Empiece

Análisis de tendencia

Instant Breakout Strategy with RSI & VWAPInstant Breakout Strategy with RSI & VWAP This TradingView strategy (Pine Script v6) trades breakouts using pivot points, with optional filters for volume, momentum, RSI, and VWAP. It’s optimized for the 1-second timeframe. Overview The strategy identifies breakouts when price crosses above resistance (pivot highs) or below support (pivot lows). It can use basic pivot breakouts or add filters for stronger signals. Take-profit and stop-loss levels are set using ATR, and signals are shown on the chart. Inputs Left/Right Pivot Bars: Bars to detect pivots (default: 3). Lower values increase sensitivity. Volume Surge Multiplier: Volume threshold vs. 20-period average (default: 1.5). Momentum Threshold: Minimum % price change from bar open (default: 1%). Take-Profit ATR Multiplier: ATR multiplier for take-profit (default: 9.0). Stop-Loss ATR Multiplier: ATR multiplier for stop-loss (default: 1.0). Use Filters: Enable/disable volume, momentum, RSI, and VWAP filters (default: off). How It Works 1. Pivot Detection Finds pivot highs (resistance) and lows (support) using ta.pivothigh and ta.pivotlow. Tracks the latest pivot levels. 2. Volume Surge Compares current volume to a 20-period volume average. A surge occurs if volume exceeds the average times the multiplier. 3. Momentum Measures price change from the bar’s open. Bullish: Price rises >1% from open. Bearish: Price falls >1% from open. 4. RSI and VWAP RSI: 3-period RSI. Above 50 is bullish; below 50 is bearish. VWAP: Price above VWAP is bullish; below is bearish. 5. ATR 14-period ATR sets take-profit (close ± atr * 9.0) and stop-loss (close ± atr * 1.0). Trading Rules Breakout Conditions Bullish Breakout: Price crosses above the latest pivot high. With filters: Volume surge, bullish momentum, RSI > 50, price > VWAP. Without filters: Only the crossover is needed. Bearish Breakout: Price crosses below the latest pivot low. With filters: Volume surge, bearish momentum, RSI < 50, price < VWAP. Without filters: Only the crossunder is needed. Entries and Exits Long: Enter on bullish breakout. Set take-profit and stop-loss. Close any short position. Short: Enter on bearish breakout. Set take-profit and stop-loss. Close any long position. Visuals Signals: Green triangles (bullish) below bars, red triangles (bearish) above bars. Pivot Levels: Green line (resistance), red line (support). Indicators: RSI (blue, separate pane), VWAP (purple, on chart). How to Use Apply to a 1-second chart in TradingView for best results. Adjust inputs (e.g., pivot bars, multipliers). Enable filters for stricter signals. Watch for buy/sell triangles and monitor RSI/VWAP. Use ATR-based take-profit/stop-loss for risk management. Notes Best on 1-second timeframe due to fast RSI and responsiveness. Disable filters for more signals (less confirmation). Backtest before live trading to check performance. This strategy uses pivots, volume, momentum, RSI, and VWAP for clear breakout trades on the 1-second timeframe.
