Ultra-Compact MTF EMAsimple indicator which shows you the trend on other timeframes. fully customizable
Análisis de tendencia
EMA 50 / EMA 200 Crossoversimple indicator to use with the others. this one gives a signal when ema 50 crosses 200. you can set an alert and snipe the best entry!
MTF EMA Cross Labels perfect indicator to make trading on your phone easier. all info on 1 screen.
ema's are adjustable
[CT] Highest/Lowest Close Midline Candle ColorThis indicator looks back a user defined number of bars, the default is 14, and finds the highest closing price and the lowest closing price in that lookback window. Those two values form a rolling closing range. The script then calculates a midpoint of that range by averaging the highest close and the lowest close. That midpoint is plotted as “o”, and it acts like a simple, adaptive balance line for where the market is trading within its recent closing range.
On every bar, the candle color is driven by where the current close finishes relative to that midpoint. When price closes above the midpoint, the script colors the candle green, which tells you that the close is occurring in the upper half of the most recent closing range. When price closes below the midpoint, the candle is colored red, which tells you the close is occurring in the lower half of the most recent closing range. If the close lands exactly on the midpoint, the script leaves the bar uncolored, which is a quick way to spot “neutral” closes that are sitting right at the balance point.
On the chart you will see three plots. The “hi” line is the highest close over the lookback period, so it behaves like a dynamic ceiling for closes. The “lo” line is the lowest close over the lookback period, so it behaves like a dynamic floor for closes. The “o” line is the midpoint between those two, and it will move up when the rolling highest and lowest closes lift, and it will move down when they fall. Because all three are based on closing prices instead of highs and lows, they reflect where the market is actually accepting value at the end of each bar rather than momentary wicks.
In practical use, the midpoint line is your decision line and the candle colors are your bias filter. A sequence of green candles means closes are consistently happening above the midpoint, which implies bullish control of the recent closing range and can be used as a confirmation to favor long setups, trend continuation trades, or pullbacks that hold above the midpoint. A sequence of red candles means closes are consistently happening below the midpoint, which implies bearish control of the recent closing range and can be used to favor short setups or bearish continuation until price can reclaim the midpoint. When candles flip color around the midpoint repeatedly, that is a visual cue that the market is rotating and the midpoint is acting like a balance area rather than support or resistance, which often aligns with consolidation or choppier conditions.
The “hi” and “lo” lines can be treated as context levels. If price is closing above the midpoint and pressing toward the “hi” line, you are seeing strength within the closing range and the prior highest close becomes the next level where continuation may stall or break. If price is closing below the midpoint and pressing toward the “lo” line, you are seeing weakness within the closing range and the prior lowest close becomes the next level where continuation may pause or accelerate through. Breaks beyond the “hi” or “lo” line indicate that the rolling closing range is expanding, which can coincide with trend continuation or a breakout from a prior range.
This tool is simple by design and is best used as a directional filter and a structure guide rather than a standalone entry system. It does not repaint past bars because it only uses completed historical closes within the selected lookback window, and it updates normally as each new bar closes. You can increase the period to smooth it for higher time frames or more stable trends, and decrease it to make it more sensitive for faster markets or scalping, with the tradeoff that shorter periods will flip colors more often in chop.
Demand Index - Metastock VersionThis script implements the Demand Index, a complex technical indicator originally developed by James Sibbet. This specific version is adapted from the classic MetaStock formula to ensure accuracy and consistency with the original methodology.
The Demand Index combines price and volume data to relate price pressure to volume intensity. It is often used as a leading indicator to predict price trends by assessing the balance between buying pressure (Demand) and selling pressure (Supply).
How It Works
The calculation involves several steps to normalize volume and price changes:
Weighted Close: It calculates a weighted close price giving extra weight to the closing price (High + Low + 2*Close) / 4.
Volatility & Volume Averages: It computes the Average True Range (ATR) proxy and an Exponential Moving Average (EMA) of the volume to establish a baseline.
Buying & Selling Pressure: The core logic compares the current weighted close to the previous one.
If prices rise, the volume is assigned to Buying Pressure.
If prices fall, the volume is assigned to Selling Pressure.
A decay factor (Constant) is applied based on volatility to smooth the reaction to extreme price moves.
The Index: The final oscillator is derived from the ratio of smoothed Buying Pressure to Selling Pressure.
How to Use It
The Demand Index oscillates around a zero line. Traders typically look for the following signals:
Divergence: This is the most common use.
