Empiece

Volumen

VWAP + EMA Analysis [Joshlo]Overview and Use Case VWAP Analysis gives the possibility to combine multiple time frames of VWAP along with a triplet of exponential moving averages. This can provide insight into potential scalp, swing and longer term trades, depending on your time frame. The use of this indicator with it's setup is based off the the Scalp Setup Alerts provided by Roensch Capital. The primary use for this script is to help with intraday scalp set ups. Using the Daily VWAP, turned on by default, we can look for price to respect and bounce from one of the VWAP lines (support or resistance) back toward equilibrium, we can also look for price to bounce off of equilibrium and move back toward VWAP support or resistance. The chart attached shows AMD bouncing off of the Daily time frame VWAP Resistance level multiple times (see yellow boxes), often with confirmation given by an increase in volume which is often far higher than the average volume. In many of these cases a short position could've been opened or put option could have been placed with a profitable outcome. Every line projected onto the chart via this indicator has the potential to create support or resistance as well as causing 'hang ups', meaning price loses it's momentum, slows down and hangs out in the particular area. This is shown on the chart within the green box. Chart walkthrough - See attached chart After a rejection off of the Daily VWAP Resistance line (depicted by the white circle), price starts to move back toward Daily VWAP Equilibrium. In order to reach this line, price needs to move through the 20EMA (white) and 50EMA (purple), the Weekly VWAP Resistance (red circles) and the 200EMA (orange). All of these lines are a part of this single indicator. The 20EMA seems to offer little resistance but follows the price on it's move, offering some resistance to a volatile move upward. Initially upon contact with the 50EMA, price hangs up and bounces above and below the line whilst finding support on the Weekly VWAP Resistance at the same time. This causes a 'hang up' or sideways movement for around 20 minutes of trading. A potential trade may have entered at the white circle with a VWAP Resistance rejection and exited upon contact with the 50EMA in anticipation of multiple EMAs and support / resistance lines converging which is known to cause price movement to slow. Eventually with an increase in volume, price breaks below the 20EMA (white), 50EMA (purple) and the Weekly VWAP Resistance level (red circles). Price then finds support on the 200EMA (orange), although there was potential for the price to fall to the Daily VWAP Equilibrium (solid blue). As the Red VWAP lines tend to act more often as resistance as opposed to support (price is rarely above these lines for extended periods), the trade from earlier may have profited more by awaiting contact with the 200EMA before exiting, taking the assumption that the Weekly VWAP Resistance was more likely to act as resistance than support. A period of consolidation in the green box, around the Weekly VWAP Resistance, 20EMA, 50EMA and with support from the 200EMA eventually resulted in another break out where the price came back up to the Daily VWAP Resistance. Prior to the end of this trading day, there were two more opportunities for scalp setups based off of the price showing consistent rejections off the Daily VWAP Resistance back down to the 50EMA. In the final example, price breaks above the Daily VWAP Resistance but quickly rejects off of the Monthly VWAP Resistance. For examples where the VWAP Resistance or Support or broken, it can help to look at an indicator such as the RSI to look for bullish divergence or bearish divergence. Just as this example shows bounces and rejection off of VWAP Resistance, the same applies around the Equilibrium and Support VWAP lines. The perfect scenario would be to find a ticker where there has already been two or three bounces off of one of these levels, with the goal of taking the trade on the next bounce and either using a percentage price target or technical price target based off of the EMAs or VWAP lines. If there are EMAs close in the direction you want to take the trade, there is a higher chance of hang ups and reversals, so a clear run is the more desired trade set up. You can also look for these indicator lines to stack up in order to form a stronger support and resistance. For example the 200EMA and Daily VWAP Equilibrium being close to each other may suggest it would take more of an effort to break both of these levels, but one by itself may break more easily. Indicator Setup In the settings for the indicator, almost everything you might want to change can be done from the Input tab. The three options for VWAP (daily, weekly and monthly) allow for analysis on multiple time frames. Daily is turned on as standard. Standard Deviation Multiplier is set to 2 as standard, this effects the distance of the VWAP support and resistance from the equilibrium line. This seems to be a level that works well with finding support and resistance lines, however if there is excessively high or low volume, occasionally the lines can be thrown off. You can adjust this level if required to find a 'sweet spot' where price likes to reject or find support. The colors for all VWAPs can be adjusted via the Inputs tab, however if you'd like to change the type of line these are depicted as, this can be done from the Styles tab. The 3 EMAs (20, 50 and 200) can be toggled on or off and also have their color changed. The style of the lines can be adjusted from with the Styles tab if required.