Estrategia Pine Script®
por thetraderlodge
2
ATAI Volume Pressure Analyzer V 1.0 — Pure Up/DownATAI Volume Pressure Analyzer V 1.0 — Pure Up/Down Overview Volume is a foundational tool for understanding the supply–demand balance. Classic charts show only total volume and don’t tell us what portion came from buying (Up) versus selling (Down). The ATAI Volume Pressure Analyzer fills that gap. Built on Pine Script v6, it scans a lower timeframe to estimate Up/Down volume for each host‑timeframe candle, and presents “volume pressure” in a compact HUD table that’s comparable across symbols and timeframes. 1) Architecture & Global Settings Global Period (P, bars) A single global input P defines the computation window. All measures—host‑TF volume moving averages and the half‑window segment sums—use this length. Default: 55. Timeframe Handling The core of the indicator is estimating Up/Down volume using lower‑timeframe data. You can set a custom lower timeframe, or rely on auto‑selection: ◉ Second charts → 1S ◉ Intraday → 1 minute ◉ Daily → 5 minutes ◉ Otherwise → 60 minutes Lower TFs give more precise estimates but shorter history; higher TFs approximate buy/sell splits but provide longer history. As a rule of thumb, scan thin symbols at 5–15m, and liquid symbols at 1m. 2) Up/Down Volume & Derived Series The script uses TradingView’s library function tvta.requestUpAndDownVolume(lowerTf) to obtain three values: ◉ Up volume (buyers) ◉ Down volume (sellers) ◉ Delta (Up − Down) From these we define: ◉ TF_buy = |Up volume| ◉ TF_sell = |Down volume| ◉ TF_tot = TF_buy + TF_sell ◉ TF_delta = TF_buy − TF_sell A positive TF_delta indicates buyer dominance; a negative value indicates selling pressure. To smooth noise, simple moving averages of TF_buy and TF_sell are computed over P and used as baselines. 3) Key Performance Indicators (KPIs) Half‑window segmentation To track momentum shifts, the P‑bar window is split in half: ◉ C→B: the older half ◉ B→A: the newer half (toward the current bar) For each half, the script sums buy, sell, and delta. Comparing the two halves reveals strengthening/weakening pressure. Example: if AtoB_delta < CtoB_delta, recent buying pressure has faded. [ 4) HUD (Table) Display /i] Colors & Appearance Two main color inputs define the theme: a primary color and a negative color (used when Δ is negative). The panel background uses a translucent version of the primary color; borders use the solid primary color. Text defaults to the primary color and flips to the negative color when a block’s Δ is negative. Layout The HUD is a 4×5 table updated on the last bar of each candle: ◉ Row 1 (Meta): indicator name, P length, lower TF, host TF ◉ Row 2 (Host TF): current ↑Buy, ↓Sell, ΔDelta; plus Σ total and SMA(↑/↓) ◉ Row 3 (Segments): C→B and B→A blocks with ↑/↓/Δ ◉ Rows 4–5: reserved for advanced modules (Wings, α/β, OB/OS, Top 5) Advanced Modules 5.1 Wings “Wings” visualize volume‑driven movement over C→B (left wing) and B→A (right wing) with top/bottom lines and a filled band. Slopes are ATR‑per‑bar normalized for cross‑symbol/TF comparability and converted to angles (degrees). Coloring mirrors HUD sign logic with a near‑zero threshold (default ~3°): ◉ Both lines rising → blue (bullish) ◉ Both falling → red (bearish) ◉ Mixed/near‑zero → gray Left wing reflects the origin of the recent move; right wing reflects the current state. 5.2 α / β at Point B We compute the oriented angle between the two wings at the midpoint B: β is the bottom‑arc angle; α = 360° − β is the top‑arc angle. ◉ Large α (>180°) or small β (<180°) flags meaningful imbalance. ◉ Intuition: large α suggests potential selling pressure; small β implies fragile support. HUD cells highlight these conditions. 5.3 OB/OS Spike OverBought/OverSold (OB/OS) labels appear when directional volume spikes align with a 7‑oscillator vote (RSI, Stoch, %R, CCI, MFI, DeMarker, StochRSI). ◉ OB label (red): unusually high sell volume + enough OB votes ◉ OS label (teal): unusually high buy volume + enough OS votes Minimum votes and sync window are user‑configurable; dotted connectors can link labels to the candle wick. 5.4 Top3 Volume Peaks Within the P window the script ranks the top three BUY peaks (B1–B3) and top three SELL peaks (S1–S3). ◉ B1 and S1 are drawn as horizontal resistance (at B1 High) and support (at S1 Low) zones with adjustable thickness (ticks/percent/ATR). ◉ The HUD dedicates six cells to show ↑/↓/Δ for each rank, and prints the exact High (B1) and Low (S1) inline in their cells. 