Empiece

Signal

[ A L P H A X ] Impulse Bands - Adaptive Trend EngineAlphaX Impulse Bands — ATR-Normalized Adaptive Trend Engine, Impulse Freshness System, Multi-Confluence Confidence Scoring & Smart Retest Detection AlphaX Impulse Bands is a professional-grade adaptive trend following system built on a proprietary ATR-normalized impulse detection engine that continuously measures the strength, direction, and freshness of every price move. It delivers dynamic bands that physically breathe with volatility — tightening during fresh, high-conviction impulses and expanding during stale, uncertain market conditions. Three visual layers — the Trend Cloud, entry labels, and precision retest lines — work together with a multi-factor confidence scoring system and a triple-timeframe Williams %R confirmation gate to produce only the highest-quality signals. Designed for active traders across crypto, forex, indices, and commodities on any timeframe. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔬 The Impulse Engine — How It Works At the core of AlphaX Impulse Bands is the ATR-Normalized Impulse Engine — a proprietary system that measures momentum in a way that is consistent and comparable across all instruments and timeframes. Most adaptive band systems measure impulse by dividing price movement against MAD (Mean Absolute Deviation), which produces readings that vary wildly between low-volatility forex and high-volatility crypto. AlphaX Impulse Bands solves this by normalizing against ATR (Average True Range) instead — the same unit every professional volatility model uses. The result is an impulse score that means the same thing whether you are trading XAUUSD on M1 or BTC on H4. How the impulse is calculated: Raw Impulse — measures how far price has moved over the Impulse Lookback period, divided by ATR. If this movement exceeds the threshold (1.0×ATR), a new impulse event is registered. Impulse Direction — records whether the detected impulse is bullish or bearish, held in state until the next impulse event fires. Impulse Decay — once registered, the impulse strength decays each bar at the configured Decay Rate. This creates a natural fade — recent moves carry full weight, older moves gradually lose influence. Impulse Freshness — a normalized 0–100% score derived from current impulse strength. Fresh = high confidence. Stale = caution. Impulse Momentum — the rate of change of freshness across the last 3 bars. Used by the confidence scoring system to distinguish an impulse that is building from one that has already peaked and is fading. This multi-layer approach means the indicator is not just reacting to where price is — it is continuously answering the question: how energetic is the current move, and is that energy rising or falling? ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📐 The Adaptive Bands — Breathing With Volatility The bands are not fixed-width channels. They are living boundaries that respond to both market volatility and impulse freshness simultaneously. Band structure: Basis EMA — a trend-length EMA of close, forming the center reference line plotted as a subtle gray line MAD (Mean Absolute Deviation) — the volatility engine. Unlike ATR, MAD measures the average deviation of closes from their recent mean — capturing the texture of price noise directly Band Multiplier — dynamically calculated each bar as a blend between Band Min and Band Max, weighted by current Impulse Freshness The key relationship: When a fresh impulse fires → Freshness = high → Multiplier moves toward Band Min → Bands tighten — price is in a high-conviction directional move, the bands hug it closely As the impulse decays → Freshness falls → Multiplier moves toward Band Max → Bands expand — uncertainty is rising, the bands widen to reflect the broader range of possible outcomes A very stale market with no active impulse → Freshness near zero → Full Band Max width → Maximum caution zone This means the bands are effectively a real-time confidence visualizer . A trader glancing at the chart immediately understands: tight bands = strong move in progress, wide bands = market searching for direction. Band Squeeze Detection: The dashboard continuously displays band width as a percentage of price. When this drops below 2%, the dashboard flags SQUEEZE — a powerful pre-breakout warning that a large directional move is loading. Wider than 7% is flagged as WIDE — indicating elevated uncertainty or a post-impulse cool-down. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ☁ The Trend Cloud The Trend Cloud is a gradient-filled area plotted around price that provides instant visual identification of trend direction and structural support/resistance. How the cloud is constructed: Cloud Outer — the outer boundary of the cloud, positioned at the lower band during a bull trend and the upper band during a bear trend Cloud Inner — the inner boundary, sitting 45% of MAD inside the outer boundary — this inner line is the key level the Retest Engine watches Cloud Fill — gradient-shaded between inner and outer: yellow-green for bullish trend, red for bearish trend, opacity-graded for visual depth Reading the cloud: Price riding above an expanding yellow-green cloud → strong bull trend, cloud is acting as dynamic support Price riding below an expanding red cloud → strong bear trend, cloud is acting as dynamic resistance Cloud thin or collapsed → no meaningful impulse active, potential consolidation or trend transition zone Cloud color switching rapidly → choppy market, reduce position size or stand aside ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📊 Signal System — Three Layers AlphaX Impulse Bands produces three distinct signal types, each serving a specific role in the trade lifecycle: ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1 ─ Entry Labels ( ▲ S/A/B % / ▼ S/A/B % ) Entry labels fire when the indicator detects a confirmed trend flip — price breaking through the outer band with sufficient impulse and WPR confirmation. Each label carries two pieces of information: Tier — S, A, or B. Determined by the confidence score at signal time (S = 70%+, A = 55–69%, B = 25–54%) Confidence % — the raw score from the confidence engine, printed directly on the label Label colors reflect tier quality: S-Tier — brightest yellow-green (bull) or bright red (bear) — highest conviction setup A-Tier — primary yellow-green or primary red — strong setup B-Tier — dimmer shades — valid but lower conviction, consider smaller size A Signal Cooldown prevents multiple labels firing on the same trend flip during fast, multi-bar breakouts. Only signals that pass the minimum confidence threshold, the WPR confirmation gate, and the cooldown check are displayed. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2 ─ Retest Lines ( ✦ ) After a trend flip is confirmed and the Signal Buffer period has passed, the Retest Engine activates. It watches for price to pull back into the Cloud Inner boundary — the institutional re-entry zone where trends historically find continuation. When a valid retest is detected: A ✦ diamond marker appears at the retest bar — yellow-green for bull retests, red for bear retests A horizontal retest line is drawn from the retest bar extending forward by the configured number of bars — giving you a clear price level to watch for re-entry or stop placement A Retest Cooldown prevents line spam — minimum 55 bars between consecutive retest lines by default Retest signals represent the continuation trade opportunity — where traders who missed the initial flip can enter at a structurally superior price, with the cloud now acting as confirmed support or resistance behind them. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3 ─ Exit Markers ( ✕ ) Exit markers appear when one of two conditions is met: Trend Flip Exit — the opposite trend signal fires, indicating the trend has definitively reversed WPR Exhaustion Exit — the Fast WPR crosses through the configured exit level (default: above -15 for longs, below -85 for shorts), indicating momentum exhaustion in the direction of the trade. A minimum bars-in-trade requirement prevents premature WPR exits on the opening bars of a position. Exit markers are not necessarily a signal that the trend is over. They indicate that the current momentum leg is likely complete . Use them to: Take partial or full profit at the exhaustion point Tighten stop loss to protect gains Wait for the next ✦ retest signal before re-entering if the trend remains intact ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🧠 Multi-Confluence Confidence Scoring Every entry signal is evaluated in real time by the AlphaX Confidence Engine — a multi-factor scoring system that produces a score from 0 to 100 and assigns it a tier. Only signals meeting your configured minimum threshold are displayed. Bull Confidence Factors: Trend Flip Freshness (up to 25 points) Maximum score awarded only when the signal fires on the exact bar of the trend flip — confirming you are at the very beginning of the move, not chasing it Impulse Freshness (up to 20 points) The higher the current freshness reading, the more points awarded. A fully fresh impulse (80%+) scores 20 points; a stale impulse (below 20%) scores zero Impulse Direction Alignment (up to 10 points) Full points when the internal impulse direction agrees with the signal direction. Zero when it conflicts — a powerful cross-check that catches whipsaw moves where price crossed the band but momentum is still against you WPR Oversold Depth (up to 15 points) How deeply the Fast WPR penetrated oversold territory. Deeper = higher spring-loaded reversal potential = more points. WPR below -95 scores the maximum; WPR above -80 scores zero WPR Cross Timing (up to 10 points) A confirmed WPR cross back above the oversold level scores 10 points. Fast upward velocity scores 7. General bullish recovery scores 4 WPR Multi-Timeframe (up to 8 points) Triple WPR convergence (all three timeframes in oversold) scores 8 points. Medium WPR alone in oversold scores 5 WPR Slow Alignment (up to 5 points) When the Slow WPR confirms the macro trend direction, additional points are awarded Candle Quality (up to 5 points) A bullish close with body ratio above 50% scores 5 points. Any bullish close scores 2. Bearish closes score zero Volume Surge (up to 5 points) Volume 1.5× or more above the 20-bar SMA scores 5 points. Volume above the SMA scores 2 Impulse Momentum (up to 5 points) When impulse strength is actively building (positive momentum) additional points are awarded — distinguishing a move that is accelerating from one that is about to stall Penalty Deductions: Slow WPR in extreme overbought territory → -8 points (macro trend fighting the signal) Fast WPR still in overbought zone → -5 points Impulse nearly completely stale (freshness below 10%) → -10 points Extreme WPR velocity (likely spike or wick move) → -5 points The bear confidence scoring system mirrors this structure in reverse, with all conditions flipped for short setups. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📡 Triple WPR Confirmation Gate All signals pass through the WPR Confirmation Gate before being displayed. This is a separate binary filter — independent of the confidence score — that blocks signals when the oscillator context fundamentally disagrees with the signal direction. The gate requires at least one of the following to be true before a bull signal can fire: Fast WPR is in oversold territory Fast WPR has just crossed back above the oversold level Fast WPR is in a bullish recovery pattern (rising for 2+ bars) WPR Slow and Medium are both in the bullish alignment zone The same logic applies in reverse for bear signals. This gate can be toggled off in settings for traders who want band crossings alone to trigger signals, but it is on by default — and is one of the primary reasons AlphaX Impulse Bands produces significantly fewer false signals than typical adaptive band systems. Three WPR timeframes run simultaneously and feed both the gate and the confidence scoring: WPR Fast (8) — the primary signal oscillator, reacts immediately to price action WPR Medium (21) — the intermediate trend filter, confirms the broader momentum context WPR Slow (55) — the macro trend anchor, determines whether the overall market structure supports the signal Triple WPR Convergence — when all three timeframes simultaneously reach extreme levels — is flagged on the dashboard as ALL OVERSOLD or ALL OVERBOUGHT and awarded maximum bonus points in the confidence engine. This is the highest-quality WPR condition the system can detect. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📊 Live Dashboard The real-time dashboard displays the complete internal state of the indicator across five sections, updated on every bar close. IMPULSE ENGINE Impulse Strength — qualitative label (EXTREME / STRONG / MODERATE / WEAK / FADING) based on the raw impulse value Freshness — current freshness percentage with qualitative state (FRESH / ACTIVE / FADING / STALE). Highlighted in yellow-green when above 70% — the highest-confidence zone Impulse Direction — the direction of the most recent registered impulse (BULLISH / BEARISH) Band Width — current band width as a percentage of price, with SQUEEZE or WIDE flags when applicable OSCILLATORS WPR Fast / Med / Slow — current values with zone labels (OB / OS / MID for fast and medium, BULL / BEAR / NEUT for slow) WPR Velocity — the rate of change of Fast WPR (FAST UP / RISING / FLAT / FALLING / FAST DOWN) — critical for timing entries within a move WPR Alignment — whether Slow and Medium WPR are in the bull zone, bear zone, or neutral Triple WPR — flags ALL OVERSOLD or ALL OVERBOUGHT when all three timeframes converge, with background color highlight TREND STATE Trend — current trend direction (BULLISH / BEARISH / UNDEFINED) with background color highlight Trend Bars — the number of consecutive bars the current trend direction has been active Price vs EMA — how far the current close is from the Basis EMA as a percentage, with directional color coding CONFIDENCE Bull Conf / Bear Conf — current confidence scores with tier labels (S-TIER / A-TIER / B-TIER / BELOW MIN) Volume — current volume state (SPIKE / HIGH / NORMAL / DRY) with the volume ratio multiplier TRADE STATUS Position — current tracked position (LONG / SHORT / FLAT) with background highlight Entry Price — the close price at which the active signal fired Open P&L — live unrealized profit and loss in both price and percentage terms, color-coded green/red WPR Exit Watch — warns ⚠ NEAR BULL EXIT or ⚠ NEAR BEAR EXIT when the Fast WPR is approaching the configured exhaustion level — giving you advance notice before the exit trigger fires ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠ Identifying Choppy / Low-Quality Market Conditions Knowing when not to trade is just as valuable as knowing when to enter. AlphaX Impulse Bands gives you multiple clear visual and dashboard cues that the market is in a low-quality state: Visual cues to stand aside: Bands are very wide and expanding — the dashboard Band Width reading is high and climbing. No active impulse is driving direction — the market is searching, not trending Trend Cloud is thin or collapsing — when the cloud inner and outer converge, there is no structural trend backing any move. Wait for the cloud to separate and take on clear color Freshness dashboard shows STALE — the last impulse has fully decayed and no new one has fired. Any price movement is low-energy and likely to reverse or stall WPR Alignment shows NEUTRAL — neither the slow nor medium WPR are confirming a directional bias. Signals firing in this environment carry the lowest reliability Rapid trend color switching — if candles are alternating rapidly between yellow-green and red, the system is detecting micro-trend flips. The cooldown will block most signals, but the underlying message is clear: this is a range, not a trend No entry labels appearing despite trend flips — when the bands are crossing but no labels appear, the confidence engine and WPR gate are filtering them out. This is the system explicitly telling you: these setups do not meet the quality threshold What to do: Do not force entries — wait for a fresh impulse to register (Freshness dashboard turns FRESH with yellow-green highlight) Wait for Band Width to compress into SQUEEZE territory — this signals energy is coiling for a directional move Look for Triple WPR convergence on the dashboard — ALL OVERSOLD or ALL OVERBOUGHT are the highest-conviction pre-signal states After a trend flip label, wait for the first ✦ retest signal before committing capital — the retest confirms the trend has real momentum behind it and is not a false start ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🚀 How to Trade with AlphaX Impulse Bands — Step by Step Step 1 — Read the Dashboard Check Freshness: is the market FRESH or STALE? Check Band Width: is it squeezing or expanding? Check WPR Alignment: do the oscillators agree on direction? If all three are neutral or negative → do not trade. Wait for setup conditions to develop. Step 2 — Wait for a Trend Flip Label A ▲ label below the bar (bull) or ▼ label above the bar (bear) sets your directional bias Read the tier and confidence printed on the label. S-Tier is the strongest; B-Tier warrants smaller size Do not enter directly on the label — the optimal entry comes next Step 3 — Enter on Retest ( ✦ ) After the Signal Buffer period passes, watch for price to pull back into the Cloud Inner zone When a ✦ diamond appears, this is the structured re-entry — a continuation setup at a technically superior price with the cloud now acting as confirmed dynamic support or resistance behind you Place your stop loss beyond the retest level or just outside the opposite cloud boundary Step 4 — Monitor with the Dashboard Watch the WPR Exit Watch row — when it flashes ⚠ NEAR EXIT, begin preparing your exit Watch Freshness — if it drops to FADING or STALE during your trade, the momentum behind the move is diminishing Additional ✦ retest signals during the same trend are opportunities to add to your position or re-enter after a partial take-profit Step 5 — Exit on ✕ Mark A gray ✕ marker indicates either a confirmed trend flip or WPR exhaustion Take partial or full profit If no opposing trend label has appeared, wait for the next ✦ retest to confirm the trend is continuing before re-entering Step 6 — Trend Ends An opposing trend label (e.g., a ▼ label after you were long) confirms the trend has reversed Close any remaining position from the prior trend The new label resets the cycle — the dashboard Trade Status updates to the new position, and the Retest Engine resets its buffer for the new direction ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚡ Key Features 🔬 ATR-normalized impulse engine — consistent behavior across all instruments and timeframes, no manual recalibration needed 📈 Dual-layer volatility model — MAD for band texture, ATR for impulse normalization, combined into a single adaptive system 🌊 Freshness decay system — impulse strength and confidence degrade naturally over time, preventing stale signals from carrying full weight ☁ Adaptive Trend Cloud — breathes with volatility, tightens during fresh impulses, expands during uncertainty 📡 Triple WPR confirmation gate — Fast (8), Medium (21), and Slow (55) Williams %R must agree before signals fire 🏷 Tiered entry labels (S / A / B) with live confidence % — know the quality of every signal at a glance ✦ Intelligent retest engine — configurable buffer, cooldown, line extension, and width. Draws only meaningful retest levels, never spams 🧠 10-factor confidence scoring engine — freshness, impulse direction, WPR depth, timing, multi-timeframe, candle quality, volume, momentum, and penalty deductions 📊 26-row live dashboard — Impulse Engine, Oscillators, Trend State, Confidence, and Trade Status sections updated in real time 💹 Live Open P&L tracking — entry price and unrealized P&L displayed directly on the dashboard in price and percentage ⚠ WPR Exit Watch — advance warning before exhaustion exits fire, so you are never caught off guard 🎨 Cohesive dual-tone color theme — yellow-green for all bullish elements, red for all bearish elements, gray for neutral and exits 🔔 15 alert conditions — tiered entries, combined entries, exits, retests, Triple WPR states, freshness fade, and trend flips ⚙ Fully configurable — all periods, thresholds, multipliers, display toggles, colors, and filter modes are adjustable from the settings panel ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚙ Settings Reference Core Engine Trend Length — EMA period for the basis line and cloud anchor (default: 19) Impulse Lookback — bars over which the raw impulse move is measured (default: 5). Lower = more reactive Impulse Decay — per-bar decay multiplier for impulse freshness (default: 0.97). Higher = impulses stay fresh longer MAD Length — lookback for Mean Absolute Deviation calculation, controls band volatility sensitivity (default: 20) Adaptive Bands Band Min (Fresh Impulse) — tightest band multiplier applied during a fully fresh impulse (default: 1.5) Band Max (Stale Impulse) — widest band multiplier applied when impulse has fully decayed (default: 2.2) ATR Period — lookback for ATR-based impulse normalization (default: 14) WPR Context WPR Fast / Medium / Slow — three independent Williams %R periods (defaults: 8 / 21 / 55) WPR Oversold / Overbought — extreme zone thresholds used by the gate and confidence engine (defaults: -82 / -18) Signal Filters Min Confidence % — minimum score required for a signal to be displayed (default: 25%) Signal Cooldown — minimum bars between consecutive entry labels (default: 3) Require Volume Confirm — when enabled, signals are blocked if current volume is below the Min Volume Ratio threshold Min Volume Ratio — minimum volume relative to 20-bar average required when volume filter is active (default: 0.7×) Require WPR Confirmation — when enabled, signals only fire when WPR agrees with the trend direction. On by default — this is the primary noise gate Retest Engine Show Retest Levels — toggle retest lines and ✦ markers on or off Signal Buffer — bars to wait after a trend flip before the retest engine activates (default: 10) Retest Cooldown — minimum bars between consecutive retest line draws (default: 55) Retest Line Width — thickness of the horizontal retest lines (default: 2) Retest Line Extend — how many bars forward the retest line projects (default: 60) Exits Exit on Trend Flip — when enabled, an opposing signal triggers an immediate exit marker Exit on WPR Exhaustion — when enabled, WPR crossing the exit level triggers an exit marker WPR Exit Bull (above) — Fast WPR level above which a long exit fires (default: -15) WPR Exit Bear (below) — Fast WPR level below which a short exit fires (default: -85) Min Bars Before Exit — minimum bars in trade before a WPR exhaustion exit can trigger (default: 3) Display Show Trend Cloud / Show Outer Bands / Color Bars / Show Entry Labels / Show Freshness Indicator — individually toggle each visual layer Label Size — Tiny / Small / Normal Dashboard Show Dashboard — toggle the entire dashboard panel Position — Top Left / Top Right / Bottom Left / Bottom Right Dashboard Text — Tiny / Small / Normal Colors Bull Primary / Bright / Dim — the yellow-green family for all bullish elements Bear Primary / Bright / Dim — the red family for all bearish elements Neutral / Neutral Light — gray shades for exits, inactive states, and neutral conditions Text Light / Dashboard BG — dashboard typography and background colors ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔔 Alert Conditions (15 total) Tiered Entry Alerts S-Tier Bull Impulse — bull signal with confidence 70%+ A-Tier Bull Impulse — bull signal with confidence 55–69% B-Tier Bull Impulse — bull signal with confidence 35–54% S-Tier Bear Impulse — bear signal with confidence 70%+ A-Tier Bear Impulse — bear signal with confidence 55–69% B-Tier Bear Impulse — bear signal with confidence 35–54% Combined Entry Alerts Any Bull Impulse — any bull signal regardless of tier Any Bear Impulse — any bear signal regardless of tier Any Impulse Signal — any signal in either direction Exit Alerts Bull Exit — long position exit triggered Bear Exit — short position exit triggered Any Exit — exit in either direction Retest Alerts Bull Retest Level — a bullish retest level has been drawn Bear Retest Level — a bearish retest level has been drawn Any Retest — retest in either direction Special State Alerts Triple WPR Oversold — all three WPR timeframes simultaneously in oversold territory Triple WPR Overbought — all three WPR timeframes simultaneously in overbought territory Impulse Freshness Fading — freshness drops below 50%, signaling momentum decay Trend Flip — a trend direction change has been detected All alert messages include {{ticker}} and {{interval}} placeholders and are formatted for clean webhook integration. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🎯 Recommended Settings by Instrument & Timeframe The default configuration is optimized for XAUUSD and major forex pairs on M1–M15 : Confidence threshold at 25% captures valid setups while filtering genuine noise at fast timeframes WPR Confirmation Gate on by default — the primary protection against choppy market signals Decay Rate at 0.97 — impulses fade over approximately 30 bars, suitable for intraday momentum moves Band Min/Max at 1.5/2.2 — calibrated for gold and forex intraday volatility profiles For other instruments or timeframes, adjust: Higher timeframes (H1, H4, Daily) — increase Trend Length to 25–35, increase Confidence to 35–50%, increase Retest Cooldown to 100–150 Crypto (BTC, ETH) — increase Band Max to 2.8–3.5 to accommodate wider swings, increase ATR Period to 20 Indices (NAS100, US30, SPX500) — use defaults or slightly increase Impulse Lookback to 7–8 for smoother detection More signals — reduce Min Confidence %, disable Require WPR Confirmation, reduce Cooldown Fewer, cleaner signals — increase Min Confidence % to 40–55%, increase Signal Cooldown to 5–10, reduce Band Min to tighten the entry zone ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 👥 Who This Is For 📉 Trend traders and momentum followers — the adaptive band and freshness system is built specifically for riding directional moves with precision 🥇 Gold (XAUUSD) and forex scalpers — default settings tuned for intraday volatility on fast-moving instruments 📊 Index and crypto traders — the ATR normalization ensures the system adapts without manual recalibration across instruments 🧠 Systematic traders — the confidence scoring system provides a quantitative signal quality metric, not just visual arrows 📈 Traders who value clean charts — no indicator soup, no overlapping clutter. Every visual element serves a specific purpose ⚠ Traders who struggle with overtrading — the confidence filters, WPR gate, cooldown system, and freshness tracking physically prevent low-quality setups from appearing on the chart 🔄 Pullback traders — the retest engine was specifically designed to surface structured continuation entries within confirmed trends, not just initial breakout signals ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📝 Notes All signals are confirmed on bar close — the indicator is non-repainting by design The ATR normalization means the impulse threshold (1.0×ATR) is instrument-agnostic — no adjustment needed when switching between gold, forex, crypto, or indices Maximum 500 labels and 500 lines are used — on very low timeframes with extended chart history, the oldest labels and retest lines may be automatically removed by TradingView's rendering limits The Band Width squeeze detection in the dashboard is a leading indicator of volatility expansion — SQUEEZE conditions frequently precede the strongest impulse moves WPR Velocity displayed in the dashboard is particularly useful for timing exits within a move — FAST UP or FAST DOWN readings often precede exhaustion reversals The Trade Status section tracks position direction from signal to exit within a single chart session — it does not connect to your broker or brokerage account ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠ Disclaimer This indicator is a technical analysis and visualization tool intended for educational and informational purposes only. It does not constitute financial advice or a recommendation to buy or sell any financial instrument. All signals are generated from historical and real-time price data using mathematical calculations — their accuracy or profitability is not guaranteed. Past performance of any signal type does not guarantee future results. Always conduct your own analysis, use proper risk management, and consult a licensed financial advisor before making any trading decisions. The author accepts no responsibility for any losses incurred from the use of this indicator. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Built for traders who need to know not just where the market is going — but how much energy is behind the move.
Indicador Pine Script®
por AlphaX-Trade
2
AlphaEngine █ ALPHAENGINE v1.0 The Adaptive Consensus Trading Algorithm Self-optimizing signal engine that runs 6 independent "Expert" sub-systems simultaneously, tracks their real-time accuracy, and dynamically adjusts their influence using an Adaptive Consensus algorithm inspired by the Multiplicative Weight Update method. The result: an indicator that learns which strategies work best in the current market — and automatically amplifies them while suppressing underperformers. All in real-time, on every single bar. Free and Open Source. █ THE 6 EXPERTS 1. Trend Expert Triple EMA alignment (Fast/Mid/Slow) combined with ADX trend strength. Detects directional bias and amplifies signals when the trend is strong. 2. Momentum Expert Blends RSI zone analysis (40%), Stochastic crossover (30%), and Rate-of-Change velocity (30%) into a single momentum score. Catches acceleration and deceleration in price moves. 3. Volume Expert On-Balance Volume trend direction combined with real-time volume spike detection. Confirms signals with institutional participation. Volume must agree with price direction for full score. 4. Volatility Expert Bollinger Band position mapping combined with ATR expansion/contraction analysis. Includes Squeeze Detection that alerts before major breakout moves. 5. Supertrend Expert ATR-based dynamic support/resistance with distance scaling. Stronger signals when price is firmly above/below the supertrend line. 6. Structure Expert Higher-timeframe EMA bias using auto-selected HTF (e.g., 1H chart checks 4H, 5m chart checks 1H). Ensures signals align with the macro trend. █ THE ADAPTIVE WEIGHTING ENGINE Unlike traditional indicators that treat all components equally, AlphaEngine tracks which experts are actually performing well in the current market conditions: Each expert's predictions are validated against real price movement A rolling accuracy score (exponential decay) measures recent performance Weights are computed as accuracy squared — creating clear differentiation Experts with high accuracy get amplified, poor performers get dampened The engine adapts to any market environment automatically In a strong trending market, the Trend and Supertrend experts naturally gain weight. In a ranging/choppy market, Momentum and Volume experts take over. The engine adapts automatically. █ SIGNAL GRADING: A/B/C A-Grade (75%+ consensus) — High quality. Strong agreement among key experts. B-Grade (60%+ consensus) — Standard. Moderate agreement. Use with additional confirmation. C-Grade (50%+ consensus) — Weak. Minimal consensus. For analysis only. Filterable via settings. Signal labels are visual: A-grade signals are larger and prominent. B/C are smaller and subtle. A minimum grade filter lets you hide weaker signals. █ RISK MANAGEMENT Take Profit + Stop Loss: TP1 — ATR-based take profit target with visual line and hit detection SL — Dynamic ATR-based stop loss, adapts to current volatility Visual checkmark when TP1 is reached, X marker when SL triggers. Both levels are always proportional to market conditions — never fixed distances. █ VISUAL FEATURES Smart Candle Coloring — 6-level gradient from deep green to deep red based on consensus strength Trend Background — Subtle gradient overlay showing macro direction Volatility Bands — Dynamic Bollinger-based bands with squeeze highlight Squeeze Detection — Diamond dots below price when volatility contracts Supertrend Line — Color-coded dynamic support/resistance EMA Lines — Optional Fast/Mid/Slow EMA visualization █ DASHBOARD Compact 10-row real-time analytics panel: Current signal + grade + consensus %, visual consensus bar, each expert's direction + rolling accuracy %, and volatility state (Squeeze/Expand/Contract/Normal). █ ALERTS (7 CONDITIONS) Signal: Buy/Sell, A-Grade Buy/Sell Risk: TP1 Hit, SL Hit Volatility: Squeeze Start █ PRO VERSION The PRO version adds: VWAP Expert — 7th expert for institutional fair-value bias with timeframe auto-scaling Trading Style Presets — Auto/Scalping/Intraday/Swing/Position/Custom with automatic parameter tuning Asset Auto-Optimization — Crypto/Forex/Stocks/Futures multipliers for volatility and volume sensitivity RSI Divergence Detection — Regular + Hidden divergences with visual labels and connecting lines S-Grade Signals — Elite setup grade (90%+ consensus) for highest probability entries Multi-Target TP — TP1/TP2/TP3 system with sequential hit detection and R:R ratio display Premium Dashboard — 17-row analytics panel with all expert weights, divergence status, and TP tracking 17 Alert Conditions — Including divergence alerts, squeeze breakout, trend flip, and grade-specific triggers █ NON-REPAINTING All calculations use standard non-repainting indicators (EMA, RSI, ADX, ATR, OBV, Stochastic, Bollinger Bands). Multi-timeframe data uses confirmed prior-bar values. No repainting. █ WORKS ON Crypto, Forex, Stocks, Futures, Indices, Commodities and Bonds — any timeframe from 1 second to Monthly. █ DISCLAIMER This indicator is for educational and informational purposes only. It does not constitute financial advice. Past performance does not guarantee future results. No indicator can predict market movements with certainty. Always implement proper risk management. Use this tool as one component of a comprehensive trading strategy, not as a standalone decision-making system.
