Empiece

Buscar en scripts para "chart"

Liquidity Sweep Sniper AP StyleAP Capital – Liquidity Sweep Sniper (Fab-Style) 📌 Overview This indicator is a precision scalping tool inspired by professional liquidity-based trading concepts often demonstrated by elite intraday scalpers. The script focuses on liquidity sweeps followed by strong displacement, aiming to capture short, high-probability momentum moves — particularly effective on lower timeframes (1–5 min) during active market sessions. It is not a signal spam tool. Signals appear only when multiple objective conditions align. 🧠 Core Concept Markets do not move randomly — they seek liquidity before expanding. This indicator identifies: Buy-side / Sell-side liquidity Liquidity sweeps (stop-hunts) Strong displacement candles reclaiming price Optional higher-timeframe trend alignment Only when all conditions are met does a signal print. 🔍 What the Indicator Detects 1️⃣ Liquidity Pools Equal highs or equal lows detected within a configurable lookback Minimum number of touches required ATR-based tolerance to adapt to volatility These levels represent areas where stop orders are likely resting. 2️⃣ Liquidity Sweep A valid sweep requires: Price to wick beyond the liquidity level Candle to close back inside the range This indicates failed breakout / stop-hunt behaviour. 3️⃣ Displacement Confirmation After the sweep, the candle must show: Strong body (default >60% of candle range) Candle range large relative to ATR Clear directional intent (momentum) This filters out weak reactions and chop. 4️⃣ Optional Trend Filter EMA-based higher-timeframe bias Helps align scalps with dominant direction Can be enabled or disabled 📈 Signals BUY: Sell-side liquidity sweep → bullish displacement SELL: Buy-side liquidity sweep → bearish displacement Signals are plotted directly on the chart and can be used with alerts. ⚙️ Recommended Usage Markets: XAUUSD, indices, liquid FX pairs Timeframes: 1m–5m Sessions: London & New York (best performance) Risk Management: Always required — this tool does not place trades Best used as a confirmation tool, not standalone. ⚠️ Important Notes This indicator is inspired by liquidity-based scalping concepts, not an exact replication of any individual trader’s private strategy. No indicator predicts the future — this tool highlights high-probability scenarios, not guarantees. Past performance is not indicative of future results.
Indicador Pine Script®
por APCapitalTrading
HMA Pivot Buy/Sell (only) + AlertsThis Pine Script is a lightweight indicator that plots only HMA-based pivot Buy/Sell signals and provides alert conditions for them. What it does Calculates a Hull Moving Average (HMA) using either: a dynamic length based on the chart timeframe, or a custom user-defined length. Detects HMA pivot points (local turning points): Buy signal when the HMA forms a local minimum (trend turns up). Sell signal when the HMA forms a local maximum (trend turns down). Optionally plots the HMA line and prints only the Buy/Sell markers on the chart (no extra arrows/emoji/labels from other systems). Adds TradingView alerts for Buy, Sell, and combined Buy/Sell events. Signal logic Buy (HMA Pivot Low) triggers when: HMA > HMA and HMA < HMA Meaning: the HMA was falling, formed a bottom, and has started rising. Sell (HMA Pivot High) triggers when: HMA < HMA and HMA > HMA Meaning: the HMA was rising, formed a top, and has started falling. Inputs Source: price source used to compute HMA (default: close). Use Custom HMA Length: enables manual override. Custom HMA Length: manual HMA period (default: 55). Alerts: only on bar close: If enabled, alerts fire only after the bar closes (confirmed signals). If disabled, alerts can fire intrabar (faster but less stable). Draw signal on pivot bar (offset -1): If enabled, markers are drawn on the pivot bar (one bar back) using offset = -1. If disabled, markers are drawn on the confirmation bar (no offset). Show HMA line: toggles display of the HMA line. Alerts available BUY (HMA Pivot) — triggers on Buy signal. SELL (HMA Pivot) — triggers on Sell signal. BUY/SELL (HMA Pivot) — triggers on either Buy or Sell. Each alert message includes ticker, timeframe, and close price via placeholders: {{ticker}}, {{interval}}, {{close}}.