Bullish Divergence: Prices are making new lows, but the Demand Index is making higher lows. This suggests selling pressure is waning and a reversal may be imminent.
Bearish Divergence: Prices are making new highs, but the Demand Index is making lower highs. This suggests buying pressure is drying up.
Zero Line Crossovers:
A cross above zero indicates that Buying Pressure has overtaken Selling Pressure (Bullish).
A cross below zero indicates that Selling Pressure has overtaken Buying Pressure (Bearish).
Trend Confirmation: In a strong trend, the Demand Index should generally move in the same direction as the price.
Settings
Length: The lookback period for the moving averages (Default is 19, consistent with the standard MetaStock setting).
Originality & Credits
This script is a direct translation of the mathematical formula used in MetaStock software. While the Demand Index concept belongs to James Sibbet, this specific Pine Script implementation is provided as open source for the community to study and utilize.
Disclaimer:
This script is for educational and informational purposes only. It DOES NOT constitute financial advice. Trading involves significant risk, and past performance is not indicative of future results. Always do your own research before making investment decisions.
Premarket High/Low (Today + Yesterday)Plots Premarket High and Low (04:00–09:30 ET) for the current day and previous day.
Designed for intraday traders who use premarket structure as key levels.
Overlay MACD + EMA 12/26A price-overlay indicator that plots EMA 12 and EMA 26 on the chart and displays a normalized MACD and signal line slightly offset from price to visualize momentum directly on the main chart without using a separate pane.
Enterprise Adaptive RSI WeightDescription (TradingView)
Enterprise Adaptive RSI Weight is a clean, decision-support oscillator for XAUUSD & EURUSD (5m/15m).
It converts RSI into a normalized Weight (W) and smooths it with a Hull Moving Average (yellow) to highlight trend bias + momentum shifts.
What to watch
W (main line) = bias & momentum (above 0 = bullish, below 0 = bearish)
Yellow line (HMA) = signal filter
CROSS (W ↔ HMA) = key confirmation point
CROSS ↑ = bullish momentum confirmation
CROSS ↓ = bearish momentum confirmation
Built-in safety filters (enterprise-style)
Signals are filtered by:
Quality/Gate (model confidence)
Dead Zone (avoids weak/noise signals)
Optional HTF alignment (trade only when higher timeframe agrees)
Visual markers
L / S = entry triggers (valid cross + filters)
XL / XS = momentum exit warnings
0↑ / 0↓ = bias flip (crossing the 0 line)
REV = exit from extreme zones (OB/OS reversal hint)
STR = strong trend condition
How to use (simple workflow)
Check STATE in the panel: trade only BULL or BEAR
Enter on CROSS in the same direction
Manage/exit on XL/XS or loss of momentum
Tip: Best used as a confirmation tool, not as a standalone strategy.
[codapro] Projection Bands Description
Projection Bands is a visual forecasting tool designed to help traders anticipate potential breakouts and breakdowns before they occur.
Unlike traditional lagging overlays, this indicator uses forward slope estimation, pressure-adjusted volatility, and band expansion models to project likely price zones over time.
Whether you're momentum trading or watching for reversion signals, this system provides a powerful forward-looking edge.
Key Features
Forward Slope Logic using price regression and return-based momentum
Pressure Modeling Input (0–100) to simulate contrarian or trending environments
Volatility-Based Band Expansion using both return sigma and ATR
Live Re-Anchoring every 30 minutes for fresh projection pivots
Customizable Band Width Scaling (Square Root of Time vs Linear)
Optional Band Trail for historical projection reference
Buy/Sell Signals with directional logic, not reversals
Buy/Sell Signals
Sell: Price closes below the lower projection band
Buy: Price closes above the upper projection band
Signals trigger only on confirmed candle closes beyond the outer boundaries.
Default Settings (Optimized)
Setting Value
Projection Horizon 180 minutes
Bars Ahead (Forecast Span) 20 bars
Re-Anchor Interval 30 minutes
Projection Mode Momentum
Contrarian Weight 0.5
Momentum Weight 0.5
Band Width Scaling Linear
Return Volatility Multiplier 0.25
ATR Volatility Multiplier 1.0
Pressure Influence Multiplier 0.5
ATR Multiplier (Step Size) 1.0
Return Multiplier (Step Size) 1.0
Dummy Pressure 50
How It Works
This system blends multiple components into a forward projection engine:
Forward Slope Logic
The projected band centerline is based on:
A weighted regression of return-based momentum, and
A contrarian pressure adjustment using ATR or log-return volatility.