Indicador Pine Script®
por alphachart_tv
Self-Aware Trend System [WillyAlgoTrader]🧠 Self-Aware Trend System (SATS) is an adaptive SuperTrend-based trend-following system that continuously measures its own operating environment through a 4-factor Trend Quality Index (TQI) and modulates band width, asymmetry, and flip logic in real time. Unlike a fixed SuperTrend — which uses the same ATR multiplier forever — SATS knows when the market is trending vs. chopping, compresses bands in clean trends to lock profit tighter, widens them in noisy conditions to avoid whipsaws, and can detect regime collapse through a "character-flip" even when price hasn't broken the band yet. Each confirmed signal comes with a full trade plan (Entry, SL, TP1/TP2/TP3 at user-defined R multiples), and the system tracks its own realized R, win rate, drawdown, and per-regime edge — building an honest, instrument-specific performance log directly on your chart. The name "Self-Aware" refers to one specific property: the indicator measures the quality of its own environment every bar and feeds that measurement back into its band width and flip conditions. It doesn't predict the future — it reacts to present conditions with mathematically defined adaptation rules. 🧩 WHY THESE COMPONENTS WORK TOGETHER A classic SuperTrend has one problem: its ATR multiplier is fixed. In a clean trending market the bands are too wide, giving back profit on every pullback. In a choppy market the bands are too tight, generating whipsaw after whipsaw. Traders try to fix this by manually switching multipliers per timeframe or per instrument — but that's guesswork. SATS chains a different approach: Market state measurement (TQI) → Non-linear band modulation → Asymmetric band widths → Character-flip detection → R-multiple trade plan → Outcome tracking → Regime-aware statistics The TQI engine measures market quality from four independent angles each bar (efficiency, volatility regime, structure, momentum persistence). The non-linear modulation translates that quality into band width — high quality compresses bands, low quality expands them, using a power curve that avoids both over-reacting to mild fluctuations and under-reacting to severe regime changes. Asymmetric bands tighten the active side (in the direction of the trend) while loosening the passive side — creating a "ratchet with leverage" that locks in profit faster than it invalidates the trend. Character-flip detection catches regime collapses (high quality → low quality) even when price hasn't broken the band — critical for exiting stale trends before they fully reverse. And performance tracking records every signal's realized R, building a real statistical picture of how the system performs on your specific instrument and timeframe. Without TQI, the bands are blind. Without asymmetry, profit-taking lags. Without character-flip, exits happen too late. Without performance tracking, you have no idea if the system has a real edge on your instrument. All four work together — each layer addresses a specific weakness of classic SuperTrend. 🔍 WHAT MAKES IT ORIGINAL 1️⃣ Trend Quality Index (TQI) — 4-factor continuous quality measurement. TQI is computed every bar as a weighted combination of four independent 0..1 factors: — 🧭 Efficiency (default weight 0.35) : Kaufman Efficiency Ratio = |close − close | / sum(|close − close |). Measures directional movement vs. total path. 1.0 = perfect straight line, 0.0 = pure noise. Default window 20 bars. — 📊 Volatility Regime (weight 0.20) : uses Volume Z-score when volume data is available (z = (volume − sma) / stdev, mapped from to ), or falls back to ATR ratio (current ATR vs. long-baseline ATR) on volume-less instruments. — 🏗️ Structure (weight 0.25) : price position within its recent range. pricePos = (close − lowest) / (highest − lowest). Then tqiStruct = |pricePos − 0.5| × 2. Trends pin price to one edge (1.0), chop oscillates around the midpoint (0.0). No ATR dependency. — ⏩ Momentum Persistence (weight 0.20) : of the last N bars, what fraction moved in the same direction as the overall window change? alignedBars / N. Default 10 bars. Final TQI = (factor1 × w1 + factor2 × w2 + factor3 × w3 + factor4 × w4) / sum(weights), clamped to 0..1. Each weight is user-configurable. 2️⃣ Non-linear band modulation with power curve. Instead of a linear "multiplier × (1 − tqi)", SATS uses a power curve: qualityDeviation = (1 − tqi)^curvePower tqiMult = 1 − qStrength + qStrength × (0.6 + 0.8 × qualityDeviation) With curvePower = 1.5 (default), mild quality drops (from 0.9 to 0.7) cause small band expansion, but severe drops (0.5 to 0.2) cause rapid expansion. This matches how traders actually think: ignore small wobbles, react strongly to clear regime changes. 3️⃣ Asymmetric band widths — ratchet with leverage. In a strong uptrend, the lower band (active, trailing price up) tightens while the upper band (passive, not used as stop) widens: activeMult = symMult × (1 − asymStrength × tqi × 0.3) passiveMult = symMult × (1 + asymStrength × tqi × 0.4) Effect: as trend quality rises, the trailing stop moves closer to price (locking profit faster) while the opposite band moves away (so an accidental pullback doesn't trigger a flip). This is the "leverage" — asymmetric response to confirmed trend strength. 4️⃣ EMA-smoothed multipliers before ratchet application. Raw TQI can spike bar-to-bar. If those spikes fed directly into the SuperTrend ratchet logic, bands would compress at a high-TQI bar and stay stuck there (SuperTrend math never loosens active bands against the trend). SATS EMA-smooths the multipliers (alpha 0.15) before ratchet application — preventing stickiness. This is the critical fix that makes adaptive SuperTrend actually work in practice. 5️⃣ Efficiency-weighted ATR. Used for band construction and SL/TP sizing (not for TQI itself, to avoid circular feedback): effATR = rawATR × (0.5 + 0.5 × ER) Clean trending volatility counts full (ER = 1.0 → effATR = rawATR). Noisy chop volatility is halved (ER = 0.0 → effATR = 0.5 × rawATR). This makes SL/TP distances proportional to "useful" volatility, not total volatility. 6️⃣ Character-flip detection with age guard. Classic SuperTrend only flips on price breaks. But a trend can die internally — quality collapses, momentum fades — before price actually breaches the band. Character-flip catches this: charFlipDown = prevTQI > 0.55 (high) AND currentTQI < 0.25 (low) AND trendAge ≥ minAge AND close < source The age guard (default 5 bars) prevents whipsaw on fresh trends — a newborn trend hasn't had time to establish quality, so early TQI noise can't kill it. After the age threshold, a quality collapse triggers an immediate flip even without price break. 7️⃣ Auto-fixed TP order. If a user accidentally sets TP1 > TP2 (or TP3 < TP2), the indicator automatically sorts them. Math: fixedMin = min(all), fixedMax = max(all), middle = sum − min − max. The three TP lines always end up in correct order on the chart regardless of user input order. 8️⃣ R-multiple trade planning with pivot-anchored SL. On each signal: — Entry = close at bar of confirmed flip — SL = min(pivot − slMult×ATR, entry − slMult×ATR) for longs (mirror for shorts) — TP1/2/3 = entry ± risk × R-multiple The SL uses whichever is further from entry — the recent pivot (if available) or a pure ATR distance. This ensures the stop always has a minimum ATR buffer regardless of how close the nearest pivot is. 9️⃣ Performance tracking with realized R accounting. Every signal is tracked bar-by-bar for TP hits, SL hits, and timeout (default 100 bars). On close-out, realized R is calculated assuming 1/3 position per TP: — TP3 hit: realized = (tp1R + tp2R + tp3R) / 3 (all three filled) — SL hit after TP1: realized = (1/3) × tp1R + (2/3) × (−1R) — SL hit after TP1+TP2: realized = (1/3) × tp1R + (1/3) × tp2R + (1/3) × (−1R) — Pure SL: realized = −1R — Timeout: realized = sum of already-hit TP portions (no penalty) Results feed a rolling buffer (up to 100 signals), which drives: — Rolling Win Rate — Rolling Avg R — Rolling drawdown (window DD) — All-time drawdown — Current and max win/loss streaks 🔟 9-cell regime edge tracking. Every completed signal is bucketed by the market regime at entry time: Efficiency bin (low/mid/high) × Volatility bin (low/normal/high) = 3×3 = 9 cells. Each cell accumulates its own EWMA of realized R. The dashboard shows the current regime's historical edge — e.g., "Trending + High Vol: +0.85R (23 trades)". This lets you see which market conditions the system actually profits in. 1️⃣1️⃣ Experimental self-calibration (off by default). When enabled, the system monitors its rolling avg R and drifts the Quality Influence parameter toward the user default if recent edge is poor (below threshold). This is explicitly marked experimental — no claim of improved results — and recommended off until validated on your instrument. ⚙️ HOW IT WORKS — CALCULATION FLOW Step 1 — TQI computation : Compute four factors (Efficiency, Volatility Regime, Structure, Momentum Persistence). Weight and combine into a single 0..1 value. Step 2 — ATR and effective ATR : rawATR = ta.atr(len). effATR = rawATR × (0.5 + 0.5 × ER). Step 3 — Adaptive multiplier : Apply legacy ER adaptation (optional) and non-linear TQI curve. If asymmetric bands enabled, split into active/passive multipliers. Step 4 — EMA smoothing : Smooth both multipliers with alpha 0.15 to prevent ratchet stickiness. Step 5 — SuperTrend bands : upperBand = source + upperMult × effATR. lowerBand = source − lowerMult × effATR. Ratchet logic: lower only rises, upper only falls, until a flip. Step 6 — Flip detection : Price flip (close crosses opposite band) OR character-flip (TQI collapse + age guard). On flip: reset trend age, start new segment. Step 7 — Trade plan : On confirmed flip, compute Entry/SL/TP1/TP2/TP3. Draw lines and labels. Cache the market regime (ER bin × Vol bin) for later edge attribution. Step 8 — Outcome tracking : Each bar, check active trade for TP1/TP2/TP3/SL hits and timeout. On close-out, calculate realized R, push to history buffer, update rolling stats, drawdown, streaks, and regime cell. Step 9 — Dashboard render : On last bar, render live state (Trend, TQI, regime, performance stats, TQI breakdown, regime edge). 📖 HOW TO USE 🎯 Quick start: 1. Add indicator — preset is "Auto" (adapts to your current timeframe) 2. Green line = bullish trend, red = bearish trend 3. Line transparency reflects TQI: bright = high quality, faded = low quality 4. ▲ BUY / ▼ SELL labels appear on confirmed flips 5. Entry, SL, TP1, TP2, TP3 lines drawn automatically at the signal 6. Copy levels to your exchange, let the dashboard track outcomes 👁️ Reading the chart: — 🟢 Bright green line = bullish trend with high TQI — aggressive participation — 🟢 Faded green line = bullish trend with low TQI — cautious, possible regime shift — 🔴 Bright red line = bearish trend with high TQI — 🔴 Faded red line = bearish trend with low TQI — Line flip + label = new trade signal — Dashed TP lines turning solid + "✓" = TP was hit — Score on label (e.g., "85/102") = multi-factor confluence strength 📊 Dashboard fields: — Preset: Auto-resolved (Scalping / Default / Swing / Crypto) — Trend: Bullish ▲ / Bearish ▼ — TQI: current quality index (0..1) — Q.Strength: effective Quality Influence (may drift if auto-calibration enabled) — Signal: current bar signal (BUY / SELL / —) — Regime: Trending / Mixed / Choppy + Low/Norm/High Vol — ER / RSI / Vol Z: raw filter values — TQI Components breakdown: Efficiency / Volatility / Structure / Momentum (each 0..1) — Performance section: Win Rate, Avg R, Window DD, All-Time DD, Streak W/L, Regime Edge 🔧 Tuning guide: — Too many whipsaws : increase Quality Influence (0.5–0.7), increase Structure weight, increase Base Band Width — Missing moves / signals too late : decrease Quality Influence (0.2–0.3), decrease Base Band Width, increase asymmetry — Choppy instrument : use Swing preset, enable Character-Flip, raise minAge to 10+ — Strong trending instrument : use Scalping preset, enable Asymmetric Bands with strength 0.6+ — No volume data : automatically falls back to ATR ratio for volatility regime — no action needed ⚙️ KEY SETTINGS REFERENCE ⚙️ Main: — Preset : Auto / Custom / Scalping / Default / Swing / Crypto 24/7 (auto-adapts ATR, band width, ER window, RSI, SL multiplier) — ATR Length (13), Base Band Width (2.0 × ATR) 📐 Trend Quality Engine: — Enable TQI (default On) — Quality Influence (0.4): how strongly TQI compresses/expands bands — Quality Curve Power (1.5): non-linearity — Smooth Adaptive Multipliers (On): critical fix for ratchet stickiness — Asymmetric Bands (On) + Asymmetry Strength (0.5) — Efficiency-Weighted ATR (On) — Character-Flip (On) + Min Age (5) + High/Low TQI thresholds (0.55 / 0.25) — TQI factor weights : ER 0.35, Volatility 0.20, Structure 0.25, Momentum 0.20 🎯 Risk: — SL Buffer (1.5 × ATR), TP1/2/3 R-multiples (1.0 / 2.0 / 3.0), Trade Timeout (100 bars) 🤖 Self-Learning (experimental): — Auto-calibration (default Off), calibration window, bad/good R thresholds, quality step, cooldown, floor/ceiling — Reset Learning Memory button 📊 Dashboard: position, TQI breakdown toggle, performance stats toggle, score breakdown toggle 🔔 Alerts — 🟢 BUY — ticker, TF, price, TQI, score, SL, TP1, TP2, TP3 — 🔴 SELL — same payload Plain text and JSON webhook formats supported. Bar-close confirmed. ⚠️ IMPORTANT NOTES — 🚫 No repainting. All signals require barstate.isconfirmed. SuperTrend ratchet logic is monotonic — once the trailing band moves, it cannot move back against the trend until a flip. Character-flip uses only previous-bar TQI and current-bar close, both available at bar close. — 📊 TQI is descriptive, not predictive. It measures current market quality from 4 factors — it does not forecast future price. A high TQI reading means "the market is currently behaving like a trend" — it can still fail on the next bar. — 📏 Performance stats are walk-forward, not backtested. The rolling buffer records signals as they happen, bar by bar. Drawdown, win rate, and regime edge are honest forward-looking statistics on your specific instrument and timeframe — not curve-fitted optimization results. — ⚖️ The realized R accounting assumes 1/3 position per TP . This mirrors a standard "scale out at each target" approach. Traders who hold full position to a single target should interpret the R values accordingly. — 🔄 Auto-calibration is experimental. It's off by default and should stay off until you've validated it on your specific instrument. The drift is mean-reverting (toward your user default), not profit-maximizing — no claim of improvement is made. — 🔒 The Reset Learning Memory button clears the rolling buffer, regime cells, drawdown, and streak stats. Use when changing instruments or after significant market regime shifts. — 🛠️ SATS is a decision-support and trade-planning tool , not an automated bot. It identifies trend conditions, measures environmental quality, provides structured trade plans with R-based targets, and tracks outcomes — trade decisions and execution remain yours. — 🌐 Works on all markets and timeframes. Volume-dependent features (Volume Z in TQI) auto-fall-back to ATR-based measurement when volume data is unavailable.
Indicador Pine Script®
por WillyAlgoTrader
58
AG Pro Engulfing Candle Quality [AGPro Series]AG Pro Engulfing Candle Quality Overview / What it does AG Pro Engulfing Candle Quality is a price action overlay designed to detect bullish and bearish engulfing candles and then grade them through a structured quality framework instead of treating every engulfing event as equally important. Rather than marking all engulfing candles with the same visual weight, this script evaluates whether the candle shows characteristics that may make the event more meaningful in context. The goal is to reduce low-value pattern noise and help the user focus on engulfing candles that display stronger internal structure and better surrounding conditions. The script can color qualifying candles, display score labels directly on the chart, add optional background emphasis, and summarize recent signal state through an information panel. This makes it suitable for traders who want a cleaner way to review engulfing behavior without turning the chart into a generic pattern map. In practical use, the script is not intended to predict direction on its own. It is designed as a filtering and chart-reading aid for users who already work with structure, liquidity, support/resistance, trend context, or discretionary execution rules. Unique Edge Many engulfing tools stop at pattern detection. This script takes a different approach by treating engulfing candles as a quality event rather than a binary event. Its core difference is the scoring model. Each qualifying candle is evaluated through a multi-factor framework that can include relative volume behavior, body-to-range efficiency, prior directional context, engulf strength, and optional support/resistance proximity. This creates a 1-10 quality score that helps separate weaker engulfing events from stronger ones. The result is a more selective workflow: - detect the pattern, - evaluate the candle quality, - display only the events that meet the user’s threshold, - and keep the chart focused on higher-interest formations. This makes the script different from simple engulfing markers, basic candlestick libraries, or broad pattern collections. Its purpose is not to label everything. Its purpose is to rank and filter. Methodology The script identifies bullish and bearish engulfing conditions using configurable detection logic. Users can choose a stricter close-based interpretation or a broader wick-based interpretation depending on how selective they want the pattern engine to be. Once an engulfing candle is detected, the script evaluates the event with a weighted quality framework. The conceptual components include: 1. Relative volume The candle is compared against a moving average of volume. A candle that forms with stronger-than-normal participation can receive a higher quality contribution than one forming on ordinary or weak activity. 2. Body efficiency The candle body is evaluated relative to the full range. A larger, more decisive body may indicate stronger commitment than a candle with excessive wick noise and a relatively small real body. 3. Prior directional context The script reviews recent directional pressure over a user-defined lookback window. This helps distinguish engulfing candles that appear after a more meaningful opposing move from those that form in flatter or less informative conditions. 4. Engulf strength The script can incorporate how convincingly the current candle overtakes the prior candle structure, adding another layer beyond simple pattern recognition. 5. Optional support/resistance proximity Users can enable an additional contextual bonus when the engulfing event forms near pivot-derived support or resistance areas. These components are normalized into a score from 1 to 10. The score is then used for chart display, filtering, and alerts. This means the script is not simply asking whether an engulfing candle exists. It is asking whether the engulfing candle appears to have enough internal and contextual quality to deserve attention. Signals & Alerts The script can display: - bullish engulfing events, - bearish engulfing events, - candle coloring for qualified signals, - optional score labels, - optional background highlights, - and a chart panel summarizing recent signal state. Alerts are deterministic and based on confirmed rule conditions inside the script. Users can create alerts for: - bullish engulfing events, - bearish engulfing events, - high-quality bullish engulfing events, - high-quality bearish engulfing events, - or any engulfing event that meets the selected minimum score threshold. As with any chart tool, users should understand that alerts reflect the script’s rules, not an outcome guarantee. An alert means the selected condition has been satisfied according to the methodology. It does not imply that the next market move will be favorable. Key Inputs The script includes several controls so users can adapt the tool to different symbols and timeframes. Important inputs include: - minimum score required for display, - label cooldown to reduce visual clustering, - trend-strength lookback, - strict close-based or broader wick-based engulf logic, - bullish and bearish visibility toggles, - optional support/resistance bonus, - support/resistance pivot length, - ATR-based proximity setting, - scoring weights for volume, body efficiency, trend context, and engulf strength, - volume average threshold, - body/range threshold, - color controls for bullish, bearish, and score states, - label size, - background highlight toggle, - candle-coloring toggle, - score label visibility, - panel visibility, position, font size, and theme, - and minimum score required for alerts. These inputs allow the user to keep the script conservative and selective, or make it more permissive when reviewing more active charts. Limitations & Transparency This script is a rule-based visual analysis tool. It does not know future price action, and it does not confirm trade quality on its own. Several points are important: - An engulfing candle is still a local pattern. It can fail, especially in noisy or low-liquidity environments. - Strong scores do not guarantee continuation or reversal. - The support/resistance context is approximate and derived from pivot logic, not from a universal market map. - Volume behavior can vary across markets and data feeds. - Different timeframes can produce very different signal density and quality distribution. - The script is designed for confirmation and filtering, not for fully automated decision-making. Users should treat the score as a structured quality estimate, not as a promise. In many workflows, the script is most useful when combined with broader context such as market structure, trend bias, higher-timeframe levels, session behavior, or risk management rules. Risk Disclosure This script is provided for chart analysis and educational use. It is not financial advice, not an execution system, and not a guarantee of performance. All trading and investing involve risk. Market conditions can change quickly, and any pattern, score, or alert can fail. Users are responsible for their own analysis, entries, exits, and risk controls. Use the script as a decision-support tool, not as a substitute for judgment.
Indicador Pine Script®
por AGProLabs
2
[ A L P H A X ] Institutional Confluence Suite Institutional Confluence Suite — Volume Profile · Order Blocks · FVG · MTF Matrix · Flow Analysis · Smart Signals The AlphaX Institutional Confluence Suite is a professional-grade multi-layer analysis system built around one core principle: no single tool gives you an edge — confluence does . This indicator fuses six independent institutional analysis engines into a unified real-time dashboard, scoring each bar from 0 to 100 and surfacing only the setups where everything lines up. Designed to be used alongside AlphaX PRIME for the highest-probability entries in the AlphaX ecosystem. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📸 What You See On The Chart POC line — bright yellow-green horizontal line at the highest-volume price of the lookback range Value Area fill — soft green shaded zone between VAH and VAL (68% of volume) HVN box — highlighted rectangle at the most significant high-volume node Order Block lines — dashed orange (bullish) and red (bearish) lines marking institutional order zones FVG boxes — translucent green (bullish) and red (bearish) rectangles where price left imbalance gaps Liquidity Sweep triangles — small triangles marking stop hunts above swing highs or below swing lows BOS dots — tiny circles marking confirmed breaks of market structure Signal triangles — sized by tier (S / A / B), colored by direction — pure triangle up for bull, triangle down for bear. No text, no clutter. Confluence Dashboard — real-time panel showing every engine's status, individual scores, bias direction, and final tier rating ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔬 The Six Engines — How Each One Works ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1 ─ Volume Profile (VPVR) — Where Is The Real Money? The Volume Profile calculates exactly how much volume traded at every price level across your configured lookback window. This is the same tool institutional desks use to identify where liquidity has accumulated. Point of Control (POC) — the single price level with the highest traded volume. Price is magnetically drawn to the POC and tends to reverse or consolidate around it. Trading at the POC means you are operating at the most contested price in the range. Value Area High / Low (VAH / VAL) — the price band containing 68% of all volume. Prices inside the value area are "fair" to the market. Prices outside it are either discounts (below VAL) or premiums (above VAH) — and both tend to revert. High Volume Node (HVN) — the densest cluster of volume outside the POC. HVNs act as strong support and resistance because large orders were filled there. When price approaches an HVN, expect slower movement and potential reversal. Scoring contribution: up to 20 points Full 20 points when price is within 0.5% of the POC. Scaled down with distance. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2 ─ Order Blocks — Institutional Footprints Order Blocks are the last candle before a strong impulsive move — the candle where an institution placed a large directional order. When price returns to that zone, the institution defends its position, creating a high-probability reaction. Bullish Order Block — a bearish candle immediately followed by a strong bullish breakout. The low of that bearish candle is where buy orders were placed. When price returns to this zone, look for long entries. Bearish Order Block — a bullish candle immediately followed by a strong bearish breakdown. The high of that bullish candle is where sell orders were placed. When price returns, look for short entries. Strength Rating — each OB is scored by the momentum of the move that followed it. Higher strength = more institutional conviction = stronger expected reaction on revisit. IN ZONE ✓ — the dashboard highlights when price is currently inside an active order block, making the setup immediately actionable. Scoring contribution: up to 20 points Full 20 points when price is inside the OB zone. Scaled by proximity. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3 ─ Fair Value Gaps (FVG) — Price Imbalance Zones A Fair Value Gap is created when price moves so fast that no two-sided trading occurs — leaving a "gap" in the market that price statistically tends to return and fill. FVGs are one of the most powerful short-term magnets in price action analysis. Bullish FVG — the low of candle N+2 is above the high of candle N, leaving an unfilled zone below current price. Price tends to pull back into this gap before continuing higher. Bearish FVG — the high of candle N+2 is below the low of candle N, leaving an unfilled zone above current price. Price tends to rally into this gap before continuing lower. Only unfilled FVGs are displayed — the indicator automatically removes gaps once price has traded through them. A minimum size filter (configurable as an ATR multiple) prevents tiny, insignificant gaps from cluttering the chart. Dashboard contribution: FVG count display (Bull/Bear active gaps) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4 ─ Liquidity Sweeps — Stop Hunts & Reversals Liquidity Sweeps occur when price briefly breaks a key swing high or low — triggering stop losses clustered there — before immediately reversing. This is the market's most reliable short-term reversal pattern because it is driven by mechanics, not sentiment. Bullish Sweep — price dips below a recent swing low (triggering stops), then closes back above it. The stops have been hunted. Price is now positioned to move higher with less resistance. Bearish Sweep — price briefly spikes above a recent swing high (triggering stops), then closes back below it. The squeeze is complete. Sweeps appear as small triangles on the chart and also feed into the signal generation logic — a sweep in the direction of overall confluence is one of the strongest entry triggers available. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 5 ─ Multi-Timeframe Confluence Matrix — Are All Timeframes Aligned? The MTF Matrix queries six timeframes simultaneously — M1, M5, M15, H1, H4, and D1 — and evaluates price position relative to both the 50 EMA and 200 EMA on each. Higher timeframes are weighted more heavily because they represent more significant institutional positioning. Each timeframe receives a directional score based on whether price is above or below its EMAs The 200 EMA carries 1.5× the weight of the 50 EMA — macro structure matters more than short-term positioning Higher timeframes (H4, D1) carry 3–4× the weight of lower timeframes (M1, M5) The aggregate score is expressed as a percentage from −100% (fully bearish) to +100% (fully bullish) The dashboard shows each timeframe's arrow (▲ / ▼ / —) so you can instantly see where alignment breaks down Scoring contribution: up to 20 points Full 20 points when MTF alignment matches the price-POC relationship (e.g., fully bullish AND price is above POC). ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 6 ─ Institutional Flow — Volume Delta & Divergence The Flow engine estimates the directional bias of volume on each bar using the close position within the bar's range — a proxy for buy-side vs. sell-side pressure. This is then smoothed to produce a clean directional flow signal and tracked for divergence against price. Bullish Flow — smoothed delta is positive and rising. Buyers are in control of order flow. Bearish Flow — smoothed delta is negative and falling. Sellers are dominating. Bullish Divergence — price makes a lower low but flow makes a higher low. Sellers are losing conviction on the new lows — a bullish reversal is building. Bearish Divergence — price makes a higher high but flow makes a lower high. Buyers are losing steam at the new highs — a bearish reversal is building. Divergence signals are highlighted with a ⚠ warning in the dashboard and receive bonus points in the confluence score. Scoring contribution: up to 20 points ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 7 ─ Market Structure — BOS & CHoCH The Market Structure engine tracks the sequence of swing highs and swing lows to determine whether the market is in a bullish or bearish structural trend, and detects when that structure breaks. Break of Structure (BOS) — a confirmed break of the most recent swing high (bullish BOS) or swing low (bearish BOS) in the direction of the existing trend. This confirms trend continuation. Change of Character (CHoCH) — a BOS that occurs against the current trend direction, signaling a potential trend reversal. The market has changed its behavior. Structure trend (bullish / bearish / undefined) is displayed in the dashboard and contributes to both the confluence score and the directional bias vote. Scoring contribution: up to 20 points ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🧠 Confluence Scoring System — 0 to 100 Every bar is scored in real time by summing contributions from all six engines: Volume Profile (POC proximity) — up to 20 points Order Block (zone proximity) — up to 20 points MTF Alignment — up to 20 points Institutional Flow — up to 20 points Market Structure — up to 20 points Score Tiers: S-TIER PRIME (80–100) — All or nearly all engines aligned. The highest probability setup available. Strong entry zone. Large triangle marker on chart. A-TIER HIGH (65–79) — Most engines aligned with minor divergence. High quality setup. Medium triangle. B-TIER MODERATE (50–64) — Partial alignment. Acceptable for experienced traders, prefer to wait for improvement. Small triangle. C-TIER WEAK (30–49) — Insufficient alignment. No signal fires. Wait for confluence to build. NO SETUP (0–29) — Do not trade. Multiple engines are contradicting each other. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📊 Signal Generation — When Does A Triangle Appear? Signals require ALL of the following to be true simultaneously: Confluence score meets or exceeds your configured minimum (default: 60/100) Directional bias vote is clear — majority of engines agree on direction (MTF, flow, structure, divergence all cast votes) A trigger event fires — either a Liquidity Sweep in the signal direction, OR a Break of Structure + bullish/bearish flow confirmation Signal cooldown has elapsed — prevents repeated signals on consecutive bars This means triangles are rare and meaningful — not every bar. When one appears, every major confluence factor has agreed on the same direction at the same time. Triangle size = tier: Large triangle = S-Tier (score ≥ 80) — highest conviction Medium triangle = A-Tier (score ≥ 65) — strong setup Small triangle = B-Tier (score ≥ 50 but < 65) — moderate setup ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🚀 How To Trade — Step By Step Step 1 — Check The Dashboard For Context Open the dashboard panel. Read the OVERALL MTF alignment first — are all timeframes pointing the same direction? Check the SIGNAL BIAS row — is the directional vote clear or split? Check the SCORE — are you at B-Tier or better? If the score is below 50, no signal will fire and you should wait. Step 2 — Identify The Key Level Is price near the POC? Near the VAH or VAL? Inside an Order Block? Near an unfilled FVG? The more of these levels that overlap at the same price, the stronger the potential reaction zone. The ideal setup is price approaching a POC + OB overlap from the correct direction. Step 3 — Wait For The Trigger Watch for a Liquidity Sweep triangle (small triangle from the sweep engine) at or near your identified level. Or watch for a BOS dot confirming that structure has broken in your direction. Either of these is the "ignition" event that tells you momentum has shifted. Step 4 — Enter On The Signal Triangle When a large (S-Tier) or medium (A-Tier) signal triangle appears, this is your primary entry. The triangle has already confirmed: score threshold met, bias agreed, trigger fired, cooldown clear. Enter in the direction of the triangle. For bullish triangles (▲), go long. For bearish triangles (▼), go short. Step 5 — Place Your Stop Loss For long entries: stop below the Order Block low, or below the VAL, whichever is closer. For short entries: stop above the Order Block high, or above the VAH. Use the FVG zones as your first take-profit target — price tends to fill gaps before continuing. Step 6 — Manage The Trade Watch the dashboard for any shift in the SIGNAL BIAS or a sudden drop in confluence score. If the score drops below 40 during your trade, consider reducing position or tightening your stop. If an opposing signal triangle appears, close the trade — the confluence has flipped direction. Step 7 — Know When NOT To Trade Score below 50: no setup — wait. MTF matrix showing mixed signals (some ▲, some ▼ across timeframes): market is indecisive — wait. SIGNAL BIAS showing "— NEUTRAL": the engines disagree on direction — wait. No active OB detected and price is far from POC: no institutional level nearby — wait. FVG shows active gaps above AND below price: the market is caught between two magnets — wait. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🛡 Used As A Filter — Pairing With AlphaX PRIME The Confluence Suite is designed to work alongside AlphaX PRIME as a two-layer system: PRIME generates precise entry triggers — the timing layer CONFLUENCE provides the context and quality filter — the intelligence layer The three rules: PRIME signal + S or A-Tier confluence = take the trade at full size PRIME signal + B-Tier confluence = reduce size or wait for score to improve High confluence zone + no PRIME signal yet = pre-position alert — watch for PRIME to trigger PRIME signal + score below 50 = skip — confluence does not support the entry This pairing eliminates the two biggest trading mistakes: entering good signals at bad locations, and entering bad signals at good locations. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚡ Key Features 📊 Live Volume Profile (VPVR) with POC, Value Area (VAH/VAL), and High Volume Node detection 🟧 Institutional Order Block detection with strength scoring and zone proximity alerts ⬜ Fair Value Gap detection with automatic fill tracking — only unfilled gaps displayed 🌊 Liquidity Sweep detection — identifies stop hunts at swing highs and lows 🔢 Six-timeframe MTF matrix (M1 / M5 / M15 / H1 / H4 / D1) with dual-EMA scoring and higher-TF weighting 📈 Institutional Flow engine — volume delta proxy with divergence detection 🏗 Market Structure tracking — BOS and CHoCH with trend state memory 🧠 Real-time confluence scoring (0–100) across all engines simultaneously 🎯 S / A / B tier signal system — triangle size reflects setup quality 📋 Directional bias vote — majority-rules engine agreement required for signal ⏱ Configurable signal cooldown — prevents consecutive duplicate signals 🔔 Tier-based alerts — S / A / B tier bull and bear alerts fire independently for custom notification routing 🎨 Full AlphaX color theme — yellow-green for bullish, red for bearish, amber for caution, gray for neutral ⚙ Fully configurable — every engine can be independently enabled or disabled ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚙ Settings Reference Volume Profile Enable Volume Profile — master toggle Visible Range Lookback — number of bars used to build the profile (default: 100) Profile Rows — price resolution of the profile (default: 24) Show POC / Value Area / HVN — individual visibility toggles Value Area % — percentage of volume defining the value area (default: 68%) Order Blocks Enable Order Block Detection — master toggle OB Lookback Period — bars to scan for order block candles (default: 20) Show Bullish / Bearish OB — individual direction toggles OB Extend Bars — how far right the OB lines extend (default: 20) Fair Value Gaps Enable FVG Detection — master toggle FVG Min Size (ATR multiple) — minimum gap size to qualify (default: 0.3× ATR) FVG Extend Bars — how far right boxes extend (default: 30) Show Bullish / Bearish FVG — individual direction toggles Liquidity Sweeps Enable Liquidity Sweep Detection — master toggle Swing Lookback — pivot lookback for identifying swing highs/lows (default: 20) Sweep Threshold — sensitivity for detecting the sweep and close-back (default: 0.5 ticks) MTF Confluence Matrix Enable MTF Matrix — master toggle Include M1 / M5 / M15 / H1 / H4 / D1 — individual timeframe toggles Institutional Flow Enable Flow Analysis — master toggle Flow Period — EMA period for delta smoothing (default: 14) Flow Smoothing — SMA period applied after EMA (default: 3) Market Structure Enable Market Structure — master toggle Structure Lookback — bars used for swing detection context (default: 50) Signals Enable Signal Markers — master toggle for triangle plotting Min Confluence Score to Plot — minimum score required for a triangle to appear (default: 60) Signal Cooldown (bars) — minimum bars between consecutive signals (default: 3) Dashboard Show Confluence Dashboard — master toggle Dashboard Position — Top Right / Top Left / Bottom Right / Bottom Left Compact Mode — hides secondary rows for a smaller panel footprint ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔔 Alert Conditions S-Tier Bull Signal — highest quality bullish confluence (score ≥ 80) A-Tier Bull Signal — strong bullish confluence (score 65–79) B-Tier Bull Signal — moderate bullish confluence (score 50–64) S-Tier Bear Signal — highest quality bearish confluence (score ≥ 80) A-Tier Bear Signal — strong bearish confluence (score 65–79) B-Tier Bear Signal — moderate bearish confluence (score 50–64) Any Confluence Signal — fires on any bull or bear signal regardless of tier Bullish Liquidity Sweep — stop hunt below swing low with close-back above Bearish Liquidity Sweep — stop hunt above swing high with close-back below Bullish BOS — break of structure to the upside Bearish BOS — break of structure to the downside Bullish Flow Divergence — price lower low with flow higher low Bearish Flow Divergence — price higher high with flow lower high Prime Setup Detected — fires when score crosses above 80 for the first time All alert messages include {{ticker}} and {{interval}} placeholders for webhook integration. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🎯 Recommended Settings By Instrument XAUUSD (Gold) — 1m / 5m Lookback: 100, Rows: 24, Min Score: 60, Cooldown: 3 All engines enabled, MTF full 6-timeframe Forex Majors — 5m / 15m Lookback: 80, Min Score: 55, Cooldown: 5 Disable M1 from MTF matrix for cleaner readings Indices (NAS100, US30) — 1m / 5m Lookback: 120, Rows: 30, Min Score: 65 Increase OB lookback to 30 for index session structure Higher Timeframes (H1 / H4) Lookback: 200, Rows: 36, Min Score: 70, Cooldown: 2 Disable M1 and M5 from MTF matrix ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 👥 Who This Is For 🥇 Institutional-style traders — traders who already understand order flow, volume profile, and smart money concepts will find this system speaks their language natively 📊 Multi-timeframe traders — the MTF matrix makes top-down analysis automatic and quantified 🎯 Precision entry traders — the six-engine confluence requirement means signals are rare but high-quality 🧠 Systematic traders — the scoring system removes subjectivity and gives every setup a quantitative rating 📈 Trend and momentum traders — the structure and flow engines confirm that momentum supports the direction before a signal fires ⚠ Traders who struggle with overtrading — the minimum score requirement and cooldown mechanically prevent low-quality entries from appearing 🔗 AlphaX PRIME users — this indicator is the official confluence layer designed to work alongside PRIME as a complete two-part system ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📝 Notes All signals are generated on bar close — no repainting The Volume Profile recalculates on the final bar of each lookback window — on lower timeframes with many bars, allow a moment for the profile to initialize Order Block detection resets each bar and only draws levels within 5% of current price — this prevents stale OBs from causing chart zoom-out on instruments with large historical price ranges FVG boxes are automatically cleaned and redrawn each bar — only the most recent unfilled gap in each direction is displayed to avoid clutter MTF data uses barmerge.lookahead_off — no future data is used in any calculation Maximum 500 labels, lines, and boxes are maintained — on very long chart histories, oldest drawings are automatically removed by TradingView's limits ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠ Disclaimer This indicator is a technical analysis and visualization tool intended for educational and informational purposes only. It does not constitute financial advice or a recommendation to buy or sell any financial instrument. All signals are generated from historical and real-time price data using mathematical calculations — their accuracy or profitability is not guaranteed. Past performance of any signal type does not guarantee future results. Always conduct your own analysis, use proper risk management, and consult a licensed financial advisor before making any trading decisions. The author accepts no responsibility for any losses incurred from the use of this indicator. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Six engines. One score. Only the best setups make it through.