6) Reading the HUD — A Quick Checklist ◉ Meta: Confirm P and both timeframes (host & lower). ◉ Host TF block: Compare current ↑/↓/Δ against their SMAs. ◉ Segments: Contrast C→B vs B→A deltas to gauge momentum change. ◉ Wings: Right‑wing color/angle = now; left wing = recent origin. ◉ α / β: Look for α > 180° or β < 180° as imbalance cues. ◉ OB/OS: Note labels, color (red/teal), and the vote count. ◉Top3: Keep B1 (resistance) and S1 (support) on your radar. Use these together to sketch scenarios and invalidation levels; never rely on a single signal in isolation. [ 7) Example Highlights (What the table conveys) /i] ◉ Row 1 shows the indicator name, the analysis length P (default 55), and both TFs used for computation and display. ◉ B1 / S1 blocks summarize each side’s peak within the window, with Δ indicating buyer/seller dominance at that peak and inline price (B1 High / S1 Low) for actionable levels. ◉ Angle cells for each wing report the top/bottom line angles vs. the horizontal, reflecting the directional posture. ◉ Ranks B2/B3 and S2/S3 extend context beyond the top peak on each side. ◉ α / β cells quantify the orientation gap at B; changes reflect shifting buyer/seller influence on trend strength. Together these visuals often reveal whether the “wings” resemble a strong, upward‑tilted arm supported by buyer volume—but always corroborate with your broader toolkit 8) Practical Tips & Tuning ◉ Choose P by market structure. For daily charts, 34–89 bars often works well. ◉ Lower TF choice: Thin symbols → 5–15m; liquid symbols → 1m. ◉ Near‑zero angle: In noisy markets, consider 5–7° instead of 3°. ◉ OB/OS votes: Daily charts often work with 3–4 votes; lower TFs may prefer 4–5. ◉ Zone thickness: Tie B1/S1 zone thickness to ATR so it scales with volatility. ◉ Colors: Feel free to theme the primary/negative colors; keep Δ<0 mapped to the negative color for readability. Combine with price action: Use this indicator alongside structure, trendlines, and other tools for stronger decisions. Technical Notes Pine Script v6. ◉ Up/Down split via TradingView/ta library call requestUpAndDownVolume(lowerTf). ◉ HUD‑first design; drawings for Wings/αβ/OBOS/Top3 align with the same sign/threshold logic used in the table. Disclaimer: This indicator is provided solely for educational and analytical purposes. It does not constitute financial advice, nor is it a recommendation to buy or sell any security. Always conduct your own research and use multiple tools before making trading decisions.
Indicador Pine Script®
por ata_sabanci
9
Candlestick Patterns Dashboard Pro+ [ULTIMATE]Unleash the power of automated candlestick analysis with the most comprehensive and customizable pattern detection tool on TradingView. This is not just another pattern scanner; it's a complete trading dashboard designed to identify, score, and confirm high-probability setups, saving you hours of manual chart analysis. Built with performance and reliability in mind, this script goes beyond simple detection by introducing a unique reliability score for every pattern, advanced confirmation filters, and a powerful on-screen dashboard to keep you informed. Key Features 📈 Comprehensive Pattern Detection: Automatically identifies 13 of the most effective candlestick patterns, including Bullish/Bearish Engulfing, Hammer, Shooting Star, Doji, Morning/Evening Star, and more. 🔟 Dynamic Reliability Scoring: Every pattern is assigned a score from 1-10 based on its confirmation strength. Factors include candle body size, volume confirmation, trend alignment, and higher-timeframe confluence, giving you a quantifiable measure of a pattern's potential. 📊 The Ultimate Dashboard: Your at-a-glance command center. The on-screen dashboard provides a complete summary of all active patterns, showing you exactly when they last occurred and highlighting the most recent signals. It also includes an "Overall Bias" meter for a quick sentiment check. 