MEMA X-OL9+A. 5, 10, 20, 50 ema's
B. When the 10 goes below the 20 it has shades of red between the 10 and 20.
C. When there is a downward crossover, There will be a Red arrow pointing down.
D. When the 10 is moving closer (upward) towards the 20 it has orange shading. I use this to catch 10 over 20 crossovers.
E. When there is a crossover 10 over 20 it will shade green and have a gold arrow pointing upward. A little redundant, because you'll see the crossover from the shading.
F. Finally there will be smaller blue arrows that represent when there is a close of a candle, if it is lower than the prior candle.
All customizable and defaults should work.
Medias móviles
EMA Percentile Rank [SS]Hello!
Excited to release my EMA percentile Rank indicator!
What this indicator does
Plots an EMA and colors it by short-term trend.
When price crosses the EMA (up or down) and remains on that side for three subsequent bars, the cross is “confirmed.”
At the moment of the most recent cross, it anchors a reference price to the crossover point to ensure static price targets.
It measures the historical distance between price and the EMA over a lookback window, separately for bars above and below the EMA.
It computes percentile distances (25%, 50%, 85%, 95%, 99%) and draws target bands above/below the anchor.
Essentially what this indicator does, is it converts the raw “distance from EMA” behavior into probabilistic bands and historical hit rates you can use for targets, stop placement, or mean-reversion/continuation decisions.
Indicator Inputs
EMA length: Default is 21 but you can use any EMA you prefer.
Lookback: Default window is 500, this is length that the percentiles are calculated. You can increase or decrease it according to your preference and performance.
Show Accumulation Table: This allows you to see the table that shows the hits/price accumulation of each of the percentile ranges. UCL means upper confidence and LCL means lower confidence (so upper and lower targets).
About Percentiles
A percentile is a way of expressing the position of a value within a dataset relative to all the other values.
It tells you what percentage of the data points fall at or below that value.
For example:
The 25th percentile means 25% of the values are less than or equal to it.
The 50th percentile (also called the median) means half the values are below it and half are above.
The 99th percentile means only 1% of the values are higher.
Percentiles are useful because they turn raw measurements into context — showing how “extreme” or “typical” a value is compared to historical behavior.
In the EMA Percentile Rank indicator, this concept is applied to the distance between price and the EMA. By calculating percentile distances, the script can mark levels that have historically been reached often (low percentiles) or rarely (high percentiles), helping traders gauge whether current price action is stretched or within normal bounds.
Use Cases
The EMA Percentile Rank indicator is best suited for traders who want to quantify how far price has historically moved away from its EMA and use that context to guide decision-making.
One strong use case is target setting after trend shifts: when a confirmed crossover occurs, the percentile bands (25%, 50%, 85%, 95%, 99%) provide statistically grounded levels for scaling out profits or placing stops, based on how often price has historically reached those distances. This makes it valuable for traders who prefer data-driven risk/reward planning instead of arbitrary point targets. Another use case is identifying stretched conditions — if price rapidly tags the 95% or 99% band after a cross, that’s an unusually large move relative to history, which could signal exhaustion and prompt mean-reversion trades or protective actions.
Conversely, if the accumulation table shows price frequently resides in upper bands after bullish crosses, traders may anticipate continuation and hold positions longer . The indicator is also effective as a trend filter when combined with its EMA color-coding : only taking trades in the trend’s direction and using the bands as dynamic profit zones.
Additionally, it can support multi-timeframe confluence (if you align your chart to the timeframes of interest), where higher-timeframe trend direction aligns with lower-timeframe percentile behavior for higher-probability setups. Swing traders can use it to frame pullbacks — entering near lower percentile bands during an uptrend — while intraday traders might use it to fade extremes or ride breakouts past the median band. Because the anchor price resets only on EMA crosses, the indicator preserves a consistent reference for ongoing trades, which is especially helpful for managing swing positions through noise .
Overall, its strength lies in transforming raw EMA distance data into actionable, probability-weighted levels that adapt to the instrument’s own volatility and tendencies .