This hybrid model allows the bands to lean into or away from trend direction, unlike standard overlays that lag behind price.
Pressure Modeling
The Pressure input (0–100) modifies the projection behavior:
Low pressure (0–30): favors trend continuation
High pressure (70–100): favors contrarian pullback logic
Mid-range (around 50): balanced projection
Pressure affects both the forecast slope and volatility expansion.
Volatility Width Scaling
Band width expands over time using a combination of:
Return volatility (standard deviation of log returns)
ATR volatility for smoother baseline context
The band expansion can follow either:
Square Root of Time (for options-style risk scaling), or
Linear Growth (more aggressive for trending environments)
As volatility rises , the projected bands widen, reflecting an expanding range of possible future price movement.
How to Use It
Use for breakout anticipation or volatility modeling.
Watch for price closes outside the band boundaries as a signal for potential movement continuation.
Adjust pressure to simulate market regime: trend vs mean-reversion.
Customize bars ahead and re-anchor interval to match your timeframe.
Use alongside structure or volume tools for greater confluence.
Disclaimer
This tool was created using the CodaPro Pine Script indicator design engine — an architecture system for building visual signal overlays and automated alerts.
It is provided for educational and informational purposes only and does not constitute financial advice. Always test thoroughly before applying to live market conditions.
EMA Trend Reversal (Regime Change)
EMA Trend Reversal (Regime Change)
This indicator highlights EMA slope reversals that often coincide with trend or regime shifts, using a simple two-stage visual system.
It is especially effective on higher timeframes (Daily / Weekly) for swing trading and trend-bias awareness.
Detailed User Guide
What the signals mean
Unconfirmed signals (triangles)
Yellow triangle below price
- EMA is turning up intrabar (not yet confirmed)
Yellow triangle above price
- EMA is turning down intrabar (not yet confirmed)
Unconfirmed signals may repeat at a set interval until confirmation.
Confirmed signals (dots)
Green dot below price
- EMA slope has confirmed upward (bullish regime shift)
Red dot above price
- EMA slope has confirmed downward (bearish regime shift)
Confirmed dots only appear after the candle closes.
Alerts
This script provides two alerts only:
EMA Reversal UP
EMA Reversal DOWN
Each alert can fire on:
Initial unconfirmed reversal
Reminder interval while unconfirmed
Final confirmed reversal
Alerts will NOT fire unless this indicator is active on at least one chart.
It may be kept on a chart you do not actively trade.
Settings
EMA Length (default: 21)
Reminder interval (minutes)
Show / hide unconfirmed triangles
Show / hide confirmed dots
Dot transparency
Colors (locked to preserve signal meaning)
Best use cases
Identifying trend or regime changes
Weekly swing trade entries and exits
Holding-period guidance during trends
Alert-based monitoring without watching charts
This is not a scalp or oscillator signal.
It works best when combined with structure, support/resistance, or higher-timeframe context.
Disclaimer
This indicator is provided for educational and informational purposes only.
It does not constitute financial, investment, or trading advice.
All trading involves risk. Use at your own discretion.
CVD Normalizzato (0-100)# 📑 MASTER OPERATING MANUAL: Institutional Order Flow Ecosystem (v2.0)
**Integrated Suite:** PVSRA Dashboard PRO + SR High Volume Boxes + Massive Order Spike Detector + CVD-100
---
## 1. SYSTEM HIERARCHY
This trading ecosystem is designed to decode "Smart Money" footprints. It filters retail noise to identify where institutional participants are placing massive orders.
1. **Bias (Dashboard):** Determines the overall market direction (Sentiment).
2. **Context (SR Boxes):** Identifies the price "Battlefields" (Supply & Demand).
3. **Internal Force (CVD-100):** Reveals aggressive buying/selling pressure (Market Delta).
4. **Trigger (PVSRA & Spikes):** Signals the exact moment of execution.
---
## 2. COMPONENT DICTIONARY
### A. CVD-100 (The Internal Engine)
*Reveals the aggressive pressure of buyers/sellers.*
- **Values > 80:** Aggressive buyers are dominant (Extreme Overbought).
- **Values < 20:** Aggressive sellers are dominant (Extreme Oversold).
- **Green Slope:** Aggressive buyers are increasing pressure.
- **Red Slope:** Aggressive sellers are increasing pressure.
### B. PVSRA Candles (Market Climax)
- 🟢 **Bright Green:** Bull Climax (Highest institutional activity).