🛡️ Trade Smarter with Advanced Confirmation Filters: Eliminate low-quality signals and focus on what matters. Trend Alignment: Use SMA(50) and SMA(200) to only show patterns that agree with the dominant market trend. Volume Confirmation: Validate patterns by requiring a surge in volume. Non-Repainting HTF Confirmation: Ensure your patterns align with the trend on a higher timeframe (e.g., Daily trend for a 4H signal) using a reliable, non-repainting method. Market Condition Filter: Isolate patterns that occur only in "Trending" or "Ranging" markets. Time Filter: Restrict pattern detection to specific trading sessions. 🔧 ‘Fuzzy Logic’ for Real-World Trading: Textbook patterns are rare. Use the "Fuzzy Logic" settings to adjust the criteria for patterns like the Hammer, Piercing Line, and Doji, allowing you to catch imperfect but still valid real-world formations. ⚙️ Fully Customizable Scoring: You decide what's important! Adjust the bonus scores for volume, trend, and other factors to create a scoring system that perfectly aligns with your trading strategy. 🚨 Powerful & Customizable Alerts: Never miss an opportunity. Create alerts for any individual pattern. Get notified of "Pattern Clusters" when multiple bullish or bearish signals appear in close succession. Customize the alert messages to be compatible with your favorite trading automation services. 🚀 Performance Optimized: A "Max Bars Back" setting ensures the script runs smoothly and efficiently, even on lower-end devices or extensive historical data. How To Use This Indicator For Confirmation: The primary strength of this tool is for confirmation. Do not trade based on patterns alone. Use the detected signals to confirm your own analysis, such as a pattern appearing at a key support/resistance level, a trendline, or a Fibonacci retracement. A Bullish Engulfing pattern at a major support level is a much stronger signal than one appearing in the middle of a range. For Discovery: Use the Dashboard to quickly scan through your favorite assets. A dashboard full of recent bullish signals on one asset, and bearish on another, can instantly help you focus your attention for the day. Customizing for Your Style: Start with the Market Presets ("Forex," "Stocks," "Crypto") for a solid baseline. Dive into the Scoring Weights to tell the indicator what you value most. A pure volume trader might increase the Volume Bonus score. Adjust the Fuzzy Logic settings based on your market's volatility. A volatile crypto market might require a more lenient Doji definition than a stable blue-chip stock. Setting Up Alerts: Add the indicator to your chart. Click the "Alert" button in the TradingView toolbar. Set the "Condition" to "Candlestick Patterns Dashboard Pro+ ". Choose the specific alert you want from the dropdown (e.g., "Bullish Pattern Detected," "Bearish Pattern Cluster"). Customize the message if needed and click "Create." A Note of Thanks This script began as a personal project and has evolved into this ultimate version thanks to invaluable community feedback, bug reports, and suggestions. A special thank you to the users who helped identify and fix critical bugs related to syntax and variable scope. This collaborative effort has made the indicator more robust and reliable for everyone. Disclaimer: This tool is for educational and analytical purposes only. All trading involves substantial risk. Past performance is not indicative of future results. Please trade responsibly.
Indicador Pine Script®
por IndicatorEdge
(ES, NQ) Trend Checker SB1(ES, NQ) Trend Checker SB1 Stay ahead of the market by tracking whether the E-mini S&P 500 (ES) and the Nasdaq 100 (NQ) are moving in sync. 📊 How it works: The script checks whether each index is bullish (close > open) or bearish (close < open). If both are aligned (all bullish or all bearish), conditions are stable. If they diverge, the indicator instantly flags a mismatch in trend. 🎯 Features: Background shading to highlight mismatched conditions. Real-time alerts when ES and NQ fall out of sync. Works on any timeframe. 🔥 Why it matters: When ES and NQ move together, market momentum is usually stronger and cleaner. But when they disagree, expect choppiness, fakeouts, or caution zones — the perfect heads-up before entering trades.