Summary
This indicator transforms a simple EMA into a distribution-aware framework: it learns how far price tends to travel relative to the EMA on either side, and turns those excursions into percentile bands and historical hit rates anchored to the most recent cross. That makes it a flexible tool for targets, stops, and regime filtering, and a transparent way to reason about “how stretched is stretched?”—with context from your chosen market and timeframe.
I hope you all enjoy!
And as always, safe trades!
SMAs, EMAs, 52W High Low, CPRThis is all in one indicator which has SMAs, EMAs, CPR, Trend ribbon and SuperTrend.
We are adding other indicator in upcoming days.
EMA多空趋势信号The EMA multi-period moving average combination retains the Fibonacci sequence 144 for moving support and resistance. It also integrates 1ATR to facilitate users to set take-profit and stop-loss.
Signalgo VSignalgo V: Technical Overview and Unique Aspects
Signalgo V is a technical indicator for TradingView that integrates multiple layers of analysis: moving averages, MACD, Bollinger Bands and RSI to deliver buy and sell signals. Below is an informational breakdown of how the indicator functions, its input parameters, signal logic, exit methodology, and how it stands apart from traditional moving average (MA) tools, without disclosing specifics that allow for code duplication.
How Signalgo V Works
1. Multi-Layered Technical Synthesis
Signalgo V processes several technical studies simultaneously:
Fast/Slow Moving Averages: Uses either EMA or SMA (user-selected) with adjustable periods. These are central to initial trend detection through crossovers.
MACD Filter: MACD line vs. signal line cross-check ensures trend direction is supported by both momentum and MA structure.
RSI Confirmation: The RSI is monitored to verify that signals are not excessively overbought or oversold, tuning the system to changing momentum regimes.
Bollinger Bands Context: Entry signals are only considered when price action is beyond the Bollinger Bands envelope, which further filters for unusually strong movements.
These strict, multi-indicator entry criteria are designed to ensure only the most robust signals are surfaced, each is contingent on the presence of aligned trend, momentum and volatility.
2. Exit Methodology
Take-Profit Levels: After entering a trade, the strategy automatically sets three predefined profit targets (TP1, TP2, TP3). If the price reaches any of these targets, the system marks it, helping you lock in profits at different stages.
Stop-Loss System: Simultaneously, a stop-loss (SL) value is set, protecting you from significant losses if the market moves against your position.
Dynamic Adjustment: When the first profit target (TP1) is hit, the system can automatically move the stop-loss to your entry price. This means your worst-case outcome is break-even from that point, reducing downside risk.
Trailing Stop-Loss: After TP1 is reached, a dynamic trailing stop can activate. This allows the stop-loss to follow the price as it moves in your favor, aiming to capture more profit if the trend continues, while still protecting your gains if the price reverses.
Visual Markers: The system plots all important exit levels (profit targets, stop-loss, trailing stop) directly on the chart. Optional labels also appear whenever a target or stop-loss is hit, making it easy to see progress.
Visual cues (labels) are plotted directly on the bar where a buy or sell signal triggers, clarifying entry points and aiding manual exit/risk management decisions.
Input Parameters
rsiLen: Lookback period for RSI calculation.
rsiOB and rsiOS: Overbought/oversold thresholds, adaptive to the indicator’s multi-layered logic.
maFastLen and maSlowLen: Periods for fast and slow MAs.
maType: EMA or SMA selectable for both MAs.
bbLen: Length for Bollinger Bands mean calculation.
bbMult: Standard deviation multiplier for BB width.
macdFast, macdSlow, macdSig: Standard MACD parameterization for nuanced momentum oversight.
What Separates Signalgo V from Traditional Moving Average Indicators
Composite Signal Architecture: Where traditional MA systems generate signals solely on MA crossovers, Signalgo V requires layered, cross-confirmational logic across trend (MAs), momentum (MACD), volatility (Bollinger Bands), and market strength (RSI).
Adaptive Volatility Context: MA signals only “count” when price is meaningfully breaking out of its volatility envelope, filtering out most unremarkable crosses that plague basic MA strategies.
Integrated Multi-Factor Filters: Strict compliance with all layers of signal logic is enforced. A marked improvement over MA strategies that lack secondary or tertiary confirmation.
