ATR Momentum Status v.2ATR Momentum Status Version 2 locked ATR Momentum Status (Bar-Close Confirmed)
In previous versions, the ATR momentum status could change intrabar while the candle was still forming. In v.2, the ATR momentum is calculated only after the candle closed and is locked until the next candle closes.
Why this matters:
Prevents repainting or intrabar flipping
Ensures what you see on the dashboard is fully confirmed
Makes replay mode and backtesting reliable
How Traders Use It:
This tool is best used as a confirmation layer, not a standalone signal. Common use cases:
- Confirming FVG / CE acceptance
- Validating displacement candles
- Filtering trades to only Strong / Expansion conditions
- Avoiding entries during weak or declining volatility
Key Concept:
Price can move without momentum, but momentum confirms intent. With the ATR status locked after candle close, v.2 ensures every ATR reading represents real, confirmed market participation, making it safer for execution-based strategies.
Educational
Position and Leverage Size CalculatorThis script is assist you to see approximate position and leverage size while trading in prop firms.
Bear & Bull Builder // visual strategy builderAre you a trend follower?
Trend following systems have been a cornerstone of trading since the first candlestick charts were invented in 18th-century Japan by Munehisa Homma (or Honma), a legendary rice merchant who used them to analyze market sentiment and predict price movements. Since then, legendary traders like Richard Dennis and Dr. David Paul have used technical analysis—the study of turning points and trends of candlestick charts—to develop an edge and strategy for trading equity, commodity, and forex markets.
How to Utilize the Bear & Bull Builder
This script is a way to pick and choose technical methods like SMAs and EMAs to define trend exits and entries. Additionally, you can specify an ATR (Average True Range) calculated stop loss based on your individual strategy and trading plan. Within the settings panel, you can set up this script to display only Long Position values, zones, and levels—or configure it for shorts, or both.
What Makes This Original
Unlike most trend-following indicators that lock you into a single approach, this script lets you combine different indicator types (RSI, WaveTrend, CCI, EMA, SMA) across three separate trend timeframes. The originality comes from the flexibility: you can test whether momentum-based trends (like RSI) work better than moving averages for your timeframe, or experiment with mixing them together. The script also bridges the gap between manual trading and automation by providing visual position values and fill zones that show exactly where signals generate versus where orders execute—critical information most scripts ignore.
Getting Started
For this quick and easy setup example, I built a strategy that is long-only, displays only long positional data and values, and uses a 21 & 55 period exponential moving average for the short and medium-term trend in addition to an 89 period simple moving average for my longer-term outlook. I have set my ATR-based multiplier to 0.75, and have left the fill zone display turned on to help visualize when to set up the built-in alerts for automating my strategy. I have made this the default settings of the script.
Positional Values
GREEN NUMBERS → Entry signal price
YELLOW NUMBERS → Stop loss price
BLUE NUMBERS → Exit signal price
IMPORTANT
I cannot describe how useful it is to use TradingView's built-in Long and Short position tools! The whole reason for this script is that it is as manually friendly as it is automated—especially for backtesting. You can use the long position tool to measure exact profits and losses on individual trades for the strategies you build. This can really help you see clearly if you have built a system with positive expectancy.
Tables
1. Settings Display Table
Displays the trend types that are configurable in the settings panel. Shows if positional values for longs and shorts are currently displayed.
2. Back testing Table
Displays the total amount of long and short entry signals since the first bar of the chart. Additionally, it displays the average amount of bars per trade (time in trade).
Alerts & Automation
There are 4 built-in alerts for automating your strategy to an external server:
1.Long Entries
2.Long Exits
3.Short Entries
4.Short Exits
Since this script uses confirmed bar states for alert generation (to avoid repainting), all alerts and displayed position values (the green, yellow, and blue numbers) will be sent on the closing price. Each alert has a placeholder preset for further customization.
Technical Details
How the trend detection works:
Bullish state triggers when close > all three selected trends
Bearish state triggers when close < all three selected trends
Uses barstate.isconfirmed to prevent repainting
Stop loss calculation:
Long stops: highest_trend - (ATR × multiplier)
Short stops: lowest_trend + (ATR × multiplier)
ATR period is fixed at 20 bars, multiplier is user-adjustable
Entry placement logic:
Long entries execute at the highest value among the three selected trends
Short entries execute at the lowest value among the three selected trends
This ensures entries occur near the support/resistance created by the trend lines
Why calculate all indicators upfront:
The script calculates all five indicator types (EMA, SMA, RSI, CCI, WaveTrend) for all three trend lengths on every bar, then selectively uses the ones you choose in settings. This prevents Pine Script consistency warnings while maintaining flexibility.
ATR Momentum StatusThis indicator measures whether volatility (ATR) is increasing or decreasing, and classifies momentum strength into four clear states:
- WEAK
- STRONG
- EXPANSION
- DECREASING
It helps traders avoid fake moves and only trade when real participation enters the market, especially when used together with FVG CE Acceptance (SMC).
ATR Momentum States (Very Important)
Status Meaning Market Condition
WEAK Small ATR increase Low participation
STRONG Healthy ATR increase Real buyers/sellers entering
EXPANSION Large ATR spike Aggressive momentum / breakout
DECREASING ATR falling Momentum dying / trap risk
What This Indicator Is NOT
❌ Not a buy/sell signal
❌ Not direction bias
❌ Not entry by itself
👉 It is a trade quality filter
✅ Best Use Case (SMC / FVG Traders)
This indicator shines when combined with:
- FVG
- CE (Consequent Encroachment)
- Liquidity Sweep
- Acceptance Candle
Important Risk Filter (Golden Rule):
ATR Status Trade Quality
EXPANSION + Acceptance ⭐⭐⭐⭐⭐ (Best)
STRONG + Acceptance ⭐⭐⭐⭐
WEAK + Acceptance ❌ Avoid
DECREASING ❌ No Trade
Why This Works (Conceptually):
- FVG CE acceptance = price is accepted
- ATR expansion = participation is real
- Together = institutional momentum, not retail noise
Gold Projection DivergenceGOLD PROJECTION DIVERGENCE
Oscillator Companion for the Gold Macro Projection Model
OVERVIEW
The Gold Projection Divergence oscillator quantifies how far gold is trading from its projected fair value. While the main indicator shows where gold should be, this oscillator shows how extreme the mispricing is—providing precise timing signals for entries and exits.
HOW IT WORKS
The oscillator calculates the difference between actual gold price and the projected value, then normalizes it as a Z-score . This statistical measure shows how many standard deviations gold is trading away from its projected fair value.