Indicador Pine Script®
por samb817
Renko Open Range delta Delta Renko-Style Indicator Guide (NQ Focus) This indicator takes inspiration from the Renko Chart concept and is optimized for the RTH session (New York time zone), specifically applied to the Nasdaq futures (NQ) product. If you’re unfamiliar with Renko charts, it may help to review their basics first, as this indicator borrows their clean, block-based perspective to simplify price interpretation. ⸻ 🔧 How the Indicator Works • At market open (9:30 AM EST), the indicator plots a horizontal open price line, referred to as 0 delta. • From this anchor, it plots 10 incremental levels (deltas) both above and below the open, each spaced by 62.5 NQ points. Why 62.5? • With NQ currently trading in the 23,000–24,000 range, a 62.5-point move represents roughly 0.26% of the daily average range. • This makes each delta step significant enough to capture movement while filtering out smaller noise. A mini table (location adjustable) displays: • Current delta zone • Last touched delta level This gives you a quick snapshot of where price sits relative to the open. ⸻ 📈 How to Read the Market • At the open, price typically oscillates between 0 and +1 / -1 delta. • A break beyond this zone often signals stronger directional intent: • Trending day: price can push into +2, +3, +4, +5 (or the inverse for downside). • Range day: expect price to bounce between +1, 0, -1 deltas. ⚠️ Note: This is a visualization tool, not a trading system. Its purpose is to help you quickly recognize range vs. trend conditions. ⸻ 📊 Example • In this case, NQ reached +1 delta shortly after open. • A retest of 0 delta followed, and price later surged to +5/+6 deltas (helped by Fed news). ⸻ 🛠️ Practical Uses This indicator can help you: • Define profit targets • Place hard stop levels • Gauge whether a counter-trend trade is worth the risk ⚠️ Caution: Avoid counter-trend trades if price is aggressively pushing toward +5/+6 or -5/-6 deltas, as trend exhaustion usually hasn’t set in yet. ⸻ 🔄 Adapting for ES (S&P Futures) • On NQ, 62.5 points ≈ $1,250 per contract. • For ES, this translates to 25 points. • Since 1 NQ contract ≈ 2 ES contracts in dollar terms, an optimized ES delta step would be 12.5 points. You may also experiment with different delta values (e.g., 50 or 31.25 for NQ) to align with your risk profile and trading style. ⸻ 🧪 Extending Beyond NQ You can experiment with applying this indicator to ES or even stocks, but non-futures assets may require additional calibration and testing. ⸻ ✅ Bottom line: This tool provides a clean, Renko-inspired framework for quickly gauging trend vs. range conditions, setting realistic profit targets, and avoiding poor counter-trend setups.
Indicador Pine Script®
por DeLeBlanc
Advanced Trend Momentum [Alpha Extract]The Advanced Trend Momentum indicator provides traders with deep insights into market dynamics by combining exponential moving average analysis with RSI momentum assessment and dynamic support/resistance detection. This sophisticated multi-dimensional tool helps identify trend changes, momentum divergences, and key structural levels, offering actionable buy and sell signals based on trend strength and momentum convergence. 🔶 CALCULATION The indicator processes market data through multiple analytical methods: Dual EMA Analysis: Calculates fast and slow exponential moving averages with dynamic trend direction assessment and ATR-normalized strength measurement. RSI Momentum Engine: Implements RSI-based momentum analysis with enhanced overbought/oversold detection and momentum velocity calculations. Pivot-Based Structure: Identifies and tracks dynamic support and resistance levels using pivot point analysis with configurable level management. Signal Integration: Combines trend direction, momentum characteristics, and structural proximity to generate high-probability trading signals. Formula: Fast EMA = EMA(Close, Fast Length) Slow EMA = EMA(Close, Slow Length) Trend Direction = Fast EMA > Slow EMA ? 