Non-Redundant Event Limiting: Each entry is labeled as a unique event. The indicator does not repeat signals on subsequent bars unless all entry conditions are freshly met.
Trading Strategy Application
Trend Identification: By requiring concurrence among MA, MACD, RSI, and BB, this tool identifies only those trends with robust, multifactor support.
Breakout and Momentum Entry: Signals are bias-toward trades that initiate at likely breakout points (outside BB range), combined with fresh momentum and trend alignment.
Manual Discretion for Exits: The design is to empower traders with high-confidence entries and leave risk management or partial profit-taking adaptive to trader style, using visual cues from all component indicators.
Alert Generation: Each buy/sell event optionally triggers an alert, supporting systematic monitoring without constant chart watching.
YZH Dual MA Combo Signal📌 YZH Dual MA Combo Signal – Indicator Overview
The YZH Dual MA Combo Signal is a multi–moving average trading tool designed to detect price action setups confirmed by candle wick structures. It combines three customizable moving averages (MA1, MA2, MA3) and generates precise entry signals when price interacts with them under specific conditions.
🔑 Key Features
Multiple Moving Average Options
Supports SMA, EMA, WMA, HMA, RMA, VWMA.
Users can configure up to 3 moving averages with adjustable periods, colors, and line thickness.
Wick Filter for Candle Validation
Uses a wick-to-body ratio filter to ensure signals only trigger with meaningful rejection candles.
Example: Strong long wick at support/resistance near a moving average.
3 Combo Structures
MA1–MA2 combo
MA2–MA3 combo
MA1–MA3 combo
Each combo has its own setup & trigger logic, giving flexibility for trend continuation or reversal trades.
Setup & Trigger Logic
Setup: Price interacts with the chosen moving average with a valid wick rejection.
Trigger: Confirmation occurs within a defined number of candles (default = 5 bars) if price breaks above/below the setup level.
Prevents false signals by requiring both wick rejection and follow-up confirmation.
Signal Visualization
Triangles (▲▼) for confirmed long/short entries.
Optional circles to display setup points before triggers.
Color-coded moving averages with customizable visibility.
Information Dashboard (optional)
Displays real-time status of all three MA combinations.
Helps traders quickly identify which combo is currently active.
Alerts & Automation Ready
Sends detailed alerts with symbol, timeframe, signal type (LONG/SHORT), combo type, price, and timestamp.
Compatible with TradingView’s alertcondition for automated trading systems or external integrations.
⚡ Trading Edge
Ideal for traders who use wick rejections + moving average confirmations.
Filters out weak setups and focuses only on high-probability signals.
Can be applied in scalping, swing trading, or trend-following strategies across all markets (forex, crypto, stocks, indices).
Flowcast by gfund.aiFlowcast by gfund.ai
Introducing Flowcast : A powerful moving average indicator designed to help you master the market's flow with unprecedented clarity.
At its heart is our proprietary blend of moving averages , an engine engineered to synergize predictive speed with a smooth, stable trend foundation. This unique combination translates complex market dynamics into a simple, actionable visual.
How to read the Flowcast ribbon:
Green Ribbon : Signals a potential bullish trend.
Red Ribbon : Signals a potential bearish trend.
The ribbon's thickness provides a real-time gauge of momentum. A thickening ribbon suggests a strengthening trend, while a thinning ribbon signals consolidation or a potential reversal.
Stop reacting and start anticipating. Flowcast is designed to deliver crystal-clear, early signals, giving you the intuitive edge to navigate the markets with confidence.
LUCID LION TRINITY V1The LUCID LION TRINITY V1 is a precision trading tool designed to simplify decision-making and enhance trade execution through clear entry, stop-loss, and multi-target profit zones.
This indicator combines a dynamic EMA trend filter with ATR-based risk management, giving traders a structured approach to spotting setups and managing trades effectively.
Core Features
• Automatic Buy & Sell Signals
• Buy signals appear when price crosses above the EMA.
• Sell signals appear when price crosses below the EMA.
• Risk Management Built In
• ATR-based Stop Loss ensures volatility-adjusted protection.