Z > +2 — Gold is 2+ standard deviations above fair value (extremely overvalued)
Z > +1 — Gold is moderately overvalued
Z = 0 — Gold is trading at projected fair value
Z < -1 — Gold is moderately undervalued
Z < -2 — Gold is 2+ standard deviations below fair value (extremely undervalued)
VISUAL ELEMENTS
Histogram — Color-coded divergence magnitude
Yellow Line — Smoothed Z-score
Dashed Lines — +2 and -2 standard deviation levels
Dotted Lines — +1 and -1 standard deviation levels
Triangle Markers — Extreme crossover signals
Circle Markers — Zero-line crossings
HISTOGRAM COLORS
Dark Red — Z > +2 (extreme overvaluation)
Orange — Z between +1 and +2
Light Orange — Z between 0 and +1
Light Green — Z between -1 and 0
Green — Z between -2 and -1
Lime — Z < -2 (extreme undervaluation)
COMPONENT TABLE
The breakdown table shows divergence from each individual factor:
Silver — Is gold over/undervalued relative to silver?
M2 — Is gold over/undervalued relative to money supply?
DXY — Is gold over/undervalued relative to dollar strength?
Equity — Is gold over/undervalued relative to stocks?
TIPS — Is gold over/undervalued relative to real rates?
TRADING APPLICATIONS
Mean Reversion Strategy
Enter LONG when Z < -2 and begins rising
Enter SHORT when Z > +2 and begins falling
Use zero-line crossings for trend confirmation
Trend Following Filter
Only take long trades when Z < 0 (undervalued)
Only take short trades when Z > 0 (overvalued)
Divergence Confirmation
Bearish: Price makes new highs while Z-score makes lower highs
Bullish: Price makes new lows while Z-score makes higher lows
ALERTS
Extreme Undervaluation — Z crosses below -2
Extreme Overvaluation — Z crosses above +2
Moderate Undervaluation — Z crosses below -1
Moderate Overvaluation — Z crosses above +1
Divergence Turned Positive — Crossed above zero
Divergence Turned Negative — Crossed below zero
COMBINED USAGE
For best results, use both indicators together :
Main Indicator — Visual context of actual vs. projected on price chart
Divergence Oscillator — Precise measurement for timing decisions
The main indicator shows where gold should be; the oscillator shows how extreme the mispricing is and when to act.
Disclaimer: This indicator is for educational purposes only. Past correlations do not guarantee future relationships. Market conditions can alter historical relationships. Always use proper risk management.
Gold Macro Projection ModelGOLD MACRO PROJECTION MODEL
Multi-Factor Fair Value Estimation for Gold
OVERVIEW
The Gold Macro Projection Model estimates gold's fair value based on its historical relationships with key macroeconomic drivers. By synthesizing data from silver , M2 money supply , the US Dollar Index , TIPS (real rates proxy) , and major equity indices , this indicator projects where gold should theoretically be trading—helping traders identify potential overvaluation and undervaluation conditions.
HOW IT WORKS
This indicator employs three complementary projection methodologies :
Correlation-Weighted Z-Score Composite (50% weight)
Calculates rolling correlations between gold and each input factor. Factors with stronger correlations receive more influence. Each factor is normalized to a z-score, combined into a composite, then converted back to gold's price scale.
Silver/Gold Ratio Mean Reversion (35% weight)
The silver/gold ratio historically exhibits mean-reverting behavior. This component projects gold's implied price based on current silver prices and the historical average ratio.
M2 Money Supply Relationship (15% weight)
Gold tracks monetary expansion over long time horizons. This anchors the projection to the fundamental relationship between gold and the monetary base.
INPUT FACTORS
Silver — Strong positive correlation; precious metals move together
M2 Money Supply — Positive correlation; gold as inflation hedge
US Dollar Index (DXY) — Typically negative correlation; inverse relationship
TIPS ETF — Real interest rate proxy; gold responds to real yields
Equity Indices — Variable correlation; risk-on/risk-off dynamics
VISUAL ELEMENTS
Yellow Line — Actual gold price
Aqua Line — Projected fair value
Green Fill — Gold trading below projection (potentially undervalued)
Red Fill — Gold trading above projection (potentially overvalued)
Aqua Bands — Standard deviation envelope around projection
INFO TABLE
The indicator displays a real-time information panel showing:
Current actual vs. projected price
Divergence percentage and Z-score
Rolling correlations for each factor
Dynamic weight allocation
Buy/Sell signal based on divergence extremes
SIGNAL INTERPRETATION
STRONG BUY — Z-score below -2 (extremely undervalued)
BUY — Z-score between -2 and -1 (moderately undervalued)
NEUTRAL — Z-score between -1 and +1 (fairly valued)
SELL — Z-score between +1 and +2 (moderately overvalued)
STRONG SELL — Z-score above +2 (extremely overvalued)
SETTINGS
Correlation Period — Lookback for correlation calculations (default: 60)
Regression Period — Lookback for mean/standard deviation (default: 120)
Smoothing Period — EMA smoothing for projection line (default: 10)
Auto Weights — Toggle between correlation-based or manual weights
Band Multiplier — Standard deviation multiplier for bands (default: 1.5)
ALERTS
Gold Extremely Undervalued — Z crosses below -2
Gold Extremely Overvalued — Z crosses above +2
Gold Crossed Above Projection
Gold Crossed Below Projection
BEST PRACTICES
Use on daily timeframe for most reliable signals
Combine with the companion Gold Divergence Oscillator for timing
Disclaimer: This indicator is for educational purposes only. Past correlations do not guarantee future relationships. Always use proper risk management.
Silver Projection DivergenceSILVER PROJECTION DIVERGENCE
Standardized Fair Value Divergence Oscillator
OVERVIEW
The Silver Projection Divergence oscillator is the companion indicator to the Silver Macro Projection Model. It quantifies the gap between silver's actual price and its projected fair value, displaying this divergence as a standardized z-score. This format makes it easier to identify extreme conditions and time entries/exits based on mean reversion.