Indicador Pine Script®
por AlphaX-Trade
4
[ A L P H A X ] Prism Price Action Institutional FlowAlphaX Prism — Price Action × Key Levels × Institutional Flow | Confluence Engine, Smart Entry/Exit Signals & Multi-Factor Confidence Scoring AlphaX Prism is a professional-grade price action and confluence trading system that fuses three powerful analytical dimensions into a single, cohesive overlay indicator: automatic Key Level detection, real-time Price Action pattern recognition, and Institutional Footprint tracking. Every signal is governed by a 10-factor confluence scoring engine and a weighted confidence percentage system — so only high-quality, structurally valid setups reach your chart. Designed for traders who want clean, context-aware signals rooted in market structure rather than lagging oscillators. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔬 The Three Pillars of AlphaX Prism AlphaX Prism operates across three simultaneous analytical layers, each feeding into the central confluence engine: I. Key Level Engine — Automatic Support & Resistance Detection The Key Level engine automatically identifies, tracks, and manages the most significant support and resistance zones on your chart using swing pivot detection. Rather than drawing static lines, AlphaX Prism builds intelligent zones that evolve as price interacts with them. How the Key Level engine works: Swing Pivot Detection — identifies significant highs and lows using a configurable swing length parameter Zone Merging — nearby levels within a configurable ATR-based threshold are merged into a single consolidated zone, preventing level clutter Touch Counting — each zone tracks how many times price has interacted with it. Zones below the minimum touch threshold appear in neutral gray; confirmed zones flip to color-coded support (yellow-green) or resistance (red) Zone Age Management — zones older than a configurable bar count are automatically retired and removed, keeping your chart focused on relevant levels only Dynamic Extension — all zones and lines extend to the right edge of the chart in real time Key Level signals feed directly into the confluence engine and generate specific condition flags: Price at Support — price is currently trading within a confirmed support zone Price at Resistance — price is currently trading within a confirmed resistance zone Bounce from Support — price touched support and closed bullish with a meaningful body — the highest-value condition for long setups Rejection from Resistance — price touched resistance and closed bearish with a meaningful body — the highest-value condition for short setups ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ II. Price Action Pattern Engine — What the Candles Are Saying AlphaX Prism recognizes five core price action patterns in real time, each validated with additional filters to reduce false triggers: Bullish / Bearish Engulfing A bullish candle that fully engulfs the prior bearish candle (or vice versa), with a meaningful body ratio and a candle range above a minimum ATR threshold. Engulfing patterns receive the highest PA score in the confluence engine and trigger a dedicated marker on the chart when occurring at a key level or in the direction of the established trend. Bullish / Bearish Pin Bar A candle with a wick at least 2.5× the body length, where the wick is significantly larger than the opposing wick, and the close is in the upper or lower half of the candle's range respectively. The candle must meet a minimum ATR size threshold to qualify. Inside Bar Breakout When a candle is fully contained within the prior candle's range (inside bar), the next candle breaking out above or below that range — with a directional close and a meaningful body — triggers an inside bar breakout marker. A controllable toggle allows you to enable or disable this pattern type independently. Momentum Shift (3-Bar Reversal) Two consecutive candles in one direction followed by a third candle that breaks the prior candle's extreme and closes with a body ratio above 0.5. This pattern captures short-term momentum reversals within the context of a broader structure. Strong Directional Candle A candle with a body ratio above 0.65 and a body size exceeding the average body — used as a supplementary structural signal within the confluence engine. Pattern markers are context-filtered — they only appear when occurring at a key level, aligned with the trend structure, or accompanied by a bounce/rejection confirmation. This eliminates random pattern signals in the middle of nowhere. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ III. Institutional Footprint — Tracking Large Money Flow Retail price action alone does not tell the full story. AlphaX Prism tracks two types of institutional activity that are invisible to most traders: Institutional Candles — Directional Large-Body Moves A bullish or bearish candle whose body exceeds the 20-bar average body by a configurable multiplier (default: 1.8×) Volume exceeds the moving average by a configurable multiplier (default: 1.3×) Body ratio above 0.55, with a close in the upper or lower third of the range — confirming directional conviction These appear as bright colored dots at the bottom of the chart (yellow-green for bull, red for bear) Absorption Candles — Hidden Accumulation and Distribution A large wick (more than 2× the body) with high volume — indicating large orders absorbing supply or demand without a visible directional body The wick must be at least 1.5× larger than the opposing wick, and the candle range must exceed the ATR minimum These appear as dimmer dots at the bottom of the chart — subtler activity, but often a precursor to a directional move Volume Spikes — when high volume occurs without an institutional candle pattern, a neutral gray dot appears — flagging elevated participation without clear directional conviction. Institutional activity feeds into the confluence engine and acts as a significant signal amplifier when aligned with price action and key levels. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📊 Two Signal Layers AlphaX Prism produces two distinct signal types, each serving a specific role in the trade lifecycle: 1 ─ Entry Signals (▲ / ▼) Entry signals are generated when the confluence engine determines that enough independent factors are aligned simultaneously. A bullish entry (▲) or bearish entry (▼) label appears offset from the bar with a dotted connector line for visual clarity. Entry signals require ALL of the following to fire: Confluence score meets or exceeds the minimum threshold (default: 4 out of 10 factors) A qualifying Price Action pattern is present A structural reason exists (key level, institutional candle, or trend context) The candle is clean — not overextended, not at an RSI extreme, and with a meaningful body ADX confirms a trending environment (not a ranging, directionless market) Signal cooldown has elapsed since the last signal When both bull and bear conditions trigger simultaneously, the higher-confluence side wins. If scores are equal, no signal fires — tie goes to caution. 2 ─ Exit Signals (✕) Exit signals fire after an entry signal has been established and a reversal condition develops. They are filtered by the same cooldown as entries to prevent rapid oscillation. Long Exit — price reaches a resistance zone and a bearish engulfing forms, or the trend shifts down with price below the medium EMA and MACD bearish, or an institutional selling candle closes below the fast EMA, or RSI is overbought with a bearish pattern Short Exit — the inverse of the above conditions for a long exit Exit signals indicate that the momentum behind the current trade is deteriorating. Use them to take partial or full profit, or to tighten your stop loss ahead of a potential reversal. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🧠 10-Factor Confluence Scoring System Every bar is evaluated against ten independent confluence factors — each one a separate reason to consider a trade. Only setups where enough factors align simultaneously are displayed. The 10 Confluence Factors: 1. Key Level — price is bouncing from support or rejecting resistance (highest weight) 2. Price Action Pattern — any qualifying PA pattern is present 3. Strong Pattern Bonus — engulfing or momentum shift (higher-conviction PA types) 4. Institutional Activity — institutional candle or absorption present in signal direction 5. Trend Structure — swing-based trend direction (HH/HL or LL/LH) aligns with signal 6. MACD Momentum — MACD line above/below signal line and histogram expanding in signal direction 7. RSI Alignment — RSI slope rising/falling within the mid-range zone (not extreme) 8. RSI Divergence — price makes a new extreme but RSI does not confirm, signaling exhaustion 9. Volume — current volume exceeds the moving average in the signal direction 10. EMA Alignment — fast, medium, and slow EMAs are stacked in the signal direction, or price is positioned correctly relative to the 200 EMA The score (0–10) is displayed in the dashboard alongside a weighted confidence percentage (0–100%) and a letter grade (D through A+). ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🎯 Weighted Confidence Engine In addition to the 10-factor binary confluence score, AlphaX Prism computes a weighted confidence percentage that assigns different point values to each factor based on its structural importance. Bull / Bear Confidence Scoring Breakdown: Bounce from Support / Rejection from Resistance — up to 18 points (the single most important condition in price action trading) Price at Key Level without confirmed bounce/rejection — 12 points PA Pattern Type — Engulfing: 14 pts | Momentum Shift: 12 pts | Pin Bar: 10 pts | Inside Bar Break: 8 pts Institutional Candle — 12 points | Absorption: 8 points Trend Structure Aligned — 10 points | Structural confirmation only: 6 points MACD Momentum — both line and histogram aligned: 6 pts | line only: 3 pts RSI Slope in Range — 5 points RSI Divergence — 8 points Volume Spike — 6 points | Above average: 3 points EMA Trend Fully Aligned — 8 points | Price above/below 200 EMA only: 3 points ADX Strong — 6 points Penalty Deductions: RSI at opposite extreme — -12 points (signal in wrong RSI zone) Counter-trend direction — -15 points (trading against the established structure) ADX weak / no trend — -6 points Price overextended from EMA — -8 points No PA pattern at all — -10 points (structure without a trigger is not enough) Below average volume — -4 points Letter Grade Scale: A+ — 70% and above: exceptional confluence, all major factors aligned A — 55–69%: high-quality setup with strong structural backing B — 40–54%: good setup with most factors aligned C — 25–39%: marginal setup, use caution and tighter risk management D — below 25%: weak confluence, typically filtered out before display ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📐 EMA System Three Exponential Moving Averages provide structural context for trend bias and signal filtering: Fast EMA (21) — yellow-green cross markers — the immediate momentum reference. When price holds above the Fast EMA, intrabar momentum favors longs. Medium EMA (50) — gray line — the intermediate trend filter. Slope direction confirms trend momentum across recent bars. Slow EMA (200) — dark gray line, thicker — the structural backbone. Price position relative to the 200 EMA contributes to the confidence score and defines the macro bias. EMA Fan Analysis: All three EMAs fanning outward in order (Fast > Medium > Slow for bullish) — healthy trend, re-entry signals carry higher confidence EMAs converging — trend is weakening, expect chop or reversal EMAs tangled and flat — range-bound market, step aside and wait for structure to return ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📊 Trend Structure Detection AlphaX Prism tracks swing-based market structure using configurable pivot detection: Uptrend (▲ UPTREND) — confirmed when the most recent significant high is higher than the prior high AND the most recent significant low is higher than the prior low (Higher Highs + Higher Lows) Downtrend (▼ DOWNTREND) — confirmed when the most recent significant high is lower than the prior high AND the most recent significant low is lower than the prior low (Lower Highs + Lower Lows) A configurable cooldown prevents label spam during choppy structure transitions The trend structure direction is used as a directional filter and adds directly to the confluence score. Signals trading against the identified structure receive a significant confidence penalty. ADX is calculated alongside the swing structure to confirm whether the trend has sufficient momentum. The ADX threshold (default: 22) prevents signals from firing during flat, low-conviction periods — regardless of how many other factors align. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📈 RSI Divergence Detection AlphaX Prism includes a built-in RSI divergence scanner that runs continuously alongside all other analysis: Bullish Divergence — price makes a lower low but the RSI pivot low is higher than the prior RSI low — indicating weakening bearish momentum Bearish Divergence — price makes a higher high but the RSI pivot high is lower than the prior RSI high — indicating weakening bullish momentum Divergences are validated against pivot lookback windows to ensure they represent meaningful structural shifts rather than random oscillator noise. When detected, they are marked with small diamond shapes and contribute up to 8 points to the confidence score. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🚀 How to Trade with AlphaX Prism — Step by Step Step 1 — Read the Dashboard Check PRICE POSITION: Is price bouncing from support, rejecting resistance, or between levels? Check TREND: Is structure bullish, bearish, or ranging? Check ADX: Is there a trending environment, or is it weak and directionless? Check PA PATTERN: Is there a qualifying candle pattern on the current bar? If VERDICT reads "WEAK TREND — WAIT" or "NO PA PATTERN — WAIT" → do not enter. Preserve capital. Step 2 — Wait for an Entry Signal A ▲ or ▼ signal label appears when all mandatory conditions are met Check the dashboard for the BULL SCORE or BEAR SCORE and the letter grade — higher grades represent cleaner, higher-probability setups An A or A+ grade at a confirmed key level with institutional activity is the highest-conviction setup the system can produce Step 3 — Confirm the Setup Manually Review FACTORS in the dashboard — which of the 10 conditions are confirmed? Look for a Bounce from Support or Rejection from Resistance as the anchor Verify that volume is above average and the institutional footprint dots support the direction Place your stop loss beyond the recent swing high/low or beyond the key level zone Step 4 — Manage the Trade Monitor the dashboard for changes in trend, RSI state, and institutional flow If the VERDICT shifts from your trade direction, begin tightening your stop loss Use subsequent entry signals in the same direction as opportunities to add to a winning position Step 5 — Exit on the ✕ Mark When an exit marker appears, the system has detected a counter-trend structural condition Take partial or full profit Do not immediately reverse — wait for a new entry signal in the opposite direction before committing to a new trade ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚡ Key Features 🏗 Automatic Key Level detection with zone merging, touch counting, and age management 🕯 Five Price Action pattern types — Engulfing, Pin Bar, Inside Bar Breakout, Momentum Shift, and Strong Directional Candle 🏦 Institutional footprint tracking — directional institutional candles and absorption patterns with volume validation 🧠 10-factor confluence binary score + weighted percentage confidence engine with A+ to D letter grading 📐 Three EMAs (21 / 50 / 200) for structural context, fan analysis, and trend bias 📉 Swing-based trend structure detection with HH/HL and LL/LH logic and a configurable trend label cooldown ⚡ ADX integration — prevents signals from firing in low-conviction, ranging environments 💎 RSI divergence scanner — continuously monitors for bullish and bearish momentum divergence 📊 MACD momentum engine — directional and histogram-based momentum alignment ✕ Context-aware exit signals — fire only after an active entry and only under specific structural reversal conditions 🖥 Fully featured dashboard — price position, PA pattern, institutional activity, trend, EMA, RSI, volume, confluence scores, verdict, and last signal details all in one panel 🎨 Cohesive dual-tone color theme — yellow-green for bullish, red for bearish, gray for neutral and weak conditions 🔔 8 alert conditions — long/short signals, engulfing at key levels, institutional candles, and RSI divergences ⚙ Fully configurable — all swing lengths, thresholds, ATR multipliers, confluence minimums, EMA periods, colors, and display toggles are adjustable from the settings panel ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚙ Settings Reference Key Levels Key Level Swing Length — pivot detection lookback for support/resistance identification (default: 8) Merge Zones (x ATR) — how close two levels must be to merge into a single zone (default: 1.2× ATR) Max Active Zones — maximum number of key level zones displayed simultaneously (default: 6) Zone Max Age (bars) — how many bars before a zone is retired and removed (default: 250) Show Key Level Zones — toggle zone box fills Show Key Level Lines — toggle dotted center lines Min Touches to Confirm — how many interactions before a zone is considered confirmed and color-coded (default: 2) Price Action Show PA Pattern Markers — toggle all price action pattern markers Min Body Ratio (Engulf) — minimum body-to-range ratio required for engulfing patterns (default: 0.4) Pin Bar Wick Ratio — minimum wick-to-body ratio required for pin bars (default: 2.5) Show Inside Bar Breakouts — enable/disable inside bar breakout signals Show Momentum Shift — enable/disable 3-bar momentum shift detection Institutional Flow Inst. Body Size (x Avg) — body size multiplier required for institutional candle detection (default: 1.8) Inst. Volume (x Avg) — volume multiplier required for institutional candle detection (default: 1.3) Show Institutional Candles — toggle all institutional footprint dots Trend Context Trend Swing Length — pivot lookback for trend structure HH/HL/LL/LH detection (default: 12) Show Trend Shift Labels — toggle UPTREND/DOWNTREND structural labels Trend Label Cooldown — minimum bars between consecutive trend labels (default: 18) ADX Length — period for ADX trend strength calculation (default: 14) ADX Trend Threshold — minimum ADX value required to permit signal generation (default: 22) Momentum RSI Length — period for RSI calculation (default: 14) Show RSI Divergence — toggle the RSI divergence scanner and markers Volume Volume MA Length — period for volume moving average used in all volume comparisons (default: 20) EMA Settings Show Fast / Medium / Slow EMA — individual visibility toggles for each EMA Fast EMA Length — default: 21 Medium EMA Length — default: 50 Slow EMA Length — default: 200 Confluence Engine Min Confluence Score — minimum number of the 10 factors required to permit signal generation (default: 4) Show Entry Signals — toggle all ▲ / ▼ entry signal labels Signal Cooldown (bars) — minimum bars between consecutive signals (default: 12) Show Exit Signals — toggle all ✕ exit signal markers Display Show Dashboard — toggle the full dashboard panel Dashboard Position — Top Right / Top Left / Bottom Right / Bottom Left Dashboard Text Size — Tiny / Small / Normal Dashboard Background — configurable background color Theme Colors Bull Primary / Bright / Dim — the yellow-green family for all bullish elements Bear Primary / Bright / Dim — the red family for all bearish elements Support / Resistance / Neutral Zone Colors — configurable zone color scheme Pattern Color — marker color for price action pattern labels Institutional Color — dot color for institutional footprint markers Individual EMA Colors — Fast (yellow-green), Medium (gray), Slow (dark gray) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔔 Alert Conditions Prism Long Signal — fires when a confirmed ▲ entry signal appears Prism Short Signal — fires when a confirmed ▼ entry signal appears Engulf at Support — fires when a bullish engulfing pattern forms at a confirmed support zone Engulf at Resistance — fires when a bearish engulfing pattern forms at a confirmed resistance zone Institutional Buying — fires when an institutional bullish candle is detected Institutional Selling — fires when an institutional bearish candle is detected RSI Bull Divergence — fires when a confirmed bullish RSI divergence is detected RSI Bear Divergence — fires when a confirmed bearish RSI divergence is detected All alert messages include {{ticker}} and {{interval}} placeholders for clean webhook and bot integration. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🎯 Default Settings — Optimized For The default configuration is tuned for intraday trading on XAUUSD, forex majors, and indices (NAS100, US30, SPX500) on timeframes from M1 to H1. For best results across different instruments: Higher timeframes (H1, H4) — increase Trend Swing Length to 18–25, increase Min Confluence to 5–6, increase Signal Cooldown to 20–30 Volatile instruments (Gold, NAS100) — use defaults or increase ADX threshold to 25 for tighter trend filtering Forex majors (EURUSD, GBPUSD) — reduce Inst. Body Size multiplier to 1.5, keep defaults otherwise Calmer instruments — reduce ADX threshold to 18–20, reduce Min Confluence to 3 Fewer, cleaner signals — increase Min Confluence Score, increase ADX Threshold, increase Signal Cooldown More frequent signals — decrease Min Confluence Score to 3, decrease Signal Cooldown to 8, reduce ADX Threshold to 18 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 👥 Who This Is For 🥇 Price action traders — built on the foundations of PA trading: key levels, candlestick patterns, and structural context, with no dependence on arbitrary indicator signals 🏦 Traders who want to track institutional activity — the footprint engine highlights where large money is likely entering and exiting the market 📊 Confluence-based traders — the 10-factor scoring system provides a systematic, quantified framework for evaluating setups rather than relying on intuition alone 🧠 Systematic and discretionary traders alike — the dashboard makes every condition transparent and readable at a glance, while the alert system supports fully automated notification workflows 📈 Traders who struggle with overtrading — the mandatory ADX filter, PA pattern requirement, and minimum confluence threshold physically prevent weak or unqualified setups from generating signals 🎨 Traders who value clean, uncluttered charts — all elements follow a cohesive color theme, and the system is designed to show you only what matters, when it matters ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📝 Notes All signals are calculated on bar close — AlphaX Prism is non-repainting. A signal that appears will not disappear on the next bar. The key level zone boxes extend to the right edge of the chart in real time. As new bars form, zones that have aged beyond the maximum bar count are automatically removed. RSI divergence detection uses a 5-bar pivot lookback on each side — divergences are confirmed only when the current bar is within 3 bars of the pivot, and the two pivots are between 5 and 50 bars apart, ensuring only meaningful divergences are flagged. Designed for M1 through H1 timeframes. On daily or weekly charts, the ADX and confluence filters still function, but key level zone density may need adjustment via the swing length and max zones settings. Maximum 500 labels and 500 boxes are used — on very low timeframes with extended chart history, oldest elements may be automatically removed by TradingView's rendering limits. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠ Disclaimer This indicator is a technical analysis and visualization tool intended for educational and informational purposes only. It does not constitute financial advice or a recommendation to buy or sell any financial instrument. All signals are generated from historical and real-time price data using mathematical calculations — their accuracy or profitability is not guaranteed. Past performance of any signal type does not guarantee future results. Always conduct your own analysis, use proper risk management, and consult a licensed financial advisor before making any trading decisions. The author accepts no responsibility for any losses incurred from the use of this indicator. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Built for traders who trade what they see — not what they hope.