- 🟣 **Magenta:** Bear Climax (Panic selling or Institutional offloading).
- 🔵 **Blue/Red:** Rising volume (Professional participation).
### C. SR Boxes & Spikes (The Execution Zones)
- **Teal/Red Boxes:** Areas where significant volume was stored.
- **Triangles (▲/▼):** "Massive Order Spike". Confirms statistical anomaly.
- **Diamonds (◆):** Confirms a level (Box) is successfully holding the price.
---
## 3. INTEGRATED STRATEGIES
### **Strategy A: Institutional Trend Follower**
- **Bias:** Dashboard shows "STRONG BUY" + Price is above SMA 200.
- **Setup:** Price breaks above a **Red Box** (Resistance).
- **Confirmation:** **CVD-100** is sloping up (Green) and a **Massive Buy Spike** (▲) appears.
- **Entry:** On the close of the breakout candle.
### **Strategy B: The Climax Reversal (The Sniper)**
- **Bias:** Price reaches a **Teal Box** (Support) after an extended drop.
- **Setup:** **CVD-100** is below 20 (Deep Oversold/Exhaustion).
- **Trigger:** A **Magenta Climax Candle** (PVSRA) appears, followed immediately by a **Green Diamond (◆)**.
- **Entry:** Long when price breaks the high of the Climax candle.
---
## 4. THE ULTIMATE CONFLUENCE CHECKLIST
| Priority | Confirmation | Indicator Tool |
| :--- | :--- | :--- |
| **1. Bias** | Is the Dashboard "STRONG" in the trade direction? | PVSRA Dashboard |
| **2. Level** | Is the price at/inside a Teal or Red Box? | SR Boxes |
| **3. Volume** | Is the candle Climax or Rising color? | PVSRA Candles |
| **4. Delta** | Is CVD-100 aligned with your direction? | CVD-100 |
| **5. Trigger**| Has a Triangle (Spike) or Diamond (Hold) appeared? | Spike Detector |
---
## 5. TECHNICAL CONFIGURATION
| Setting | Value | Goal |
| :--- | :--- | :--- |
| **PVSRA Climax Factor** | 2.7 | Filter for institutional impact only. |
| **Spike Multiplier** | 4.0 | Isolate statistical extreme volume. |
| **CVD Normalization** | 50 (Stoch) | Standardize delta for clear overbought/sold. |
| **SMA Bias** | 200 | Institutional trend filter. |
---
## 6. PRO TIPS & RISK NOTES
- ⚠️ **Divergence:** If Price makes a new high but **CVD-100** makes a lower high, the trend is exhausted. Prepare for a reversal.
- ⚠️ **News Filter:** High-impact news causes "Spikes" but invalidates "Boxes". Wait 15 mins for the market to stabilize.
- ⚠️ **Absorption:** A Climax candle with a tiny body inside a Box is "Absorption". Institutions are soaking up orders. Wait for the box breakout.
---
*Created for: Professional Trading Operations*
Support and Resistance (High Volume Boxes) [ChartPrime]# 📑 OPERATING MANUAL: Institutional Volume & SR Protocol (v1.0)
## 1. SCOPE AND CORE LOGIC
This trading suite is designed to track **Institutional Order Flow**. By combining statistical volume anomalies (Spikes) with price zones of high participation (Boxes), the system identifies where "Smart Money" is entering the market and which price levels they are likely to defend.
---
## 2. COMPONENT OVERVIEW
### **A. Massive Order Spike Detector**
Identifies momentum and exhaustion through volume standard deviation ($σ$).
* **Green/Red Triangles:** Indicate a volume event exceeding **4x** the historical average.
* **Key Use:** Acts as a **trigger** for entry.
### **B. SR High Volume Boxes**
Maps the areas where high-volume pivots occurred.
* **Teal Boxes:** High-volume Support (Buying zones).
* **Red Boxes:** High-volume Resistance (Selling zones).
* **Diamonds (◆):** Real-time confirmation that a level is "Holding."
* **Dashed Boxes:** Indicate a level has been broken and may now "flip" polarity (Support becomes Resistance).