HOW IT WORKS
The oscillator converts raw divergence (Actual Silver - Projected Silver) to a z-score by normalizing against its historical distribution:
Z-Score > 0 - Silver trading ABOVE projected value (overvalued)
Z-Score < 0 - Silver trading BELOW projected value (undervalued)
Z-Score > 2 - Extreme condition (2 standard deviations)
VISUAL ELEMENTS
Main Plot
Green line/histogram - Negative divergence (undervalued)
Red line/histogram - Positive divergence (overvalued)
Color intensity increases when divergence is expanding
Reference Lines
+2 sigma / -2 sigma (dashed) - Extreme zones
+1 sigma / -1 sigma (dotted) - Moderate deviation
Zero line - Fair value equilibrium
Signal Markers
Green Triangle (bottom) - Z-score crosses below -2 (STRONG BUY)
Red Triangle (top) - Z-score crosses above +2 (STRONG SELL)
Background
Light red background - Extreme overvaluation (Z > 2)
Light green background - Extreme undervaluation (Z < -2)
SIGNAL INTERPRETATION
Z > +2.0 - Extreme Overvaluation - STRONG SELL / Take profits
Z +1.0 to +2.0 - Moderate Overvaluation - Caution / Reduce exposure
Z -1.0 to +1.0 - Fair Value Range - Neutral / Hold
Z -2.0 to -1.0 - Moderate Undervaluation - Accumulate / Scale in
Z < -2.0 - Extreme Undervaluation - STRONG BUY signal
COMPONENT TABLE
The bottom-right table breaks down divergence by factor:
Gold Ratio - Deviation from gold-implied fair value
M2 Supply - Divergence from monetary-implied value
DXY Signal - Dollar strength bullish/bearish indication
Equities - Equity market positioning signal
OVERALL - Combined signal with Z-score
TRADING APPLICATIONS
Mean Reversion Strategy
Enter LONG when Z < -2 and begins rising
Enter SHORT when Z > +2 and begins falling
Use zero-line crossings for trend confirmation
Trend Following Filter
Only take long trades when Z < 0 (undervalued)
Only take short trades when Z > 0 (overvalued)
Divergence Confirmation
Bearish: Price makes new highs while Z-score makes lower highs
Bullish: Price makes new lows while Z-score makes higher lows
ALERTS
Extreme Undervaluation - Z crosses below -2
Extreme Overvaluation - Z crosses above +2
Divergence Turned Positive - Crossed above zero
Divergence Turned Negative - Crossed below zero
COMBINED USAGE
For best results, use both with Silver Macro Projection Model - indicator:
Main Indicator - Visual context of actual vs. projected on price chart
Divergence Oscillator - Precise measurement for timing decisions
The main indicator (Silver Macro Projection Model - ) shows where silver should be; this oscillator shows how extreme the mispricing is and when to act.
Disclaimer: This indicator is for educational purposes only. Past correlations do not guarantee future relationships. Market conditions can alter historical relationships. Always use proper risk management.
Silver Macro Projection ModelSILVER MACRO PROJECTION MODEL
Multi-Factor Fair Value Estimation for Silver
OVERVIEW
The Silver Macro Projection Model estimates silver's fair value based on its historical relationships with key macroeconomic drivers. By synthesizing data from gold, M2 money supply, the US Dollar Index, and major equity indices, this indicator projects where silver should theoretically be trading, helping traders identify potential overvaluation and undervaluation conditions.
HOW IT WORKS
This indicator employs three complementary projection methodologies:
Correlation-Weighted Z-Score Composite (50% weight) - Calculates rolling correlations between silver and each input factor. Factors with stronger correlations receive more influence. Each factor is normalized to a z-score, combined into a composite, then converted back to silver's price scale.
Gold/Silver Ratio Mean Reversion (35% weight) - The gold/silver ratio historically exhibits mean-reverting behavior. This component projects silver's implied price based on current gold prices and the historical average ratio.
M2 Money Supply Relationship (15% weight) - Silver tracks monetary expansion over long time horizons. This anchors the projection to the fundamental relationship between silver and the monetary base.
INPUT FACTORS
Gold - Strong Positive - Precious metals move together; silver amplifies gold
M2 Supply - Positive - Inflation hedge; expands with monetary base
DXY - Negative - Dollar strength pressures commodity prices
S&P 500 - Variable - Risk sentiment indicator
Dow Jones - Variable - Industrial/economic health proxy
Nasdaq 100 - Variable - Growth/risk appetite indicator
Russell 2000 - Variable - Small-cap risk sentiment
VISUAL ELEMENTS
Silver Line (Gray) - Actual silver price
Yellow Line - Model's projected fair value
Green Fill - Silver trading BELOW projection (potentially undervalued)
Red Fill - Silver trading ABOVE projection (potentially overvalued)
INFORMATION TABLE
The indicator displays a real-time panel showing:
Current correlation coefficients for each factor
Dynamic weight allocation based on correlation strength
Z-scores for each input factor
Actual vs. projected silver price
Percentage divergence from fair value
Signal classification (Strong Buy to Strong Sell)
SETTINGS
Lookback Settings
Correlation Period (default: 60) - Bars used for rolling correlations
Regression Period (default: 120) - Bars for z-score normalization
Smoothing Period (default: 10) - EMA smoothing on projection
Weight Settings
Use Auto Correlation Weights - Weights adjust dynamically based on correlation strength
Manual Weights - Override with custom factor weights
ALERTS
Silver Extremely Undervalued (Z < -2)
Silver Extremely Overvalued (Z > +2)
Price crossed above projection
Price crossed below projection
BEST PRACTICES
Use on daily timeframe for most reliable signals
Combine with the companion Divergence Oscillator for timing
Extreme divergences (>2 sigma) historically precede mean reversion
Consider macro environment as correlations shift during different regimes
Longer regression periods (150-250) for investing; shorter (60-90) for trading
Disclaimer: This indicator is for educational purposes only. Past correlations do not guarantee future relationships. Always use proper risk management.
ADIBABA - 4x EMAThis indicator is based on the Exponential Moving Average (EMA) and is designed to help traders identify trend direction, momentum, and price structure with clarity.
The script provides fully customizable EMA length along with an optional Smoothing EMA (SMS), allowing traders to fine-tune the indicator according to their trading style and market conditions.
It is suitable for intraday, swing, and positional traders and works well across multiple asset classes.
How It Works
• The primary EMA follows price movement and defines the trend
• The smoothing EMA reduces market noise and improves signal quality
• Price above EMA indicates a bullish bias
• Price below EMA indicates a bearish bias
This combination helps filter false signals and provides stronger trend confirmation.
Order Blocks+swl - Dual MTF Fixed ExtendedOrder Blocks+SWL - Dual MTF with Swing Validation
Overview
This advanced TradingView indicator combines Multi-Timeframe Order Block detection with Swing High/Low validation to identify high-probability supply and demand zones. The tool displays order blocks from higher timeframes and current timeframe, then highlights those that align with swing points for enhanced reliability.