Indicador de Pine Script™
por Joshlo
.srb suite pin-upThe essential suite Indicator that are well integrated to ensure visibility of essential items for trading. it is very cumbersome to put symbol in the Tradingview chart and combine essential individual indicators one by one. Moreover even with such a combination, the chart is messy and visibility is not good. This is because each indicator is not designed with the others in mind. This suite was developed as a composite-solution to that situation, and will make you happy. --> This is steamlined pin-up version of .srb suite. --> A minimal set of indicators for comparing different symbols. --> This is well-balanced alternative next version of previous .b pin-up symbol BTC-agg. Volume 4 BTC-spot & 4 BTC-PERP volume aggregated. It might helps you don't miss out on important volume flows. Weighted to spot trading volume when using PERP+spot volume . If enabled, BTC-agg.Vol automatically applied when selecting BTC-pair. --> This is used in calculations involving volumes, such as VWAP . Moving Average 1 x JMA trend ribbon ; Accurately follow short-term trend changes. 2 x EMA ribbon ; zone , not the line. MA extension line ; It provide high visibility to recognize the direction of the MA. SPECIAL TOOLS BB regular (Dev. 2.0, 2.5) BB Extented (Dev. 2.5, 3.0, 3.5) SPECIAL TOOLS - Ultra Volume Marking x2 x4 greater than regular average volume, it will help you can take the reversal It does not directly indicate volume, but ultra-volume marking is enough for compare. --------------------------------------------------------------------------------------------------------------------------------------- if you have any questions freely contact to me by message on tradingview but please understand that responses may be quite late. Special thanks to all of contributors of community. The script may be freely distributed under the MIT license.
Indicador de Pine Script™
por sr_b
14
.srb suiteThe essential suite Indicator. that are well integrated to ensure visibility of essential items for trading. it is very cumbersome to put symbol in the Tradingview chart and combine essential individual indicators one by one. Moreover even with such a combination, the chart is messy and visibility is not good. This is because each indicator is not designed with the others in mind. This suite was developed as a composite-solution to that situation, and will make you happy. designed to work in the same pane with open-source indicator by default. Recommended visual order ; Back = .srb suite, Front = .srb suite vol & info individually turn on/off only what you need on the screen. BTC-agg. Volume 4 BTC-spot & 4 BTC-PERP volume aggregated. It might helps you don't miss out on important volume flows. Weighted to spot trading volume when using PERP+spot volume . If enabled, BTC-agg.Vol automatically applied when selecting BTC-pair. --> This is used in calculations involving volumes, such as VWAP. Moving Average 1 x JMA trend ribbon ; Accurately follow short-term trend changes. 3 x EMA ribbon ; zone , not the line. MA extension line ; It provide high visibility to recognize the direction of the MA. SPECIAL TOOLS VWAP with Standard Deviation Bands VWAP ruler BB regular (Dev. 2.0, 2.5) BB Extented (Dev. 2.5, 3.0, 3.5) Fixed Range Volume Profile ; steamlined one, performace tuned & update. SPECIAL TOOLS - Auto Fibonacci Retracement - New GUI 'built-in auto FBR ' has been re-born It shows - retracement Max top/ min bottom ; for higher visibility It shows - current retracement position ; for higher visibility The display of the Fib position that exceeds the regular range is auto-determined according to the price. tradingview | chart setting > Appearance > Top margin 0%, Bottom margin 0% for optimized screen usage tradingview | chart setting > Appearance > Right margin 57 .srb suite vol & info --> Visual Order > Bring to Front .srb suite vol & info --> Pin to scale > No scale (Full-screen) Visual order ; Back = .srb suite, Front = .srb suite vol & info 1. Fib.Retracement core is from tradingview built-in FBR ---> upgrade new-type GUI, and performance tuned. 2. Fixed-range volume-profile core is from the open-source one ---> some update & perf.tuned. --------------------------------------------------------------------------------------------------------------------------------------- if you have any questions freely contact to me by message on tradingview. but please understand that responses may be quite late. Special thanks to all of contributors of community. The script may be freely distributed under the MIT license.