---
## 3. SIGNAL INTERPRETATION TABLE
| Signal Type | Visual | Market Context | Action |
| :--- | :--- | :--- | :--- |
| **Buy Spike** | 🟢 Triangle | Breakout or Trend Continuation | Confirm with Support Box |
| **Sell Spike** | 🔴 Triangle | Breakdown or Trend Exhaustion | Confirm with Resistance Box |
| **Support Hold**| 🟢 Diamond | Price successfully bounced off a Teal zone | Look for Long entry |
| **Resist. Hold**| 🟠 Diamond | Price successfully rejected from a Red zone | Look for Short entry |
| **SR Break** | 🏷️ Label | A major volume zone has been breached | Wait for Retest of dashed box |
---
## 4. OPERATIONAL WORKFLOW (THE STRATEGY)
### **Step 1: Zone Identification**
Observe the **SR High Volume Boxes** to see where the "battlefields" are.
* *Neutral:* Price is between boxes.
* *Action:* Price enters a Teal (Support) or Red (Resistance) box.
### **Step 2: The Trigger (The Spike)**
Wait for the **Massive Order Spike** to appear as the price interacts with a box:
* **The Aggressive Break:** A Spike occurs *as the price breaks through* a box. This validates a strong momentum trade.
* **The Rejection:** A Spike occurs *at the edge of a box* followed by a Diamond (◆). This validates a high-probability reversal.
### **Step 3: Confirmation (The Retest)**
If a box is broken (e.g., "Break Res"), wait for the price to return to the **Dashed Box**. If a "Hold" signal (Diamond) appears on the retest, the setup is high-conviction.
---
## 5. TECHNICAL CONFIGURATION
| Parameter | Recommended Value | Purpose |
| :--- | :--- | :--- |
| **Spike Multiplier** | 4.0 - 5.0 | Filters out noise; captures only major moves. |
| **Lookback Period** | 20 | Balances between minor and major SR levels. |
| **Box Width** | 1.0 - 1.5 | Adjust based on ATR (Volatility) of the asset. |
| **Alert Type** | Once Per Bar Close | Ensures signals are confirmed by the candle close. |
---
## 6. RISK MANAGEMENT & BEST PRACTICES
1. **News Filter:** Avoid trading 5 minutes before/after high-impact news (CPI, FOMC). Spikes are guaranteed but direction is unpredictable.
EMA Trend Reversal (Regime Change)EMA Trend Reversal (Regime Change)
This indicator highlights EMA slope reversals that often coincide with trend or regime shifts, using a simple two-stage visual system.
It is especially effective on higher timeframes (Daily / Weekly) for swing trading and trend-bias awareness.
Detailed User Guide
What the signals mean
Confirmed signals (dots)
Green dot below price
- EMA slope has confirmed upward (bullish regime shift)
Red dot above price
- EMA slope has confirmed downward (bearish regime shift)
Confirmed dots only appear after the candle closes.
Unconfirmed signals (triangles)
Yellow triangle below price
- EMA is turning up intrabar (not yet confirmed)
Yellow triangle above price
- EMA is turning down intrabar (not yet confirmed)
Unconfirmed signals may repeat at a set interval until confirmation.
Alerts
This script provides two alerts:
EMA Reversal UP
EMA Reversal DOWN
Each alert can fire on:
Initial unconfirmed reversal
Reminder interval while unconfirmed
Final confirmed reversal
Alerts will NOT fire unless this indicator is active on at least one chart.
It may be kept on a chart you do not actively trade.
Settings
EMA Length (default: 21)
Reminder interval (minutes)
Show / hide unconfirmed triangles
Show / hide confirmed dots
Dot transparency
Colors (locked to preserve signal meaning)
Best use cases
Identifying trend or regime changes
Weekly swing trade entries and exits
Holding-period guidance during trends
Alert-based monitoring without watching charts
This is not a scalp or oscillator signal.
It works best when combined with structure, support/resistance, or higher-timeframe context.
Disclaimer
This indicator is provided for educational and informational purposes only.
It does not constitute financial, investment, or trading advice.
All trading involves risk. Use at your own discretion.
Multi Asset + Multi Timeframe DashboardMulti Asset + Multi Timeframe Dashboard
Overview
This indicator is a multi-asset, multi-timeframe trend dashboard designed to provide a fast, structured overview of market direction across several instruments and timeframes at once.
It combines five major assets with four configurable higher timeframes, evaluating each using a fixed set of 10 widely used technical indicators. The results are aggregated into a clear overall trend arrow, allowing traders to quickly assess alignment or divergence without chart clutter.