🔧 Key Features
Multi-Timeframe Order Block Detection
- Current Timeframe: Detects order blocks on the chart's native timeframe
- HTF1 & HTF2: Two customizable higher timeframes (default: 60m, 240m)
- Independent Toggles: Enable/disable each timeframe's OBs separately
Smart Order Block Logic
- Long Order Blocks: Formed when current candle's LOW > middle candle's HIGH
- Short Order Blocks: Formed when current candle's HIGH < middle candle's LOW
- Persistent Display: Boxes extend until price fills the zone
- Color Coding:
- Current TF: Green (long) / Red (short)
- HTF1: Orange (long) / Maroon (short)
- HTF2: Blue (long) / Purple (short)
Swing Point Integration
-Swing Lows (SWL) & Swing Highs (SWH): Automatically detected using pivots
-Validation Overlay: Highlights order blocks that coincide with swing points
- Lime boxes: Long OBs with SWL confirmation
- Fuchsia boxes: Short OBs with SWH confirmation
Visual Elements
- Order Block Boxes: Semi-transparent zones with bold borders
- Entry Markers: Triangle shapes below/above bars for visual confirmation
- Swing Labels: SWL/SWH labels at pivot points
- Valid OB Overlay: Distinctive colored boxes for validated zones
⚙️ Input Parameters
Display Controls
- `Show Long OBs`: Toggle long order block display
- `Show Short OBs`: Toggle short order block display
- `Show Current TF OBs`: Display order blocks from current timeframe
- `Use HTF1/HTF2 OBs`: Enable higher timeframe order blocks
- `HTF1/HTF2`: Customizable timeframe strings
Technical Settings
- `My Input`: Maximum unfilled boxes to display (50-50000, default: 1000)
- `Swing Lookback / Forward Length`: Pivot detection sensitivity (default: 10)
📊 How It Works
1. Order Block Detection: The indicator scans three timeframes for specific candlestick patterns that indicate potential supply/demand zones.
2. Swing Point Detection: Simultaneously identifies swing highs and lows using pivot logic.
3. Validation Overlay: When an order block forms on the same candle as a swing point, it creates a special highlighted zone indicating higher probability.
4. Memory Management: Automatically manages box count to prevent performance issues while maintaining historical context.
🎯 Trading Applications
- Trend Continuation: Validated order blocks in trend direction offer high-probability entries
- Reversal Zones: Swing-aligned order blocks at key levels suggest potential reversals
- Multi-Timeframe Analysis: Higher timeframe OBs provide stronger support/resistance
- Zone Trading: Trade bounces from or breaks through validated zones
💡 Usage Tips
1. Prioritize Validated Zones: Focus on lime/fuchsia boxes as they have swing confirmation
2. Timeframe Hierarchy: HTF2 (240m) > HTF1 (60m) > Current TF for zone strength
3. Combine with Price Action: Use zones alongside candlestick patterns and volume
4. Risk Management: Place stops beyond opposite side of order block
⚠️ Limitations
- Not a standalone trading system - combine with other analysis
- May repaint on current bar until close
- Higher timeframes require sufficient historical data
- Swing detection sensitivity depends on length parameter
---
Note: This tool is for educational purposes. Always practice proper risk management and backtest strategies before live trading.
Asian and London Session High-Low (Auto UK DST) + PDH/PDLThis indicator automatically plots Asian session (7:00am–2:00pm MYT) and London session high/low using Malaysian time, with London adjusting automatically for UK Daylight Saving Time (4:00pm–9:00pm MYT in winter, 3:00pm–8:00pm MYT during DST).
It also shows Previous Day High/Low (PDH/PDL) and a 7:00am MYT daily reset line, while No-Trade zones are available but turned OFF by default and can be enabled when needed.
HaP RSIComprehensive Guide to HaP RSI Indicator
Introduction
The HaP RSI indicator is a custom technical analysis tool designed to replicate the logic and structure of the HaP MACD indicator but applied to the Relative Strength Index (RSI). This indicator combines traditional RSI concepts with advanced smoothing techniques, dynamic signal generation, and visual cues to help traders identify potential entry and exit points, trend strength, and momentum shifts.
This document provides an exhaustive explanation of the indicator's logic, its components, and practical strategies for trading with it.
Logic and Structure of HaP RSI
The HaP RSI indicator is built on the foundation of the RSI oscillator, which measures the speed and change of price movements to identify overbought and oversold conditions. The indicator enhances RSI by incorporating the following elements:
RSI Calculation: Uses a customizable length (default 10) and allows selection of smoothing type (EMA or SMA) for flexibility.
Signal Line: A moving average of the RSI (default length 9) that acts as a reference for crossovers and trend confirmation.
DEMA Logic: Double Exponential Moving Average applied to RSI and its signal line to generate dynamic dot signals for entries and exits.
Visual Elements: Midline at 50, Overbought/Oversold levels at 70 and 30, color-coded dots (Blue, Green, Orange, Red) for intuitive interpretation.
Conditions and Signal Generation
The indicator uses a sophisticated set of conditions to determine market states and generate actionable signals:
Buy Condition: Triggered when the DEMA of RSI is above the DEMA of its signal line AND the DEMA signal line is rising. This indicates strengthening bullish momentum.
First Signal Dot: Appears as a Blue dot when the buy condition becomes true for the first time after being false. This marks the start of a potential bullish phase.
Ongoing Signal Dot: Appears as Green if RSI is rising or Orange if RSI is falling while the buy condition remains true. This provides real-time feedback on momentum strength.
Exit Dot: Appears as Red when the buy condition turns false after being true, signaling a potential end to the bullish phase.
Crossovers: RSI crossing above its signal line (bullish) or below (bearish) are calculated but hidden by default, offering additional confirmation if enabled.
Trading Strategies Using HaP RSI
The HaP RSI indicator can be used in multiple ways to enhance trading decisions. Below are detailed strategies and best practices:
1. Entry Strategies
Enter long positions when a Blue dot appears, confirming the start of bullish momentum. Ideally, combine this with RSI above the midline (50) and price action breaking resistance.
Add to positions or scale in when Green dots appear, indicating continued bullish strength.
2. Exit Strategies
Exit or tighten stops when a Red dot appears, signaling weakening momentum.
Consider partial exits on Orange dots if momentum slows but the trend remains intact.