• Fully configurable ATR length & multiplier.
• Multi-Level Take Profits (TP1, TP2, TP3)
• TP1 aligns with your chosen Risk:Reward ratio.
• TP2 & TP3 extend profits for trend continuation.
• Adjustable multipliers to fit your style.
• Visual Trade Levels
• EMA trend confirmation.
• Stop Loss and TP levels plotted on chart.
• Clear entry markers for easy reference.
• Alerts Ready
• Instant notifications for Buy and Sell setups.
How to Use
1. Watch for a BUY or SELL signal.
2. Manage the trade using the plotted Stop Loss and TP zones.
3. Scale out at TP1, TP2, and TP3 to secure profits.
4. Always combine with your own analysis for best results.
Important Note
The LUCID LION TRINITY V1 does not guarantee profitable trades. It highlights potential entry and exit areas, but proper risk management and additional analysis are required.
📩 To gain access, email: lucidlionllc@icloud.com
Disclaimer
The LUCID LION TRINITY V1 indicator is provided strictly for educational and informational purposes only. It is not financial advice and should not be considered a recommendation to buy or sell any financial instrument.
Trading financial markets involves significant risk. Past performance does not guarantee future results. Use this tool at your own risk and always apply proper risk management.
Terms of Use
By purchasing or gaining access to the LUCID LION TRINITY V1, you agree to the following:
1. Educational Use Only – This tool is for educational purposes and not investment advice.
2. No Profit Guarantee – Results are not guaranteed. Market conditions vary.
3. User Responsibility – You are solely responsible for your trading decisions. Lucid Lion LLC is not liable for outcomes.
4. Non-Transferable Access – Access is for personal use only; redistribution is prohibited.
5. Risk Disclosure – Trading carries risk. Trade only with money you can afford to lose.
6. Refund Policy – All purchases are final. No refunds will be issued.
ORB + Strat + Ripster Cloud DashboardDashboard so I can see better using the methods in the description
ExoCloudGet a clearer market perspective with ExoCloud, a lightweight indicator that visualizes the interplay between two adaptive moving averages as a color‑shaded cloud. **Green clouds** signal bullish momentum when the faster average is above the slower one, while **red clouds** highlight bearish pressure when the faster average drops below. Built for traders who prefer simplicity without sacrificing precision.
---
🔑 Key Features
Immediate Trend Visualization – The cloud instantly reveals market bias.
Multi‑Timeframe Mode– Overlay higher‑TF clouds on lower‑TF charts for confluence.
Adaptive Alerts– Real‑time notifications when bullish or bearish shifts occur.
Configurable Color Theme – Align cloud and baseline hues with your chart style.
---
🔔 Alerts
Cloud Bounce (Buy / Sell) – Price pulls back into the cloud and then rebounds in the prevailing trend, offering high‑probability continuation entries.
Cloud Flip (Bullish / Bearish) – The cloud color flips when momentum decisively changes sides, flagging early trend reversals once structure confirms.
Cloud Storm (Multi‑TF) – A lower‑time‑frame cloud crosses a higher one, creating cross‑time‑frame “storm” alerts that capture volatility expansions and breakout conditions.
---
🧩 Strategy Edge
1. Trend Filter – Execute longs only during green clouds and shorts during red clouds.
2. Pullback Entries – Wait for price to revisit the cloud, then trade in the prevailing direction.
3. Early Reversals – Watch for cloud color flips combined with volume expansion.
HawkEye EMA Cloud
# HawkEye EMA Cloud - Enhanced Multi-Timeframe EMA Analysis
## Overview
The HawkEye EMA Cloud is an advanced technical analysis indicator that visualizes multiple Exponential Moving Average (EMA) relationships through dynamic color-coded cloud formations. This enhanced version builds upon the original Ripster EMA Clouds concept with full customization capabilities.