What This Indicator Does
For each symbol and timeframe, the script evaluates the following technical components:
EMA trend structure (20 / 50 / 200)
MACD line direction
MACD histogram polarity
RSI relative to its moving average
RSI above/below 50
Stochastic K vs D
Commodity Channel Index (CCI)
Awesome Oscillator (AO)
Each component contributes a bullish (+1), bearish (−1), or neutral (0) score.
All scores are aggregated into a single overall trend direction, displayed as:
▲ Uptrend
▼ Downtrend
✖ Neutral / Mixed
This process is repeated across four independent timeframes, giving a compact, multi-timeframe trend overview per asset.
Key Features
Multi-Asset Dashboard
Monitor multiple markets simultaneously from a single table.
Multi-Timeframe Analysis
Four independently selectable timeframes per symbol.
Indicator Aggregation Logic
Combines multiple classic indicators into a single directional signal.
Non-Intrusive Display
Table-based output keeps the chart clean and readable.
Who This Indicator Is For
This tool is designed for traders who want:
A high-level trend overview across assets
Multi-timeframe confirmation
Clear directional signals without stacking many indicators
Immediate notification of meaningful trend changes
It is not a standalone trading system, but a decision-support and market-context tool.
Usage Notes
The table display is optimized for 1-minute to 5-minute charts due to TradingView table rendering limits.
The indicator is intended for analysis and alerting, not automated execution.
All logic is transparent and based on well-known technical indicators.
Disclaimer
This indicator is provided for educational and informational purposes only.
It does not constitute financial advice. Always combine it with proper risk management and independent analysis.
VDUB Bands - MTF WMA+ATR Volatility Lanes (6 Alerts)VDUB Bands draws volatility-scaled “trend lanes” around a Weighted Moving Average (WMA) using ATR (or a WMA of True Range). It can display up to four tiers (L1–L4), with higher tiers sourced from higher timeframes to show local structure → higher-timeframe structure on a single chart.
────────────────────────────────────────
1. What it does (plain English)
────────────────────────────────────────
Think of each tier as a lane system around the trend:
• Inner rails = “normal volatility lane” around the WMA
• Outer rails = “extension / extreme zone” for that tier
• Higher tiers (L3/L4) show bigger structure
• Lower tiers (L1/L2) show active lane behavior
Typical interpretation:
• Price inside inner rails → normal variance around the trend lane
• Between inner and outer → stretched, but not extreme
• Outside outer rails → extended vs that tier’s volatility band
────────────────────────────────────────
2) Why it’s useful (and why it’s not a mashup)
────────────────────────────────────────
This is not a bundle of unrelated indicators. Everything serves one cohesive purpose:
• Visualize trend + volatility lanes across multiple time horizons
• Keep rails consistent and readable (levels, fills, outlines)
• Optional multi-timeframe aggregation for structure context
• A compact 6-alert set to catch key transitions without alert spam
────────────────────────────────────────
3) What you see on the chart
────────────────────────────────────────
For each level (L1–L4), you can show:
• Upper/Lower Inner rails
• Upper/Lower Outer rails
• Optional center fill (between outer rails) = operating range
• Optional MA line per tier (off by default to reduce clutter)
• Base WMA line (L1 MA) if enabled
Suggested workflow:
• Start with L1 + L2 only
• Add L3/L4 once you like the structure view
• Use Dynamic Opacity if the chart feels crowded
────────────────────────────────────────
4) How it works (transparent formula)
────────────────────────────────────────
For each tier:
• MA = WMA(source, baseLen × levelMultiplier)
• ATR_like = Wilder ATR (default)
OR WMA(TrueRange, atrLen × levelMultiplier)
Inner rails:
• upperInner = MA + ATR_like × innerMult
• lowerInner = MA - ATR_like × innerMult
Outer rails:
• upperOuter = MA + ATR_like × outerMult
• lowerOuter = MA - ATR_like × outerMult
Tier behavior:
• L1 uses the chart timeframe
• L2–L4 can use user-selected HTFs (defaults: 4H / D / W)
or optional auto-selection
────────────────────────────────────────
5) Multi-timeframe behavior + interpolation
────────────────────────────────────────
• L2–L4 use request.security() with lookahead OFF (no future data).
• HTF bands naturally “step” when the HTF candle confirms.
• Interpolate HTF Bands (optional): visually blends from the prior confirmed HTF value to the current confirmed HTF value to reduce stepping. This is display smoothing, not prediction.
Repaint note:
• If Live Interp (Repaints) is enabled, the HTF lines can update intrabar and may repaint. Keep it OFF for strict non-repainting behavior.