3. Trend Confirmation
Use the midline (50) as a regime filter: RSI above 50 generally favors long trades, while below 50 favors shorts.
Overbought/Oversold levels (70/30) can help identify exhaustion points for reversals or caution zones.
4. Risk Management
Always combine HaP RSI signals with stop-loss placement based on recent swing lows/highs.
Avoid chasing signals in low-volatility environments; confirm with volume or higher timeframe trend.
Advanced Usage and Best Practices
Combine HaP RSI with other indicators like moving averages or price action patterns for confluence.
Use alerts for Blue and Red dots to automate monitoring and reduce missed opportunities.
Backtest the indicator on multiple timeframes (H1 recommended) to optimize settings for your trading style.
Summary
HaP RSI is a powerful tool that blends RSI's simplicity with advanced signal logic, making it suitable for trend-following, momentum trading, and swing strategies. Its visual clarity and dynamic alerts allow traders to act decisively while managing risk effectively.
TradeCraftly - Previous OHLC Levels📌 TradeCraftly – Previous OHLC Levels
TradeCraftly OHLC plots the most important higher-timeframe price levels directly on your chart, helping you identify key support, resistance, and reference zones with clarity.
🔹 What this indicator shows
Previous Day OHLC (High, Low, Open, Close)
Previous Week OHLC
Previous Month OHLC
Today’s Open (no historical clutter)
All levels are drawn as clean horizontal rays and extend only into the current session, keeping the chart focused and readable.
🔹 Key Features
Individual enable / disable controls for Day, Week, and Month levels
No historical clutter – only the most relevant levels are shown
Labels aligned to today’s first candle for quick level identification
Custom line width, color, and style (solid / dashed / dotted)
Works seamlessly on all intraday and higher timeframes
🔹 Why use Previous OHLC levels?
Previous period OHLC levels are widely used by:
Intraday traders
Swing traders
Index & futures traders
They often act as:
Strong support & resistance
Liquidity zones
Breakout / rejection levels
🔹 Best Use Cases
Market open bias using Today’s Open
Intraday trades around PDH / PDL
Weekly range reactions near PWH / PWL
Higher-timeframe context using Monthly levels
⚠️ Disclaimer
This indicator is for educational purposes only and does not provide trading signals or financial advice. Always manage risk and confirm with your own analysis.
Fair Value Gaps w Signals fair value gaps for resistance and support. It is important to understand ranges with this. An open bearish fair value gaps can indicate a bearish range. A bullish fair value gaps in premium can indicate retracement into the bearish range. A fair value gaps on a high time frame in discount of the range can be a indicator to go long. one can play the fair value gaps in discount or a range back into it for longs. negation of the fair value gaps candle bearish or bullish is stop loss. One would want to see a small time frame turn around story within the fair value gaps you are trading. FVG are support and resistance until the market is balanced. A bearish fair value gaps untouched can indicate the end of a range. The candle before the 1st bullsih fair value gaps could be the beginning of the range. all time frames
VWAP Institutional Trading Engine INDICATORVWAP Institutional Trading Engine
Adaptive Market Regime & Trading Model Indicator
🔍 Overview
The VWAP Institutional Trading Engine is an advanced, rule-based market analysis indicator designed to replicate institutional decision-making logic using VWAP, volatility, and session-based market behavior.
This indicator does not predict price.
Instead, it answers a more important question:
“What type of trading is appropriate right now – if any?”
The engine continuously evaluates:
Market regime (trend, range, dead market)
Volatility conditions
VWAP acceptance and deviation
Trading session (Asia / London / New York)
Based on this, it dynamically activates one of three trading models:
TREND
MEAN REVERSION
OFF (no trading)
This makes it ideal for:
Discretionary traders
Systematic traders
Risk-focused trading
Educational / portfolio-style trading approaches
🧠 Core Philosophy
Professional trading is not about finding more signals.
It is about knowing when not to trade.
This indicator is built around three institutional principles:
VWAP defines fair value
Volatility defines opportunity or danger
Different sessions require different behavior
⚙️ Indicator Components
1️⃣ VWAP & Statistical Deviation Bands
VWAP represents institutional fair price
±1σ bands indicate acceptance zones
±2σ bands represent statistical extremes
Used for:
Mean reversion zones
Trend acceptance confirmation
Go Score calculation
2️⃣ Volatility Engine
Volatility is measured using ATR relative to price
Compared against its own moving average
Classifications:
Low volatility → dead / untradable market
Normal volatility → structured behavior
High volatility → trend or liquidation events
3️⃣ Market Regime Detection
The engine classifies each moment into one regime:
Regime Meaning
TREND Price accepts above or below VWAP with volatility
RANGE Price rotates near VWAP
DEAD Low volatility, no opportunity
MIXED Unclear structure
4️⃣ Active Trading Model (Most Important)
Displayed in the dashboard as Model:
Model Interpretation
TREND Trade with momentum and continuation
MEAN_REVERT Trade extremes back to VWAP
OFF Do not trade
The Model tells you HOW you are allowed to trade right now.
5️⃣ Session Awareness (UTC)
The indicator adapts behavior based on session logic:
Session Preferred Behavior
Asia Mean Reversion
London Trend
New York Selective / adaptive
Trades are only allowed when model + session are aligned.
6️⃣ Go Score – Trade Quality Filter
Each potential setup receives a Go Score (0–100), based on:
Distance from VWAP
Market regime quality
Volatility penalties
Go Score Interpretation
≥ 80 High-quality (A+)
65–79 Acceptable
< 65 No trade
7️⃣ Risk Guidance (Informational)
The indicator outputs a Risk % suggestion, based on:
Go Score
Simulated drawdown logic
⚠️ This is guidance only, not position sizing.
📈 Visual Signals
The indicator plots contextual signals, not blind entries:
Mean Reversion Signals
▲ Long below −2σ
▼ Short above +2σ
Trend Signals
↑ Long after acceptance above +1σ
↓ Short after acceptance below −1σ
Signals appear only when trading is allowed by:
Model
Session
Go Score
🧩 Dashboard Explanation
The top-right dashboard displays real-time engine state:
Field Description
Session Current UTC session
Regime Detected market condition
Go Score Trade quality score
Risk % Suggested relative risk
Drawdown % Virtual defensive metric
Model Active trading model
If Model = OFF → do nothing.
