA crossover delivered the strongest results using either the Sharpe ratio or the Sortino ratio. Reading it is intuitive: when price spent time above the selected MA, conditions were on average more favorable in the backtest; below, less favorable. It is a trend and risk gauge, not an overbought or oversold signal. What it does: - Runs individual long-only crossover backtests for many MA lengths across short to very long horizons. - For each length, measures the total number of trades, the annualized Sharpe ratio, and the annualized Sortino ratio. - Uses the chosen metric value (Sharpe or Sortino) as the score to rank candidates. - Applies a minimum trade filter to discard statistically weak results. - Optionally applies a local stability filter to prefer a length that also outperforms its close neighbors by at least a small margin. - Selects the optimal MA and displays it on the chart with a concise summary table. How to use it: - Choose MA type: SMA or EMA. - Choose the metric: Sharpe or Sortino. - Set the minimum trade count to filter out weak samples. - Select the risk-free mode: Auto: uses a short-term risk-free rate for USD-priced symbols when available. Manual: you provide a risk-free ticker. None: no risk-free rate. - Optionally enable stability controls: neighbor radius and epsilon. - Toggle the on-chart summary table as needed. On-chart output: - The selected optimal MA is plotted. - The optional table shows MA length, number of trades, chosen metric value annualized, and the annual risk-free rate used. Key features: - Risk-adjusted optimization via Sharpe or Sortino for fair, comparable assessment. - Broad MA scan with SMA and EMA support. - Optional stability filter to avoid one-off spikes. - Clear and auditable presentation directly on the chart. Use cases: - Traders who want a defensible, data-driven trend threshold without manual trial and error. - Swing and trend-following workflows across timeframes and asset classes. - Quick SMA vs EMA comparisons using risk-adjusted results. Limitations: - Not a full trading strategy with position sizing, costs, funding, slippage, or stops. - Long-only, one position at a time. - Discrete set of MA lengths, not a continuous optimizer. - Requires sufficient price history and, if used, a reliable risk-free series. This script is open-source and built from original logic. It does not replicate closed-source scripts or reuse significant external components.
Indicador Pine Script®
por Julien_Eche
2
30-10-3 MAX,min dynamicsSupported timeframes: The script works only on timeframes of 1 minute or lower (including second-based timeframes). Displayed levels: The highs and lows of the last closed candle are plotted for the 30-minute, 10-minute, and 3-minute timeframes. Updates: The levels update only when a candle closes in the respective timeframe (e.g., every 30 minutes for the 30m levels). Visualization: Dashed lines for highs and lows (blue for 30m, green for 10m, red for 3m). Labels indicating "Max 30m", "Min 30m", etc., positioned above the highs and below the lows.
Indicador Pine Script®
por waspiv
Period Separator - MTF with Price LevelsPeriod Separator - MTF with Price Levels A customizable multi-timeframe period separator indicator that displays a user-defined number of vertical lines with corresponding horizontal price levels. Key Features: Multi-Timeframe Support: Works with all timeframes from 1-minute to yearly (12M, 3M, M, W, D, 4H, 1H, 15m, 5m, 1m) Complete Price Level Analysis: Shows horizontal lines for High, Low, 0.75, 0.50, 0.25, and Open levels for all visible periods between vertical separators Seconds Chart Compatibility: Special 1-minute separator option for seconds timeframes Full Customization: Independent color, style, and width settings for all lines Smart Alerts: Optional price break alerts for high/low levels with sound options Clean Memory Management: Automatically manages line objects to prevent chart clutter Sliding Window Display: Set exactly how many vertical separator lines to show (1-20), with older lines automatically removed as new periods begin Perfect for: Session/period analysis with controlled visual complexity Support/resistance level identification across multiple periods Fibonacci-style level trading between defined time periods Clean chart presentation with limited historical data display Settings: Number of Vertical Lines: Controls exactly how many period separators are visible All price levels can be toggled on/off independently Comprehensive styling options for professional chart presentation Ideal for traders who want period-based analysis without overwhelming their charts with too many historical lines.
Indicador Pine Script®
por rdk0211
30-10-3 MAX,min dinamici Supported timeframes: The script works only on timeframes of 1 minute or lower (including second-based timeframes). Displayed levels: The highs and lows of the last closed candle are plotted for the 30-minute, 10-minute, and 3-minute timeframes. Updates: The levels update only when a candle closes in the respective timeframe (e.g., every 30 minutes for the 30m levels). Visualization: Dashed lines for highs and lows (blue for 30m, green for 10m, red for 3m). Labels indicating "Max 30m", "Min 30m", etc., positioned above the highs and below the lows.
Indicador Pine Script®
por waspiv
Watermark with Session Boxes (by Rufi)Watermark & Session Boxes - Chart Branding Tool What it does: Combines professional chart watermarking with automated trading session visualization for clean, branded analysis. Key Features: Smart Session Boxes: Auto-draws boxes around Asia (8PM-11:59PM), London (2AM-5AM), and NY (7AM-10AM) sessions using high/low detection Custom Watermark: Professional text overlay with your brand/tagline Full Customization: Adjustable colors, transparency (0-100%), and display limits (1-30 days) How it works: Uses Pine Script's time() function to detect session periods, tracks price extremes during each session, then draws filled rectangles from session high to low. Perfect for identifying key support/resistance levels from major trading periods. Best for: Intraday traders who want branded charts with clear session-based S/R levels. Ideal for forex, indices, and crypto on lower timeframes.
Indicador Pine Script®
por RufiFX