────────────────────────────────────────
6) Auto-select L2/L3/L4 (optional)
────────────────────────────────────────
Two modes:
A) Ladder (deterministic)
• Picks “bigger” timeframes relative to the chart (simple and fast).
B) Score (data-driven)
• Tests candidate timeframes and scores them using:
• Coverage: % of closes inside the OUTER band over Score Lookback
• Width: average outer-band width as a fraction of MA
• Targets: Target Coverage + Target Width
• Weights: Coverage Weight + Width Weight
Performance notes:
• Score mode is heavier (many candidates).
• “Lock auto-select after first pick” is recommended to reduce load and avoid platform limits.
────────────────────────────────────────
7) Alerts (6 total, aggregated across L1–L4)
────────────────────────────────────────
Alerts trigger if ANY tier meets the condition:
• Cross ABOVE an OUTER band
• Cross BELOW an OUTER band
• Cross ABOVE an INNER band
• Cross BELOW an INNER band
• Price is OUTSIDE ABOVE an OUTER band
• Price is OUTSIDE BELOW an OUTER band
These are intentionally aggregated to keep the alert count small while catching meaningful transitions.
────────────────────────────────────────
8) Limitations & transparency
────────────────────────────────────────
• Indicator only (not a strategy). No performance claims.
• MTF values update when the higher timeframe candle confirms.
• Interpolation is visual smoothing; it does not forecast.
• Non-standard chart types (Heikin Ashi/Renko/etc) may behave differently from standard candles.
• If you enable repainting options, signals/levels may change intrabar.
────────────────────────────────────────
9) Credits/reuse disclosure
────────────────────────────────────────
• Conceptual inspiration: VDUB and the community “VDUB_BINARY_PRO_3_V2” idea of WMA ± TR/ATR × multipliers.
• This version is a reimplementation + extension, adding:
o Multi-tier architecture (L1–L4)
o Higher-timeframe sourcing + optional interpolation
o Optional scoring-based timeframe selection
o Dynamic opacity + streamlined plotting
o Aggregated 6-alert set
No code was copied directly from the older script; this is a rewritten implementation with additional features and different structure.
www.tradingview.com
Ian Trades COT Net PositionsThe COT net positions indicator shows how many futures contracts big traders are buying minus how many they are selling.
1H ETH Volume Breakout [ADX Filtered]Title: 1H ETH Volume Breakout w/ ADX Filter
Description:
🚀 Strategy Overview
This strategy is a high-precision Volatility Breakout system designed specifically for Ethereum (ETH) on the 1H timeframe. It focuses on catching explosive moves while aggressively filtering out market noise and "chop" to protect capital.
Unlike standard breakout strategies that get wrecked in sideways markets, this script uses a multi-layer confirmation system (Volume + Trend + Momentum + ADX) to ensure high-probability entries.
🧠 The Logic (How it works)
Keltner Channel Breakout: We use Keltner Channels (Length 22, Multiplier 2.0) instead of Bollinger Bands because they adapt better to ETH's unique volatility, reducing fake-outs.
Volume Confirmation: A trade is only taken if the current volume spikes above the moving average. "No Volume = No Trade."
Trend Filter (220 EMA): We only trade Long when price is above the 220 EMA, and Short when below. We trade with the dominant trend, never against it.
The "Chop Killer" (ADX Filter): An added ADX filter ensures the trend has real strength before entering. If the market is flat (ADX < 20), the strategy sits on the sideline.
🛡️ Risk Management (The "Fee Crusher")
Dynamic Stop Loss: Uses ATR (4.0) to give trades room to breathe without getting wicked out.
Trailing Stop: Activates after a 3% gain to lock in profits during big pumps.
Money Management: Includes a built-in Compounding feature (Optional).
⚙️ Recommended Settings
Coin: ETH/USD or ETH/USDT
Timeframe: 1 Hour (1H)
Leverage: 2x (Recommended)
Exchange Fees: Tuned for 0.1% fees.
⚠️ Disclaimer
Past performance is not indicative of future results. Please backtest with your own exchange settings before using real capital. This is an open-source tool for educational purposes.
Ian Trades COT Net PositionsThe COT net positions indicator shows how many futures contracts big traders are buying minus how many they are selling.
Guac's MAs, BBs, and ADX (SMA/EMA/BB + ADX/DI + Daily ATR)As someone who browses through numerous TradingView scripts, I find many ideas/functions that I find useful. However, sometimes I find certain features that I don't find useful or that could be added to make something more useful. Because of this I designed this script to collectively encompass functionality of the items/indicators I find useful when looking at an index/equity chart.