Indicador Pine Script®
por AlphaX-Trade
[ A L P H A X ] Elliott Wave Detection & Fibonacci Golden ZoneAlphaX Wave – Elliott Wave Detection, Fibonacci Golden Zone Mapping, Multi-Confluence Scoring & Smart SL/TP System AlphaX Wave is a professional-grade Elliott Wave analysis and trade signal system built on a proprietary multi-engine architecture that fuses automated wave counting, Fibonacci golden zone projection, multi-factor momentum scoring, and structure-based stop loss and target placement into a single cohesive tool. It identifies impulse wave patterns (waves 1–5), detects corrective ABC structures, projects Fibonacci retracement zones, scores trade setups across eight independent confluence factors, and generates graded entry signals with intelligent SL/TP levels derived from swing structure, Fibonacci levels, and wave projections. Designed for traders who use Elliott Wave theory as their primary framework on instruments like XAUUSD, indices, forex majors, and crypto. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔬 The Wave Engine — How It Works At the core of AlphaX Wave is an automated Elliott Wave detection algorithm that identifies the classical 5-wave impulse structure and 3-wave corrective patterns in real-time. Unlike manual wave counting, this engine applies strict mathematical validation rules derived from Elliott Wave theory to ensure only structurally valid patterns are labeled. Impulse Wave Detection (Waves 1–5) The engine uses a rolling buffer of confirmed swing highs and swing lows detected via a configurable pivot lookback. When at least three swing highs and three swing lows are available, the engine tests them against the following Elliott Wave rules: Wave 2 must not retrace beyond the start of Wave 1 — validated by checking that the second swing low remains above the first swing low (bullish) or below the first swing high (bearish) Wave 3 must not be the shortest impulse wave — validated by comparing the Wave 3 range to at least 70% of the Wave 1 range Wave 4 must not overlap into Wave 1 territory — validated by checking that the Wave 4 low stays above the Wave 2 low (bullish) or Wave 4 high stays below the Wave 2 high (bearish) Wave 2 retracement must be between 15% and 95% of Wave 1 — filters out patterns that are too shallow or too deep Wave 4 retracement must be between 10% and 90% of Wave 3 — ensures proper proportionality Temporal ordering must be correct — all six pivot points must occur in strict chronological sequence Wave 5 must exceed Wave 3's high (bullish) or undercut Wave 3's low (bearish) — confirms the impulse completed with a new extreme When all rules pass simultaneously, the engine marks the complete 1–5 impulse structure on the chart with numbered labels and connecting wave lines. Wave 3 and Wave 5 receive larger, brighter labels because they represent the highest-momentum phases of the impulse. Corrective Wave Detection (ABC Pattern) After an impulse completes, the engine monitors for corrective price action: For a completed bullish impulse — the engine watches for a pullback that retraces between 20% and 72% of the impulse range, indicating an ABC correction is forming For a completed bearish impulse — the engine watches for a bounce that retraces between 20% and 72% of the impulse range The correction must originate after Wave 5 completes — ensures proper sequence A configurable cooldown prevents multiple correction labels from firing on the same structure Corrective zones are particularly valuable because they represent potential entry opportunities in the direction of the prior impulse trend — the market is pulling back within a larger trend structure. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📐 Fibonacci Golden Zone System When an impulse wave completes, the engine automatically projects Fibonacci retracement levels across the entire impulse range: 38.2% Retracement — the shallowest institutional retracement level 50.0% Retracement — the equilibrium midpoint of the impulse 61.8% Retracement — the golden ratio level, highest-probability reversal zone The area between the 38.2% and 61.8% levels forms the Golden Zone — a shaded box that represents the highest-probability area for the corrective wave to terminate and the trend to resume. This is where institutional traders typically place their limit orders. The Golden Zone system includes intelligent lifecycle management: Zones automatically expire after a configurable maximum age (default 80 bars) Zones are removed when price closes significantly beyond them (1.5 ATR past the zone boundary) — indicating the zone has been invalidated Maximum active zones are capped (configurable) to keep the chart clean The indicator tracks whether price is currently inside a bullish or bearish Golden Zone — this information feeds directly into the confluence scoring engine ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📊 Wave 3 Setup Detection Wave 3 is traditionally the strongest and longest wave in Elliott Wave theory. AlphaX Wave includes a dedicated Wave 3 Setup Scanner that identifies potential Wave 3 initiations in real-time: Detects when price has completed a valid Wave 1 (impulse move) followed by a Wave 2 (pullback between 15% and 90% of Wave 1) Confirms the pullback low remains above the Wave 1 starting point (bullish) or below it (bearish) — validating the wave structure Requires a directional confirmation candle (close above prior high for bullish, close below prior low for bearish) Marked with small purple triangles — ▲ below bar for bullish Wave 3 setups, ▼ above bar for bearish Wave 3 setups are among the highest-probability trade entries in all of technical analysis because they align with the strongest phase of the impulse trend. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🧠 8-Factor Confluence Scoring Engine Every potential trade signal is evaluated across eight independent confluence factors . Each factor scores either 0 or 1 point, producing a confluence score from 0 to 8. Only signals meeting your configured minimum confluence threshold are displayed. Factor 1 — Wave 3 Setup (W3) Is a valid Wave 3 initiation pattern present? This is the single most powerful factor — Wave 3 moves are the strongest in Elliott theory Factor 2 — ABC Correction Zone (ABC) Is the market currently in a corrective phase following a completed impulse? Corrections within trends offer the best risk/reward entries Factor 3 — Price in Fibonacci Golden Zone (FIB) Is price currently inside an active Golden Zone box (between 38.2% and 61.8% retracement)? Golden Zone entries have institutional backing Factor 4 — Price at Specific Fibonacci Level (FLV) Is price at or near the 38.2%, 50.0%, or 61.8% retracement level specifically? Precision Fibonacci entries add edge beyond just being "in the zone" Factor 5 — Momentum Alignment (MOM) Are RSI slope, MACD direction, MACD histogram momentum, and Stochastic all aligned in the signal direction? Requires at least 2 of 5 momentum sub-factors to confirm Factor 6 — RSI Divergence (DIV) Is a confirmed RSI divergence present (price makes new low but RSI makes higher low, or vice versa)? Divergence is one of the most reliable reversal confirmation signals Factor 7 — Volume Confirmation (VOL) Is current volume above the moving average with a candle closing in the signal direction? Volume validates institutional participation in the move Factor 8 — EMA Trend Alignment (EMA) Are the Fast (21), Medium (50), and Slow (200) EMAs properly stacked in the signal direction? Or is price at least above/below the 200 EMA with Fast above/below Medium? ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📊 Confidence Scoring & Grade System Beyond the 8-factor confluence count, each signal receives a weighted confidence score from 0 to 100% that reflects the quality and strength of the setup: Wave Structure (up to 22 points) Wave 3 Setup present = 22 points (highest single contributor) ABC Correction active = 12 points Fibonacci Alignment (up to 22 points) Price inside Golden Zone = 15 points Price at 61.8% level = 7 points, at 50.0% = 5 points, at 38.2% = 4 points Momentum Confirmation (up to 23 points) Momentum aligned (2+ sub-factors) = 12 points Strong momentum (4+ sub-factors) = additional 6 points MACD crossover on signal bar = 5 points RSI Analysis (up to 14 points) RSI divergence confirmed = 10 points RSI slope in ideal range = 4 points RSI already at opposite extreme (penalty) = -5 points Volume & Trend (up to 20 points) Volume above average + directional candle = 5 points Volume spike + directional candle = 3 points Full EMA alignment (Fast > Medium > Slow or reverse) = 8 points Cloud direction confirmed = 4 points Signals are classified into grades based on the final confidence score: A+ Grade (70%+) — Exceptional setup. Maximum confluence across wave structure, Fibonacci, momentum, and trend. A Grade (55–69%) — High-quality setup. Most major factors aligned. B Grade (40–54%) — Solid setup. Core conditions met with moderate confirmation. C Grade (25–39%) — Marginal setup. Basic conditions met but weaker confirmation. Hidden by default. D Grade (below 25%) — Weak setup. Minimal confluence. Hidden by default. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📊 Signal Labels — What They Show Each entry signal label displays comprehensive information in a compact format: Direction — ▲ LONG or ▼ SHORT with spaced lettering Grade — A+, A, B, C, or D classification Confidence Percentage — The weighted score from the confidence engine Confluence Count — How many of the 8 factors are active (e.g., 5/8) Active Factor Checklist — Shows exactly which factors contributed: ✓W3 ✓ABC ✓FIB ✓FLV ✓MOM ✓DIV ✓VOL ✓EMA Label colors follow the grade system: Bull signals — Bright green (A+), Primary green (A), Dim green (B), Neutral gray (C/D). All use dark text for readability. Bear signals — Bright red (A+), Primary red (A), Dim red (B), Neutral gray (C/D). All use white text for readability. A thin dotted line connects the signal label to the price bar, keeping the label offset from price action to avoid chart clutter. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🎯 Smart SL/TP System — Structure-Based Risk Management Every entry signal automatically generates three trade management levels — Stop Loss, Target 1, and Target 2 — using a multi-source calculation engine that prioritizes structural price levels over arbitrary ATR multiples. Stop Loss Calculation The SL engine searches for the optimal stop placement using this priority cascade: Nearest swing structure — Finds the closest confirmed swing low (for longs) or swing high (for shorts) within a 50-bar lookback. Places the SL beyond this level with ATR padding. ATR floor and cap — Ensures the SL is never too tight (70% of base ATR multiple) or too wide (180% of base ATR multiple) regardless of swing structure. Confidence modifier — Higher-grade signals receive tighter stops (0.85× for A+, 0.92× for A, 1.0× for B, 1.15× for C/D). This reflects the higher-probability nature of strong setups. Target 1 Calculation TP1 represents the conservative take-profit level: Nearest opposing swing — Searches for the closest swing high above entry (longs) or swing low below entry (shorts) that provides at least 1.2× the SL distance. Fibonacci level targeting — If an active Fibonacci zone has a 38.2% or 50.0% level above/below entry that provides better targeting than the swing level, the Fib level is used. Minimum R:R enforcement — TP1 is guaranteed to provide at least the configured ATR multiple (default 2.5×) of risk-reward. Target 2 Calculation TP2 represents the extended profit target: Wave-based projection — If an impulse wave is active, TP2 is calculated as 61.8% of the total impulse range — representing the typical next-wave target. Far swing structure — Searches for swing levels further than TP1 that provide at least 1.3× the TP1 distance. Fibonacci extension — If the 61.8% Fibonacci level provides a target beyond TP1, it is used as TP2. Minimum spacing — TP2 is guaranteed to be at least 1.5× the TP1 distance from entry. Break-Even Protection When TP1 is hit, the system automatically adjusts the Stop Loss to the entry price (break-even). The SL label changes to "BE" with a neutral color, visually confirming that the trade is now risk-free on the remaining position targeting TP2. Hit Tracking All SL/TP levels are tracked in real-time: When a level is hit, the label changes color — red fill for SL hits, green fill for TP hits SL hits are processed first — if the SL is hit, TP levels for that trade are no longer tracked TP1 must be hit before TP2 tracking activates the break-even mechanism Historical SL/TP groups are automatically trimmed to keep the chart clean (configurable history count) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📐 Trend Context Layer Three independent trend analysis systems provide structural context: Triple EMA System Fast EMA (21) — Yellow-green crosses. Immediate momentum reference. Medium EMA (50) — Gray line. Intermediate trend filter. Slow EMA (200) — Dark gray, thicker line. Macro structural backbone used in confidence scoring. When all three are properly stacked (Fast > Medium > Slow for bullish, reverse for bearish), trend alignment scores maximum points. Trend Cloud Calculated from the midpoints of the highest high / lowest low over fast (9) and slow (26) periods When the fast midpoint is above the slow midpoint, the cloud fills green — bullish bias When below, the cloud fills red — bearish bias Cloud direction adds 4 points to the confidence score when aligned with the signal RSI Divergence System Detects classical RSI divergence using pivot-based comparison Bullish divergence — price makes a lower low but RSI makes a higher low Bearish divergence — price makes a higher high but RSI makes a lower high Divergence must occur within a valid lookback window (5–50 bars between pivots) and be recent (within 3 bars of the current RSI pivot) Marked with small diamond shapes — green below bar for bullish, red above bar for bearish ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📊 Momentum Engine The momentum engine combines four oscillator systems into a unified momentum score: RSI Slope — Smoothed RSI direction over 2 bars. Bullish when RSI is between 40–75 and rising. Bearish when RSI is between 25–60 and falling. MACD Direction — MACD Line above Signal Line = bullish, below = bearish. MACD Histogram Momentum — Histogram increasing = bullish momentum, decreasing = bearish momentum. Stochastic Alignment — %K above %D with room to run (below 80) = bullish. %K below %D with room to fall (above 20) = bearish. MACD Crossover — Fresh MACD crossover on the signal bar adds additional confirmation. Scores of 2+ out of 5 confirm momentum alignment. Scores of 4+ indicate strong momentum — adding bonus points to the confidence score. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📐 Dashboard Intelligence A comprehensive 3-column AlphaX-branded dashboard provides real-time analysis across all engine layers: Wave & Fibonacci Status Current wave phase — Impulse 1–5 (detected/active), Corrective ABC, or Scanning Wave trend direction — Bullish or Bearish impulse context Fibonacci status — In Golden Zone, at specific level, or no active zone Active Fibonacci zone count Momentum & Trend Momentum state — Strong Bull/Bear, Bullish/Bearish, or Flat Bull/Bear sub-factor scores (e.g., 3▲ 1▼) EMA trend alignment — Bull Aligned, Bear Aligned, or Mixed Price position relative to 200 EMA Cloud direction — Bullish, Bearish, or Flat Volume & Oscillators Relative volume — Spike, High, Normal, or Dry with exact ratio RSI state — Overbought, Oversold, Rising, Falling, or Neutral with numeric value Confluence & Verdict Bull confluence score — count out of 8, confidence percentage, and letter grade Bear confluence score — count out of 8, confidence percentage, and letter grade Verdict — the engine's overall assessment: High Confidence Long, High Confidence Short, Lean Long/Short with Caution, Mixed — Stand Aside, or No Clear Edge ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🚀 How to Trade with AlphaX Wave — Step by Step Step 1 — Identify the Wave Structure Look for completed impulse patterns (numbered 0–5 on the chart) Check the Dashboard: What is the current Wave Phase? If "SCANNING" — no valid wave structure detected yet. Wait for pattern formation. Step 2 — Wait for Correction or Wave 3 Setup After an impulse completes, watch for the "ABC CORRECTION ZONE" label — this is where the market is pulling back within the trend Watch for Wave 3 Setup triangles (▲/▼) — these mark the beginning of the strongest wave Check if price is entering a Fibonacci Golden Zone (purple shaded box) Step 3 — Enter on Confluence Signal Wait for a graded entry label (▲ LONG or ▼ SHORT) to appear Check the grade — A+ and A signals have the highest probability Review the factor checklist — more ✓ marks = stronger setup The SL and TP levels are automatically plotted for immediate trade management Step 4 — Manage the Trade Monitor the SL/TP levels on the chart — they update automatically When TP1 is hit, the label lights up green and the SL moves to break-even Hold the remaining position for TP2 risk-free If SL is hit first, the label turns red — accept the loss and wait for the next setup Step 5 — Read the Verdict The Dashboard Verdict row summarizes the engine's real-time assessment "HIGH CONFIDENCE LONG/SHORT" — all systems aligned, actively look for entries "LEAN LONG/SHORT — CAUTION" — some alignment but not full, trade with reduced size "MIXED — STAND ASIDE" — conflicting signals, do not trade "NO CLEAR EDGE" — insufficient data, wait for structure to develop ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠ When NOT to Trade — Reading the Warning Signs Dashboard shows "SCANNING" — No valid wave structure detected. The market may be in a complex correction or transition phase. Verdict shows "MIXED — STAND ASIDE" — Bull and bear confluence are both active simultaneously. Conflicting signals cancel each other. Cloud is flat or rapidly switching colors — No established trend direction. Signals during cloud transitions are less reliable. EMAs are tangled and flat — Range-bound market. Wave patterns in choppy conditions produce lower-quality signals. Only C or D grade signals appearing — Insufficient confluence. These grades are hidden by default for a reason. RSI showing "OVERBOUGHT" on a long signal — The confidence engine already penalizes this (-5 points), but it is worth noting visually as well. Volume showing "DRY" — Low-volume environments reduce the reliability of all technical patterns including waves. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚡ Key Features 🔬 Automated Elliott Wave impulse detection (1–5) with strict rule validation 📐 ABC corrective pattern recognition with retracement depth validation 🎯 Wave 3 Setup Scanner — identifies the strongest wave initiation points 📊 Fibonacci Golden Zone projection with intelligent lifecycle management 🧠 8-factor confluence scoring — Wave, ABC, Fibonacci, Fibonacci Level, Momentum, Divergence, Volume, EMA 📈 Weighted confidence scoring (0–100%) with A+ through D grade classification ▲▼ Detailed signal labels showing grade, confidence, confluence count, and active factor checklist 🎯 Structure-based SL/TP system — swing levels, Fibonacci targets, and wave projections 🛡 Automatic break-even protection when TP1 is hit 📊 Real-time hit tracking with visual color changes on SL/TP labels ☁ Trend Cloud with gradient fill for instant directional bias 📐 Triple EMA system (21/50/200) for structural trend context 💎 RSI divergence detection with pivot-based validation 📊 Multi-oscillator momentum engine (RSI, MACD, Stochastic) 📊 Volume spike detection with configurable multiplier 📐 Comprehensive 3-column dashboard with verdict system 🎨 Cohesive triple-tone color theme — Green for bull, Red for bear, Purple for wave structure 🔔 10 alert conditions — signals, impulses, corrections, Wave 3 setups, and divergences ⚙ Fully configurable — wave detection, Fibonacci, momentum, signals, SL/TP, and all visuals ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚙ Settings Reference Wave Detection Swing Detection Length — Pivot lookback for identifying swing highs and lows (default: 6) Show Wave Count Labels — Toggle the numbered 0–5 labels on impulse waves Show Wave Structure Lines — Toggle the connecting lines between wave points Show Impulse Completion — Toggle the "IMPULSE COMPLETE" notification labels Show Corrective Patterns — Toggle the "ABC CORRECTION ZONE" labels Show Wave 3 Setup Markers — Toggle the purple triangle markers Wave Pattern Cooldown — Minimum bars between wave pattern detections (default: 18) Fibonacci Show Fib Golden Zone Boxes — Toggle the shaded 38.2%–61.8% retracement zone Max Fib Zone Boxes — Maximum simultaneous Golden Zones (default: 3) Fib Zone Max Age — Bars before a zone auto-expires (default: 80) Momentum RSI Length / Smoothing — Core RSI calculation parameters MACD Fast / Slow / Signal — MACD oscillator parameters Show RSI Divergence — Toggle divergence diamond markers Volume Volume MA Length — Baseline period for volume comparison (default: 20) Volume Spike Multiplier — Threshold for spike detection (default: 1.6×) Show Volume Spike Dots — Toggle volume spike indicators at bar bottom EMA Settings Fast / Medium / Slow EMA — Independently toggle visibility and set periods Defaults: 21 / 50 / 200 Trend Cloud Show Trend Cloud — Toggle the gradient cloud fill Cloud Fast / Slow Length — Midpoint calculation periods (default: 9 / 26) Confluence Engine Min Confluence Score — Minimum factors required for a signal (default: 3 of 8) Show Entry Signals — Toggle signal labels Signal Cooldown — Minimum bars between signals (default: 10) Signal Label Offset — Distance below/above bar in ATR units (default: 3.0) Show Grade C / D Signals — Toggle lower-quality signal visibility (default: off) SL / TP Show Stop Loss & Targets — Toggle all SL/TP visual elements Stop Loss (× ATR) — Base ATR multiple for stop loss calculation (default: 2.0) Target 1 (× ATR) — Base ATR multiple for conservative target (default: 2.5) Target 2 (× ATR) — Base ATR multiple for extended target (default: 5.0) Limit SL/TP History — Cap the number of visible historical trade levels SL/TP History Count — Maximum trade groups shown (default: 8) Move SL to Break Even after TP1 — Enable/disable break-even protection Display Show Dashboard — Toggle the information panel Dashboard Position — Top Right, Top Left, Bottom Right, Bottom Left Dashboard Text Size — Tiny, Small, Normal Dashboard Background — Background color for the panel Theme Colors Bull Primary / Bright / Dim — Green family for bullish elements Bear Primary / Bright / Dim — Red family for bearish elements Wave Primary / Bright / Dim — Purple family for wave structure elements Fibonacci Levels / Dim — Purple-pink family for Fibonacci zones EMA colors — Fast (green), Medium (gray), Slow (dark gray) Neutral — Gray for inactive/mixed states ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔔 Alert Conditions Wave Long Signal — Fires when a graded bullish entry signal appears Wave Short Signal — Fires when a graded bearish entry signal appears Bullish Impulse Complete — Fires when a full 1–5 bullish impulse is detected Bearish Impulse Complete — Fires when a full 1–5 bearish impulse is detected Wave 3 Bull Setup — Fires when a bullish Wave 3 initiation pattern is detected Wave 3 Bear Setup — Fires when a bearish Wave 3 initiation pattern is detected RSI Bull Divergence — Fires when bullish RSI divergence is confirmed RSI Bear Divergence — Fires when bearish RSI divergence is confirmed Bullish ABC Correction — Fires when a bullish corrective zone is identified Bearish ABC Correction — Fires when a bearish corrective zone is identified All alert messages include {{ticker}} and {{interval}} placeholders for clean webhook integration. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🎯 Default Settings — Optimized For The default configuration is tuned for XAUUSD (Gold) and major instruments on the 5-minute to 1-hour timeframes : Swing Length at 6 captures wave structure without excessive lag on intraday charts Minimum confluence at 3/8 ensures signals have meaningful multi-factor backing Signal cooldown at 10 bars prevents rapid-fire signals during volatile wave transitions SL at 2.0 ATR with structure-based adjustment provides adaptive risk sizing TP1 at 2.5 ATR and TP2 at 5.0 ATR provide minimum 1.25R and 2.5R risk-reward ratios Break-even protection ensures profitable trades are protected after TP1 Grade C and D signals hidden by default to maintain signal quality For other instruments or timeframes, adjust: Higher timeframes (4H, Daily) — Increase Swing Length to 8–14, increase Wave Cooldown to 30–50, increase SL/TP ATR multiples Lower timeframes (1m) — Reduce Swing Length to 4–5, reduce Signal Cooldown to 5–7, increase Min Confluence to 4 Forex majors — Use defaults, optionally reduce Swing Length to 5 for tighter wave detection Crypto — Increase Swing Length to 8–10 (higher volatility), increase SL ATR multiple to 2.5–3.0 Fewer, higher-quality signals — Increase Min Confluence to 4–5, increase Signal Cooldown, hide Grade C/D More signals — Reduce Min Confluence to 2, enable Grade C signals, reduce cooldown ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 👥 Who This Is For 📐 Elliott Wave Practitioners — Automated wave counting with strict rule validation eliminates subjective bias 📊 Fibonacci Traders — Automatic Golden Zone projection with lifecycle management removes manual drawing 🥇 Gold & Forex Intraday Traders — Optimized for instruments with clean wave structures on fast timeframes 🧠 Systematic Traders — The 8-factor confluence + weighted confidence system provides a fully quantitative framework 🎯 Traders who want complete trade plans — Entry, SL, TP1, TP2, and break-even all generated automatically 📈 Traders learning Elliott Wave — The visual wave labels and structure lines serve as an educational overlay ⚠ Traders who struggle with exit management — The SL/TP system with hit tracking and break-even automation removes emotional decision-making ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📝 Notes Wave detection uses confirmed pivot points (offset by the swing length) — wave labels appear after structural confirmation, not in real-time. This prevents repainting. The indicator requires sufficient bar history to populate swing buffers — allow at least 100+ bars of data before expecting wave pattern detection Elliott Wave rules are applied as mathematical approximations of the classical theory — certain complex wave structures (extended waves, truncations, diagonal triangles) may not be detected SL/TP levels are calculated at signal time and do not adjust afterward (except the break-even mechanism on TP1 hit) Maximum 500 labels, 500 lines, and 500 boxes are used — on very low timeframes with extended history and many signals, oldest drawings may be automatically removed by TradingView's rendering limits The SL/TP history is automatically trimmed to the configured limit (default 8 trade groups = 24 labels/lines) to stay within TradingView's drawing limits All confluence factors and confidence scores are recalculated on every bar — the dashboard reflects the current bar's state, not the last signal's state ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠ Disclaimer This indicator is a technical analysis and visualization tool intended for educational and informational purposes only. It does not constitute financial advice or a recommendation to buy or sell any financial instrument. Elliott Wave patterns, Fibonacci levels, and all signals are generated from historical and real-time price data using mathematical calculations — their accuracy or profitability is not guaranteed. Elliott Wave theory is inherently subjective and interpretive; automated detection provides one possible wave count among many valid alternatives. Past wave patterns and signal performance do not guarantee future results. Always conduct your own analysis, use proper risk management, and consult a licensed financial advisor before making any trading decisions. The author accepts no responsibility for any losses incurred from the use of this indicator. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Built for traders who demand clarity, confidence, and precision from their charts.
Indicador Pine Script®
por AlphaX-Trade
6
[ A L P H A X ] Order Blocks Institutional Supply & Demand ZoneAlphaX Order Blocks – Institutional Supply & Demand Zone Intelligence, Strength Scoring & Flip Detection AlphaX Order Blocks is a professional-grade supply and demand zone detection system built on a proprietary multi-factor zone strength scoring engine. It identifies institutional order block zones where smart money has left footprints, tracks zone freshness through multi-touch degradation, detects flip zones when broken levels reverse polarity, and delivers confidence-scored entry signals at the highest-probability reaction points. Designed for traders who want to see where the institutions are positioned on instruments like XAUUSD, indices, forex majors, and crypto. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔬 The Order Block Engine — How It Works At the core of AlphaX Order Blocks is an institutional zone detection algorithm that identifies price levels where aggressive buying or selling originated. Unlike simple support and resistance lines, these zones represent areas where large orders were placed — and where unfilled orders may still be waiting. The detection process follows three steps: Step 1 — Impulse Move Detection The engine scans for consecutive same-direction candles (configurable from 2 to 5) that confirm a strong directional impulse At least one candle in the sequence must have above-average volume (measured against a configurable Volume SMA) This combination of directional conviction plus volume commitment identifies moves driven by institutional participation, not retail noise Step 2 — Origin Candle Identification Once an impulse is detected, the engine looks back up to 6 bars (configurable) for the origin candle — the opposite-color candle where the move started For supply zones, this is the last bullish candle before the bearish impulse — the level where sellers overwhelmed buyers For demand zones, this is the last bearish candle before the bullish impulse — the level where buyers overwhelmed sellers The origin candle's high and low define the zone boundaries, expanded by an ATR-based padding for robustness Step 3 — Volume Delta Calculation During the origin-to-impulse sequence, the engine calculates the net volume delta — total buying volume minus total selling volume This delta is displayed on each zone and used in the strength scoring system A large negative delta on a supply zone confirms strong selling pressure at that level A large positive delta on a demand zone confirms strong buying pressure at that level Fresh zones appear with bold borders and bright colors. As they get tested, they visually degrade — giving you an instant read on zone quality without checking any numbers. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📊 Six Core Features AlphaX Order Blocks combines six independent analysis layers into a single cohesive system: 1 ─ Supply Zones (Red Boxes) Supply zones mark price levels where institutional selling originated. Each zone box displays: Tier Rating — S, A, B, or C based on the 6-factor strength score Touch Count — How many times price has tested this zone (×0, ×1, ×2, etc.) Volume Delta — Net selling pressure at the zone origin Strength Percentage — The composite score from 0 to 100 Visual styling degrades automatically as zones weaken: Fresh (0 touches) — Bold solid border, bright color, full opacity Tested (1 touch) — Solid border, slightly reduced opacity Multi-tested (2+ touches) — Dashed border, reduced opacity Weak (max touches reached) — Dotted border, heavily faded — zone is nearly exhausted ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2 ─ Demand Zones (Green Boxes) Demand zones following the same tier/touch/delta/strength display format Demand zones mark price levels where institutional buying originated. They follow the identical visual degradation system as supply zones but in the green color family. Green Bold Box — Fresh, untested demand zone with highest reaction probability Green Dashed Box — Tested zone, still valid but weakening Green Dotted Box — Heavily tested zone, likely to break on next visit ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3 ─ Flip Zone Detection (Purple Boxes) One of the most powerful concepts in institutional trading is polarity reversal — when a broken support level becomes resistance, or a broken resistance level becomes support. AlphaX Order Blocks automates this: When price closes above a supply zone, the zone is deleted and a new demand zone is created at the same level with a purple color When price closes below a demand zone, the zone is deleted and a new supply zone is created at the same level with a purple color Flip zones receive a +10 point bonus in the strength scoring system because institutional traders frequently use broken levels as new entry points This feature can be toggled on/off independently ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4 ─ Confidence-Scored Entry Signals (▲ / ▼) Entry signal labels with S/A/B tier classification and strength percentage When price enters a high-quality zone and produces a confirmation candle, the signal engine fires a scored entry: ▲ Green Label (Demand Signal) — Dark text on green background. Price entered a demand zone and closed with a bullish candle. ▼ Red Label (Supply Signal) — White text on red background. Price entered a supply zone and closed with a bearish candle. Signals only fire when the zone's strength score meets your configured minimum threshold (default 40%). This prevents signals at weak, over-tested zones. Each signal is classified into tiers: S-Tier (75%+) — Highest probability. Fresh zone, high volume, strong departure, EMA confluence. A-Tier (55–74%) — High probability. Most factors aligned. B-Tier (40–54%) — Moderate probability. Basic conditions met. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 5 ─ Risk/Reward Projection Dotted projection lines from entry to nearest opposite zone with R:R ratio displayed When an entry signal fires, the system automatically projects a take-profit target to the nearest opposite zone : Demand signal → Target projects to the nearest supply zone above Supply signal → Target projects to the nearest demand zone below The R:R ratio is calculated and displayed (e.g., "TP 2.3R") This gives you an instant read on whether the trade offers sufficient reward relative to risk ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 6 ─ Proximity Warnings Orange warning label appearing when price approaches a zone — time to prepare The proximity engine continuously monitors the distance between current price and all active zones. When price comes within the configurable ATR distance of a zone: An orange ⚠ warning label appears showing the zone type and distance percentage This gives you advance notice to prepare for a potential reaction — set alerts, tighten stops, or prepare entries Works for both supply zones above and demand zones below ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🧠 6-Factor Zone Strength Scoring Every zone is continuously scored from 0 to 100 based on six independent factors. This score determines the tier rating, visual styling, and signal eligibility. Freshness — Untested Zones Score Highest (up to 25 points) 0 touches = 25 points — Fresh zone, never tested, highest probability 1 touch = 18 points — Tested once, still strong 2 touches = 10 points — Multi-tested, weakening 3 touches = 4 points — Nearly exhausted 4+ touches = 0 points — Weak zone, likely to break Volume at Origin (up to 20 points) Compares the volume at the origin candle to the volume SMA Volume ratio > 3.0× = 20 points (institutional-grade volume) Volume ratio > 2.0× = 16 points Volume ratio > 1.5× = 12 points Volume ratio > 1.0× = 7 points (above average) Departure Velocity (up to 20 points) Measures how aggressively price left the zone (in ATR units) Fast departures indicate strong institutional commitment — they want to get filled and move price away quickly Velocity > 3 ATR = 20 points Velocity > 2 ATR = 15 points Velocity > 1 ATR = 10 points Zone Age (up to 15 points) Younger zones score higher — they are more relevant to current market conditions Under 20 bars old = 15 points Under 50 bars old = 12 points Under 100 bars old = 8 points Under 200 bars old = 4 points Over 200 bars old = 1 point EMA Confluence (up to 10 points) Demand zones score higher when price is below the 200 EMA (buying into weakness) Supply zones score higher when price is above the 200 EMA (selling into strength) This adds structural trend context to zone quality Flip Zone Bonus (up to 10 points) Zones created from polarity reversal receive a flat 10-point bonus Broken support becoming resistance (or vice versa) is one of the most reliable patterns in institutional trading ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📐 Dashboard Intelligence A comprehensive AlphaX-branded dashboard provides real-time zone analytics organized into four sections: Zone Inventory Active supply and demand zone counts Breakdown by status: F (Fresh), T (Tested), W (Weak) Total flip zone count Market Bias Strength-weighted zone bias — shows whether demand or supply zones dominate the current price area EMA trend direction (Strong Bull / Bull / Bear / Strong Bear / Cross) RSI with zone classification (OB / OS / HIGH / LOW / MID) Nearest Zones Nearest supply zone above current price — with price level, strength score, and distance percentage Nearest demand zone below current price — with price level, strength score, and distance percentage Position indicator — shows whether price is closer to supply or demand Signal Status Last signal type and how many bars ago it fired Current volume status relative to the SMA (Spike / High / Normal / Dry) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🚀 How to Trade with AlphaX Order Blocks — Step by Step Step 1 — Identify the Zone Landscape Look at the chart for active supply (red) and demand (green) zones Check the Dashboard: Which zones are fresh (F)? Which are tested (T)? Note any purple flip zones — these are high-probability levels Step 2 — Wait for Price to Approach a Zone When the ⚠ proximity warning appears, prepare for a potential reaction Check the zone's tier rating — S and A tier zones have the highest reaction probability Ignore C-tier zones unless other confluence is present Complete trade flow: Zone detection → Proximity warning → Price enters zone → Entry signal → Risk/Reward projection Step 3 — Enter on Confirmed Signal Wait for a scored entry label (▲ or ▼) to appear Confirm the tier — S-Tier and A-Tier signals have the highest probability Place your stop loss beyond the opposite side of the zone Step 4 — Set Target Using R:R Projection The system automatically projects a dotted line to the nearest opposite zone The R:R ratio is displayed — only take trades offering at least 1.5R or better Use the projected target as your primary take-profit level Step 5 — Monitor Zone Degradation If you are in a trade and the target zone changes from solid to dashed border, it may break — consider tightening your take-profit If your entry zone starts getting tested from the wrong side, the thesis may be failing — consider a stop adjustment Step 6 — Understand Zone Breaks When a zone breaks (candle closes through it), the zone is automatically deleted If flip detection is enabled, a new opposite zone appears at the same level Zone breaks often indicate a change in institutional bias — respect them ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠ When NOT to Trade — Zone Quality Filters Not all zones are created equal. AlphaX Order Blocks gives you clear visual and numerical cues to avoid low-quality setups: Avoid these conditions: C-Tier zones only — If no S, A, or B tier zones are near price, the area lacks institutional interest All zones heavily tested — If every zone shows ×3 or ×4 touches with dashed/dotted borders, the levels are exhausted Dashboard shows "BALANCED" bias — When supply and demand strength are equal, there is no clear institutional edge Volume shows "DRY" — Low volume environments produce unreliable zone reactions Multiple flip zones clustered — Heavy flip activity indicates a choppy, indecisive market where zones break frequently What to do: Wait for new fresh zones to form with strong volume Look for zones where the departure velocity was high (the market left aggressively) Switch to a higher timeframe to find larger, more significant zones Only trade zones that align with the EMA trend direction ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚡ Key Features 🔬 Institutional zone detection using consecutive impulse candles + volume confirmation 🏗 6-factor zone strength scoring (freshness, volume, velocity, age, EMA, flip) 🏷 S/A/B/C tier zone classification with readable labels and strength percentages 👆 Multi-touch tracking with automatic visual degradation (solid → dashed → dotted → faded) 🔄 Automatic flip zone detection — broken supply becomes demand and vice versa (purple zones) ▲▼ Confidence-scored entry signals at high-quality zone reactions 📐 Risk/Reward auto-projection to nearest opposite zone with R:R ratio ⚠ Proximity warnings when price approaches active zones 📊 EMA confluence scoring — zones aligned with trend structure score higher 📈 Comprehensive AlphaX-branded dashboard — zone inventory, market bias, nearest zones, signal status 🎨 Cohesive triple-tone color theme — Green for demand, Red for supply, Purple for flip zones 🔔 15+ alert conditions — zone detection, touches, signals by tier, and combined ⚙ Fully configurable — detection sensitivity, zone behavior, scoring weights, and all visuals ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚙ Settings Reference Zone Detection Consecutive Candles Required — Number of same-direction candles for impulse detection (default: 3) Origin Candle Lookback — How far back to search for the origin candle (default: 6) Volume Threshold Multiplier — Volume must exceed SMA × this value (default: 1.0) Volume SMA Length — Baseline period for volume comparison (default: 50) Zone Height (ATR Multiple) — Controls the vertical thickness of zone boxes (default: 1.5) Max Active Zones Per Side — Cap on simultaneous supply and demand zones (default: 8) Zone Cooldown — Minimum bars between new zones of the same type (default: 10) Zone Behavior Max Touches Before Weak — After this many tests, zone is visually degraded (default: 4) Require Close to Break Zone — Prevents wick-through fake breaks (default: enabled) Detect Flip Zones — Enable/disable polarity reversal detection (default: enabled) Confluence Fast EMA Period — Short-term trend reference (default: 21) Slow EMA Period — Long-term structural reference (default: 200) Show EMAs — Toggle EMA plot visibility Use EMA Confluence in Scoring — Add/remove EMA from strength calculation Signals Show Entry Signals — Toggle entry labels Min Zone Strength for Signal — Minimum score required (default: 40%) Signal Cooldown — Minimum bars between signals (default: 5) Show Proximity Warnings — Toggle approach alerts Proximity Distance — How close price must be to trigger warning (default: 1.5 ATR) Risk/Reward Show Risk/Reward Projection — Toggle the dotted target line and R:R label Dashboard Show Dashboard — Toggle the information panel Position — Top Left, Top Right, Bottom Left, Bottom Right Dashboard Text Size — Tiny, Small, Normal Colors Bull / Demand Primary / Bright / Dim — Green family for demand zones Bear / Supply Primary / Bright / Dim — Red family for supply zones Flip Zone — Purple for polarity-reversed zones Proximity Warning — Orange for approach alerts Neutral / Neutral Light — Gray for structural elements ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔔 Alert Conditions New Supply Zone Detected — Fires when a fresh supply zone is created New Demand Zone Detected — Fires when a fresh demand zone is created Supply Zone Touched — Fires when price enters a supply zone Demand Zone Touched — Fires when price enters a demand zone S/A/B-Tier Demand Signal — Confidence-based demand entry alerts S/A/B-Tier Supply Signal — Confidence-based supply entry alerts Any Demand / Supply / Zone Signal — Combined alert conditions All alert messages include {{ticker}} and {{interval}} placeholders for clean webhook integration. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🎯 Default Settings — Optimized For The default configuration is tuned for XAUUSD (Gold), major forex pairs, and indices on the 5-minute to 1-hour timeframes : 3 consecutive candles strikes the balance between sensitivity and reliability Volume multiplier at 1.0× captures most institutional moves without over-filtering Zone cooldown at 10 bars prevents cluster creation in volatile periods Max 4 touches before weak aligns with institutional order absorption theory EMA confluence enabled for trend-aligned zone scoring For other instruments or timeframes, adjust: Higher timeframes (4H, Daily) — Increase Origin Lookback to 8–10, increase Zone Height to 2.0+ ATR Scalping (1m, 5m) — Reduce Consecutive Candles to 2, reduce Cooldown to 5–7 bars Crypto — Increase Zone Height to 2.0–3.0 ATR (higher volatility), increase Volume Multiplier to 1.5× Forex majors — Use defaults, optionally reduce Volume Multiplier to 0.8× for pairs with lower tick volume Cleaner zones — Increase Consecutive Candles to 4–5, increase Volume Multiplier to 1.5× More zones — Decrease Consecutive Candles to 2, decrease Volume Multiplier to 0.7×, increase Max Zones ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 👥 Who This Is For 🏛 Institutional/Smart Money Traders — Designed to identify where large orders originated and where unfilled orders may remain 📐 Supply & Demand Traders — Automated zone detection with strength scoring replaces manual drawing 🥇 Gold & Forex Traders — Tuned for assets with clear institutional participation patterns 🧠 Systematic Traders — The 6-factor scoring system provides a quantitative framework for zone quality assessment 📊 Breakout Traders — Flip zone detection automatically identifies broken levels as new opportunity zones 📈 Traders who value clean charts — No clutter. Zones auto-degrade and auto-remove. Only relevant levels remain. ⚠ Traders who struggle with zone selection — The tier system physically tells you which zones are worth trading and which to ignore ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📝 Notes All zone detections are confirmed on bar close — zones do not repaint or move after creation Zone break confirmation uses candle close by default (not wicks) to prevent fake-outs — this can be toggled off for aggressive trading Flip zones inherit a reduced departure velocity (70% of original) to account for diminished institutional interest at reversed levels Volume delta uses candle direction (close vs open) as a proxy for buy/sell pressure — this is an approximation, not true order flow Dashboard updates on the last bar only for performance optimization Maximum 500 boxes, 500 labels, and 500 lines are used — on very low timeframes with extended history, oldest drawings may be automatically removed by TradingView's rendering limits Overlapping zone prevention runs at creation time — if a new zone would overlap an existing one of the same type, it is not created ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠ Disclaimer This indicator is a technical analysis and visualization tool intended for educational and informational purposes only. It does not constitute financial advice or a recommendation to buy or sell any financial instrument. All signals and zone detections are generated from historical and real-time price data using mathematical calculations — their accuracy or profitability is not guaranteed. Supply and demand zones represent areas of historical interest, not guaranteed future reaction points. Past zone behavior does not guarantee future price reactions. Always conduct your own analysis, use proper risk management, and consult a licensed financial advisor before making any trading decisions. The author accepts no responsibility for any losses incurred from the use of this indicator. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Built for traders who demand clarity, confidence, and precision from their charts.