🧭 Practical Trading Manual (Step-by-Step)
Step 1 – Check the Model
TREND → look for continuation
MEAN_REVERT → look for extremes
OFF → do not trade
Step 2 – Confirm Session Alignment
Asia + Mean Reversion ✔
London + Trend ✔
Misalignment = caution
Step 3 – Check Go Score
Below 65 → skip
65+ → proceed
Step 4 – Use Chart Structure
VWAP = anchor
σ bands = context
Signal = permission, not obligation
Step 5 – Manage Risk Manually
Use your own SL/TP rules
Follow the Risk % as guidance, not law
❌ What This Indicator Is NOT
Not a signal spam tool
Not a prediction system
Not a “holy grail”
It is a decision framework.
✅ Best Use Cases
Futures
Indices
Forex
Crypto
Intraday & swing trading
Recommended timeframes:
5m – 1H (intraday)
4H (contextual swing)
🏁 Final Notes
This indicator is intentionally transparent and rule-based.
It is designed to help traders:
Think in regimes
Trade with structure
Avoid overtrading
Protect capital
If you trade with the Model, not against it,
you will already be ahead of most market participants.
Supertrend BUY Only - Optimized for Gold M15 TimeframeOverview
The Supertrend BUY Only - Production Optimized is a high-performance trend-following indicator specifically tuned for XAUUSD (Gold) on the 15-minute timeframe. Unlike standard Supertrend scripts, this version focuses exclusively on bullish cycles to align with long-term upward bias and uses parameters discovered through deep data analysis of over 20,000 bars of historical market data.
Key Features
Data-Optimized Parameters: Defaults are set to ATR Period 7 and Multiplier 2.1, which backtesting has shown to provide a superior balance between sensitivity and noise reduction for Gold.
Production-Ready Alerts: Includes built-in alertcondition triggers for both BUY (Trend Flip) and STOP BUY (Trend Exit), complete with dynamic messages that include price and interval.
Trailing Support Band: Uses a trailing logic that locks in support levels during upward moves, preventing the band from dropping until the trend officially reverses.
Clean Visuals: Focuses on chart clarity by only plotting the support line during active uptrends and utilizing clean shape labels for entries and exits.
How to Use
Entry (BUY): When the Supertrend line flips from Red to Green and a "BUY" label appears. This indicates bullish momentum has overcome recent volatility.
Exit (STOP BUY): When the price closes below the Green support line. The indicator will plot a red "X" and clear the green background.
Setting Alerts: * Click the Alerts icon in TradingView.
Select this indicator under "Condition."
Choose "BUY Signal" for entries and "STOP BUY / EXIT" for managing your trade or taking profit.
Technical Details
The script allows users to toggle between the TradingView (RMA) ATR calculation and the Standard (SMA) method. For production and live trading, the RMA method is recommended as it provides a smoother response to volatility spikes common in the Gold market.
NY Opening Range [LuckyAlgo]
This custom ORM (Opening Range Move) indicator is designed as a tool for traders who focus not just on where a range is, but on the magnitude of the expansion following the initial morning volatility.
Here is a summary of the indicator and how it differentiates itself from standard Opening Range Breakout (ORB) tools.
Indicator Summary
The script captures the high and low of the market during the first 30 minutes of the NY session (09:30–10:00 AM EST). Once this range is set, it tracks the "Expansion Move" - the point distance from the range's boundary to the current session's high or low. It visualizes this through color-coded zones, dynamic labels at the session extremes, and a statistical table that benchmarks today's volatility against the recent past.
What specific questions does this indicator answer?
While most indicators tell you "the range is broken," this indicator answers quantitative questions vital for trade management:
1. "How far has the market stretched relative to the breakout?"
The indicator provides the exact point distance (+/-) from the range high/low. This helps you determine if the move is just beginning or if it has already extended significantly.
2. "Is the current move 'normal' or an outlier?"
By using the Stats Table, you can see if the current 40-point move on NQ is typical or if the average move over the last 10 days is actually 80 points. This prevents you from "fading" a move that still has average room to grow, or taking a "pro-trend" trade when the market is already exhausted.
3. "Where is the session extreme located?"
The inclusion of the dashed High of Day (HOD) and Low of Day (LOD) lines with attached labels tells you exactly where the "Move" calculation is peaking. If the HOD line hasn't moved for two hours, you know the bullish expansion has stalled.
4. "When is the data no longer relevant?"
Because of the 17:00 EST reset logic, the indicator answers the "end of day" question for futures traders. It stops measuring at the settlement/close of the electronic session, ensuring your charts are clean for the overnight (Globex) session or ready for the next morning.
Technical Advantage
Most scripts use a single "point in time" to reset. This script uses a Trading Window logic, which is much more robust. If a bar is missing at exactly 17:00 due to low volume or a data glitch, the indicator won't "break" or keep drawing old lines - it understands the entire window of time it is allowed to exist in.
Credit to @LuxAlgo for his initial Opening Range Breakout indicator used as a base to develop this version.
Volatility Regimes | GainzAlgo📊 OVERVIEW:
=========
This is a comprehensive ATR-based trading system designed for professional
traders who need advanced volatility analysis, precise trade management, and
intelligent market regime detection. The indicator combines multiple proven
volatility concepts into one powerful, customizable tool.
⭐ WHY THIS SYSTEM IS UNIQUE AND WORTHY OF PUBLICATION:
====================================================
This is not simply a collection of ATR-based indicators placed together.
It represents a unified volatility analysis framework where each component
is specifically designed to work in concert with the others, creating a
complete trading workflow that cannot be replicated by using multiple
separate indicators.
🔗 SYNERGISTIC INTEGRATION - How Components Work Together:
🧠 1. CONTEXT-AWARE ANALYSIS
The Volatility Regime Detection acts as the "brain" of the system,
classifying market conditions into 4 distinct phases. Every other
component then adapts its behavior based on this regime classification:
- ATR Bands expand/contract with regime changes
- Stop Loss distances automatically adjust (tighter in compression,
wider in high volatility)
- Take Profit targets scale proportionally to current regime
- Signal sensitivity filters itself based on market phase
📐 2. UNIFIED VOLATILITY FOUNDATION
All calculations share a single ATR baseline calculation, ensuring
internal consistency across the entire system. When ATR changes, every
element updates in perfect synchronization:
- Bands recalculate from the same ATR value
- Risk management levels use the same volatility measurement
- Regime classification and signals reference identical data
🛡️ 3. INTEGRATED RISK MANAGEMENT
The system doesn't just show WHERE to enter - it calculates HOW MUCH
to risk:
- Dynamic Stop Loss adapts to current ATR automatically
- Position Size Calculator uses the dynamic stop to compute exact quantities
- Take Profit levels scale proportionally, maintaining optimal risk:reward
✅ 4. TWO-STAGE SIGNAL CONFIRMATION
The alert system creates a logical progression:
Step 1: Volatility Breakout → Market energy is building
Step 2: Trend Confirmation → Direction confirmed with volatility support
This prevents false breakouts by requiring both volatility AND direction.