1 : -1 Trend Strength = |Fast EMA - Slow EMA| / ATR(Period) × 100 RSI Momentum = RSI(Close, RSI Length) Momentum Value = Change(Close, 5) / ATR(10) × 100 Pivot Support/Resistance = Dynamic pivot arrays with configurable lookback periods Bullish Signal = Trend Change + Momentum Confirmation + Strength > 1% Bearish Signal = Trend Change + Momentum Confirmation + Strength > 1% 🔶 DETAILS Visual Features: Trend EMAs: Fast and slow exponential moving averages with dynamic color coding (bullish/bearish) Enhanced RSI: RSI oscillator with color-coded zones, gradient fills, and reference bands at overbought/oversold levels Trend Fill: Dynamic gradient between EMAs indicating trend strength and direction Support/Resistance Lines: Horizontal levels extending from pivot-based calculations with configurable maximum levels Momentum Candles: Color-coded candlestick overlay reflecting combined trend and momentum conditions Divergence Markers: Diamond-shaped signals highlighting bullish and bearish momentum divergences Analysis Table: Real-time summary of trend direction, strength percentage, RSI value, and momentum reading Interpretation: Trend Direction: Bullish when Fast EMA crosses above Slow EMA with strength confirmation Trend Strength > 1%: Strong trending conditions with institutional participation RSI > 70: Overbought conditions, potential selling opportunity RSI < 30: Oversold conditions, potential buying opportunity Momentum Divergence: Price and momentum moving opposite directions signal potential reversals Support/Resistance Proximity: Dynamic levels provide optimal entry/exit zones Combined Signals: Trend changes with momentum confirmation generate high-probability opportunities 🔶 EXAMPLES Trend Confirmation: Fast EMA crossing above Slow EMA with trend strength exceeding 1% and positive momentum confirms strong bullish conditions. Example: During institutional accumulation phases, EMA crossovers with momentum confirmation have historically preceded significant upward moves, providing optimal long entry points. 15min 4H Momentum Divergence Detection: RSI reaching overbought levels while momentum decreases despite rising prices signals potential trend exhaustion. Example: Bearish divergence signals appearing at resistance levels have marked major market tops, allowing traders to secure profits before corrections. Support/Resistance Integration: Dynamic pivot-based levels combined with trend and momentum signals create high-probability trading zones. Example: Bullish trend changes occurring near established support levels offer optimal risk-reward entries with clearly defined stop-loss levels. Multi-Dimensional Confirmation: The indicator's combination of trend, momentum, and structural analysis provides comprehensive market validation. Example: When trend direction aligns with momentum characteristics near key structural levels, the confluence creates institutional-grade trading opportunities with enhanced probability of success. 🔶 SETTINGS Customization Options: Trend Analysis: Fast EMA Length (default: 12), Slow EMA Length (default: 26), Trend Strength Period (default: 14) Support & Resistance: Pivot Length for level detection (default: 10), Maximum S/R Levels displayed (default: 3), Toggle S/R visibility Momentum Settings: RSI Length (default: 14), Oversold Level (default: 30), Overbought Level (default: 70) Visual Configuration: Color schemes for bullish/bearish/neutral conditions, transparency settings for fills, momentum candle overlay toggle Display Options: Analysis table visibility, divergence marker size, alert system configuration The Advanced Trend Momentum indicator provides traders with comprehensive insights into market dynamics through its sophisticated integration of trend analysis, momentum assessment, and structural level detection. By combining multiple analytical dimensions into a unified framework, this tool helps identify high-probability opportunities while filtering out market noise through its multi-confirmation approach, enabling traders to make informed decisions across various market cycles and timeframes.
Indicador Pine Script®
por AlphaExtract
6
AndrologQuartileAndrologQuartile This indicator is based on the assumption that if a candle closes in the upper or lower quartile of its range, the next candle often tends to take out the high or low of that candle. The script does two things: It calculates and displays live statistics on how often this condition occurs and how often it is successful. It highlights candles that meet the quartile condition so you can track them in real time. It is most meaningful to use this indicator on higher timeframes (from 1h upwards). You can also set an alert: once configured, the alert will always trigger for the timeframe that was active at the moment of setup. Usage tip: Click the statistics panel in the top right corner to adjust settings and alerts. Adjustable parameters: Quartiles: Default values are 25% and 75%. Min Distance: Defines how far the high/low must be from the candle’s close (in %) to be considered relevant. A smaller value is applied automatically on intraday timeframes under 5 minutes.