Indicador Pine Script®
por AlphaX-Trade
Trader in War(By Vahid.Jz)IR EnTrader in War (By Vahid.Jz) IR - Professional Trading Assistant 🎉 The first Persian indicator on TradingView, released for free to celebrate my daughter's (Atena / Avina) birthday. 🎉 First in corona, next in war... Trading Assistant (by Vahid.Jz) is an all-in-one professional tool designed to simplify market analysis and improve trading accuracy. It serves as an intelligent trading companion. Key Features: Advanced Market Structure Analysis Multi-Timeframe “Third Eye” Trend Overview Professional Order Blocks (Supply & Demand) Detection Fair Value Gaps (FVG) Identification Powerful Divergence Detector Neo Elliott Wave Labeling Highly Customizable Alerts System Sections & Inputs Guide: 1. Trading Assistant (Range / Consolidation Zones) Main activation switch. When turned on, it enables all visual signals, labels, and alerts. Optimized especially for range-bound and consolidation markets. 2. Market Structure Mid-term: Controls swing-level structure display (All, Shift, Sharp Shift, Momentum, None). Short-term / Range Zones: Manages internal structure behavior. Third Eye: Shows market structure trend direction (Bullish or Bearish) across 7 timeframes (5m to 1W). 3. Order Blocks (Supply / Demand) Show Max Zones: Sets the maximum number of visible Order Blocks. Show Strongest Zones Only: Displays only the highest volume percentage zones. Timeframe: Selects the calculation timeframe for Order Blocks. Text Size: Adjusts the size of volume text on the zones. 4. Unfilled Gaps (FVG) Hidden Gaps: Enables display of hidden Fair Value Gaps. Timeframe: Selects the timeframe used for FVG detection. Max Gaps: Maximum number of gaps to keep on the chart. Max Gap Range: Maximum bar distance for valid gaps. 5. Advanced Ichimoku Activates the enhanced Ichimoku Cloud with multi-timeframe capability, including Tenkan-sen, Kijun-sen, Chikou Span, and Senkou Spans. 6. Neo Elliott Waves Show Wave Labeling: Automatically detects and labels Elliott Wave patterns (a, b, c). Show Invalid Waves: Option to display broken or invalidated wave structures. 7. Divergence Detector Advanced divergence detection using multiple oscillators. Includes several signal types: Custom Divergence, Volume Divergence, Hidden Gap Divergence, Divergence in Trend, and Inverse Trend Divergence. 8. Smart Signals Section for enabling and filtering different signal combinations with confirmation options (Ichimoku Cloud or Tenkan/Kijun). 9. Alerts Fully customizable alert system covering structure changes, Order Block touches, strongest zones, Fair Value Gaps, and Elliott Wave detections. Developed with love by Vahid.Jz — Trader and Pine Script enthusiast with over 10 years of real-market experience. “Trading is not a destination; it’s the journey — a path of learning, growth, and experience.” Final Message: If this indicator helps you trade better and protects you from losses, please share it with your friends and fellow traders. The more people use professional tools, the fewer losses they will suffer in the market. Your support and sharing motivate me to release more hidden and powerful versions in the future. Thank you for being part of this journey.
Indicador Pine Script®
por Kobewong1
Triple Derivative EngineMost momentum indicators tell you where the price is. The Triple Derivative Engine tells you how fast it's getting there, whether that speed is increasing or fading, and whether the acceleration itself is changing direction — three layers of motion analysis extracted from a single smoothed price signal, all normalized to a common ±100 scale so every layer is directly comparable at a glance. How It Works Step 1 — Smoothing Raw price is too noisy to differentiate reliably. TDE first passes your source through one of three selectable filters to extract the underlying motion curve before computing any derivatives. Savitzky-Golay (default) fits a 2nd-order polynomial to a moving window of bars using Gram polynomial coefficients. Unlike a moving average, it preserves the shape of peaks and troughs rather than smoothing them away. Window sizes of 5, 7, 9, 11, 13, and 15 are supported, each with exact integer coefficients — no approximation. This gives the best phase response of the three filters: signals appear earlier and with less distortion. Gaussian weights each past bar by a bell-curve function of its distance from the current bar. Sigma controls how quickly the weights fall off. Softer and more trailing than SG, useful when you want a cleaner curve at the cost of a slight lag. Kalman is a single-state recursive filter that continuously estimates the "true" price by balancing how much it trusts the new measurement (R) versus how much the underlying process is expected to move (Q). It adapts bar-to-bar, making it the most responsive of the three with the least lag, but also the most sensitive to sharp moves. Step 2 — Finite Difference Derivatives Once the smoothed signal sm is computed, three derivatives are calculated using standard finite difference formulas: Velocity (1st derivative): sm − sm — the rate of change of price. Positive means price is rising, negative means it is falling. The magnitude tells you how fast. Acceleration (2nd derivative): sm − 2·sm + sm — the rate of change of velocity. Positive means momentum is building; negative means it is fading, even if price is still moving in the same direction. Jerk (3rd derivative): sm − 3·sm + 3·sm − sm — the rate of change of acceleration. A leading indicator of acceleration reversals. When jerk crosses zero, acceleration is about to change direction. Step 3 — Normalization Each derivative is divided by its rolling peak absolute value over the normalization lookback window, then scaled to ±100. This keeps all three series on the same axis and comparable to each other, regardless of the instrument's price level or volatility. A velocity reading of +80 and an acceleration reading of +80 carry equivalent relative meaning within their own histories. Signals Zero Crosses Every time a derivative crosses the zero line, a marker appears at the top or bottom of the panel. Each derivative has a distinct shape to avoid confusion: Velocity (Circle): Bottom (bullish) / Top (bearish) Acceleration (Diamond): Bottom (bullish) / Top (bearish) Jerk (Square): Bottom (bullish) / Top (bearish) Each set of markers is independently gated by its visibility toggle, so you only see the crosses for the series you have enabled. Velocity cross — the most direct signal. When velocity crosses above zero, price momentum has turned positive on the source timeframe. Below zero, it has turned negative. Acceleration cross — a timing tool, not a trend signal. When acceleration crosses above zero while velocity is still positive, the move is re-accelerating. When acceleration crosses below zero while velocity is still positive, the move is losing steam — the trend continues, but is starting to exhaust. Acceleration reversals frequently precede velocity reversals by several bars. Jerk cross — the earliest signal in the chain. Jerk crossing zero means acceleration is about to change direction. By itself, jerk is noisy, but when it aligns with acceleration near a zero cross, it can give a meaningful early warning. Divergence Markers (Triangles) Divergence fires when acceleration crosses zero while velocity is still extreme — specifically when |vn| > 30. This combination means the move has been strong enough to be considered extended, but the underlying force driving it is already reversing. Bear divergence (▼ triangle, top): Acceleration crosses below zero while velocity is still elevated above +30. The upswing's engine is cutting out while the price is still high. Historically, this precedes deceleration into a stall or reversal. Bull divergence (▲ triangle, bottom): Acceleration crosses above zero while velocity is still depressed below −30. The downswing is losing power from the bottom. Historically, this precedes a deceleration of selling and a potential recovery. Divergence markers are rarer than zero crosses by design. They represent a specific confluence, not a general crossover signal. Regime Background The panel background is tinted to reflect the current momentum regime: Velocity > 0 and Acceleration > 0: Accelerating bull - Cyan tint Velocity < 0 and Acceleration < 0: Accelerating bear - Red tint No tint: Decelerating or mixed - Neutral The regime is also displayed in the info table with four states: ▲ Accelerating, ↗ Decelerating, ↘ Recovering, ▼ Falling. Signal Line An EMA of velocity (default length 9) is plotted as a thin white line over the velocity histogram. Velocity crossing its own signal line is an additional early entry cue, analogous to the MACD signal cross but applied directly to the derivative layer. Settings ⏱ Timeframe Source Timeframe — the timeframe on which the smoothed signal is computed before derivatives are taken. Options: Auto, Chart, 5m, 15m, 1H, 4H, 1D, 1W. Auto scales to a fixed higher timeframe based on your current chart: below 5m → 15m, below 15m → 1H, below 1H → 4H, below 4H → 1D, otherwise 1W. This allows the indicator to show higher-timeframe derivative structure on any intraday chart without manual adjustment. The chart uses the same timeframe as the chart is on. Useful when you want the derivatives of the chart's own bars rather than a higher context. 🔬 Smoothing Filter Filter — selects the smoothing method: Savitzky-Golay (recommended), Gaussian, or Kalman. SG Window (SG only) — odd integer from 5 to 15. Controls the width of the polynomial fitting window. Larger windows produce smoother derivatives with (window−1)/2 additional bars of lag. Window 9 is the default and a good general-purpose choice. Use 5 or 7 for faster signals on volatile instruments; 13 or 15 for cleaner derivatives on smooth trends. Gaussian Length (Gaussian only) — number of bars in the weighted sum. Longer = smoother. Gaussian Sigma (Gaussian only) — controls the standard deviation of the bell curve. Lower values concentrate weight on recent bars; higher values spread it more evenly. Kalman Q — Process Noise (Kalman only) — how much the filter expects the price to move on its own each bar. Higher Q makes the filter track price more closely with less smoothing. Range 0.0001–1.0, default 0.01. Kalman R — Measurement Noise (Kalman only) — how much the filter distrusts the raw price measurement. Higher R produces more smoothing and more lag. Range 0.01–50.0, default 1.0. 📈 Derivatives & Display Price Source — the input series to smooth and differentiate. Defaults to close. Can be set to any source, including hl2, ohlc4, or another indicator's output via the source selector. Normalization Lookback — the rolling window (in bars) over which each derivative is scaled to ±100. Shorter windows (e.g., 50) make the indicator more responsive to recent extremes; longer windows (e.g., 200–500) provide a more stable baseline. Default 100. Signal EMA Length — the length of the EMA applied to normalized velocity to produce the signal line. Default 9. Velocity (1st deriv) — show/hide the velocity histogram and line, and its zero-crossing markers. Acceleration (2nd deriv) — show/hide the acceleration line and its zero-cross diamond markers. Jerk (3rd deriv) — show/hide the jerk line and its zero-crossing square markers. Hidden by default as it is primarily useful for advanced analysis. Signal Line on Velocity — show/hide the EMA signal line overlay on velocity. Divergence Markers — show/hide the bear/bull divergence triangle markers. 🎨 Colors All seven colour elements are individually configurable: Velocity (up/down), Acceleration (up/down), Jerk (up/down), and the Signal line. Alerts Eight alert conditions are available: Velocity → Positive: Velocity crosses above zero Velocity → Negative: Velocity crosses below zero Momentum Trough: Acceleration crosses above zero Momentum Peak: Acceleration crosses below zero Jerk → Positive: Jerk crosses above zero Jerk → Negative: Jerk crosses below zero Bullish Divergence: Acceleration recovers while velocity is below −30 Bearish Divergence: Acceleration rolls over while velocity is above +30 Reading the Indicator Together The three layers are designed to be read in sequence, from slowest to fastest signal: Check velocity for trend direction — is the move positive or negative? Check acceleration for conviction — is the move building or fading? Check jerk for early warning — is acceleration about to change? A high-confidence setup aligns all three: velocity positive, acceleration positive and rising, jerk positive. As a move matures, acceleration will peak and roll over first, while velocity remains elevated — that is the divergence condition. Velocity eventually follows. Jerk will often signal the peak of acceleration one step earlier still. No single cross is a trade signal on its own. TDE is a momentum structure tool. It is most useful when combined with price structure, support/resistance levels, and a defined higher timeframe bias.
Indicador Pine Script®
por Azazel_Trading
Exponential Hull Momentum [BackQuant]Exponential Hull Momentum Overview Exponential Hull Momentum is a normalized momentum oscillator built from an Exponential Hull Moving Average -style transformation. Its purpose is to measure whether smoothed directional pressure is pushing toward the upper or lower end of its own recent range, while keeping the response faster and cleaner than a plain moving-average oscillator. At a high level, the script does three things: Builds a fast, low-lag smoothed series using an Exponential Hull-style calculation. Normalizes that series against its own rolling high-low range so the output fits into a bounded oscillator-style scale centered around zero. Optionally smooths the oscillator with a selectable moving average so you can use a secondary signal line or regime filter. The final result is an oscillator that tries to answer: Is momentum pushing toward the strong positive end of its recent range? Is momentum collapsing toward the negative end? Is the current move still expanding, or is it rolling over relative to its own smoothed state? What this indicator is actually measuring This indicator is not measuring raw returns, not measuring RSI-style up/down closes, and not measuring volatility. It is measuring the position of a low-lag smoothed price transform within its own recent rolling range . That distinction matters. It means: Positive values indicate the Exponential Hull series is in the upper half of its recent normalized range. Negative values indicate it is in the lower half of its recent normalized range. Extreme positive values suggest strong upward momentum persistence. Extreme negative values suggest strong downward momentum persistence. Because it is normalized, the oscillator is less about absolute price level and more about relative momentum state . Where the “Hull” idea comes from The Hull Moving Average family exists to solve a classic moving-average problem: If you smooth more, you reduce noise but increase lag. If you smooth less, you reduce lag but increase noise. Alan Hull’s core idea was to combine moving averages in a way that compensates for lag before applying a final smoothing stage. The classic HMA uses weighted moving averages. This script uses the same structural idea, but with EMAs instead , producing an Exponential Hull-style moving average . So instead of a classic HMA, the script constructs: A fast EMA on half-length input. A slower EMA on full-length input. A lag-compensated intermediate value using 2 * fast - slow. A final EMA smoothing pass using sqrt(length). This is why it is called Exponential Hull Momentum . The “Hull” part refers to the lag-reduction structure, the “Exponential” part comes from using EMA instead of WMA. The EHMA calculation step by step The core function is: EHMA(_src, _length) = EMA( 2 * EMA(_src, _length / 2) - EMA(_src, _length), round(sqrt(_length)) ) Let’s break that down. 1) Fast EMA on half length EMA(_src, _length / 2) This reacts quickly to recent price changes. 2) Slow EMA on full length EMA(_src, _length) This is smoother and more delayed. 3) Lag compensation 2 * fastEMA - slowEMA This is the critical step. It pushes the result toward the faster average while subtracting part of the slower lagging component. Conceptually, it behaves like a “de-lagged” smoother. It is related in spirit to reduced-lag constructions like DEMA and TEMA, though implemented in a Hull-style framework. 4) Final smoothing EMA(lag_compensated_series, sqrt(length)) This final pass cleans up the compensated series so it remains usable as a smooth momentum engine rather than a noisy de-lagged line. So the oscillator’s underlying subject is not raw price, but this EHMA subject series . Why use EHMA instead of a plain EMA or raw price A raw price oscillator is often too noisy. A plain EMA oscillator is smoother, but can still lag too much. EHMA tries to balance: Faster reaction than a standard EMA. Cleaner shape than a raw de-lagged transform. More sensitivity to directional bursts. That makes it useful for momentum work, especially when you want: Earlier momentum regime shifts. Cleaner trend-state transitions. A bounded oscillator rather than an overlay line. Normalization: turning the EHMA into an oscillator After computing the EHMA subject, the script normalizes it using its own rolling lowest and highest values over a user-defined normalization period: lowest = lowest(subject, norm_period) highest = highest(subject, norm_period) plotosc = (subject - lowest) / (highest - lowest) - 0.50 This transforms the EHMA series into a bounded range centered around zero. Interpretation: If subject is near the rolling highest, plotosc approaches +0.5. If subject is near the rolling lowest, plotosc approaches -0.5. If subject is near the middle of the rolling range, plotosc is near 0. So the oscillator is essentially: Where is the current EHMA value sitting within its recent high-low envelope? Why normalization matters Without normalization, the EHMA value itself would still be in price units, which makes comparison harder across: Different assets, Different timeframes, Different price regimes. Normalization gives you a common scale: -0.5 to +0.5, centered at 0 That makes the output much easier to use as a momentum state tool. What the oscillator values mean Near +0.5 The EHMA subject is pressing against the upper end of its rolling range. This usually means: Strong bullish momentum, Persistent upward movement in the smoothed series, A possible “stretched” positive momentum condition. Near -0.5 The EHMA subject is pressing against the lower end of its rolling range. This usually means: Strong bearish momentum, Persistent downward movement, A possible stretched downside state. Near 0 The EHMA subject is near the midpoint of its recent range. This can mean: Momentum is neutral, Momentum is transitioning, The market is compressing or chopping relative to recent structure. Important nuance about the oscillator scale This is not a z-score . It is not measuring “standard deviations from mean.” It is a min-max style range normalization . That means: The output depends on the recent highest and lowest subject values. If the rolling range changes sharply, oscillator sensitivity can change too. The same oscillator value does not imply the same statistical rarity across all contexts. It is best read as a relative range-position momentum oscillator , not as a probabilistic metric. Signal line / moving average layer The script optionally applies a second smoothing layer directly to the oscillator: sig_ma = MA(plotosc, malen, matype) You can choose from many MA types: SMA EMA DEMA TEMA RMA WMA HMA T3 ALMA LINREG VWMA This signal line is not required for the core oscillator to work. It is a secondary interpretation layer that can be used for: Momentum confirmation, Cross-based entry logic, Smoothing out the oscillator for regime filtering, Visual comparison between raw momentum and smoothed momentum. The script note suggests that if you want to use the MA more like a signal histogram, you can change its style to columns in the style menu. Why a selectable MA matters Different traders want different signal characteristics: SMA/EMA for classic smoothing, DEMA/TEMA for lower lag, HMA/T3/ALMA for smoother trend-state filtering, LINREG for slope-sensitive behavior, VWMA if you want volume-weighted smoothing. This makes the indicator more flexible without changing the core EHMA oscillator. Color gradient logic The oscillator columns are colored using thresholded intensity zones rather than a continuous gradient function. The color changes as the oscillator moves further away from zero. For positive values: Weak positive: lighter cyan/green tones. Moderate positive: stronger green. Strong positive: bright green. Extreme positive near +0.5: intense bright green. For negative values: Weak negative: orange/red tint. Moderate negative: deeper red. Strong negative: bright red. Extreme negative near -0.5: intense red. This means the plot does two jobs at once: Direction from sign, Relative momentum intensity from color saturation. So even without reading the value numerically, you can see whether momentum is: Barely positive, Strongly positive, Barely negative, Or deeply negative. Static levels and what they mean The script draws fixed zones: +0.5 and +0.4 -0.4 and -0.5 0 midline These create: An upper “overbought / strong positive momentum” zone from 0.4 to 0.5 A lower “oversold / strong negative momentum” zone from -0.4 to -0.5 A midline at 0 separating positive from negative momentum territory Important: These are momentum extreme zones , not traditional RSI overbought/oversold zones. Strong trends can stay pinned near +0.5 or -0.5 for long periods. Extreme readings do not automatically mean reversal. The fill between the upper and lower static boundaries just makes those zones easier to identify visually. Midline logic The zero line is the most important structural level in the oscillator: Above 0 = EHMA is in the upper half of its recent range, positive momentum regime. Below 0 = EHMA is in the lower half of its recent range, negative momentum regime. The alert conditions are built on this exact logic: Long alert on crossover above 0 Short alert on crossunder below 0 So the core directional interpretation is midline-based. How to interpret the indicator in practice 1) Momentum regime The cleanest use is as a regime filter: Above 0: positive momentum bias. Below 0: negative momentum bias. This alone can already be useful for: Filtering entries, Avoiding countertrend setups, Aligning with the dominant smoothed momentum state. 2) Momentum intensity The closer the oscillator moves toward +0.5 or -0.5, the stronger the recent momentum relative to its own normalized range. This can help distinguish: Weak trend drift, Healthy trend continuation, Momentum surge / expansion, Potential exhaustion zones. 3) Transition behavior Watch how the oscillator behaves around 0: Fast thrust through 0 often signals a fresh momentum shift. Repeated chop around 0 often signals indecision or sideways conditions. A flattening oscillator after an extreme reading often shows momentum deterioration before price fully turns. 4) Using the moving average signal If enabled, the MA of the oscillator can help identify: When raw momentum is accelerating away from smoothed momentum, When momentum is rolling over, Whether the oscillator move is broad and sustained or only a short burst. A common interpretation: Oscillator above signal MA and above zero = strong bullish momentum structure. Oscillator below signal MA and below zero = strong bearish momentum structure. Divergence between oscillator and signal MA = momentum fading or transitioning. What makes this different from RSI or stochastic-style oscillators This script is structurally different from standard oscillators. Compared to RSI RSI is based on the ratio of average up closes to down closes. It measures directional internal strength of return behavior. EHMA Momentum instead: Starts from a low-lag smoothed price transform, Then asks where that transform sits in its recent range. So it is more “structure-relative momentum” than “up/down return balance.” Compared to Stochastic Stochastic asks where price closes relative to recent high-low range. EHMA Momentum asks where the EHMA-smoothed subject sits relative to its own recent subject range. That means: It is less raw than stochastic, More smoothed, Potentially less noisy, And more focused on directional structure than candle location. Parameter behavior Exponential Hull Calculation Period (len) Controls how the EHMA subject is built. Very low values make the subject extremely reactive. Higher values smooth the subject more and reduce sensitivity. Since the default is very small, this script is designed to be sharp and responsive by nature. Normalization Period (norm_period) Controls the rolling high-low range used to normalize the subject. Higher values create a broader historical range and smoother normalization. Lower values make the oscillator adapt faster, but it can become more jumpy and “range-reset” more often. Signal MA Period and Type Controls how smooth the optional secondary line is. Shorter MA = faster cross behavior. Longer MA = slower, steadier confirmation. Strengths of this approach Fast response because of the Exponential Hull construction. Easy interpretation because of bounded normalized output. Works well as a regime filter via the zero line. Intensity is visually clear from both height and color. Flexible because of optional multi-type signal smoothing. Limitations and what to watch for Because the oscillator is min-max normalized, extreme values can persist in strong trends. A rolling highest/lowest normalization can make the oscillator “reset” as old extremes leave the window. On very low lengths, the EHMA can become highly reactive and potentially noisy. Zero-line crosses can whipsaw in sideways markets, especially if normalization is too short. So this tool is best used with context: Trend structure, Market regime, Higher timeframe bias, Or combined with the signal MA and price action. Summary Exponential Hull Momentum is a normalized momentum oscillator built from an EMA-based Hull-style smoothing engine. It first creates a low-lag Exponential Hull series, then normalizes that series within its own rolling high-low range so the output oscillates around zero between roughly -0.5 and +0.5. Positive values indicate the EHMA subject is pressing into the upper half of its recent range, negative values indicate the lower half, and the distance from zero reflects relative momentum strength. Static zones highlight extreme positive and negative momentum states, while an optional multi-type moving average can be used as a secondary signal or smoothing layer.