🏦 5. PROFESSIONAL WORKFLOW INTEGRATION
The system mirrors how institutional traders analyze markets:
Phase 1: Assess regime → What's the market doing?
Phase 2: Identify setup → Where's the opportunity?
Phase 3: Calculate risk → What's my exposure?
Phase 4: Set targets → Where do I take profit?
Phase 5: Monitor regime → When do conditions change?
❌ WHY NOT USE SEPARATE INDICATORS?
- Separate ATR Bands: Don't know about regime changes, remain static
- Separate Regime Indicator: Doesn't automatically adjust stop/targets
- Separate Position Calculator: Doesn't know your actual ATR-based stop
- Manual Integration: Requires constant mental calculation and cross-referencing
🧮 DETAILED CALCULATION METHODOLOGY:
=================================
📏 ATR (AVERAGE TRUE RANGE) CALCULATION:
- True Range = Maximum of:
1. Current High - Current Low
2. Absolute value of (Current High - Previous Close)
3. Absolute value of (Current Low - Previous Close)
- ATR = Simple Moving Average of True Range over specified period (default: 14)
📊 DYNAMIC ATR BANDS:
- Upper Band = Current Close + (ATR × Band Multiplier)
- Lower Band = Current Close - (ATR × Band Multiplier)
- Band 1: 1.0× ATR (closest support/resistance)
- Band 2: 2.0× ATR (intermediate zone)
- Band 3: 3.0× ATR (extended zone)
🌡️ VOLATILITY REGIME CLASSIFICATION:
Step 1: Calculate ATR Baseline
- Baseline ATR = SMA or EMA of ATR over long period (default: 50 bars)
- This represents "normal" volatility for the instrument
Step 2: Calculate ATR Ratio
- ATR Ratio = Current ATR ÷ Baseline ATR
- Example: If current ATR = 70 and baseline = 50, ratio = 1.40
Step 3: Classify Regime Based on Ratio
- COMPRESSION: Ratio < 0.70 (ATR is 30% below normal)
Market consolidating, volatility contracting, energy building
- EXPANSION: Ratio between 1.15 and 1.40 (ATR is 15-40% above normal)
Volatility breaking out, early phase of directional movement
- HIGH VOLATILITY: Ratio > 1.40 (ATR is 40%+ above normal)
Strong sustained trend with high participation
- EXHAUSTION: ATR declining after high volatility period
Requires: Previous high ratio + declining ATR over X bars (default: 5)
Trend maturity, potential reversal or consolidation approaching
🛑 DYNAMIC STOP LOSS CALCULATION:
- For Long Positions: Stop Loss = Entry Price - (ATR × SL Multiplier)
- For Short Positions: Stop Loss = Entry Price + (ATR × SL Multiplier)
- Default Multiplier: 2.0× ATR
- Adjusts automatically: Wider in high volatility, tighter in compression
🎯 TAKE PROFIT LEVELS:
- TP1 = Entry Price ± (ATR × TP1 Multiplier)
- TP2 = Entry Price ± (ATR × TP2 Multiplier)
- TP3 = Entry Price ± (ATR × TP3 Multiplier)
- Direction (+ or -) depends on trade direction
📦 POSITION SIZE CALCULATION:
Formula: Position Size = Account Risk Amount ÷ Stop Loss Distance
Step-by-step:
1. Risk Amount = Account Size × (Risk Percentage ÷ 100)
2. Stop Distance = |Entry Price - Stop Loss Price|
3. Position Size = Risk Amount ÷ Stop Distance
📈 ATR PERCENTILE RANKING:
- >80% = Extremely high volatility
- 20-80% = Normal volatility range
- <20% = Extremely low volatility
🌀 VOLATILITY CONTRACTION PATTERN:
Detects extended low-volatility periods indicating imminent breakout.
🧭 TREND DETECTION SIGNALS:
Bullish: Price > MA AND Current ATR > ATR MA
Bearish: Price < MA AND Current ATR > ATR MA
⚡ VOLATILITY BREAKOUT SIGNALS:
Triggered when ATR exceeds its moving average by a defined threshold.
🧩 CORE FEATURES:
==============
1. ATR BANDS (Dynamic Support/Resistance)
2. VOLATILITY REGIME DETECTION
3. DYNAMIC STOP LOSS SYSTEM
4. MULTIPLE TAKE PROFIT LEVELS
5. SUPPORT & RESISTANCE LEVELS
6. RISK MANAGEMENT CALCULATOR
7. ATR PERCENTILE RANKING
8. VOLATILITY CONTRACTION PATTERN
9. TREND DETECTION SIGNALS
10. VOLATILITY BREAKOUT SIGNALS
⚙️ RECOMMENDED SETTINGS BY TRADING STYLE:
======================================
DAY TRADING • SWING TRADING • POSITION TRADING • SCALPING
📘 HOW TO USE THIS INDICATOR:
==========================
STEP 1: Identify Market Regime
STEP 2: Wait for Entry Signal
STEP 3: Set Stop Loss
STEP 4: Set Take Profits
STEP 5: Position Sizing
STEP 6: Monitor & Manage
🔔 ALERT SYSTEM:
=============
Alerts for volatility breakouts, trend changes, regime transitions,
ATR band crossings, contraction completion, and percentile extremes.
🎨 CUSTOMIZATION:
==============
All visuals, thresholds, multipliers, colors, alerts, and risk parameters
can be fully customized.
⚠️ IMPORTANT DISCLAIMER:
=====================
This indicator is a volatility analysis tool and does NOT provide financial advice.
Past performance does not guarantee future results.
All trading involves substantial risk.
All trading decisions are the sole responsibility of the user.
Easy Risk Calculator with FeesThis Pine Script creates a position sizing calculator for TradingView that helps traders understand the true cost and risk of a trade when accounting for exchange fees. Here's what it does:
Core Purpose
The script calculates the actual position size, costs, and risk for a trade based on a minimum position value in USDT, while factoring in trading fees that affect both entry and exit prices.