## Credits
**Original Author:** Ripster47 (Ripster EMA Clouds)
**Enhanced Version:** HawkEye EMA Cloud with advanced customization features
## Key Features
### 🎨 **Full Color Customization**
- Individual bullish and bearish colors for each of the 5 EMA clouds
- Customizable rising and falling colors for EMA lines
- Adjustable opacity levels (0-100%) for each cloud independently
### 📊 **Multi-Layer EMA Analysis**
- **5 Configurable EMA Cloud Pairs:**
- Cloud 1: 8/9 EMAs (default)
- Cloud 2: 5/12 EMAs (default)
- Cloud 3: 34/50 EMAs (default)
- Cloud 4: 72/89 EMAs (default)
- Cloud 5: 180/200 EMAs (default)
### ⚙️ **Advanced Customization Options**
- Toggle individual clouds on/off
- Adjustable EMA periods for all timeframes
- Optional EMA line display with color coding
- Leading period offset for cloud projection
- Choice between EMA and SMA calculations
- Configurable source data (HL2, Close, Open, etc.)
## How It Works
### Cloud Formation
Each cloud is formed by the area between two EMAs of different periods. The cloud color dynamically changes based on:
- **Bullish (Green/Custom):** When the shorter EMA is above the longer EMA
- **Bearish (Red/Custom):** When the shorter EMA is below the longer EMA
### Multiple Timeframe Analysis
The indicator provides a comprehensive view of trend strength across multiple timeframes:
- **Short-term:** Clouds 1-2 (faster EMAs)
- **Medium-term:** Cloud 3 (intermediate EMAs)
- **Long-term:** Clouds 4-5 (slower EMAs)
## Trading Applications
### Trend Identification
- **Strong Uptrend:** Multiple clouds stacked bullishly with price above
- **Strong Downtrend:** Multiple clouds stacked bearishly with price below
- **Consolidation:** Mixed cloud colors indicating sideways movement
### Entry Signals
- **Bullish Entry:** Price breaking above bearish clouds turning bullish
- **Bearish Entry:** Price breaking below bullish clouds turning bearish
- **Confluence:** Multiple cloud confirmations strengthen signal reliability
### Support/Resistance Levels
- Cloud boundaries often act as dynamic support and resistance
- Thicker clouds (higher opacity) may provide stronger S/R levels
- Multiple cloud intersections create significant price levels
## Customization Guide
### Color Schemes
Create your own visual style by customizing:
1. **Bullish/Bearish colors** for each cloud pair
2. **Rising/Falling colors** for EMA lines
3. **Opacity levels** to layer clouds effectively
### Recommended Settings
- **Day Trading:** Focus on Clouds 1-2 with higher opacity
- **Swing Trading:** Use Clouds 1-3 with moderate opacity
- **Position Trading:** Emphasize Clouds 3-5 with lower opacity
## Technical Specifications
- **Version:** Pine Script v6
- **Type:** Overlay indicator
- **Calculations:** Real-time EMA computations
- **Performance:** Optimized for all timeframes
- **Alerts:** Configurable long/short alerts available
## Risk Disclaimer
This indicator is for educational and informational purposes only. Always combine with proper risk management and additional analysis before making trading decisions. Past performance does not guarantee future results.
---
*Enhanced and customized version of the original Ripster EMA Clouds by Ripster47. This modification adds comprehensive color customization and enhanced user control while preserving the core analytical framework.*
Multi VWAP V2 By TRADESAFEAI - NVWAPOVERVIEW:
This indicator displays Volume Weighted Average Price (VWAP) across multiple timeframes simultaneously, with historical "naked" levels that persist as support/resistance zones.
FEATURES:
- Current VWAPs: Daily, Weekly, Monthly, Quarterly, Yearly
- Naked VWAPs: Historical levels from previous sessions that extend until touched by price
- Smart labeling with priority system to prevent overlapping text
- Customizable colors, line styles, and transparency for all timeframes
- Configurable lookback periods with time-based or bar-based limits
SETTINGS:
Main Controls: Toggle current VWAP lines and naked levels independently
VWAP Styles: Customize colors, widths, and line styles for each timeframe
Naked Styles: Adjust appearance and transparency of historical levels
Labels: Show/hide labels with customizable text and positioning
Lookback Limits: Control how far back naked levels extend
USAGE:
Naked VWAP levels act as dynamic support/resistance zones. When price approaches these levels, they often provide significant reaction points. The priority system ensures only the most relevant timeframe label shows when levels cluster together.