Indicador Pine Script®
por BackQuant
S/R Breakout Strategy LONG ONLY S/R Breakout Strategy is a long-only trend-following strategy that enters positions when price breaks above a confirmed resistance level. It features independent take-profit management per trade, a built-in cooldown mechanism, and a multi-timeframe SMA filter to ensure trades align with the broader market trend. This strategy is designed for traders who prefer systematic breakout entries with strict risk controls and the ability to manage multiple positions simultaneously. 🔧 Key Features 1. Support & Resistance Breakout Entry Identifies swing highs and swing lows using configurable left/right bar parameters. Enters a long position when price crosses above a confirmed resistance level. Validates that the channel width between support and resistance does not exceed a user-defined maximum percentage — ensuring entries occur only in reasonably tight ranges. 2. Independent Take Profit Per Trade Each trade has its own dynamically calculated take-profit level based on the entry price. Take profit is set as a percentage above entry, allowing consistent risk-to-reward structure across all positions. 3. Cooldown Mechanism Prevents consecutive entries immediately after a trade is opened. Configurable number of bars to wait before allowing a new entry — useful for avoiding overtrading in volatile conditions. 4. Multi-Timeframe SMA Filter Optionally uses an SMA (Simple Moving Average) on a higher or custom timeframe to filter entries. Ensures trades are taken only when price is above the SMA and beyond a minimum distance percentage — helping avoid trades against the dominant trend. 5. Position Management Limits the maximum number of concurrent open trades to control exposure. Allows pyramiding (multiple entries) with independent exits. 📈 How to Use 1. Add the strategy to your chart. 2. Configure the parameters according to your trading style and market conditions. 3. Enable or disable the SMA filter based on whether you want trend confirmation. 4. Backtest on your preferred symbols and timeframes to validate performance. Recommended use: This strategy works well on 3-4 minutes timeframe cooldown bars must be 50 or above
Estrategia Pine Script®
por One_punchcoin
[ A L P H A X ] Bollinger/Keltner Volatility Pressure SystemAlphaX Volatility Pressure System — Bollinger/Keltner Squeeze Detection, Linear Regression Forecast, Multi-Confluence Band Touch Signals, Volatility Regime Classification & Institutional Dashboard AlphaX Volatility Pressure System (VPS) is a professional-grade volatility analysis and signal system built on the interaction between Bollinger Bands and Keltner Channels — the foundation of squeeze-based trading. It combines a proprietary multi-layer squeeze engine, linear regression band forecasting, a six-factor confluence scoring system, and a comprehensive real-time dashboard into a single cohesive overlay. Designed and default-tuned for XAUUSD (Gold) on the 1-minute timeframe, fully adaptable to any instrument or timeframe. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📸 Visual Overview The indicator displays Bollinger Bands as a gradient cloud, Keltner Channel boundaries as dotted lines, squeeze status dots on the basis line, a projected forecast envelope extending into the future, confidence-scored entry signals at band touches, mean reversion exit markers, and a full diagnostic dashboard — all in a clean, non-cluttered layout with a consistent yellow-green / red / gray color theme. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔬 The Volatility Pressure Architecture — How It Works At the core of AlphaX VPS is the principle that volatility is cyclical — periods of compression (low volatility) are followed by periods of expansion (high volatility), and vice versa. The system detects exactly where you are in this cycle and provides actionable intelligence at every stage. The system operates through seven integrated layers: Layer 1 — Bollinger Bands (Volatility Envelope) A Simple Moving Average (SMA) basis line with standard deviation bands above and below Default: 30-period SMA with 2.2x multiplier — tuned for gold's micro-noise on 1-minute charts The bands expand during volatile moves and contract during consolidation Price touching or piercing the outer bands represents statistical extremes — potential reversal zones The space between upper and lower bands is rendered as a gradient cloud that shifts color based on price position relative to the basis — yellow-green when price is above basis (bullish pressure), red when below (bearish pressure) Layer 2 — Keltner Channels (ATR Volatility Wrapper) An Exponential Moving Average (EMA) center line with Average True Range (ATR) bands Default: 30-period EMA with 1.8x ATR multiplier using 20-period ATR — calibrated for gold Keltner Channels represent the "normal" volatility range based on true range, while Bollinger Bands represent statistical deviation — the relationship between them reveals compression and expansion states Plotted as subtle dotted lines at the channel boundaries for clean visual reference without chart clutter Layer 3 — Squeeze Engine Squeeze ON — detected when Bollinger Bands contract inside the Keltner Channel (BB upper < KC upper AND BB lower > KC lower). This means volatility has compressed below normal levels — a spring is being loaded Squeeze Release — the first bar where BB breaks back outside KC after a squeeze period. This is the explosive moment where the compressed energy releases into a directional move Squeeze status is displayed as colored dots on the BB basis line: red dots during active squeeze, yellow-green dots on squeeze release, gray dots during normal conditions Squeeze Momentum — a John Carter-style linear regression calculation determines the direction of the squeeze release: bullish momentum (price likely to break upward) or bearish momentum (price likely to break downward) Squeeze release events generate flash markers on the chart: "⚡ SQ↑" for bullish releases, "⚡ SQ↓" for bearish releases The dashboard tracks how many of the last 20 bars were in squeeze state — prolonged squeezes (12+ bars) tend to produce the most explosive releases Layer 4 — Linear Regression Forecast A forward-looking projection of the Bollinger Band envelope using linear regression slopes The system calculates the current slope of both the BB basis and the BB deviation, then projects them forward by the configured number of bars (default: 20 bars = 20 minutes on 1-minute chart) The projection is smoothed using a weighted blend from current values to forecasted values, preventing jarring visual jumps Displayed as a projected envelope with upper, basis, and lower forecast lines, plus a filled forecast cloud Forecast color reflects projected direction: yellow-green if the basis is projected to rise, red if projected to fall Price labels at the forecast endpoints show the projected upper and lower band values — giving you concrete target levels A minimum bandwidth floor prevents the forecast from collapsing to zero during extreme compression Layer 5 — Trend EMA A 100-period Exponential Moving Average provides macro trend context Color-coded: yellow-green when price is above (bullish structure), red when below (bearish structure) The EMA slope direction (rising vs. falling over 3 bars) is factored into the confluence scoring system Acts as a structural filter — signals aligned with the EMA trend receive bonus confidence, signals against it receive penalties Layer 6 — RSI Filter A 14-period Relative Strength Index provides momentum confirmation Oversold threshold at 30, overbought at 70 — stricter than typical settings to filter gold noise RSI must be in a supportive zone for signals to fire: below 45 for bullish signals, above 55 for bearish signals Deeply oversold or overbought RSI readings contribute up to 15 points to the confluence score Layer 7 — Volatility Regime Classification The system continuously classifies the current market state into one of five regimes: SQUEEZE 🔴 — BB inside KC, volatility compressed, spring loading RELEASE ⚡ — first bar after squeeze ends, explosive move initiating EXPANSION 📈 — bandwidth increasing and price trending directionally COMPRESSION — bandwidth decreasing, volatility contracting RANGING — no clear volatility trend, sideways movement The current regime is displayed prominently in the dashboard and influences signal generation — signals during active squeeze are blocked entirely ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📊 Signal System — Band Touch Signals AlphaX VPS generates two types of chart signals: Entry Signals at band extremes and Exit Markers at mean reversion. Entry Signals ( ⬆ / ⬇ ) Entry signals appear when price touches or pierces a Bollinger Band while multiple confluence factors align to confirm a high-probability reversal setup. Bullish Entry (⬆) — a yellow-green label below the bar indicating a potential long opportunity: Price touches or pierces the lower Bollinger Band Confluence score meets the minimum confidence threshold (default: 60%) RSI is below 45 (supportive of oversold bounce) Volume is above average (institutional participation confirmed) A swing low structure is present near the band (not just a random wick) Candle shows bullish rejection — either a bullish close or a long lower wick (>50% of candle range) Market is NOT in active squeeze (signals blocked during compression) Cooldown period has elapsed since last bullish signal (default: 15 bars) Bearish Entry (⬇) — a red label above the bar indicating a potential short opportunity: Price touches or pierces the upper Bollinger Band Confluence score meets the minimum confidence threshold RSI is above 55 (supportive of overbought reversal) Volume is above average A swing high structure is present near the band Candle shows bearish rejection — either a bearish close or a long upper wick Market is NOT in active squeeze Cooldown period has elapsed since last bearish signal Each signal label displays the tier rating and confidence percentage : S-Tier (80%+) — exceptional setup, maximum confluence — highest probability A-Tier (70–79%) — strong setup, most factors aligned B-Tier (60–69%) — decent setup, adequate confluence for a trade with proper risk management Signals below B-Tier are automatically filtered out and never displayed. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Exit Markers ( ✕ ) After an entry signal fires, the system tracks position direction and monitors for mean reversion to the BB basis line : Long Exit ✕ — appears when price crosses back above the BB basis after a bullish entry, indicating the mean reversion target has been reached Short Exit ✕ — appears when price crosses back below the BB basis after a bearish entry, indicating the mean reversion target has been reached Exit markers serve as profit-taking signals — the statistical edge of a band touch trade is the reversion to the mean (basis line). Once price reaches the basis: Take partial or full profit Tighten stop loss to breakeven Wait for the next band touch signal before re-entering ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🧠 Multi-Confluence Confidence Scoring System Every entry signal is evaluated by a real-time scoring engine that produces a confidence percentage from 0% to 100%. This is not a simple threshold check — it is a weighted multi-factor assessment that rewards alignment and penalizes contradiction. Scoring Factors — Bullish Signals: Band Touch Quality (up to 20 points) How deeply price pierced the lower Bollinger Band Pierce depth >5% of band width = 20 points (strong penetration) Any pierce = 15 points Near-touch (within 0.1%) = 10 points %B Position (up to 10 points) Bollinger %B measures where price sits within the band range (0 = lower band, 1 = upper band) %B below 0 (outside lower band) = 10 points %B below 0.05 = 8 points %B below 0.15 = 5 points RSI Depth (up to 15 points) RSI below 20 = 15 points (deeply oversold) RSI below 25 = 12 points RSI below 30 = 10 points RSI below 40 = 3 points EMA Trend Alignment (up to 10 points) Price above 100 EMA AND EMA slope rising = 10 points (full alignment) Price above 100 EMA only = 5 points Squeeze Release Confluence (up to 10 points) Squeeze just released with bullish momentum = 10 points (explosive setup) Bullish squeeze momentum without active squeeze = 5 points Candle Rejection Pattern (up to 10 points) Long lower wick (>50% of range) + bullish close = 10 points (textbook rejection) Long lower wick only = 7 points Bullish close only = 3 points Volume Confirmation (up to 10 points) Above-average volume + bullish close = 10 points (institutional buying) Above-average volume only = 5 points MACD Momentum (up to 8 points) MACD line above signal line OR histogram rising for 2+ bars = 8 points 200 SMA Structure (up to 7 points) Price above 200 SMA = 7 points (macro trend support) Penalty Deductions: Price BELOW EMA trend = -15 points (counter-trend signal) RSI above 55 = -12 points (momentum doesn't support reversal) Active squeeze = -8 points (wait for release) Expanding but directionless = -5 points No volume spike when volume filter enabled = -5 points Bearish candle rejection present = -10 points (wrong candle structure) The same structure applies to bearish signals with inverted logic — upper band touch, overbought RSI, price below EMA, bearish rejection candles, etc. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🛡 Signal Quality Gates — Why This Indicator Produces Clean Signals Beyond the confidence score, every signal must pass through six independent quality gates before it can appear on the chart. If any single gate fails, the signal is blocked entirely — regardless of the confidence score: Gate 1 — Band Touch Gate Price must actually reach or pierce the Bollinger Band (within 0.1%) Signals near the middle of the bands are impossible — only statistical extremes qualify Gate 2 — RSI Zone Gate Bullish signals require RSI below 45 Bearish signals require RSI above 55 This prevents signals when momentum is neutral or contradictory Gate 3 — Volume Gate Volume must exceed the 20-period volume moving average multiplied by 1.2x Low-volume band touches are often noise — this gate requires institutional participation Can be toggled off for instruments with unreliable volume data Gate 4 — Swing Structure Gate A swing low must be present within the last 3 bars for bullish signals (price formed a local bottom) A swing high must be present within the last 3 bars for bearish signals (price formed a local top) This prevents signals on through-band breakdowns where price is accelerating through the band, not bouncing off it Can be toggled off for faster signal generation Gate 5 — Candle Confirmation Gate Bullish signals require either a bullish candle close (close > open) or a bullish rejection wick (lower wick > 50% of total range) Bearish signals require either a bearish candle close or a bearish rejection wick This confirms that price is actually rejecting the band level, not just touching it on the way through Gate 6 — Squeeze Block Gate No signals fire during active squeeze (BB inside KC) During squeeze, volatility is compressed and band touches are unreliable — the bands themselves are artificially narrow Signals resume after squeeze releases Gate 7 — Cooldown Gate A minimum of 15 bars (15 minutes on 1-minute chart) must elapse between signals of the same direction Prevents signal spam during choppy band-walking conditions This seven-gate architecture is why AlphaX VPS produces significantly fewer but higher-quality signals compared to basic Bollinger Band indicators. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠ Identifying Choppy / Ranging Markets — When NOT to Trade Knowing when to stay out is just as important as knowing when to enter. AlphaX VPS provides multiple visual cues for choppy, range-bound conditions: How to identify choppy conditions: BB Cloud is extremely narrow — when the Bollinger Bands contract tightly, the cloud between upper and lower bands becomes paper-thin. Narrow bands = low volatility = no clean directional moves. Squeeze dots are RED for extended periods — prolonged red dots on the basis line mean BB is trapped inside KC. While this predicts an eventual explosive move, trading during the squeeze is a losing strategy. Wait for the yellow-green release dot. Forecast cloud is flat and narrow — if the projected envelope shows no significant expansion or directional slope, the system expects continued compression. No expansion forecast = no trade. Regime dashboard shows "COMPRESSION" or "RANGING" — the volatility regime classifier explicitly tells you the current state. These regimes have the lowest signal quality. No signals appearing despite price touching bands — this means the quality gates are doing their job. If you see band touches but no labels, the confluence score is too low or a gate is blocking. Trust the filter. EMA (100) is flat and price is oscillating around it — no trend, no edge. Basis distance in dashboard shows very small percentage — price is hugging the basis line, meaning there is no stretched rubber band to snap back. Mean reversion trades need extension first. What to do during choppy markets: Do not force trades — wait for squeeze release (yellow-green dot + ⚡ marker) Watch for the forecast cloud to start expanding and tilting directionally Monitor the regime dashboard — wait for "RELEASE ⚡" or "EXPANSION 📈" to appear Consider moving to a higher timeframe where structure may be clearer Use the squeeze bar counter in the dashboard — once squeeze bars reach 12+/20, the release is likely imminent ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🚀 How to Trade with AlphaX VPS — Step by Step Step 1 — Assess Market Regime Check the dashboard REGIME field: Is it EXPANSION, COMPRESSION, SQUEEZE, or RANGING? Check the Bollinger Band cloud width: Is it expanded or collapsed? Check squeeze dots: Red = stay out. Gray = normal. Yellow-green = just released. If the regime is SQUEEZE or COMPRESSION → do not trade. Wait for RELEASE or EXPANSION. Step 2 — Monitor the Forecast Look at the projected envelope ahead of current price Is the forecast expanding or narrowing? What direction is the basis slope? A widening forecast with a clear directional slope tells you where the bands are heading The forecast upper and lower price labels give you concrete projected targets Step 3 — Wait for a Band Touch Signal Do not chase price in the middle of the bands — wait for price to reach an extreme A ⬆ or ⬇ label will appear only when all seven quality gates pass and the confidence score meets your threshold The label shows the tier (S/A/B) and exact confidence percentage — use this to size your position (higher confidence = larger size) Step 4 — Enter the Trade Enter on the signal bar's close (signals are confirmed on bar close, non-repainting) Place your stop loss beyond the Bollinger Band that was touched (for bullish: below the lower band, for bearish: above the upper band) Your profit target is the BB basis line (mean reversion target) — the system will mark this with a ✕ when reached Step 5 — Manage and Exit Watch for the ✕ exit marker — this appears when price crosses back to the BB basis Take partial or full profit at the basis line If price continues past the basis toward the opposite band, you can trail your stop using the basis line as your new stop level If a new signal appears in the same direction before the exit triggers, it can be used to add to the position Step 6 — Squeeze Release Trades (Advanced) When you see the "⚡ SQ↑" or "⚡ SQ↓" release marker, this is a momentum breakout setup The squeeze release direction (bull/bear) is determined by the squeeze momentum calculation Enter in the direction of the release These moves tend to be explosive — use wider stops and larger targets than mean reversion trades The forecast projection will often show an expanding envelope in the direction of the release — use the forecast band endpoints as extended targets ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📋 Real-Time Dashboard — Complete Market Intelligence The dashboard provides a comprehensive snapshot of every metric the system monitors, organized into five sections: ─── VOLATILITY ─── REGIME — Current volatility state (Squeeze / Release / Expansion / Compression / Ranging) with color-coded background BANDWIDTH — Current BB width as percentage of basis, colored relative to its 50-period average (narrow = green/opportunity, wide = red/extended) BB %B — Where price sits within the bands (0% = lower band, 100% = upper band). Extreme readings are color-highlighted SQUEEZE BARS — How many of the last 20 bars were in squeeze (higher = more compressed = bigger expected release) KC RELATION — Whether BB is inside KC (squeeze), above KC (expansion), or near KC (transition) ─── MOMENTUM ─── RSI — Current RSI value with zone label (OB/OS/HIGH/LOW/MID) and appropriate coloring EMA — Trend direction based on price vs. 100 EMA and EMA slope (▲ BULL / ▲ RISING / ▼ BEAR / ▼ FALLING) SQ MOMENTUM — Squeeze momentum direction and strength (▲▲ STRONG UP / ▲ RISING / ▼▼ STRONG DOWN / ▼ FALLING / — FLAT) MACD — MACD momentum status (▲ BULLISH / ▼ BEARISH / — NEUTRAL) VOLUME — Whether current volume exceeds the moving average threshold (▲ ABOVE AVG / — NORMAL) ─── CONFIDENCE ─── BULL CONF — Current bullish confluence score with tier rating (S-TIER / A-TIER / B-TIER / C-TIER / LOW) BEAR CONF — Current bearish confluence score with tier rating These update in real-time so you can see confluence building before a signal fires ─── FORECAST ─── BASIS SLOPE — Direction the BB basis is heading (▲ RISING / ▼ FALLING / — FLAT) BAND FORECAST — Whether bands are projected to widen (▲ WIDENING) or narrow (▼ NARROWING) or remain stable ─── STRUCTURE ─── SMA 200 — Price position relative to 200 SMA (▲ ABOVE / ▼ BELOW) — macro trend context ─── TRADE STATE ─── POSITION — Current tracked position direction (▲ LONG / ▼ SHORT / — FLAT) with color-coded background BASIS DISTANCE — How far price is from the BB basis as a percentage — measures extension and mean reversion potential Dashboard position (Top Left / Top Right / Bottom Left / Bottom Right) and text size (Tiny / Small / Normal) are configurable. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚡ Key Features 📊 Bollinger Bands with gradient trend cloud — instant visual of price position within the volatility envelope 🔷 Keltner Channels with ATR-based boundaries — the volatility reference for squeeze detection 🔴 BB/KC Squeeze Engine — detects compression, tracks squeeze duration, classifies release direction ⚡ Squeeze Release Flash Markers — "⚡ SQ↑" and "⚡ SQ↓" labels mark the explosive moment 🔭 Linear Regression Forecast — projects the band envelope forward with directional slope and price targets 🎯 Multi-confluence band touch signals — six-factor scoring with seven independent quality gates 📐 Volume filter — requires above-average volume for signal confirmation (toggleable) 🏗 Swing structure filter — requires local swing formation near bands (toggleable) 🕯 Candle rejection analysis — wick ratio and close direction confirmation 📈 MACD momentum integration — histogram trend confirmation within the scoring system 📏 200 SMA macro structure — long-term trend context for scoring 📐 100 EMA trend filter — intermediate trend direction and slope analysis ✕ Mean reversion exit markers — automatic profit target detection at the BB basis 🏷 Tiered signal labels — S / A / B tier with confidence percentage for position sizing decisions 📋 22-row real-time dashboard — complete market intelligence across volatility, momentum, confidence, forecast, structure, and trade state 🎨 Cohesive dual-tone color theme — yellow-green for bullish, red for bearish, orange for neutral, gray for inactive 🔔 11 alert conditions — S-Tier, A-Tier, and any-tier for both bull and bear, plus squeeze releases and exits ⚙ Fully configurable — all periods, multipliers, thresholds, colors, gates, and dashboard settings adjustable from the settings panel 🚫 No candle coloring — clean chart by default, your candles remain untouched 📏 Non-repainting — all signals confirmed on bar close ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚙ Settings Reference 📊 Bollinger Bands BB Length — SMA period for the basis line (default: 30) BB Multiplier — standard deviation multiplier for band width (default: 2.2) Source — price source for calculations (default: close) Show BB Cloud — toggle the gradient band fill 🔷 Keltner Channel KC Length — EMA period for the center line (default: 30) KC ATR Multiplier — ATR multiplier for channel width (default: 1.8) KC ATR Length — ATR calculation period (default: 20) Show KC Lines — toggle Keltner boundary display ⚡ Squeeze Show Squeeze Dots — toggle colored dots on the basis line Alert on Squeeze Release — enable squeeze release alerts 🔭 Forecast Show Regression Forecast — toggle the projected envelope Forecast Bars — how many bars forward to project (default: 20) 🎯 Signals Show Band Touch Signals — master toggle for entry labels Min Confidence % — minimum confluence score required (default: 60%) Signal Cooldown — minimum bars between same-direction signals (default: 15) Show Mean Reversion Exits — toggle ✕ exit markers 📈 RSI Filter RSI Length — calculation period (default: 14) RSI Oversold — threshold for oversold scoring bonus (default: 30) RSI Overbought — threshold for overbought scoring bonus (default: 70) 📐 EMA Trend Filter Show Trend EMA — toggle the 100 EMA display EMA Length — EMA period (default: 100) 📊 Volume Filter Use Volume Confirmation — enable/disable volume gate (default: ON) Volume Threshold Multiplier — how far above average volume must be (default: 1.2x) Volume MA Length — period for volume moving average (default: 20) 🏗 Structure Filter Use Swing Structure Filter — enable/disable swing gate (default: ON) Swing Lookback — bars to check for swing formation (default: 3) 🎨 Colors Bull Primary — yellow-green family for all bullish elements Bear Primary — red family for all bearish elements Basis / Neutral — orange for basis and neutral elements Squeeze ON / OFF / Neutral — dot colors for squeeze states Forecast Bull / Bear — projection envelope colors Dashboard BG / Text / Neutral — dashboard styling 📋 Dashboard Show Dashboard — master toggle Position — corner placement (default: Top Right) Text Size — Tiny / Small / Normal (default: Small) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔔 Alert Conditions S-Tier Bull Band Touch — fires when a bullish signal with 80%+ confidence appears A-Tier Bull Band Touch — fires when a bullish signal with 70–79% confidence appears Any Bull Band Touch — fires on any bullish signal meeting minimum threshold S-Tier Bear Band Touch — fires when a bearish signal with 80%+ confidence appears A-Tier Bear Band Touch — fires when a bearish signal with 70–79% confidence appears Any Bear Band Touch — fires on any bearish signal meeting minimum threshold Any Band Touch Signal — fires on any entry signal regardless of direction Squeeze Release — Bullish — fires on bullish squeeze release Squeeze Release — Bearish — fires on bearish squeeze release Any Squeeze Release — fires on any squeeze release Long Exit — Mean Reversion — fires when a long position reaches the BB basis Short Exit — Mean Reversion — fires when a short position reaches the BB basis All alert messages include {{ticker}}, {{interval}}, and {{close}} placeholders for webhook integration. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🎯 Default Settings — Optimized For The default configuration is specifically tuned for XAUUSD (Gold) on the 1-minute timeframe : BB Length 30 and Multiplier 2.2 — smooths gold's micro-noise and widens bands to reduce false touches KC Length 30 and ATR Multiplier 1.8 — matched to BB for proper squeeze detection on gold Confidence threshold at 30% — aggressively filters low-quality signals while keeping genuine setups Cooldown at 4 bars (4 minutes) — prevents signal spam during volatile gold transitions Volume filter enabled with 1.2x threshold — confirms institutional participation Swing structure filter enabled — requires actual price structure, not random wicks 100 EMA provides ~1.5 hours of trend context on 1-minute 20-bar forecast projects 20 minutes ahead — practical for scalping decisions For other instruments or timeframes, adjust: Higher timeframes (5m, 15m, 1H) — reduce BB Length to 20–25, reduce confidence to 45–55%, increase forecast bars to 30–50 Forex majors (EURUSD, GBPUSD) — reduce BB Multiplier to 2.0, reduce KC ATR Multiplier to 1.5, keep confidence at 50–60% Indices (NAS100, US30, SPX500) — use defaults or increase BB Length to 35–40 for broader structure Crypto (BTCUSD, ETHUSD) — increase BB Multiplier to 2.5, increase cooldown to 20–25 bars due to higher volatility Less noise / fewer signals — increase Min Confidence to 70%+, increase Cooldown, enable all gates More signals / aggressive scalping — decrease Min Confidence to 40–50%, reduce Cooldown to 8–10, disable Swing Structure gate ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 👥 Who This Is For 🥇 Gold (XAUUSD) scalpers and intraday traders — built and default-tuned specifically for gold's volatility, noise profile, and session structure 📊 Bollinger Band traders — if you trade band touches and mean reversion, this system adds institutional-grade filtering to your existing strategy ⚡ Squeeze traders — the BB/KC squeeze engine with momentum direction and release markers provides a complete squeeze trading system 📉 Forex and index traders — applicable to all major instruments with minor setting adjustments 🧠 Systematic traders — the confidence scoring system provides a quantitative framework for position sizing and trade selection 📈 Traders who value clean charts — no indicator clutter, no candle painting, no overlapping signals. One cohesive system with consistent color coding ⚠ Traders who struggle with overtrading — the seven quality gates physically prevent low-quality signals from appearing. You cannot overtrade what you cannot see 🔭 Forward-looking traders — the regression forecast gives you a projected roadmap that most indicators do not provide ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📝 Notes All calculations are non-repainting — signals are confirmed on bar close only The linear regression forecast updates on each new bar — the projection is a mathematical estimate, not a guarantee of future price action Volume filter uses the volume data provided by your broker/data feed — for instruments or exchanges with unreliable volume, consider disabling the volume gate The 200 SMA used in scoring requires 200 bars of history to calculate — on very short chart histories, this factor may not contribute to early signals Maximum 500 labels per chart are supported by TradingView — on very low timeframes with extended history, oldest labels may be automatically removed The forecast polyline uses TradingView's polyline drawing objects — a maximum of 100 polylines are allocated Dashboard uses a table object that updates on the last bar — it reflects real-time values on live charts Squeeze momentum calculation uses the John Carter method — linear regression of the midline-basis deviation over the BB length ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠ Disclaimer This indicator is a technical analysis and visualization tool intended for educational and informational purposes only. It does not constitute financial advice or a recommendation to buy or sell any financial instrument. All signals are generated from historical and real-time price data using mathematical calculations — their accuracy or profitability is not guaranteed. Past performance of any signal type does not guarantee future results. Always conduct your own analysis, use proper risk management, and consult a licensed financial advisor before making any trading decisions. The author accepts no responsibility for any losses incurred from the use of this indicator. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Built for traders who demand clarity, precision, and institutional-grade filtering from their volatility analysis.
Indicador Pine Script®
por AlphaX-Trade
2
MTF CISD Trade System + Alerts🔹 Introduction This indicator, MTF CISD Trade System + Alerts, identifies high-probability trade entries by detecting Change in State of Delivery (CISD) events across up to six user-defined timeframes simultaneously, and only triggering an entry signal when every enabled timeframe agrees on directional bias — confirmed by a matching CISD on the chart's own timeframe. The core idea is this: when the market's delivery mechanism — the way price is being distributed or accumulated by institutional participants — shifts in the same direction across multiple timeframes at once, that convergence is meaningful. A single timeframe CISD is noise. Six timeframes aligning and then confirming on your entry timeframe is a structurally significant event. No model of institutional order flow or delivery state is perfect. CISD is a proxy — a price-action-based inference about intent, not direct visibility into the order book. I'll address this limitation honestly throughout. 🔹 The Premise 🔸 What is "Delivery"? Markets don't move randomly. Price is delivered from one level to another by participants with directional intent. When a large participant — a bank, fund, or algorithm with size — wants to accumulate a long position, they need sellers. When they want to distribute, they need buyers. The process of filling that intent leaves observable footprints in price structure. Delivery state refers to the current directional intent baked into recent price action. Is the market delivering price upward — making higher closes, respecting higher opens, absorbing sell-side resistance? Or is it delivering downward — closing below opens, treating prior bullish structure as supply? The key insight is that delivery doesn't change instantaneously. It tends to persist. A market that has been delivering bullishly for the past several candles is more likely to continue doing so than to suddenly reverse — until it shows you structural evidence of a state change. That evidence is what CISD captures. 🔸 The Mechanics of a CISD Consider a concrete example. Assume price has been in a bearish delivery phase. The most recent non-inside bearish candle closed at $99 with an open of $101. That open — $101 — becomes a bull target: a structural level that, if reclaimed on a close, suggests the market is no longer delivering bearishly. Now assume price trades sideways for a few candles and then a candle closes at $102. The prior close was at $100, meaning price was below $101 going into this candle and has now closed above it. That crossover — price transitioning through the open of a prior bearish candle — is a Bullish CISD. Why does the open matter and not, say, the high or the body midpoint? Because the open of a directional candle represents where price started before commitment was expressed. Reclaiming it suggests that commitment is being challenged at the source. It's the most structurally defensible level to use without access to actual order book data. The inverse applies for Bearish CISD: the open of the last non-inside bullish candle becomes a bear target, and a close below it — crossing from above — signals a shift toward bearish delivery. Inside candles are excluded. A candle whose high is lower than the prior high and whose low is higher than the prior low is an inside candle — it expresses no directional commitment of its own. Using it to set a target would contaminate the signal with indecision. The indicator skips inside candles entirely when updating targets. 🔸 Why Multiple Timeframes? A single CISD on a 5-minute chart happens dozens of times per session. Most are meaningless. They represent micro-fluctuations in a market that is, at higher timeframes, still clearly trending in the opposite direction. The core challenge in intraday trading is timeframe alignment: you want to be trading with the higher timeframe bias, not against it. A bullish 5-minute CISD during a bearish hourly, daily, and weekly structure is a counter-trend scalp at best, a trap at worst. Lo and MacKinlay (1988) documented that returns at different frequencies are not independent — price structure at higher timeframes significantly conditions the distribution of outcomes at lower timeframes. This is the academic underpinning of what traders know empirically: trade with the higher timeframe, not against it. When the Weekly, Daily, H4, H1, M15, and M5 have all individually confirmed a bullish CISD — meaning delivery has demonstrably shifted to bullish on every relevant timeframe — the probability that a long entry will find follow-through is structurally higher than any single-timeframe setup could provide. Six-timeframe alignment is rare. That rarity is the filter. 🔸 The Confirmation Gate — Why Not Enter Immediately on Alignment? This is a subtle but critical design decision, and one that separates this system from a naive multi-timeframe crossover. When a higher timeframe — say, the hourly — registers its CISD and becomes the final piece needed for full bearish alignment, the current 5-minute candle might already have a bullish CISD baked into it. That candle existed before the alignment completed. It's not a response to bearish alignment — it's a relic of the prior bullish structure. Entering short on that candle would be entering against the very confirmation you're requiring. You'd be using a bullish local signal as a short entry trigger simply because the timing happened to coincide with a higher timeframe shift. The indicator solves this with a pending state. The moment full alignment is achieved, the system arms a directional pending flag and waits. It does not enter. It listens. The entry only fires when the next local CISD — the one that occurs after alignment is confirmed — appears in the correct direction. A bearish pending state requires a new bearish CISD on the chart timeframe. A bullish pending state requires a new bullish CISD. The entry is always a fresh confirmation, never a recycled one. 🔹 How It Works 🔸 CISD Detection Engine The indicator runs an identical CISD detection function on every timeframe, including the local chart timeframe and all six user-selected higher timeframes via request.security. For each timeframe, it maintains two levels: Bull target — the open of the most recent non-inside bearish candle Bear target — the open of the most recent non-inside bullish candle A Bullish CISD fires when the prior close was at or below the bull target and the current close is above it. A Bearish CISD fires when the prior close was at or above the bear target and the current close is below it. State updates — the "Last CISD" label in the table — only occur on confirmed (closed) bars. This prevents the state from flickering during the formation of a live candle. What you see in the table reflects the last completed directional shift, not a mid-bar reading. Small green triangles below bars mark Bullish CISD events on the chart timeframe. Small red triangles above bars mark Bearish CISD events. These are visual anchors showing you where delivery shifts are occurring locally — independently of whether alignment is achieved. 🔸 Multi-Timeframe Alignment Table In the top-right corner, a compact table displays the current CISD state for each of the six configured timeframes. Green (Bullish) — that timeframe's last confirmed CISD was bullish Red (Bearish) — that timeframe's last confirmed CISD was bearish Gray (Neutral) — insufficient history or no CISD has fired yet Full alignment — all enabled timeframes showing the same state — triggers a green or red background on the chart. This background is persistent: it stays active for the entire duration that alignment holds, giving you a continuous visual context for the trade environment. Individual timeframes can be enabled or disabled. Disabling a timeframe removes it from the alignment calculation entirely — it doesn't count for or against alignment. This lets you configure the system for your specific trading style, whether that's a 3-timeframe approach for faster setups or all 6 for maximum confluence. 🔸 Entry Signals Larger triangles — green below the bar for longs, red above the bar for shorts — mark actual entry signals. These only appear when: All enabled timeframes are aligned in the same direction The CISD confirmation gate is armed (alignment was freshly achieved or is ongoing) A new local CISD fires in the matching direction The entry falls within the configured time window and day-of-week filter Entries are taken at the close of the confirmation candle. This is an important assumption: in practice, you would place a limit order at the close price or enter at the open of the next candle. Bar-close entries are the most common convention for CISD-based strategies because the CISD itself is only confirmed on the close. 🔸 Trade Lines and Risk Management When an entry fires, the indicator automatically draws three horizontal lines extending forward in time: Blue (Entry) — the close price at the moment of entry Red dashed (Stop Loss) — the open of the entry candle by default, or the low of the prior candle for longs / high of the prior candle for shorts if the "Use Previous Candle for SL" option is enabled Green dashed (Take Profit) — calculated as Entry + (Risk × RR Ratio) for longs, Entry − (Risk × RR Ratio) for shorts The Risk-Reward Ratio is fully adjustable. The default is 2.0, meaning TP is twice the distance of SL from entry. Increasing this improves the reward per trade but will reduce win rate as price needs to travel further to close the trade as a winner. Decreasing it improves win rate at the cost of expected value per trade — there is a direct tradeoff. The stop loss placement assumption matters significantly. Using the entry candle's open assumes you're targeting the candle where delivery shifted as your invalidation point — if price returns to that open, the CISD failed. Using the prior candle's extreme gives the trade slightly more room but widens risk. Neither is universally superior — it depends on the volatility of the instrument and the timeframe you're trading. Lines extend bar-by-bar until alignment breaks, at which point the trade is considered closed. 🔸 Session and Day-of-Week Filters The entry filter uses America/New_York timezone with automatic DST adjustment. You set a start and end hour/minute in Eastern time, and the indicator computes whether each potential entry candle's close time falls within that window. This matters because CISD setups during illiquid hours — Asian session for US equities, overnight for forex majors during off-hours — tend to produce false alignment from low-volume price drift rather than genuine institutional delivery shifts. Restricting entries to the primary session for your instrument significantly reduces noise. Days of the week are individually toggleable. Sunday and Saturday are off by default. Mondays and Fridays around major economic events are worth monitoring carefully — many traders prefer to disable Friday entries to avoid holding through weekend gaps. 🔸 Performance Statistics Table In the bottom-left, a live stats table tracks: Total Trades — all entry signals that fired within the allowed session Wins — trades where price reached the TP level before alignment broke Losses — trades where price hit the SL level, or alignment broke before either level was reached Win Rate — wins as a percentage of total trades There are limitations here worth stating clearly. The stats count a trade as a loss if alignment breaks before either TP or SL is hit — which is the conservative assumption. In live trading, you might hold the trade past alignment if your personal rules allow it. The stats reflect the mechanical rules of the system as coded, not all possible discretionary interpretations. 🔹 Closing Remarks CISD is one of the more structurally sound price-action concepts available to retail traders because it is anchored to a specific, objectively defined level — the open of a prior directional candle — rather than a subjective pattern or a lagging average. It doesn't predict the future. It identifies where delivery has demonstrably shifted and asks whether the market is confirming that shift across the timeframes that matter to you. This system is not a black box that prints money. Full six-timeframe alignment is rare by design. When it occurs, you are looking at a market that has, at every relevant structural level, shifted its delivery state in the same direction. That's meaningful context — not a guarantee. The most important thing this system can do for your trading is force discipline: you cannot enter unless structure agrees. You cannot enter on a stale signal. You cannot override the session filter in the code. The rules are the rules. Use it as a confluence tool. Study the setups it finds. Understand why some hit TP and others break alignment early. The patterns in that data will teach you more about your instrument than any indicator description can. 🔹 References Market Microstructure & Timeframe Dependency Lo, A. W., & MacKinlay, A. C. (1988). Stock market prices do not follow random walks: Evidence from a simple specification test. Review of Financial Studies, 1(1), 41–66. Easley, D., & O'Hara, M. (1992). Time and the process of security price adjustment. Journal of Finance, 47(2), 577–605. Order Flow and Directional Delivery Hasbrouck, J. (1991). Measuring the information content of stock trades. Journal of Finance, 46(1), 179–207. Glosten, L. R., & Milgrom, P. R. (1985). Bid, ask and transaction prices in a specialist market with heterogeneously informed traders. Journal of Financial Economics, 14(1), 71–100. Multi-Timeframe Analysis Müller, U. A., Dacorogna, M. M., Davé, R. D., Pictet, O. V., Olsen, R. B., & Ward, J. R. (1993). Fractals and intrinsic time — a challenge to econometricians. Olsen & Associates Research Group, Zurich.