Key Calculations
Position Size Determination:
Takes a desired position value in USDT and adjusts for fees
For longs: divides by entry price × (1 + fee) since you pay fees when buying
For shorts: divides by entry price × (1 - fee) since you receive less when shorting
Risk Analysis:
Calculates the reverse risk - determining how much you'd actually lose based on your position size, rather than starting with a target risk amount
Computes effective entry/exit values - the true USDT value after accounting for fees on both sides of the trade
Expected loss shows the actual dollar amount you'd lose if your stop loss is hit
Risk deviation reveals the percentage difference between your expected loss and calculated risk amount
Visual Output
The script displays a table on the chart showing:
Trade direction (LONG/SHORT with color coding)
Entry price and stop loss levels
Fee percentage used
Position size in both USDT and units of the asset
Effective entry and exit values (after fees)
Expected loss if stopped out
Deviation from target risk
Calculated risk amount in USDT
This tool is particularly useful for traders who need to work with minimum position sizes on exchanges and want to understand exactly how fees impact their actual risk exposure.Claude is AI and can make mistakes. Please double-check responses. Sonnet 4.5Claude is AI and can make mistakes. Please double-check responses.
Nifty OI Support Resistance This study is designed for educational purposes to assist traders in analyzing price structure on the Nifty 50 index. It creates visual reference zones based on standard mathematical intervals used in the derivatives market.
Purpose of the Tool: In the Nifty 50 index, price action is often analyzed relative to "Round Numbers" or standard strike intervals (e.g., multiples of 50). This script automatically plots these mathematical reference levels relative to the current price to help users observe price behavior.
How It Works: This indicator uses a mathematical formula to identify the nearest standard strike price intervals based on the current close price.
Strike Logic: It projects levels at standard 50-point intervals (Nifty's standard strike distance).
Volatility Buffers: It adds a user-defined buffer (default: 30 points) around these levels to visualize a "zone" rather than a specific price point.
Major Levels: It visually distinguishes major round numbers (multiples of 500) which are often significant for technical analysis.
Features:
Automated Plotting: Adjusts dynamically as price moves to show relevant upper and lower reference bands.
Zone Visualization: Helps in identifying potential areas of support or resistance based on technical structure.
Customizable: Users can adjust the strike distance and buffer range to suit different volatility conditions.
Usage: This tool is intended to be used as a visual aid for Technical Analysis. It allows users to see where the price is located relative to standard Nifty intervals.
⚠️ STANDARD DISCLAIMER & DISCLOSURE:
Nature of Content: This script and description are for educational and informational purposes only.
No Financial Advice: This tool does not constitute investment advice, buy/sell recommendations, or trading tips.
Not SEBI Registered: The author is not a SEBI registered Research Analyst (RA) or Investment Advisor (IA).
Methodology: The levels displayed are generated purely via mathematical calculation based on price inputs and do not represent real-time exchange Open Interest data.
Risk Warning: Trading in securities market is subject to market risks. Read all the related documents carefully before investing. User discretion is advised.
Planetary IngressDisplays planetary ingresses, the moments when a planet crosses from one zodiac sign into another. This indicator marks historical ingresses directly on your chart and projects upcoming ones with precise date, time, and retrograde status.
Powered by the open-source BlueprintResearch Planetary Ephemeris library , which implements truncated VSOP87 (planets) and ELP2000 (Moon) series for high-accuracy celestial calculations entirely within Pine Script.
█ FEATURES
• All 10 celestial bodies — Sun, Moon, Mercury, Venus, Mars, Jupiter, Saturn, Uranus, Neptune, and Pluto
• Geocentric or Heliocentric views — toggle between Earth-centered (standard astrology) and Sun-centered perspectives
• Retrograde indicator — shows ℞ symbol when a planet is in apparent retrograde motion (geocentric only)
• Future ingress projection — displays the following sign change as a dotted vertical line with customizable date/time and timezone
• Color-coded by zodiac sign — 12 fully customizable colors for each sign
• Per-sign visibility controls — easily show/hide specific signs
• Per-sign alerts — get notified when a planet enters selected signs
• Fully customizable labels — adjust size, colors, transparency, and placement
█ HOW TO USE
1. Select your planet from the dropdown
2. Choose Geocentric (traditional) or Heliocentric view
3. Historical ingresses appear as labels above price bars with a planet symbol and a zodiac sign
4. The next future ingress is shown as a dotted vertical line with projected date/time
5. Hover over labels for exact degree position (e.g., "0°Ari00'")
6. Set up alerts via "Alert on Ingress" settings for specific sign entries
█ LIMITATIONS & ACCURACY
This indicator uses optimized, truncated VSOP87 and ELP2000 series tailored for Pine Script performance. It delivers excellent accuracy for trading and analytical purposes, but is not intended for professional astronomical use.
Expected Ingress Timing Accuracy (Geocentric view):
• Sun, Moon, Mercury, Venus, Mars: Within hours to ±1 day
• Jupiter, Saturn: Within ±1–2 days
• Uranus, Neptune: Within ±3–7 days
• Pluto: Within ±1–2 weeks (simplified Meeus method, valid 1900–2100)
Heliocentric view: Inner and faster-moving planets match geocentric accuracy. Outer planets (especially Uranus/Neptune) may occasionally show larger variances (up to ±1 month in rare cases) due to their extremely slow motion amplifying minor truncation effects in the series.
Why outer planets vary more:
Slower planets take weeks or months to cross a single degree. Even minor positional discrepancies from truncated terms can shift ingress timing by days or weeks—most noticeable with the outermost bodies.
Recommendation: For mission-critical timing, always cross-reference with professional tools such as JPL Horizons , Swiss Ephemeris, or Astro.com.
█ ROADMAP
Accuracy improvements are an ongoing priority. The modular library design allows targeted upgrades to individual planets without breaking existing functionality.
Planned Enhancements:
• Higher-precision outer planet calculations (Uranus, Neptune)
• Improved heliocentric outer planet accuracy
• Enhanced Pluto method
• Additional series terms where beneficial
Updates will be released through the BlueprintResearch/lib_ephemeris library—follow for notifications.
█ OPEN SOURCE
This indicator is part of the fully open-source Planetary Ephemeris project. The core ephemeris library is public for study, modification, and reuse in your own scripts:
• BlueprintResearch/lib_ephemeris — Main planetary calculation engine
Licensed under MPL 2.0 — free to use and modify, with changes to the library shared back to the community.
Real Drawdown Balance (Apex Style)Beat the Psychological Game of prop firms by tracking your actual balance/drawdown.