Indicador de Pine Script™
por sr_b
19
.srb suite vol & infoThe volume indicator what can replace the built-in volume indicator and It also has some useful features. and designed to work as overlay in the same pane with open-source indicator by default. Regular volume Indicator Volume SMA plot Large Volume ! emphasize by color & mark. Ultra Volume ! overlay marking ; x2 x4 x6 lager than regular average volume. it will help you can take the reversal BTC-agg. Volume 4 BTC-spot & 4 BTC-PERP volume aggregated. It might helps you don't miss out on important volume flows. Weighted to spot trading volume when using PERP+spot volume. If enabled, BTC-agg.Vol automatically applied when selecting BTC-pair. Information panel (optimized for crypto-currency) BTC-PERP price & delta (when Binance:BTCUSDT selected) BTC dominance, Binance:BTCUSDTPERP OI Symbol, Price, Daily up/down ATR14 (for checking current volatility) Recommended setup for .srb suite tradingview | chart setting > Appearance > Top margin 0%, Bottom margin 0% for optimized screen usage tradingview | chart setting > Appearance > Right margin 57 .srb suite vol & info --> Visual Order > Bring to Front .srb suite vol & info --> Pin to scale > No scale (Full-screen)
Indicador de Pine Script™
por sr_b
10
Volume [Educational]Hello All, This is an educational work and it's developed to show how to write scripts that will work like built-in volume indicator. We have new features in Pine Script™ Language, such chart.bg_color, chart.fg_color, chart.left_visible_bar_time, chart.right_visible_bar_time and many more. Many Thanks to Tradingview and Pine Team for such great additions! You can find more information about these new functions here . How the script works? - At the first step it calculates how many visible bar on the chart by using chart.right_visible_bar_time and chart.left_visible_bar_time functions. - Calculates the zero line for the volume - Finds maximum volume on visible area and normalize all volume values - Draws volume bars - Shows volume info as indicator value. in this step it uses chart.fg_color and plotarrow() commands to show the values in optimum color. In order to place the indicator at the bottom of the chart, Please set Bottom Margin = 0 as shown in the following screenshot: You can change the volume bar colors optionally. An Example screenshot with different volume bar colors: Enjoy!