Indicador Pine Script®
por Resonant_Trader
8
[ A L P H A X ] Edge - Support/Resistance | Breakout EntryAlphaX Edge — Support/Resistance × Breakout × Trend Confluence | Multi-Factor Confidence Scoring, Smart S/R Zones & Squeeze Detection AlphaX Edge is a professional multi-confluence trading system that combines six independent analytical layers into a single unified signal engine. Rather than relying on any single indicator, it requires agreement across Support/Resistance structure, trend direction, momentum, volume, ADX strength, and squeeze dynamics before generating a signal — producing fewer, higher-quality setups and filtering out the noise that plagues single-indicator systems. Designed for intraday and swing traders across all instruments and timeframes. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📸 Visual Overview The chart displays color-coded S/R zones, breakout and retest labels, trend structure labels, EMA ribbons, RSI divergence diamonds, and triangle entry signals — all governed by a real-time dashboard showing every active market condition at a glance. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔬 The Six Analytical Layers 1 — Smart Support & Resistance Zones AlphaX Edge automatically detects, merges, and manages S/R zones using pivot-based swing detection. Each zone is: Built from confirmed swing highs and lows using a configurable swing length Merged automatically when two levels fall within a user-defined ATR multiplier — preventing zone clutter Color-coded by role: yellow-green for confirmed support, red for confirmed resistance, gray for untested levels Aged out after a configurable number of bars to keep the chart clean and relevant Upgraded from neutral to confirmed only after a minimum number of touches — preventing weak levels from triggering signals When price approaches a confirmed zone from above, the zone acts as resistance. When approached from below, it acts as support. Broken zones flip polarity — a broken resistance becomes support and vice versa — and are tracked for retest opportunities. 2 — Breakout Detection with Anti-Fake Filter A breakout is confirmed only when all of the following conditions are met simultaneously: The candle body closes convincingly beyond the zone boundary (not just a wick poke) The candle body represents at least 40% of the total candle range — no doji or indecision candles Volume confirms participation (configurable: require spike or simply above-average volume) A cooldown timer prevents repeated breakout labels during choppy back-and-forth action RSI is not at an extreme overbought/oversold level — unless ADX confirms the trend is genuinely strong (preventing exhaustion breakout entries) 3 — Trend Structure Analysis AlphaX Edge tracks market structure using higher swing pivots — independently from the S/R zone engine. It identifies: Higher Highs + Higher Lows → confirmed uptrend structure Lower Highs + Lower Lows → confirmed downtrend structure Trend line drawn automatically connecting the most recent pivot lows (uptrend) or pivot highs (downtrend) UPTREND ▲ and DOWNTREND ▼ labels fire when structure shifts — with a configurable cooldown to prevent label spam 4 — EMA Trend Ribbon Three EMAs provide structural context at all times: Fast EMA (21) — yellow-green cross marks — immediate momentum direction Medium EMA (50) — gray line — intermediate trend filter Slow EMA (200) — dark gray thick line — macro structural backbone When all three are fanned in sequence (Fast > Medium > Slow for bull, reverse for bear), the trend is healthy and signals carry higher weight in the confluence engine. When they converge and flatten, the market is ranging — a visual warning to stand aside. 5 — Momentum Engine (RSI + MACD + Stochastic) Three oscillators run simultaneously and vote on momentum direction: RSI slope direction with smoothing — avoids single-bar noise MACD line vs signal cross and histogram direction Stochastic K vs D with overbought/oversold zone filtering A minimum of two out of three must agree before momentum is considered bullish or bearish. This voting approach prevents a single oscillator spike from generating false signals. 6 — Bollinger Squeeze Detection The squeeze engine monitors when Bollinger Bands contract inside Keltner Channels — indicating coiled volatility about to expand. When the squeeze fires (bands break outside the channels), directional momentum is assessed to determine which way the expansion is likely to break. Squeeze entries carry bonus weight in the confluence scoring system. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🧠 Confluence Scoring & Confidence System Every signal is evaluated across 10 independent factors , each contributing one point to the confluence score. Only signals meeting your configured minimum score threshold are displayed. The 10 factors per direction: ✓ SUP — Price is at a confirmed support zone (bull) or resistance zone (bear) ✓ BRK — A valid breakout has just occurred in the signal direction ✓ RET — A confirmed post-breakout retest is occurring ✓ TRD — Trend structure (HH+HL or LH+LL) aligns with signal direction ✓ MOM — At least 2 of 3 momentum oscillators confirm direction ✓ PAT — A candlestick pattern is present (engulfing, pin bar, or RSI divergence) ✓ VOL — Volume is above average and candle closes in the signal direction ✓ EMA — EMA ribbon is aligned or price is on the correct side of the 200 EMA ✓ ADX — ADX confirms a trending market with directional dominance ✓ SQZ — Squeeze has fired or is expanding in the signal direction Alongside the 10-point score, a confidence percentage (0–100%) is calculated using a weighted system that gives higher importance to structural factors (retest = 20 pts, breakout = 16 pts, support/resistance = 14 pts) and applies heavy penalties for counter-trend signals, overbought/oversold exhaustion, no-trend conditions, overextension from EMAs, and low volume. The resulting grade ranges from D to A+. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📊 Signal Types — Complete Entry Guide AlphaX Edge produces four distinct signal types. Below is a ranked guide to how each should be traded, from highest to lowest quality. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🥇 RANK 1 — Breakout + Volume Spike Confirmation (Highest Quality) What it looks like: A BREAKOUT ▲ or BREAKOUT ▼ label appears, and within 1–2 candles a volume spike dot (●) appears in the same direction. The confluence triangle signal fires. Why it's the strongest: The volume spike occurring immediately after or alongside the breakout label confirms that institutional participation is behind the move. A breakout without volume is frequently a trap — a breakout with a volume spike right after is significantly more likely to follow through. How to enter: Wait for the breakout label to appear AND see the volume spike dot on the same or next 1–2 candles Enter at market on the close of the volume spike candle, or on a small pullback into the broken level Stop loss: just below the broken resistance (for longs) or just above the broken support (for shorts) — beyond the zone boundary Target: next S/R zone visible on the chart, or a 1.5–2x ATR minimum ⚠ If BREAKOUT ▲/▼ shows "⚠ STRETCHED": This means price is already significantly extended from the EMA ribbon at the moment of the breakout. A volume spike dot within 1–2 candles still validates the move — but be aware that a pullback to the EMAs is likely before continuation. In this case, reduce position size or wait for the retest instead of chasing the initial breakout. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🥈 RANK 2 — Retest Entry (High Quality, Lower Risk) What it looks like: After a BREAKOUT label fires, price pulls back to the broken level within the retest window. A RETEST ▲ or RETEST ▼ label appears, and the confluence triangle signal fires. Why it's strong: The retest is the classic institutional entry — the breakout already proved the level was breakable, and the pullback offers an optimal risk/reward entry with a nearby and well-defined stop. How to enter: Wait for the RETEST label — do not anticipate it. Price must close back in the broken zone's range and show a reversal candle (engulfing or pin bar adds confidence) Enter on the close of the confirming candle at the retest zone Stop loss: a close back below the retest zone (not a wick — a full candle body close on the wrong side) Target: the breakout high/low target or the next S/R zone Highest conviction retest setup: RETEST label + confluence triangle + volume above average + RSI not at extreme = A or A+ grade signal. These are the setups to size up on. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🥉 RANK 3 — Trend Confluence Signal at S/R (Medium-High Quality) What it looks like: Price reaches a confirmed support or resistance zone while the trend structure, EMA alignment, momentum, and ADX all agree. The confluence triangle fires without a preceding breakout — price is bouncing from the zone within an established trend. Why it works: This is the classic trend continuation pullback entry — price returns to a key level inside an ongoing trend, and multiple independent factors confirm the bounce has begun. How to enter: The UPTREND ▲ or DOWNTREND ▼ label must have already appeared — do not take confluence signals at S/R during a ranging market (no active trend label = lower confidence) Wait for a confirming candle at the zone — a bullish engulfing, pin bar, or strong close in the trend direction adds significant weight Enter on the close of the confirming candle Stop loss: beyond the S/R zone boundary plus one ATR buffer Target: the prior swing high/low, next resistance zone, or 2x ATR ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4 — Trend Structure Label Entry (Use With Additional Confirmation) What it looks like: An UPTREND ▲ or DOWNTREND ▼ label appears, marking a confirmed shift in market structure (a new Higher High + Higher Low, or Lower High + Lower Low). Important — do not enter directly on the label: The trend label confirms that structure has already shifted — it is not an entry signal by itself. Price has typically already moved significantly by the time the label fires, and entering immediately carries the risk of chasing an extended move. How to use the trend label: Treat it as a directional bias reset — from this point forward, only look for long setups (after UPTREND ▲) or short setups (after DOWNTREND ▼) Wait for the first confluence triangle signal that appears after the trend label — this is your primary entry in the new trend direction Alternatively, wait for price to pull back to the nearest S/R zone or EMA and generate a confluence signal there The closer the first post-label triangle is to an S/R zone and the 21 or 50 EMA, the higher the trade quality ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠ The Stretched Breakout — When to Be Careful When a breakout label shows "⚠ STRETCHED" , it means the breakout is occurring while price is already significantly extended from the EMA ribbon — the gap between price and the Fast EMA, or between the Fast and Slow EMA, has reached a level where mean reversion risk is elevated. Stretched breakout without volume spike → Stand aside or reduce size significantly. The move has likely already travelled the bulk of its range for this leg, and a snapback to the EMAs is the more probable next event. Stretched breakout with volume spike within 1–2 candles → Momentum is genuine, but manage it differently: Do not chase — wait for a small pullback toward the broken level or the Fast EMA Use a tighter stop and reduced position size Take profit earlier than you normally would — the extended distance from EMAs means the move is borrowing from the next leg Watch for RSI divergence forming quickly after the breakout — this is a sign the stretched move is exhausting ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠ Identifying Choppy / Ranging Markets — When NOT to Trade AlphaX Edge has multiple visual signals that tell you to step aside: EMAs converging and flattening — when all three EMAs cluster together and move sideways, there is no directional bias. Signals in this environment are lower quality regardless of score. No active trend label — if neither UPTREND ▲ nor DOWNTREND ▼ has appeared recently, the market is in a structural no-man's-land. Wait for structure to develop. Dashboard shows WEAK TREND — STAND ASIDE or MIXED — STAND ASIDE — these verdict states indicate that ADX is below threshold or bull and bear scores are close. Both are warning signs. Squeeze is ON (● SQUEEZE ON in dashboard) — do not enter during an active squeeze. Wait for the squeeze to fire (◆ SQUEEZE FIRED) and for a directional confluence signal to follow. Rapid alternating UPTREND/DOWNTREND labels — if the trend structure labels are flipping frequently, the market is whipsawing. The cooldown filter reduces this, but the message is clear: no clean trend is present. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📐 The Dashboard — Reading Your Market State at a Glance The real-time dashboard displays 12 live metrics organized into three sections: Structure Section: Price Position — whether price is at support, resistance, breaking out, or retesting Trend — current trend direction with active structure state (HH+HL, LH+LL, etc.) EMA Trend — EMA ribbon alignment and price position relative to the 200 EMA ADX — trend strength with numeric value Squeeze — current squeeze state Momentum Section: Momentum — oscillator vote count (how many of the three confirm each direction) RSI — current RSI state (rising, falling, overbought, oversold) with numeric value Rel Volume — current volume relative to the moving average (Dry / Normal / High / Spike) Scoring Section: Bull Score — current confluence count out of 10 and confidence percentage with grade Bear Score — same for bearish direction Verdict — system's current market assessment (High Confidence Long/Short, Lean Long/Short, Mixed, Squeeze, Weak Trend) Last Signal — direction, grade, confidence %, score, active factors, entry price, and bars since signal ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔔 Alert Conditions Edge Long Signal — confluence triangle long entry fires Edge Short Signal — confluence triangle short entry fires Bullish Breakout — confirmed resistance breakout Bearish Breakout — confirmed support breakdown Bullish Retest — post-breakout bullish retest confirmed Bearish Retest — post-breakout bearish retest confirmed RSI Bull Divergence — bullish RSI divergence detected RSI Bear Divergence — bearish RSI divergence detected All alert messages include {{ticker}} and {{interval}} for clean webhook integration. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚡ Key Features 🔬 Six-layer confluence engine — S/R, breakout, trend structure, EMA, momentum, squeeze must agree before a signal fires 🏷 Smart S/R zones — auto-merged, touch-confirmed, polarity-flipping, age-managed ⚠ Stretch filter — warns when breakouts occur at EMA-extended levels with visual label modification 🧠 10-factor confluence scoring with weighted confidence percentage and A+ to D grading 📊 Anti-fake breakout engine — body strength, volume, margin close, and RSI/ADX filter required ◆ Bollinger Squeeze integration — coiled volatility detection with directional momentum bias 📐 Three-EMA structural ribbon (21 / 50 / 200) with fan analysis 💎 RSI divergence detection with pivot-confirmed highs and lows 🕯 Candlestick pattern recognition — engulfing, pin bar, strong body candles 📋 Real-time 12-metric dashboard with live verdict and last signal tracker 🔔 8 alert conditions with ticker and interval placeholders ⚙ Fully configurable — all periods, thresholds, zone parameters, stretch filters, label sizes, and colors adjustable ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚙ Settings Reference Support / Resistance S/R Swing Length — pivot detection sensitivity (default: 7) Merge Zones Within (x ATR) — how close two levels must be to merge (default: 1.2) Max Active Zones — maximum number of zones displayed simultaneously (default: 6) Zone Max Age (bars) — bars before an untouched zone is removed (default: 250) Min Touches to Confirm — touches required before a zone is considered confirmed (default: 2) Show S/R Zones / Show S/R Level Lines — visibility toggles Breakout Detection Show Breakout Labels — toggle breakout label display Require Volume on Breakout — whether volume confirmation is required (default: on) Breakout Volume Multiplier — volume threshold relative to average (default: 1.4x) Breakout Cooldown (bars) — minimum bars between breakout labels (default: 10) Show Retest Labels / Retest Window (bars) — retest detection controls Trend Structure Trend Swing Length — pivot length for structure analysis (default: 12) Show Trend Lines / Show Trend Shift Labels — visibility toggles Trend Label Cooldown — minimum bars between trend labels (default: 18) Momentum RSI Length (default: 14) — Show RSI Divergence toggle ADX Length (default: 14) — ADX Trend Threshold (default: 22) Volume Volume MA Length (default: 20) — Show Volume Spike Dots toggle Squeeze Filter Bollinger Band Length / Multiplier — BB parameters for squeeze detection Keltner Channel Length / Multiplier — KC parameters for squeeze detection EMA Settings Fast / Medium / Slow EMA lengths (defaults: 21 / 50 / 200) with individual visibility toggles Stretch Filter Stretch: Fast EMA Distance (x ATR) — how far price must be from Fast EMA to trigger stretch warning (default: 2.0) Stretch: EMA Spread (x ATR) — how wide the EMA ribbon must be to trigger stretch warning (default: 3.0) Confluence Engine Min Confluence Score — minimum out of 10 factors required for a signal (default: 4) Show Entry Signals — toggle triangle signals Signal Cooldown (bars) — minimum bars between entry signals (default: 12) Display Show Dashboard — toggle dashboard visibility Dashboard Position — Top Right / Top Left / Bottom Right / Bottom Left Dashboard Text Size — Tiny / Small / Normal Dashboard Background color Label Size — controls size of all chart labels (Tiny / Small / Normal, default: Tiny) Theme Bull Primary / Bright / Dim — yellow-green family for all bullish elements Bear Primary / Bright / Dim — red family for all bearish elements Support / Resistance / Untested Zone Colors Neutral color for inactive states Individual EMA colors ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🎯 Recommended Settings by Instrument XAUUSD 1m–5m — defaults work well. Increase ADX threshold to 25 on 5m for cleaner trend filter. Forex Majors — reduce S/R Swing Length to 5, reduce Breakout Volume Multiplier to 1.2 Indices (NAS100, US30) — increase Trend Swing Length to 15–18, increase Min Confluence to 5 Higher Timeframes (1H+) — increase all swing lengths by 30–50%, increase signal cooldowns More signals — reduce Min Confluence Score to 3, reduce ADX threshold to 18 Cleaner signals — increase Min Confluence Score to 5–6, enable volume requirement ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 👥 Who This Is For 🥇 Breakout traders — the anti-fake breakout engine with volume, body strength, and RSI/ADX filters is built specifically to eliminate the false breakouts that destroy breakout strategies 📉 Pullback and retest traders — the retest detection system with polarity-flipping zones provides textbook entries at confirmed levels 📊 Trend followers — trend structure analysis with EMA ribbon and ADX ensures signals only fire in genuine trending conditions 🧠 Systematic traders — the 10-factor scoring and confidence grading give a quantitative framework, not just colored arrows 📈 Traders who want clean charts — everything is on one indicator with a consistent visual language. No indicator soup. ⚠ Traders who struggle with overtrading — the confluence requirements, ADX filter, squeeze gate, and cooldown timers physically prevent low-quality signals from appearing ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📝 Notes All signals are confirmed on bar close — no repainting S/R zones use extend.right — they project forward until broken or aged out The squeeze engine compares Bollinger Bands against Keltner Channels on every bar — no external squeeze indicator required RSI divergence uses confirmed pivot highs and lows with a minimum separation requirement — single-bar spikes do not qualify Maximum 500 labels, boxes, and lines are used — on very low timeframes with extended history, oldest drawings may be removed by TradingView's rendering limits The confidence percentage and grade are recalculated on every bar in real time — the dashboard always reflects the current bar's conditions ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠ Disclaimer This indicator is a technical analysis and visualization tool intended for educational and informational purposes only. It does not constitute financial advice or a recommendation to buy or sell any financial instrument. All signals are generated from historical and real-time price data using mathematical calculations — their accuracy or profitability is not guaranteed. Past performance of any signal type does not guarantee future results. Always conduct your own analysis, use proper risk management, and consult a licensed financial advisor before making any trading decisions. The author accepts no responsibility for any losses incurred from the use of this indicator. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Built for traders who need more than arrows — a full analytical system that thinks before it signals.
Indicador Pine Script®
por AlphaX-Trade
13
[ A L P H A X ] Reversal - RSI Divergence + WPR Timing EngineAlphaX Reversal — RSI Divergence Engine, Triple WPR Timing System, Multi-Confluence Confidence Scoring & Smart Entry/Exit Signals AlphaX Reversal is a professional-grade reversal detection and signal system built on a dual-engine architecture combining RSI Divergence analysis with a triple-timeframe Williams %R timing system. It detects both regular and hidden divergences, scores every signal through a real-time multi-factor confidence engine, and produces clean tier-graded entry labels and exit markers — all governed by intelligent filters that eliminate low-quality setups automatically. Designed for reversal traders and swing scalpers on instruments like XAUUSD, indices, and forex majors. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔬 The Two-Engine Architecture — How It Works AlphaX Reversal is powered by two independent engines that must both agree before any signal fires. Engine 1 — RSI Divergence Detector The first engine continuously monitors RSI pivot highs and lows against price pivot highs and lows, detecting four divergence types in real time: Regular Bullish Divergence — price makes a lower low while RSI makes a higher low (classic exhaustion reversal) Regular Bearish Divergence — price makes a higher high while RSI makes a lower high (classic distribution signal) Hidden Bullish Divergence — price makes a higher low while RSI makes a lower low (trend continuation after pullback) Hidden Bearish Divergence — price makes a lower high while RSI makes a higher high (distribution within a downtrend) When a valid divergence pair is found, a line is drawn on the price chart between the two pivot points — immediate visual confirmation of the structure that triggered the signal. Engine 2 — Triple WPR Timing System The second engine runs three Williams %R oscillators simultaneously at different periods: WPR Fast — the primary signal generator, reacting quickly to momentum shifts WPR Medium — intermediate confirmation, filtering out fast WPR noise WPR Slow — macro trend direction, used to gate counter-trend entries A divergence signal from Engine 1 must be confirmed by a qualifying WPR condition from Engine 2 — a cross from an extreme zone, rising velocity, or a multi-bar recovery. This two-layer gate is what prevents AlphaX Reversal from firing on every minor oscillator wiggle. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📊 Four Divergence Types AlphaX Reversal detects and distinguishes between four divergence structures, each labeled directly on the signal: REG Bull — Regular Bullish. Price exhaustion at a new low while momentum is already recovering. Strongest reversal signal. REG Bear — Regular Bearish. Price making new highs on declining momentum. Classic distribution. HID Bull — Hidden Bullish. A pullback within an uptrend — trend continuation setup. HID Bear — Hidden Bearish. A bounce within a downtrend — continuation of the bear move. Regular divergences receive a higher base confidence score than hidden divergences, reflecting their stronger reversal probability. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🏷 Signal Tiers — S / A / B Every entry signal is graded into one of three tiers based on its real-time confidence score: S-Tier (70%+) — the highest quality setups. All major confluence factors aligned. Brightest label, strongest visual weight. A-Tier (55–69%) — strong setups with most factors confirmed. Standard brightness. B-Tier (35–54%) — valid setups that meet the minimum threshold. Dimmer label color. Tier, divergence type, and confidence score are all displayed directly on every label — you always know the quality of the setup at a glance, without checking the dashboard. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🧠 Multi-Confluence Confidence Scoring Every signal is scored by a real-time engine evaluating eight independent factors. Only signals meeting your configured Min Confidence % threshold are displayed. Divergence Type Quality (up to 30 points) Regular divergence — 30 points Hidden divergence — 22 points WPR Extreme Depth (up to 20 points) How deeply the Fast WPR penetrated into oversold or overbought territory before recovering — deeper penetration scores higher WPR Cross Timing (up to 15 points) Cross from extreme zone — 15 points Strong WPR velocity — 10 points Multi-bar recovery in progress — 6 points WPR Multi-Timeframe Alignment (up to 10 points) All three WPR timeframes simultaneously in extreme territory (Triple OS/OB) — 10 points Medium WPR in extreme zone — 7 points WPR Slow Structural Context (up to 8 points) Slow WPR aligned with the signal direction adds structural confirmation Candle Confirmation (up to 7 points) Strong-bodied candle closing in the signal direction — 7 points Weaker confirming close — 4 points Volume (up to 5 points) Volume spike (1.5× average) — 5 points Above-average volume — 3 points RSI Depth Bonus (up to 5 points) RSI below 25 (bull) or above 75 (bear) adds a bonus for extreme readings that reinforce the divergence Penalty Deductions RSI at opposite extreme — up to 10 points deducted WPR Slow against the signal direction — up to 8 points deducted Extreme WPR velocity (likely spike or wick) — up to 5 points deducted The default minimum confidence is 35% — optimized for XAUUSD 1-minute to filter noise while keeping valid reversal setups. Increase to 45–55% for cleaner signals on higher timeframes. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🚪 Exit Markers Red dot markers indicating where the WPR system detects counter-trend momentum building — time to consider taking profit or tightening stops Exit markers appear as small red dots and fire only after a position is open: During a long position — a bearish WPR signal triggers an exit dot above the bar During a short position — a bullish WPR signal triggers an exit dot below the bar Two independent exit modes are available and can be toggled separately: Exit on Opposite Signal — exits the current position when a full opposing entry signal fires Exit on WPR Exhaustion — exits when WPR crosses into the opposing extreme zone beyond your configured threshold Use exit markers to take partial or full profit, tighten your stop loss, or pause new entries until the next signal confirms continuation. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📋 Live Dashboard The built-in dashboard displays full system state in real time: RSI — current value with color-coded extremes WPR Fast / Medium / Slow — all three values with directional coloring WPR Velocity — FLAT / RISING / FALLING / FAST with color grading Divergence Status — the active divergence type on the current bar Bull Confidence % — live score for the current bullish setup Bear Confidence % — live score for the current bearish setup Position — LONG / SHORT / FLAT tracking the active signal direction Open P&L — real-time unrealized profit and loss in price and percentage Volume — NORMAL / HIGH / SPIKE with current ratio vs 20-bar average The dashboard can be positioned in any corner and text size is independently configurable. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🚀 How to Trade with AlphaX Reversal — Step by Step Step 1 — Watch for a Divergence Line When a divergence line appears connecting two pivots on the chart, Engine 1 has detected a valid structure Check the dashboard Divergence Status row to confirm the type Step 2 — Enter on the Signal Label When the label fires, both engines have confirmed the setup The label shows tier (S/A/B), divergence type (REG/HID), and confidence score directly on the bar Place your stop loss beyond the price pivot that formed the divergence Step 3 — Manage with the Dashboard Monitor WPR Velocity and WPR Fast — rising values confirm the reversal is following through Flat or reversing velocity warns that momentum is stalling early Step 4 — Exit on the Red Dot When a red exit dot appears, counter-trend momentum has built sufficiently to trigger the exit engine Take partial or full profit, or tighten your stop Step 5 — Reset and Wait After an exit, wait for the next divergence structure before re-entering Do not force entries between signals ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚡ Key Features 🔬 Dual-engine architecture — RSI Divergence and triple WPR timing must both confirm before any signal fires 📐 Four divergence types — Regular Bullish, Regular Bearish, Hidden Bullish, Hidden Bearish — detected and labeled distinctly 🏷 Three signal tiers (S / A / B) — confidence-graded labels with visual weight matching signal quality 🧠 Multi-factor confidence scoring — divergence type, WPR depth, velocity, timing, candle body, volume, RSI depth, and penalties 📉 Divergence lines drawn automatically — visual confirmation of the exact pivot pair that triggered the signal 🔴 Smart exit markers — red dots that fire only after a position is open, triggered by WPR exhaustion or opposing signal 📋 Full live dashboard — RSI, three WPR values, velocity, divergence status, confidence scores, position, P&L, and volume in one panel ⏱ Signal cooldown filter — prevents repeated signals during volatile whipsaw conditions 🎨 Cohesive dual-tone color theme — yellow-green for bullish, red for bearish, gray for exits and neutral states 🔔 17 alert conditions — tiered entry alerts, exit alerts, divergence detection alerts, and WPR extreme alerts ⚙ Fully configurable — all periods, thresholds, divergence widths, colors, and exit modes adjustable ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚙ Settings Reference RSI Divergence RSI Period — base RSI calculation period (default: 9) RSI Pivot Lookback — pivot detection sensitivity (default: 3) Max Divergence Width — maximum bars between the two pivot points (default: 40) Min Divergence Width — minimum bars between the two pivot points (default: 5) Show Divergence Lines — toggle the connecting lines on the price chart WPR Timing WPR Fast / Medium / Slow Period — three independent WPR periods (defaults: 8 / 21 / 55) WPR Oversold / Overbought Levels — extreme zone thresholds (defaults: -82 / -18) Signal Filters Min Confidence % — minimum score to display a signal (default: 35%) Signal Cooldown — minimum bars between consecutive signals (default: 6) Require Volume Confirm — optional volume gate using a minimum ratio vs 20-bar average Exits Exit on Opposite Signal — exit the current position when an opposing signal fires Exit on WPR Exhaustion — exit when WPR crosses into the opposing extreme zone WPR Exit Bull / Bear Levels — configurable WPR thresholds for the exhaustion exit Appearance & Dashboard Label Size — Tiny / Small / Normal Dashboard Text Size — Tiny / Small / Normal Show Dashboard — toggle the live overlay panel Dashboard Position — Top Left / Top Right / Bottom Left / Bottom Right ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔔 Alert Conditions S-Tier Bull Reversal — bullish signals scoring 70%+ A-Tier Bull Reversal — bullish signals scoring 55–69% B-Tier Bull Reversal — bullish signals scoring 35–54% S-Tier Bear Reversal — bearish signals scoring 70%+ A-Tier Bear Reversal — bearish signals scoring 55–69% B-Tier Bear Reversal — bearish signals scoring 35–54% Any Bull Reversal — all bullish entry signals combined Any Bear Reversal — all bearish entry signals combined Any Reversal Signal — all entries combined Bull Exit — long position exit signal Bear Exit — short position exit signal Any Exit — all exits combined Regular Bull Divergence Detected Regular Bear Divergence Detected Hidden Bull Divergence Detected Hidden Bear Divergence Detected Triple WPR Oversold — all three WPR periods simultaneously in oversold territory Triple WPR Overbought — all three WPR periods simultaneously in overbought territory All alert messages include {{ticker}} and {{interval}} placeholders for clean webhook integration. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🎯 Default Settings — Optimized For The default configuration is specifically tuned for XAUUSD (Gold) on the 1-minute and 5-minute timeframes : Confidence threshold at 35% filters low-quality setups while keeping valid reversal signals Cooldown at 6 bars prevents label spam during volatile back-and-forth conditions WPR periods (8 / 21 / 55) calibrated for gold's fast-moving intraday reversal structure Divergence width of 5–40 bars captures the relevant reversal structures without reaching too far back For other instruments or timeframes, adjust: Higher timeframes (15m, 1H) — increase RSI Pivot Lookback to 4–5, increase Min Confidence to 40–50%, widen Max Divergence Width to 50–60 Forex majors — defaults work well; reduce RSI Period to 7 for faster detection Indices (NAS100, US30) — increase WPR Slow to 89 for broader trend context Less noise — increase Min Confidence %, increase Cooldown, reduce Max Divergence Width More signals — decrease Min Confidence %, decrease Cooldown, widen divergence window ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 👥 Who This Is For 🥇 Gold (XAUUSD) reversal traders — built and tested on gold's sharp intraday reversal character 📉 Forex and index swing traders — applicable to any instrument that exhibits momentum divergence at turning points 🧠 Systematic traders — the tiered confidence scoring gives a quantitative quality framework, not just visual arrows 📈 Traders who want to know why — every signal shows its tier, divergence type, and score directly on the label ⚠ Traders who struggle with overtrading — the dual-engine confirmation gate and confidence threshold physically prevent weak signals from appearing ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📝 Notes All signals are confirmed on bar close — no repainting Divergence lines connect the actual price pivot points used to generate the signal The position tracker and P&L display are internal to the indicator and do not connect to your broker account Maximum 500 labels and 500 lines — on very low timeframes with extended history, oldest drawings may be removed automatically by TradingView's rendering limits ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠ Disclaimer This indicator is a technical analysis and visualization tool intended for educational and informational purposes only. It does not constitute financial advice or a recommendation to buy or sell any financial instrument. All signals are generated from historical and real-time price data using mathematical calculations — their accuracy or profitability is not guaranteed. Past performance of any signal type does not guarantee future results. Always conduct your own analysis, use proper risk management, and consult a licensed financial advisor before making any trading decisions. The author accepts no responsibility for any losses incurred from the use of this indicator. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Built for traders who want to see the divergence, understand the confirmation, and act with confidence.