Indicador Pine Script®
por trueandrolog
[blackcat] L1 Value Trend IndicatorOVERVIEW The L1 Value Trend Indicator is a sophisticated technical analysis tool designed for TradingView users seeking advanced market trend identification and trading signals. This comprehensive indicator combines multiple analytical techniques to provide traders with a holistic view of market dynamics, helping identify potential entry and exit points through various signal mechanisms. 📈 It features a main Value Trend line along with a lagged version, golden cross and dead cross signals, and multiple technical indicators including RSI, Williams %R, Stochastic %K/D, and Relative Strength calculations. The indicator also includes reference levels for support and resistance analysis, making it a versatile tool for both short-term and long-term trading strategies. ✅ FEATURES 📈 Primary Value Trend Line: Calculates a smoothed value trend using a combination of SMA and custom smoothing techniques 🔍 Value Trend Lag: Implements a lagged version of the main trend line for cross-over analysis 🚀 Golden Cross & Dead Cross Signals: Identifies buy/sell opportunities when the main trend line crosses its lagged version 💸 Multi-Indicator Integration: Combines multiple technical analysis tools for comprehensive market view 📊 RSI Calculations: Includes 6-period, 7-period, and 13-period RSI calculations for momentum analysis 📈 Williams %R: Provides overbought/oversold conditions using the Williams %R formula 📉 Stochastic Oscillator: Implements both Stochastic %K and %D calculations for momentum confirmation 📋 Relative Strength: Calculates relative strength based on highest highs and current price ✅ Visual Labels: Displays BUY and SELL labels on chart when crossover conditions are met 📣 Alert Conditions: Provides automated alert conditions for golden cross and dead cross events 📌 Reference Levels: Plots entry (25) and exit (75) reference lines for support/resistance analysis HOW TO USE Copy the Script: Copy the complete Pine Script code from the original file Open TradingView: Navigate to TradingView website or application Access Pine Editor: Go to the Pine Script editor (usually found in the chart toolbar) Paste Code: Paste the copied script into the editor Save Script: Save the script with a descriptive name like " L1 Value Trend Indicator" Select Chart: Choose the chart where you want to apply the indicator Add Indicator: Apply the indicator to your chart Configure Parameters: Adjust input parameters to customize behavior Monitor Signals: Watch for golden cross (BUY) and dead cross (SELL) signals Use Reference Levels: Monitor entry (25) and exit (75) lines for support/resistance levels LIMITATIONS ⚠️ Potential Repainting: The script may repaint due to lookahead bias in some calculations 📉 Lookahead Bias: Some calculations may reference future values, potentially causing repainting issues 🔄 Parameter Sensitivity: Results may vary significantly with different parameter settings 📉 Computational Complexity: May impact chart performance with heavy calculations on large datasets 📊 Resource Usage: Requires significant processing power for multiple indicator calculations 🔄 Data Sensitivity: Results may be affected by data quality and market conditions NOTES 📈 Signal Timing: Cross-over signals may lag behind actual price movements 📉 Parameter Optimization: Optimal parameters may vary by market conditions and asset type 📋 Market Conditions: Performance may vary significantly across different market environments 📈 Multi-Indicator: Combine signals with other technical indicators for confirmation 📉 Timeframe Analysis: Use multiple timeframes for enhanced signal accuracy 📋 Volume Analysis: Incorporate volume data for additional confirmation 📈 Strategy Integration: Consider using this indicator as part of a broader trading strategy 📉 Risk Management: Use signals as part of a comprehensive risk management approach 📋 Backtesting: Test parameter combinations with historical data before live trading THANKS 🙏 Original Creator: blackcat1402 creates the L1 Value Trend Indicator 📚 Community Contributions: Recognition to TradingView community for continuous improvements and contributions 📈 Collaborative Development: Appreciation for collaborative efforts in enhancing technical analysis tools 📉 TradingView Community: Special thanks to TradingView community members for their ongoing support and feedback 📋 Educational Resources: Recognition of educational resources that helped in understanding technical analysis principles