Indicador de Pine Script™
por LonesomeTheBlue
28
[MAD] CMF 5x MTF BTCthis is a revised classic CMF indicator, with some additional features Features: 4 different Exchanges:Tickers (clouds). your current exchanges:ticker (white) an averaged cmf over all 5 tickers (black) a selectable time frame for all tickers 3 buy and 3 sell lines (visual H-lines only) autocentering over ghosts color scheme is for a dark theme, change in settings if needed. how to use: act the crossins when one or two cmfs move steeply into an h-line, when moving back to the middle they have their signal and do their own risk management. sometimes really crazy things happen in small time frames (whalegames) that you can use as a tradestop and sit it out. generally try to go with a bigger trend that give less but better results
Indicador de Pine Script™
por djmad
3
VWAP With EMAFor those who want the classic Volume Weighted Average Price and Ema on the same overlay. This script utilizes the same protocols as the VWAP and EMA you currently use. Just frees up an indicator space. KEEP UP TO DATE Are you a college student or graduate? Join College Town Trade discord for helpful community specializing in trading stocks, options, and crypto. Our staff consists of a group of college students with 10+ years of combined experience. Collectively we have profited and made well above an average yearly salary while being in college. The community aspect is everything and the team always listens and appreciates feedback. We all earn and learn together. There are free trials in place in order for you to see what it’s all about. These are in place so we can gain your trust and show transparency! I look forward to seeing you in the community advBtBjDhk
Indicador de Pine Script™
por sraomberts
1
VWAP With EMA Overlay (Adjustable Anchor)For those who want the classic Volume Weighted Average Price and Ema on the same overlay. This script utilizes the same protocols as the VWAP and EMA you currently use. Just frees up an indicator space. KEEP UP TO DATE Are you a college student or graduate? Join College Town Trade discord for helpful community specializing in trading stocks, options, and crypto. Our staff consists of a group of college students with 10+ years of combined experience. Collectively we have profited and made well above an average yearly salary while being in college. The community aspect is everything and the team always listens and appreciates feedback. We all earn and learn together. There are free trials in place in order for you to see what it’s all about. These are in place so we can gain your trust and show transparency! I look forward to seeing you in the community advBtBjDhk
Indicador de Pine Script™
por sraomberts
Volume Trend Meter LTFA new take to an already popular indicator of mine, now with lower time frame support for a volume called Volume Trend Meter LTF (VTML). The VTM LTF indicator measures the volume pressure at a specific part of the candle (Start, Middle, or the end of the candle) and displays it as a histogram. This indicator sums up all green candle volumes and red candle volumes over the selected part of the candle (Select in settings - start end or middle) and plots their values by subtracting increasing volume and decreasing volume. Use this indicator to identify increasing volume with the green candles (close bigger than open) and increasing volume of the red candles (close is smaller than open). Can also work on daily charts and higher. ======= Calculation ========== For Green Column: The total Volume of green candles is higher than the total red candle volume. For Red Column: The total Volume of red candles is higher than the total green candle volume. ======= Volume Trend Meter LTF Colors ======= Green: Increasing buying pressure. Red: Increasing selling pressure. My original VTM (not the lower time frame version): Like if you like and Follow me for upcoming indicators/strategies: www.tradingview.com
Indicador de Pine Script™
por dman103
18
Volume Spread for VSA CustomHey everyone, I have been using volume a lot more lately as price action can sometimes get manipulated but volume shows us the truth! Anyways, I have enjoyed the Volume Spread for VSA indicator but wished I had the code to change a few settings. This volume indicator includes spread analysis with the ability to customize input values and I'm making it open source so you can do with it as you please. I have made notes all throughout the code to give suggestions on a few changes or why I have written it in such a way. I have also tried to section everything off to make it easier to see where each piece of the code is used. Overall I think it is a good example of how to code cleanly and how to add useful notes when you are learning Pine for yourself :D The indicator on the price chart is my Donchian Channel indicator, which you can also find on my profile. This is the one I use every day.