Indicador Pine Script®
por AlphaX-Trade
4
[ A L P H A X ] Vision - Smart Entry/Exit SignalsAlphaX Vision — Fusion Trend Engine, Smart Entry/Exit Signals, Multi-Confluence Confidence Scoring & Choppy Market Detection AlphaX Vision is a professional-grade trend following and signal system built on a proprietary Fusion Moving Average engine that blends five different moving average types into a single adaptive trend baseline. It delivers three distinct signal layers — Trend Change labels, Re-Entry triangles, and Exit markers — each governed by a multi-factor confidence scoring system and institutional-grade filters. Designed for intraday traders on fast-moving instruments like XAUUSD, indices, and forex majors. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📸 Visual Overview Full chart view showing Fusion Cloud, trend labels, re-entry triangles, and exit markers on XAUUSD 1-minute ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔬 The Fusion Engine — How It Works At the core of AlphaX Vision is the Fusion Moving Average — a proprietary composite baseline calculated by averaging five independent moving average types on every bar: EMA — Exponential Moving Average for fast responsiveness SMA — Simple Moving Average for stability and noise reduction WMA — Weighted Moving Average for recent-price emphasis ALMA — Arnaud Legoux Moving Average for Gaussian-smoothed precision VWAP — Volume Weighted Average Price for institutional volume anchoring The raw Fusion value is then split into two smoothed layers: Fusion Slow — the primary trend baseline (heavier smoothing) Fusion Fast — the responsive layer that reacts to momentum shifts first When price is above Fusion Slow and the slope is rising → the trend is bullish (yellow-green theme) When price is below Fusion Slow and the slope is falling → the trend is bearish (red theme) When neither condition is met → the market is neutral (gray — no signals fire) The space between Fusion Fast and Fusion Slow forms the Fusion Cloud — a gradient-shaded area that visually represents trend strength and direction at a glance. Fusion Cloud expanding during a strong trend — wider cloud = stronger momentum ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📊 Three Signal Layers AlphaX Vision produces three distinct types of signals, each with a specific role in the trade lifecycle: 1 ─ Trend Change Labels ( B U L L / B E A R ) Compact trend change labels marking the start of a new bullish or bearish phase These are the primary directional signals . A " B U L L " label appears below the bar when the Fusion system detects a confirmed shift from bearish or neutral to bullish. A " B E A R " label appears above the bar for the opposite shift. How the trend change is detected: Price crosses above Fusion Slow while the Fusion Slow slope turns upward → Bullish Price crosses below Fusion Slow while the Fusion Slow slope turns downward → Bearish A cooldown timer prevents repeated labels during choppy transitions — configurable via Trend Label Cooldown Once a trend label fires, it sets the directional context for all subsequent signals. During a BULL trend, only long entries and long exits are generated. During a BEAR trend, only short entries and short exits are generated. This eliminates counter-trend noise entirely. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2 ─ Re-Entry Triangles (▲ / ▼) Small re-entry triangles appearing after the initial trend label — opportunities to add or re-enter in the direction of the trend After a trend is established by the Fusion label, the AlphaX Pro engine monitors for high-confidence re-entry opportunities within that trend. These appear as small triangles: ▲ Yellow-green triangle below bar — Re-entry long signal during a BULL trend ▼ Red triangle above bar — Re-entry short signal during a BEAR trend Re-entry signals are generated by six independent trigger types, all running simultaneously: Divergence Trigger — WPR divergence against price (price makes new low but WPR makes higher low, or vice versa) Extreme Snap — Fast WPR recovers from deeply oversold/overbought territory while higher timeframe WPR confirms trend support Exhaustion Recovery — Price shows exhaustion at a level while the broader trend remains intact Trend Continuation — Fast WPR crosses back from a pullback zone while slow and turtle WPR confirm a strong ongoing trend Pullback Entry — A moderate pullback within an established trend with sufficient velocity to confirm the bounce Triple Alignment — All three WPR timeframes (fast, slow, turtle) reach extreme levels simultaneously and begin recovering together Each trigger feeds into the Confidence Scoring System (explained below). Only signals that meet your minimum confidence threshold are displayed — weak or ambiguous setups are automatically filtered out. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3 ─ Exit Markers (✕) Gray X marks indicating where the Pro engine detects momentum exhaustion against the current trend — time to consider taking profit or tightening stops Exit signals appear as small gray ✕ marks and fire only after at least one re-entry signal has occurred in the current trend. This prevents premature exit markers from appearing before you have even entered. During a BULL trend — a sell-side signal from the Pro engine triggers an exit ✕ above the bar During a BEAR trend — a buy-side signal from the Pro engine triggers an exit ✕ below the bar Exit markers indicate that counter-trend momentum is building . They do not necessarily mean the trend is over — but they warn that the current move may be losing steam. Use them to: Take partial or full profit Tighten your stop loss Pause new entries until the next re-entry triangle confirms continuation ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🧠 Multi-Confluence Confidence Scoring Every re-entry and exit signal is scored by a real-time confidence engine that evaluates multiple independent factors and produces a score from 0 to 100. Only signals meeting your configured Min Pro Confidence % threshold are displayed. The scoring factors include: Trend Alignment (up to 25 points) Turtle WPR (200-period) position — measures the macro trend direction Higher scores when the long-term trend strongly supports the signal direction Oversold/Overbought Depth (up to 20 points) How deeply the Fast WPR penetrated into extreme territory before recovering Deeper penetration = higher score = stronger spring-loaded reversal potential Signal Type Quality (up to 20 points) Triple Alignment and Trend Continuation score highest (18–20 points) Divergence scores 17 points Extreme Snap scores 14 points Pullback scores 8 points Multiple simultaneous triggers add a stacking bonus — 2 triggers = +8 points, 3+ triggers = +15 points Velocity Quality (up to 15 points) The speed at which Fast WPR is moving — "IDEAL" velocity scores 15, "STRONG" scores 10, "EXTREME" (too fast, likely to reverse) scores only 3 Velocity thresholds are session-adaptive — adjusted automatically based on whether the current session is London/NY overlap (highest volatility) or Asian session (lowest volatility) Session Quality (up to 10 points) London/NY overlap = 10 points (best liquidity and follow-through) London session = 8.5 points NY afternoon = 6 points Asian session = 3 points (signals during Asia receive a penalty) EMA Alignment (up to 5 points) Price position relative to 200 EMA and 50/200 EMA cross — confirms structural trend Penalty Deductions Extreme velocity (likely spike/wick) — up to -10 points RSI already at opposite extreme — up to -8 points Asian session or NY close timing — up to -10 points Low volume — -5 points The default minimum confidence is set to 35% — optimized for XAUUSD 1-minute to filter noise while still capturing valid setups. Increase to 45–55% for even cleaner signals on higher timeframes, or reduce to 20–25% for more aggressive scalping. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🛡 Trend Alignment Gate An additional layer of protection called the Trend Alignment Gate prevents counter-trend signals from firing during strong established trends. If Turtle WPR and Slow WPR both confirm a strong downtrend → buy signals are blocked unless the Fast WPR shows a confirmed recovery move from extreme oversold (recovery must exceed a minimum move threshold within a configurable lookback window) If both confirm a strong uptrend → sell signals are blocked unless Fast WPR shows confirmed recovery from overbought Strict Mode tightens the gate thresholds further for maximum noise reduction This gate is enabled by default and is one of the key reasons AlphaX Vision produces significantly fewer false signals than typical oscillator-based systems. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠ Identifying Choppy / Ranging Markets — When NOT to Trade Choppy market condition — EMAs converging, Fusion Cloud collapsed, no clear trend labels. This is when you step aside. Knowing when to stay out is just as important as knowing when to enter. AlphaX Vision gives you clear visual cues that the market is in a choppy, range-bound state: How to identify choppy conditions: Fusion Cloud disappears or becomes paper-thin — when Fusion Fast and Fusion Slow are nearly overlapping, the cloud collapses. No cloud = no trend = no edge. EMAs converge and flatten — when the Fast EMA (yellow-green dots), Medium EMA (gray line), and Slow EMA (dark gray line) all cluster together and move sideways, the market has no directional bias. Frequent color switches — if the Fusion system is rapidly alternating between bullish and bearish with labels appearing in quick succession, the trend cooldown filter is doing its job blocking most of them, but the underlying message is clear: no clean trend. No re-entry triangles appearing — even after a trend label fires, if the Pro engine cannot find a single re-entry opportunity that meets the confidence threshold, the "trend" is likely a false start. Cloud color is gray (neutral) — when neither bullish nor bearish conditions are met, the Fusion lines turn gray. This is the indicator explicitly telling you: this is a no-trade zone. What to do during choppy markets: Do not force entries — wait for the cloud to expand and a clean trend label to form Look for the EMAs to fan out and separate — this confirms that a new directional move is developing Wait for the first re-entry triangle after a trend label before committing capital — the triangle confirms the trend has real momentum behind it Consider switching to a higher timeframe temporarily to find structure — if the 1-minute is chopping, the 5-minute or 15-minute may show a clear trend that the 1-minute will eventually follow ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📐 EMA System Three Exponential Moving Averages are plotted as structural context: Fast EMA (21) — yellow-green cross marks — the immediate momentum reference. When price holds above the Fast EMA, intrabar momentum favors longs. Medium EMA (55) — gray line — the intermediate trend filter. Slope direction confirms trend momentum. Slow EMA (200) — dark gray line, thicker — the structural backbone. The 200 EMA is used by the confidence scoring system and acts as the macro trend divider. EMA Fan Analysis: When all three EMAs are fanning outward in order (Fast > Medium > Slow for bullish, reverse for bearish) — the trend is healthy and re-entry signals carry higher confidence When EMAs are converging — trend is weakening, expect chop or reversal When EMAs are tangled and flat — range-bound market, stay out ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🚀 How to Trade with AlphaX Vision — Step by Step Step 1 — Assess Market Condition Check the Fusion Cloud: Is it expanded and colored, or collapsed and gray? Check the EMAs: Are they fanned out or tangled? If choppy → do not trade. Wait for structure. Step 2 — Wait for a Trend Label A " B U L L " or " B E A R " label sets your directional bias Do not enter on the label itself — it confirms the trend, but the optimal entry comes next SCREENSHOT_7_TRADE_FLOW Complete trade flow: Trend label → Re-entry triangle → Price move → Exit marker Step 3 — Enter on Re-Entry Triangle The first ▲ or ▼ triangle after a trend label is your primary entry signal This is a confirmed, confidence-scored setup aligned with the macro trend Place your stop loss beyond the recent swing high/low or below/above the Fusion Slow line Step 4 — Manage with Subsequent Triangles Additional re-entry triangles during the same trend are opportunities to add to your position or re-enter after a partial take-profit Each triangle has passed the same confidence filters as the first Step 5 — Exit on ✕ Mark When a gray ✕ appears, the Pro engine has detected counter-trend momentum Take partial or full profit If the trend is still active (no opposing trend label), wait for the next re-entry triangle to confirm continuation before re-entering Step 6 — Trend Ends When an opposing trend label appears (e.g., " B E A R " after you were in a BULL trend), the trend has reversed Close any remaining position from the prior trend The new label resets the cycle — wait for re-entry triangles in the new direction ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚡ Key Features 🔬 Proprietary Fusion MA engine blending EMA + SMA + WMA + ALMA + VWAP into one adaptive baseline ☁ Gradient trend cloud with 5-layer depth shading — instant visual trend strength 🏷 Clean, compact trend labels with spaced lettering — professional and non-intrusive ▲▼ Confidence-scored re-entry triangles — only high-quality setups pass the filter ✕ Smart exit markers — fire only after entry, detect counter-trend momentum buildup 🧠 Multi-factor confidence scoring — trend, depth, velocity, session, volume, EMA alignment, signal stacking ⏱ Session-adaptive velocity thresholds — automatically adjusts for London, NY, Asia, and overlap sessions 🛡 Trend Alignment Gate with Strict Mode — blocks counter-trend noise during strong moves 📐 Three EMAs (21 / 55 / 200) for structural context and fan analysis 🎨 Cohesive dual-tone color theme — yellow-green for bullish, red for bearish, gray for neutral/exits 🔔 6 alert conditions — trend changes, entries, and exits with clean message formatting ⚙ Fully configurable — all periods, thresholds, colors, and filters are adjustable from the settings panel ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚙ Settings Reference Fusion System Fusion MA Length — base period for all five moving averages (default: 40) Fusion Slow Sensitivity — smoothing period for the slow trend line (default: 12) Fusion Fast Sensitivity — smoothing period for the fast momentum line (default: 5) Show Trend Cloud — toggle the gradient cloud fill between Fusion Fast and Fusion Slow EMA Settings Fast / Medium / Slow EMA — independently toggle visibility and set periods Defaults optimized for XAUUSD 1-minute: 21 / 55 / 200 AlphaX Pro Settings Fast WPR Period (default: 11) — the primary oscillator for signal generation Slow WPR Period (default: 48) — intermediate trend confirmation Turtle WPR Period (default: 180) — macro trend direction Oversold / Overbought Levels — thresholds for WPR cross triggers (default: -90 / -10) Trend Detection Period — lookback for slope calculation (default: 25) Min Pro Confidence % — minimum score a signal must achieve to be displayed (default: 35%) Trend Alignment Gate — enable/disable counter-trend blocking Strict Mode — tighten gate thresholds for maximum noise reduction Recovery Requirements — minimum WPR recovery move and lookback for counter-trend signal validation Trend Filters Trend Label Cooldown — minimum bars between consecutive trend labels (default: 25) Theme Colors Bull Primary / Bright / Dim — the yellow-green family for all bullish elements Bear Primary / Bright / Dim — the red family for all bearish elements Neutral color — gray for exits, inactive states, and choppy conditions Individual EMA colors — Fast (yellow-green), Medium (gray), Slow (dark gray) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔔 Alert Conditions Fusion → Bull Trend — fires when a new BULL trend label appears Fusion → Bear Trend — fires when a new BEAR trend label appears Re-Entry Long — fires on each bullish re-entry triangle Re-Entry Short — fires on each bearish re-entry triangle Exit Long — fires when a long exit ✕ appears Exit Short — fires when a short exit ✕ appears All alert messages include {{ticker}} and {{interval}} placeholders for clean webhook integration. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🎯 Default Settings — Optimized For The default configuration is specifically tuned for XAUUSD (Gold) on the 1-minute timeframe : Confidence threshold at 35% filters out low-quality signals while keeping valid scalping setups Strict Trend Gate enabled to block counter-trend noise during strong gold moves Cooldown at 25 bars prevents label spam during volatile transitions WPR periods (11 / 48 / 180) calibrated for gold's intraday volatility profile Session-adaptive velocity ensures signals respect the different volatility regimes across Asia, London, and NY For other instruments or timeframes, adjust: Higher timeframes (5m, 15m) — increase Fusion Length to 50–60, increase confidence to 40–50% Forex majors — reduce Fusion Length to 30–35, keep confidence at 30–35% Indices (NAS100, US30) — use defaults or increase Turtle WPR to 200 for broader trend context Less noise — increase Min Confidence %, enable Strict Mode, increase Cooldown More signals — decrease Min Confidence %, disable Strict Mode, decrease Cooldown ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 👥 Who This Is For 🥇 Gold (XAUUSD) scalpers and intraday traders — built and tuned specifically for gold's volatility and session structure 📉 Forex traders — works on all major and minor pairs with minor setting adjustments 📊 Index traders — applicable to US30, NAS100, SPX500, DAX, and others 🧠 Systematic traders — the confidence scoring system provides a quantitative framework, not just visual signals 📈 Traders who value clean charts — no indicator soup, no overlapping signals, no clutter. One cohesive system with a consistent color theme ⚠ Traders who struggle with overtrading — the choppy market detection and confidence filters physically prevent low-quality signals from appearing ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📝 Notes Session-adaptive features use UTC/GMT time — the indicator automatically detects whether the current bar falls within Asia, London, NY overlap, NY afternoon, or NY close windows Designed primarily for intraday timeframes — M1 through H1. On daily or weekly charts the session-adaptive features are less meaningful but the Fusion trend system still functions The Fusion engine uses ta.vwap which resets on each new session — this is by design, as it anchors the Fusion baseline to institutional volume flow within the current session All calculations are non-repainting — signals are confirmed on bar close Maximum 500 labels and 500 bars lookback are used — on very low timeframes with extended chart history, oldest labels may be automatically removed by TradingView's rendering limits ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠ Disclaimer This indicator is a technical analysis and visualization tool intended for educational and informational purposes only. It does not constitute financial advice or a recommendation to buy or sell any financial instrument. All signals are generated from historical and real-time price data using mathematical calculations — their accuracy or profitability is not guaranteed. Past performance of any signal type does not guarantee future results. Always conduct your own analysis, use proper risk management, and consult a licensed financial advisor before making any trading decisions. The author accepts no responsibility for any losses incurred from the use of this indicator. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Built for traders who demand clarity, confidence, and precision from their charts.
Indicador Pine Script®
por AlphaX-Trade
12
Trend Sniper v2.5 [Jamallo](2025) Intro Trend Sniper v2.5 is built around a novel-unique core construction — the Butterworth Stop : a ratcheting trailing stop anchored to a 2-Pole Butterworth Super Smoother and dynamically sized by Parkinson Volatility. While each algorithm used is individually well-documented, this specific combination is rare and not found in standard indicator libraries — most Butterworth implementations are simply plotted as trend lines, not used as the structural anchor of a volatility-adaptive stop mechanism. Break down: 2-Pole Butterworth Super Smoother (Core Trend Line) (smoothed price) The backbone of the indicator is a 2-Pole Butterworth Super Smoother, a concept brought into trading by engineer and author John Ehlers, first published in his 2004 book Cybernetic Analysis for Stocks and Futures In this indicator: The Butterworth filter runs on close with a user-defined period (default 20) and produces bw_trend — a clean, lag-minimized version of price. This smoothed value is not plotted directly. Instead, it acts as the anchor point for the trailing stop. The stop is placed at bw_trend ± stop_dist , meaning the stop hugs the filtered trend rather than raw price, making it far less susceptible to wick noise and erratic bars. Without this pre-filtering step, the trailing stop would oscillate erratically on volatile bars. Parkinson Volatility (Sizes the Stop Distance) "Developed by physicist Michael Parkinson in 1980, it estimates volatility using the natural logarithm of the high-to-low ratio each period, capturing intraday range rather than just close-to-close movement." In this indicator: Parkinson Volatility is calculated over a rolling window (default 50 bars) and multiplied by stop_mult (default 1.2) to produce stop_dist . When markets are volatile, stop_dist expands and the stop gives price more room. When markets are quiet, it contracts and the stop tightens. Butterworth Stop State Machine (The Main Line You Watch) This is the primary plotted line, It's a classic ratcheting trailing stop built on top of outputs from steps 1 and 2. In this indicator: The logic is a simple state machine with two modes — uptrend and downtrend. In an uptrend, the stop only moves up (never down), tracking at bw_trend − stop_dist . In a downtrend, it only moves down, tracking at bw_trend + stop_dist . When price closes on the wrong side of the stop, the state flips and the stop resets on the other side of the trend line. Because both the anchor bw_trend and the buffer stop_dist are noise-filtered and volatility-adjusted, the BW Stop flips far less often than a raw price-based trailing stop would, keeping you in trends longer. Chande Momentum Oscillator + Deadband (Colors the BW Stop Line) "The CMO measures momentum by calculating the difference between the sum of gains and the sum of losses over a specified period, dividing by their total to produce a normalized scale from -100 to +100 that accounts for both up and down days simultaneously." In this indicator: CMO is calculated on bw_stop itself (not raw price), over 14 bars by default. A deadband of ±10 is applied — the line only turns bull-colored when CMO exceeds +10, and bear-colored when it drops below −10. It does not change color in between. KAMA Midpoint (The Dynamic Midline and Fill Zone Anchor) "Introduced by Perry Kaufman in 1995, KAMA dynamically adjusts its smoothing based on the relative efficiency of price movement". In this indicator: Rather than applying KAMA to price directly, it's applied to the midpoint between the BW Stop and the Slow SuperTrend. This midpoint is a computed halfway value between the two lines. KAMA then smooths that midpoint adaptively, producing `kama_mid`. The fill colors you see on the chart are drawn between kama_mid and bw_stop — not between price and anything else. Dual SuperTrend (Signals and Fill State Logic) "Created by Olivier Seban, SuperTrend combines ATR-based volatility with trend detection into a single line that repositions dynamically as price confirms or breaks the current trend direction." In this indicator: Two SuperTrend lines run simultaneously. The Slow ST (9× ATR) is the macro trend reference. The Fast ST (6× ATR) is never plotted at full size — it's compressed halfway toward the BW Stop and shown as orange circles fast_shortened Putting It All Together The flow through the indicator is linear: Butterworth smooths price → Parkinson sizes the stop → the state machine builds the stop line → CMO colors it → KAMA anchors the midline fill → the dual SuperTrend fires signals and shades conviction. END Every component feeds the next, meaning the final signals and visuals are the product of five sequential filters rather than any single calculation — which is what gives the indicator its resistance to false signals in noisy market conditions.
Indicador Pine Script®
por Jamallo22
6
Fair Value Gap Signals [UAlgo]Fair Value Gap Signals is a price action indicator that detects bullish and bearish Fair Value Gaps and then tracks how price behaves inside those gaps over time. Instead of only drawing static imbalance boxes, the script treats each FVG as a stateful object with live metrics, lifecycle states, mitigation logic, and optional rejection signals. This makes it useful for traders who want both structural FVG mapping and real time interaction analysis after the gap is created. The indicator runs on price ( overlay=true ) and automatically identifies classic 3 candle FVG formations. Each detected gap is stored in an internal object with its own box, CE midline, metric bars, status, and signal label handling. As price revisits a gap, the script measures how deeply price penetrates the zone, how much volume is accumulated during tests, and how strong the test candles are in terms of directional body expansion (velocity style scoring). A key design goal of this script is practical decision support. It can show: Fresh gaps Testing behavior Filled or invalidated gaps Rejection events (potential reversal signals) Live VVD style metrics (Velocity, Volume, Depth / Safety) inside the FVG It also includes an ATR filter to ignore small gaps, visibility limits to keep charts clean, optional CE midline plotting, and alert conditions for major gap events. 🔹 Features 🔸 1) Automatic Bullish and Bearish FVG Detection The script detects standard 3 candle Fair Value Gaps using simple price displacement logic: Bullish FVG when current low is above high from two bars ago Bearish FVG when current high is below low from two bars ago When a gap is confirmed, it is stored as a custom Gap object and immediately drawn on the chart with its own box, CE midline, and metric containers. 🔸 2) Stateful FVG Lifecycle Tracking Each gap is tracked through multiple statuses instead of being treated as a static box: Fresh Testing Tested Rejected Filled This allows the indicator to model how price interacts with a gap over time and not just where the gap originally formed. 🔸 3) Configurable Mitigation Method (Close or Wick) Users can choose how FVG mitigation is confirmed: Close means invalidation requires a close through the far boundary Wick means a wick touch through the far boundary is enough This is a very useful option because traders often use different mitigation definitions depending on instrument and timeframe. 🔸 4) ATR Based Gap Size Filter An optional ATR filter removes smaller gaps that may be insignificant in volatile conditions. When enabled, the script ignores bullish or bearish FVGs whose size is smaller than the current ATR value (using the chosen ATR length). This helps reduce noise and keeps the display focused on stronger imbalances. 🔸 5) CE Midline (Consequent Encroachment) Support Each FVG can display a dotted midline representing the center of the gap (Consequent Encroachment). This gives traders an additional reference inside the imbalance and is commonly used as a reaction level in ICT style workflows. The CE line can be turned on or off with a dedicated input. 🔸 6) VVD Metrics Inside Each Gap (Velocity, Volume, Depth) One of the strongest features of this script is the live metric visualization inside every active gap. The indicator tracks and displays three bar style metric boxes: Velocity Volume Depth (rendered as a safety style score from penetration depth) These metrics update as price tests the gap and provide a quick visual estimate of test quality, participation, and penetration risk. 🔸 7) Rejection Signal Detection with Context When price enters a gap and then rejects from it with sufficient test volume, the script can print a directional signal label. Bullish gaps can generate Buy or Strong Buy labels and bearish gaps can generate Sell or Strong Sell labels. Signal strength is influenced by the velocity metric, and the tooltip includes extra details such as velocity score, volume score, safety score, and test count. 🔸 8) Test Counting and Multi Test Awareness The indicator keeps track of how many times a gap has been tested. This can help traders distinguish first touch behavior from repeated interactions that may weaken the setup. The test count can also be displayed as text inside the main FVG box when metrics are enabled. 🔸 9) Visibility Control for Cleaner Charts To avoid clutter, the script limits how many active bullish and bearish gaps are visually displayed at once using Max Visible FVGs . It scans from newest to oldest and only shows the most recent valid gaps per side. Older or non visible gaps still exist in logic and continue updating internally, but their visuals are hidden. 🔸 10) Smart Object Cleanup and Retained Signal Labels The script enforces an internal gap limit and removes older gap objects when needed. Gap boxes, CE lines, and metric boxes are deleted during cleanup, while rejection labels are intentionally allowed to remain on the chart for historical context. This gives users a cleaner display while preserving past signal markers. 🔸 11) Alert Conditions for Key FVG Events Built in alert conditions are provided for: New FVG formed FVG testing (price enters a gap) FVG filled (mitigated / invalidated) FVG rejection signal (potential reversal) This makes the script suitable for active monitoring across multiple charts or watchlists. 🔹 Calculations 1) Bullish and Bearish FVG Detection Logic The script uses classic 3 candle gap conditions: bool fvgBull = low > high bool fvgBear = high < low Interpretation: A bullish FVG exists when the current candle low leaves a gap above the high from two bars ago. A bearish FVG exists when the current candle high leaves a gap below the low from two bars ago. When detected, the script creates a Gap object and stores: Top boundary Bottom boundary Direction Origin index Status and metrics Visual objects (main box, metric boxes, midline, label handle) 2) ATR Filter for Minimum Gap Size If the ATR filter is enabled, the script compares gap size with ATR and rejects undersized gaps: float atrVal = ta.atr(atrLength) float gapSizeBull = low - high float gapSizeBear = low - high if fvgBull and gapSizeBull < atrVal fvgBull := false if fvgBear and gapSizeBear < atrVal fvgBear := false This creates a volatility adjusted threshold for FVG relevance. 3) Gap Object Initialization and Visual Construction When a new gap is created, the setup method initializes both state and visuals: Main FVG box CE midline Three metric boxes (Vel, Vol, Dpt) The main box is drawn from the origin index to a small forward projection: g.paramBox := box.new(left = idx, top = top, right = bar_index + 5, bottom = bottom, ...) The CE line is placed at the midpoint: float midY = (top + bottom) / 2 The metric area is split into three horizontal segments inside the gap height so each metric can expand in width over time. 4) Gap Status Model and State Transitions Each gap starts as Fresh . As price interacts with the gap, the script can move it through: Testing when price enters the zone Tested when price leaves after a test Rejected when rejection conditions are met Filled when mitigation occurs This logic is implemented inside the update() method, which runs every bar for each stored gap. 5) Test Detection and First Touch Handling The script avoids counting the forming bar as a test: bool canTest = bar_index > g.index + 1 A gap is considered under test when the current candle range overlaps the gap: bool isInside = canTest and (h >= g.bottom and l <= g.top) When price first enters a fresh gap: if g.status == "Fresh" g.status := "Testing" g.testCount := 1 g.testStartVolume := volume eventCode := 1 This event code is later used for the FVG Testing alert condition. 6) Velocity Metric Calculation Velocity is a bar quality style score calculated during gap tests. It combines body dominance and a directional bonus: float bodyRatio = math.abs(close - open) / barRange Directional bonus: Bullish gap gets bonus if the test candle closes bullish Bearish gap gets bonus if the test candle closes bearish float currentVelocity = math.min(bodyRatio + directionBonus, 1.0) The gap stores the maximum velocity observed across all tests: if currentVelocity > g.maxVelocity g.maxVelocity := currentVelocity Interpretation: Higher velocity suggests stronger directional response while testing the gap. 7) Volume Metric Calculation During tests, the script accumulates test volume: if isInside g.testVolume += volume Later, it compares the accumulated test volume to an expected volume estimate: float expectedVol = volAvg * math.max(1, (bar_index - g.index) / 2) float volScore = math.min(g.testVolume / expectedVol, 1.0) This creates a normalized volume score used in both the metric bar length and the rejection label tooltip. 8) Depth Metric and Safety Score Calculation Depth tracks how far price penetrates into the gap during tests. For bullish gaps: Depth is measured from gap top downward when price dips below the top boundary. For bearish gaps: Depth is measured from gap bottom upward when price rises above the bottom boundary. Examples: if g.isBullish if l < g.top currentDepth := g.top - l else if h > g.bottom currentDepth := h - g.bottom The maximum penetration depth is stored: if currentDepth > g.maxDepth g.maxDepth := currentDepth The displayed metric is a safety style score: float depthRatio = g.maxDepth / gapSize float safetyScore = math.max(0.0, 1.0 - depthRatio) Interpretation: Deeper penetration reduces safety score and may imply weaker rejection quality. 9) Fill / Mitigation Logic (Close or Wick) A gap is marked Filled when price crosses the far boundary in the inverse direction, according to the selected mitigation method: if mitType == "Close" filledInverse := g.isBullish ? (close < g.bottom) : (close > g.top) else filledInverse := g.isBullish ? (l < g.bottom) : (h > g.top) When filled: Status becomes Filled Gap is deactivated Event code becomes 2 Gap visuals are deleted This event code feeds the FVG Filled alert condition. 10) Rejection Signal Logic Rejection is checked only while the gap is active and price is inside the gap. The script also requires enough accumulated test volume: if isInside and g.testVolume > volAvg * 0.5 Rejection condition: Bullish gap rejection if price probes below the gap top and closes back above the gap top Bearish gap rejection if price probes above the gap bottom and closes back below the gap bottom bool rejected = g.isBullish ? (l < g.top and close > g.top) : (h > g.bottom and close < g.bottom) When rejection is confirmed: Gap status becomes Rejected Optional signal label is drawn (Buy, Strong Buy, Sell, Strong Sell) Event code becomes 3 This event code feeds the FVG Rejection Signal alert condition. 11) Signal Strength and Tooltip Metrics When a rejection signal is printed, the script builds a tooltip with normalized scores: Velocity score from maxVelocity Volume score from testVolume versus expectedVol Safety score from gap penetration depth Test count It also upgrades the signal text to Strong Buy or Strong Sell when max velocity exceeds 0.6: if g.maxVelocity > 0.6 icon := g.isBullish ? "Strong Buy" : "Strong Sell" This provides a compact label with deeper context available on hover. 12) Visibility Limiting and Render Hiding The script iterates through gaps from newest to oldest and shows only the most recent active bullish and bearish gaps up to maxVisible per side. Non visible gaps are not deleted, but their visuals are hidden by setting colors and text to na . This is useful for traders who want a focused view of current opportunities without losing older gap state tracking in the background. 13) Metric Bar Rendering Logic Each metric box grows horizontally from the gap origin according to a normalized score: Velocity length from maxVelocity Volume length from volScore Depth / Safety length from safetyScore Example: int len1 = int(math.max(1, maxWidth * velScore)) g.rankBox1.set_right(g.index + len1) If metric display is disabled, the script hides the metric boxes and text while keeping the gap logic active. 14) Array Cleanup and Object Management The script enforces a strict gap storage limit with GAP_LIMIT . When exceeded, the oldest gap is removed and its visuals are deleted: if gaps.size() > GAP_LIMIT gaps.cleanup() The cleanup method deletes: Main gap box CE midline Velocity metric box Volume metric box Depth metric box Rejection info labels are intentionally preserved for historical review. 15) Alert Conditions The script exposes four alert conditions: alertcondition(fvgBull or fvgBear, "New FVG Formed", ...) alertcondition(anyTesting, "FVG Testing", ...) alertcondition(anyFilled, "FVG Filled", ...) alertcondition(anySignal, "FVG Rejection Signal", ...) These alerts are driven by the live event codes returned from each gap's update() call and make the indicator suitable for workflow automation.
Indicador Pine Script®
por UAlgo