This script was desgined/inspired to keep the chart clean while providing signal context for trend, volatility, price action, and regime conditions.
Summary of what this script does:
Plots a compact, customizable set of SMAs + EMAs for structure and trend layering.
Adds Bollinger Bands with expansion/contraction coloring to visualize volatility state.
Optionally overlays ADX/DI regime context, including:
• an ADX-based “regime fill” (temperature-style colors) on the BB fill
• optional DI+ / DI- cross markers for directional shift awareness
• expanded ADX regime labels (Dead Chop → Very Strong/Extended)
• optional “ADX momentum” (smoothed ADX slope) in the status label to show regime acceleration/decay
Provides a small corner “Regime Status Label” that summarizes ADX regime (with numeric ADX) when enabled.
Optionally appends Daily ATR (value + momentum) to the same label for range/volatility context that is consistent across intraday timeframes.
I always find it frustrating when I am testing or playing with someones indicator and they don't have tooltips implemented so that I can understand the purpose of their parameters and the inputs. I have specifically tried to implement tooltip info bubbles next to every parameter input to give a short explanation of the parameter and it's purpose
Fifty Two Week Highs and Lows Displays 52-week highs and lows with percentage distance context, optional dashboard, and visual connections between successive new highs for long-term range awareness.
Fifty Two Week Highs and Lows
This indicator provides clear, objective context around price location within its 52-week range. It is designed to help users quickly assess how extended or compressed price is relative to its long-term highs and lows, without generating trade signals or placing orders.
What the indicator does
Calculates 52-week highs and lows using one of two reference definitions:
Daily (252 bars): Rolling high and low over a configurable number of daily bars, best suited for Daily charts.
Weekly (52 weeks): True weekly 52-week high and low values projected onto the active chart timeframe.
Displays a compact dashboard showing:
Percent below the 52-week high
Percent above the 52-week low
Both values are color-coded to provide immediate visual context.
Optionally draws lines connecting successive new 52-week highs, making sequences of higher highs easier to observe.
Alerts
Optional indicator alerts are included for:
New 52-week highs (Daily or Weekly mode)
Price entering defined distance zones relative to the 52-week high or low
All alerts are evaluated on confirmed bar close.
How to use
Add the indicator to any chart and select the preferred 52-week reference mode.
Use the dashboard values as context, not signals, to understand where price sits within its long-term range.
Enable alerts if you want notifications when price reaches specific distance thresholds.
Notes
In Weekly mode, values are derived from higher-timeframe weekly data and projected onto the active chart.
This script is an indicator only and does not place trades.
Educational and informational use only.
TheStrat MasterThe Strat refers to a trading strategy that simplifies market analysis by focusing on price action and candlestick patterns. Here are some key points about The Strat:
Candlestick Patterns: The Strat categorizes price bars into Inside Bars, Directional Bars, and Outside Bars, which help traders identify potential trading opportunities.
1
Simple Rules: It emphasizes three main components: price action, direction, and time frame alignment, making it accessible for both new and experienced traders.
1
Decision-Making: The Strat provides a framework for making decisions based on price movements, reducing emotional trading and improving accuracy.
1
Educational Resources: There are various resources available, including cheat sheets and mentorship programs, to help traders learn and apply The Strat effectively.
1
For more detailed information, you can explore the resources provided in the results.
15min & 5min Scalping RibbonOpen-source replication of Annii's Ribbon:
Not quite 100% pixel perfect but very close, with the same functionality for detecting possible trend changes.
Ribbon Scalp Strategy
TF: 5-15 mins
When to enter long:
Wait for whole ribbon to turn green then enter long
Once in the trade watch the outer 3 lines. If they start to spread away from the others, that’s a sign that a pullback is coming so ether exit or move your stop into profit to protect it
When a pullback happens, watch the yellow band for a bounce. If it bounces off, stay in trade. Cross below, could be reversal sign so get out. When moving stops throughout the trade, use the yellow band as a guide to know where to move stop too, placing it just below the line.
There are two yellow MAs. When you start your session, look left to see which one has been acting as support for the past few hours and go with that one.
As long as it stays above the yellow, you can stay in the trade. Again exit, when outer bands start to widen.
Short - everything above in reverse.
What not to do:
Do not try to pick a reversal early when you start to see one or two bands turn red - this does not mean a reversal is coming! It could just be a pullback before continuing long.