For access: Requires subscription. Please visit TRADESAFEAI.IO
Contact: X.com/Notofworks7
SMA-Based Candle Color 60The Trend SMA colors the moving average green when sloping upward and red when sloping downward. Candles are also colored based on whether price is above (green) or below (red) the SMA, making trends easy to spot.
SMA-Based Candle Color 60The Trend SMA colors the moving average green when sloping upward and red when sloping downward. Candles are also colored based on whether price is above (green) or below (red) the SMA, making trends easy to spot.
Intraday Scalping Trading System with AlertsThis is a unique script in the way it signals and alert on Volume Imbalances and VWAP based out on ATR. Many professional traders consider Volume Imbalance as a great indicator to identify stock movement.
I didn't find any indicator or all these option together so created one for us.
1. Fully controllable with toggle buttons.
2. Choose you best Trading directional signals with filters as per your sentiments -
2. EMA crossings
- EMA crossings + VWAP confirmation
- EMA crossings + SuperTrend Confirmation
3. Highest and Lowest volumes visually appeared
4. OHLCs Daily, Weekly and Monthly line options
5. First Candle Range - you can choose First candle range and it's time frame (default IST 9:15 but you can customize in pinescript as per your preferred Time Zone or just hide with toggle button.
FTA KAMA/ER TABLEusing kauffmans effenciency ratio and adaptive moving average logic ive created a table that shows the strength of trend via numerical values on the table , turn off the bg colors
WMA 5/10/30/40/80/1006 WMAs on the chart: 5, 10, 30, 40, 80, and 100 — each in its own color.
This indicator plots multiple Weighted Moving Averages (WMA) on the price chart: 5, 10, 30, 40, 80, and 100.
Shorter WMAs (5 & 10) react quickly to price changes and are useful for short-term trend detection.
Longer WMAs (30, 40, 80, 100) help identify medium- to long-term trends and dynamic support/resistance zones.
Traders often watch for crossovers between short-term and long-term WMAs as potential trade signals.
The IndicatorThe Indicator is a real-time, near zero-lag momentum tool. It shows when the market is Balanced, Bullish or Bearish. The signals are not buy or sell prints but are instead visuals for underlying strength.
The Indicator is powered by two engines that work in tandem. The first is the Bias Engine. It continuously evaluates 25+ factors to show whether the market is Bullish (green), Bearish (red), or Balanced (orange). This bias is displayed directly on the EMA line and is always active — it’s the foundation of the system.
The second is the Heatmap Engine. It reacts to shifts in buying and selling pressure, painting bars green, red, or orange to show who has control in real time. Users can adjust the sensitivity to see fast reactions (Aggressive), a steady middle ground (Balanced), or only stronger moves (Strict).
The Momentum Core, which is on by default, combines both engines into one. By blending the Bias Engine with the Heatmap, it delivers a faster, clearer output that highlights conviction as soon as it appears. This helps you see not just direction, but the moment momentum truly takes over.
“The engines use a series of colors to display market bias. GREEN = Bullish bias, RED = Bearish bias, ORANGE = Balanced bias. It is important to expect more noise in a Balanced zone. The Indicator does the heavy lifting by processing 25+ factors in real time, so you don’t have to guess what side has control. Instead of juggling multiple indicators or signals, you get a single, unified read of momentum as it’s happening.”
Leaders DashboardA compact, glanceable leadership dashboard for monitoring market health via your hand-picked “Top 8” stocks. It tracks trend posture and momentum using practical checks (21-EMA, 50-DMA, rising 21, and proximity to highs), plus optional QQQ/SPY benchmark rows , all in a clean, color-forward table that sits on your chart.
What it shows
Sym – your 8 symbols (short format).
>21 – price above the 21-EMA.
>50 – price above the 50-DMA.
↑21 – 21-EMA sloping up.
ΔX% – within X% of high (default logic: ATH; switchable to N-bar High).
Price – last price (toggleable).
Σ Totals row (optional) – counts “passes” across your 8 names for each column, with Neutral or Majority shading.