Indicador Pine Script®
por inozemtsev999
2
ML Adaptive SuperTrend Strategy [trade_crush]# ML Adaptive SuperTrend Strategy - User Guide ## Introduction The **ML Adaptive SuperTrend Strategy** is a sophisticated trading tool that combines traditional trend-following logic with **Machine Learning (K-Means Clustering)** to dynamically adapt to market volatility. Unlike standard SuperTrend indicators that use a fixed ATR, this strategy analyzes historical volatility to categorize the current market into distinct clusters, providing more precise entries and exits. > > **Special Thanks:** This strategy is based on the innovative work of **AlgoAlpha**. You can explore their extensive library of high-quality indicators and strategies on TradingView: (www.tradingview.com). --- ## Machine Learning Engine (K-Means) The core of this strategy is its ability to "learn" from recent market behavior. - **K-Means Clustering**: The script takes the last $N$ bars of ATR data and runs an iterative clustering algorithm to find three "centroids" representing **High**, **Medium**, and **Low** volatility. - **Adaptive ATR**: Based on the current volatility, the strategy selects the nearest centroid to use as the ATR value for the SuperTrend calculation. This ensures the trailing stop tightens during low volatility and widens during high volatility to avoid "noise". --- ## Key Features ### 1. Non-Repainting Signals - **Confirm Signals**: When enabled, signals are only triggered after a bar closes. This ensures that the arrows and entries you see on the chart are permanent and reliable for backtesting. ### 2. Intelligent Risk Management - **Multiple SL/TP Types**: Choose between **Percentage** based stops or **ATR** based stops for both Stop Loss and Take Profit. - **Trailing Stop Loss (TSL)**: - Supports both Percentage and ATR modes. - **Activation Offset**: Only activates the trailing mechanism after the price has moved a certain percentage in your favor, protecting early-stage trades. ### 3. Risk-Based Position Sizing - **Dynamic Quantity**: If enabled, the strategy automatically calculates the trade size based on your **Risk % Per Trade** and the distance to your **Stop Loss**. This ensures you never lose more than your defined risk on a single trade. --- ## User Input Guide ### SuperTrend & ML Settings - **ATR Length**: The window used to calculate market volatility. - **SuperTrend Factor**: The multiplier that determines the distance of the trailing stop from the price. - **Use ML Adaptive ATR**: Toggle between the ML-enhanced logic and standard ATR. - **Training Data Length**: How many historical bars the ML engine analyzes to find clusters. ### Risk Management - **Stop Loss Type**: Set to Percentage, ATR, or None. - **TS Activation Offset**: The profit buffer required before the trailing stop starts following the price. - **Use Risk-Based Sizing**: Toggle this to let the script manage your position size automatically. --- ## How to Trade with This Strategy 1. **Monitor the Dashboard**: Check the top-right table to see which volatility cluster the market is currently in. 2. **Observe the Fills**: The adaptive fills (green/red) visualize the "breathing room" the strategy is giving the price. 3. **Execution**: The strategy enters on "ML Bullish" (Triangle Up) and "ML Bearish" (Triangle Down) signals. 4. **Exits**: The script will automatically exit based on your SL, TP, or Trailing Stop settings. --- ## Credits Original Concept: **AlgoAlpha** Strategy Conversion & Enhancements: **Antigravity AI**
Estrategia Pine Script®
por trade_crush
QuantCrawler ORB Break & Retest 15m - Opening Range StrategyThis indicator automates the 15-minute Opening Range Breakout and Retest strategy. It captures the high, low, and midpoint of the first 15-minute candle, then monitors for confirmed breakouts followed by midpoint retests to generate entry signals. HOW IT WORKS 1. Captures the high, low, and midpoint of the first 15-minute candle (default 8:00-8:15 premarket) 2. Waits for price to close beyond the OR high or low by your specified breakout distance 3. After breakout confirmation, monitors for price to pull back and touch the midpoint 4. Signals LONG after bullish breakout + midpoint retest 5. Signals SHORT after bearish breakout + midpoint retest 6. Resets after each signal allowing multiple setups per session WHY 15-MINUTE ORB The 15-minute Opening Range captures more price action than a 5-minute OR, often providing stronger support/resistance levels. The 8:00 AM default captures premarket activity before the 9:30 open, giving you levels established before the crowd arrives. WHY BREAKOUT + RETEST Entering on the initial breakout often results in chop and false signals. This indicator requires confirmation - price must first prove direction by closing beyond the breakout distance, then offer a pullback entry at the midpoint. This filters out many failed breakouts. SETTINGS - Breakout Distance - Points beyond OR zone required to confirm breakout - Timezone - Select your market timezone - Opening Range Time - Customizable (default 8:00-8:15) - Session End Time - When to stop monitoring (default 4:00 PM) VISUAL OUTPUT - Green line - OR High - Red line - OR Low - Orange dotted line - OR Midpoint - Status box displays current state (Watching, Active, Closed) ALERTS Built-in alerts for Long Entry, Short Entry, or Any Entry. Works on any timeframe chart. The indicator pulls 15-minute data automatically using request.security().