Indicador Pine Script®
por blackcat1402
Pivot Distance Strategy# Multi-Timeframe Pivot Distance Strategy ## Core Innovation & Originality This strategy revolutionizes moving average crossover trading by applying MA logic to **pivot distance relationships** instead of raw price data. Unlike traditional MA crossovers that react to price changes, this system reacts to **structural momentum changes** in how current price relates to recent significant pivot levels, creating earlier signals with fewer false positives. ## Methodology & Mathematical Foundation ### Pivot Distance Oscillator The strategy calculates: - **High Pivot Percentage**: (Current Close / Last Pivot High) × 100 - **Low Pivot Percentage**: (Last Pivot Low / Current Close) × 100 - **Pivot Distance**: High Pivot Percentage - Low Pivot Percentage This creates a standardized oscillator measuring market structure compression/expansion regardless of asset price or volatility. ### Multi-Timeframe Filter Higher timeframe analysis provides directional bias: - **HTF Long** → Allow long entries, force short exits - **HTF Short** → Allow short entries, force long exits - **HTF Squeeze** → Block all entries, force all exits ## Signal Generation Methods ### Method 1: Dual MA Crossover (Primary/Default) **Fast MA (14 EMA)** and **Slow MA (50 SMA)** applied to pivot distance values: - **Long Signal**: Fast MA crosses above Slow MA (accelerating bullish pivot momentum) - **Short Signal**: Fast MA crosses below Slow MA (accelerating bearish pivot momentum) **Key Advantage**: - Traditional: Fast MA(price) crosses Slow MA(price) - reacts to price changes - This Strategy: Fast MA(pivot distance) crosses Slow MA(pivot distance) - reacts to structural changes - Result: Earlier signals, better trend identification, fewer ranging market whipsaws ### Method 2: MA Cross Zero - **Long**: Pivot Distance MA crosses above zero - **Short**: Pivot Distance MA crosses below zero ### Method 3: Pivot Distance Breakout (Squeeze-Based) Uses dynamic threshold envelopes to detect compression/expansion cycles: - **Long**: Distance breaks above dynamic breakout threshold after squeeze - **Short**: Distance breaks below negative breakout threshold after squeeze **Note**: Only the Breakout method uses threshold envelopes; MA Cross modes operate without them for cleaner signals. ## Risk Management Integration - **ATR-Based Stops**: Entry ± (ATR × Multiplier) for stops/targets - **Trailing Stops**: Dynamic adjustment based on profit thresholds - **Cooldown System**: Prevents overtrading after stop-loss exits ## How to Use ### Setup (Default: MA Cross MA) 1. **Strategy Logic**: "MA Cross MA" for structural momentum signals 2. **MA Settings**: 14 EMA (fast) / 50 SMA (slow) - both adjustable 3. **Multi-Timeframe**: Enable HTF for trend alignment 4. **Risk Management**: ATR stop loss, ATR take profit ### Signal Interpretation - **Blue/Purple lines**: Fast/Slow MAs of pivot distance - **Green/Red histogram**: Positive/negative pivot distance - **Triangle markers**: MA crossover entry signals - **HTF display**: Shows higher timeframe bias (top-left) ### Trade Management - **Entry**: Clean MA crossover with HTF alignment - **Exit**: Opposite crossover, HTF change, or risk management triggers ## Unique Advantages 1. **Structural vs Price Momentum**: Captures market structure changes rather than just price movement, naturally filtering noise 2. **Multi-Modal Flexibility**: Three signal methods for different market conditions or strategies 3. **Timeframe Alignment**: HTF filtering improves win rates by preventing counter-trend trades
Estrategia Pine Script®
por ky_yule1010