Benchmarks (QQQ/SPY) are optional rows for context and do not contribute to totals.
Built for signal at a glance
Color-first cells with minimal ink: defaults to labels OFF and ✓ / ✗ markers ON.
Δ% header is compact (e.g., Δ2%) to save space.
Position & size: snap to any chart corner; Tiny/Small/Medium/Large font presets.
Per-column toggles: show/hide any column to match your workflow.
Controls (key inputs)
Symbols: 8 user slots (use exchange prefixes, e.g., NASDAQ:PLTR).
Benchmark rows: None / QQQ / SPY / Both (not counted in Σ).
Table position & size: four corners; Tiny → Large font presets.
Opacity mode:
Per-color (default) – honors each color picker’s opacity (PF/W defaults set to 50%).
Global – one slider controls transparency across the whole table.
YES/NO labels: off by default.
Cell marker: None / Dot / Check/X (default).
Show Price: on by default.
Show totals row (Σ): on by default; Totals color mode = Neutral or Majority.
Δ% logic: choose ATH or N-bar High and set the % threshold and lookback.
How to use it
Drop it on any timeframe; the stats are computed on your current chart timeframe for each symbol.
Enter your 8 leaders (e.g., AVGO, GEV, HOOD, MSFT, NVDA, PLTR, RBLX, TSM) and optionally add QQQ/SPY.
Keep labels off with Check/X markers for a clean, color-driven read.
Watch the Σ row:
- 6/8 passing on >21, >50, and ↑21 suggests healthy leadership breadth.
- A high Δ% count means many leaders are pressing highs.
Notes & tips
If a symbol shows as invalid, confirm the exchange prefix (e.g., NASDAQ:, NYSE:, AMEX:).
ATH proximity uses up to 10,000 bars; switch to N-bar High if you prefer a rolling window.
The table is an overlay; use opacity/size to keep it unobtrusive over price.
Disclaimer: For educational/information purposes only. This script does not provide financial advice, nor does it place or manage orders. Always do your own research.
Simple SMA StrategySimple strategy to buy based on closing above SMA, and sell based on closing below SMA.
You can change the SMA value and your start date to customize the strategy for your initial entry date and SMA value. SMA is based on chart time frame.
SPX EMA 9/21 + VWAP Strategy1. Temporality: 2 minutes.
2. EMA 9 and EMA 21:
• Purchase Call: when EMA 9 crosses up EMA 21 and the price is > VWAP.
• Put : when EMA 9 crosses down EMA 21 and the price is < VWAP.
3. Stop and Take Profit:
• Stop: candle closure on the other side of the VWAP.
• TP: configurable in points (e.g. +10 pts, +20 pts) or up to the opposite crossing of EMAs.
• Long enters when EMA 9 crosses up 21 and the price is above VWAP.
• Short enters when the EMA 9 crosses down the 21 and the price is below VWAP.
• TP and SL in SPX points (configurable in inputs).
• You can run in 2 minutes on SPX.
EMA vs TMA Regime FilterEMA vs TMA Regime Filter
This indicator is built as a visual study tool to compare the behavior of the Exponential Moving Average (EMA) and the Triangular Moving Average (TMA).
The EMA applies an exponential weighting to price data, giving stronger importance to the most recent values. This makes it a faster, more responsive line that reflects short-term momentum. The TMA, by contrast, applies a double-smoothing process (or in the “True TMA” option, a split SMA sequence), which produces a much slower curve. The TMA emphasizes balance over reactivity, often used for filtering noise and observing longer-term structure.
When both are plotted on the same chart, their differences become clear. The shaded region between them highlights times when short-term price dynamics diverge from longer-term smoothing. This is where the idea of “regime” comes in — not as a trading signal, but as a descriptive way of seeing whether market action is currently dominated by speed or by stability.
Users can customize:
Line styles, widths, and colors.
Cloud transparency for visual clarity.
Whether to color bars based on relative position (optional, purely visual).
The goal is not to create a system, but to help traders experiment, observe, and learn how different smoothing techniques can emphasize different aspects of price. By switching between the legacy and true TMA, or adjusting lengths, users can study how each approach interprets the same data differently.