Indicador de Pine Script™
por theehoganator
10
Chart VWAP█   OVERVIEW This indicator displays a ​Volume-Weighted Average Price anchored to the leftmost visible bar of the chart. It dynamically recalculates when the chart's visible bars change because you scroll or zoom your chart. If you are not already familiar with ​VWAP, our Help Center will get you started. The typical ​VWAP is designed to be used on intraday charts, as it resets at the beginning of the day. Our Rolling ​VWAP , instead, resets on a rolling time window. You may also find the VWAP Auto Anchored built-in indicator worth a try. █   HOW TO USE IT Load the indicator on an active chart (see the Help Center if you don't know how). By default, it displays the chart's ​VWAP in orange and a simple average of the chart's visible close values in gray. This average can be used as a companion to the ​VWAP, since both are calculated from the same set of bars. The script's settings allow you to hide it. You may also use the script's settings to enable the display of the chart's OHLC (open, high, low, close) levels and the values of the high and low. These are also calculated from the range of visible bars. You can complement the high and low lines with their price and their distance in percent from the chart's latest visible close . You can use the levels to quickly identify the distances from extreme points in the visible price range, as well as observe the visible chart's beginning and end prices. █   NOTES FOR Pine Script™ CODERS This script showcases three novelties:  • Dynamic recalculation on visible bars  • The VisibleChart library by PineCoders  • The new `anchor` parameter of ta.vwap() Dynamic recalculation on visible bars This script behaves in a novel way made possible by the recent introduction of two new built-in variables: chart.left_visible_bar_time and chart.right_visible_bar_time , which return the opening time of the leftmost and rightmost visible bars on the chart. These are only two of many new built-ins in the `chart.*` namespace. See this blog post for more information, or look up them up by typing "chart." in the Pine Script™ Reference Manual . Any script using chart.left_visible_bar_time or chart.right_visible_bar_time acquires a unique property, which triggers its recalculation when traders scroll or zoom their chart, causing the range of visible bars to change. This new capability is what makes it possible for this script to calculate its ​VWAP on the chart's visible bars only, and dynamically recalculate if the user scrolls or zooms their chart. This script is just a start to the party; endless uses for indicators that redraw on changes to the chart will no doubt emerge through the hands of our community's Pine Script™ programmers. The VisibleChart library by PineCoders The newly published VisibleChart library is designed to help programmers benefit from the new capabilities made possible by the fact that Pine Script™ code can now tell when it is executing on visible bars. The library's description, functions and example code will help programmers make the most of the new feature. This script uses three of the library's functions:  • `PCvc.vVwap()` calculates a ​VWAP for visible bars. ​​​​ • `PCvc.​avg()` calculates the average of a source value for visible bars only. We use it to calculate the average close (the default source).  • `PCvc.chartXTimePct(25)` calculates a time value corresponding to 25% of the horizontal distance between visible bars, starting from the left. The new `anchor` parameter of ta.vwap() Our script also uses this new `anchor` parameter to reset the ​VWAP at the leftmost visible bar. See how simple the code is for the VisibleChart library's `vVwap()` function. Look first. Then leap.
Selecciones de los editores
Indicador de Pine Script™
por TradingView
17
Intraday predictive High Volume Activity sessions [BEA]Idea: This indicator is designed to know the high traded volume sessions in advance before the day starts. The predictive volume bars will be plotted in advance once a new trading session starts. Logic Used: The basic idea is to store each bar volume / Volume MA data for the selected time. So, the first bar of each data is stored for all selected historical days. Once the data is stored, I am taking average of each bar data for the selected Historical days. How to Use: This gives me an idea of the volume behavior throughout the days based on historical data. So I decide my time of trading for that specific times sessions where the traded volume activity is high. The bars which are more than the Moving average ( Highlighted Volume bars plotted in future ) is the time session to focus. Designed only for intraday timeframes. Here in the image, you can see the session in advance for high traded volume activity. Try it test it , let me know if it can be improved further. Have a happy trading. DISCLAIMER Any and all liability for risks resulting from investment transactions or other asset dispositions carried out by the user based on information received or a market analysis is expressly excluded by me. All the information made available here is generally provided to serve as an example only, without obligation and without specific recommendations for action. It does not constitute and cannot replace investment advice. We therefore recommend that you contact your personal financial advisor before carrying out specific transactions and investments. Do your own research, this is not a financial advice.
Indicador de Pine Script™
por TJalam
16
VWAP and previous VWAP for Support & Resistance for D W MI overhauled my old multi timeframe VWAP script to make the VWAP OC-Check work for all timeframes. Now only one function is used to calculate the 3 preset VWAPs. Previous VWAPS = the price where the last session closed sometimes work as Support and Resistance. The OC-Check Mode theory examines if the VWAP from the Open is above or below the VWAP from Close and if price is above or below normal VWAP (HLC3). This way we have 4 states: Red = Strong Downtrend Orange = Weak Downtrend Blue = Weak Uptrend Green = Strong Uptrend As always it is just a theory - nothing is set in stone regarding any indicator.
Indicador de Pine Script™
por MartinWeb
6