Indicador Pine Script®
por QuantCrawler
3
Absorption DetectorSource: Prof Michael G. Credit: GreatestUsername for the coding & implementation. Zones of Support and Resistance can feel like drawing boxes on the chart. This indicator to help spot areas of possible reversal. It uses Volume Confirmation and Body-to-Wick Ratio to do this and defined as: 1. Volume Confirmation High Volume: A candle that absorbs sitting limit orders is often accompanied with higher than average volume. The indicator define this type of candle if it has a volume is greater than 250%/350% of the average volume over the last 10 candles. 2. Body-to-Wick Ratio Body vs. Wick: A candle with a small body and large wicks can indicate higher probability of reversal. You can define an absorption candle if the body of the candle is less than 50% of the total range (high-low). These settings are also customizable to your own desired settings and should be used as a visual aid.
Indicador Pine Script®
por Nuchburg
FVG + Fibonacci Strategy FINALLa estrategia más precisa para S&P 500, Cannabis Stocks (CURA, GTBIF) y Forex volátil ✅ 3 Filtros de Alta Confluencia: Fair Value Gaps (FVG): Detecta gaps >0.5% (75-85% relleno histórico) Fibonacci 61.8%: Golden Zone automática desde swings Volume Spike: 1.5x media + vela direccional Resultados Backtest H1 (2023-2025): text Win Rate: 84% (confluencia completa) Avg R/R: 1:2.8 Drawdown: -5.4% Trades/mes: 8-12 setups premium 🎯 Señales Automáticas: 🟢 BUY: Triángulo verde + SL/TP en label 🔴 SELL: Triángulo rojo + niveles exactos 📱 Alertas: Entry/SL/TP directo al móvil Tabla Live Status (Top Right): FVG activo ✅/❌ Fibo 61.8% cerca ✅/❌ Volumen confirmado ✅/❌ Perfecto para: 📈 S&P 500 H1/D1 🌿 Cannabis stocks volátiles 💱 Forex majors (EURUSD, GBPUSD) Copia → Pine Editor → Add to Chart → Activa Alertas Backtest validado en 1000+ trades. Ratio riesgo/recompensa óptimo 1:2+ ¡Únete a los traders que operan con EDGE real! 💰 The most accurate strategy for S&P 500, Cannabis Stocks (CURA, GTBIF) & Volatile Forex ✅ 3 High-Confluence Filters: Fair Value Gaps (FVG): Detects gaps >0.5% (75-85% historical fill rate) Fibonacci 61.8%: Auto Golden Zone from swings Volume Spike: 1.5x average + directional candle H1 Backtest Results (2023-2025): text Win Rate: 84% (full confluence) Avg R/R: 1:2.8 Drawdown: -5.4% Trades/month: 8-12 premium setups 🎯 Automatic Signals: 🟢 BUY: Green triangle + SL/TP on label 🔴 SELL: Red triangle + exact levels 📱 Alerts: Entry/SL/TP straight to mobile Live Status Table (Top Right): FVG active ✅/❌ Fibo 61.8% nearby ✅/❌ Volume confirmed ✅/❌ Perfect for: 📈 S&P 500 H1/D1 🌿 Volatile cannabis stocks 💱 Forex majors (EURUSD, GBPUSD) Copy → Pine Editor → Add to Chart → Enable Alerts Backtested on 1000+ trades. Optimal 1:2+ risk/reward ratio Join traders operating with REAL EDGE! 💰
Indicador Pine Script®
por Tetramin
BTC - Metcalfes Law (Deviation)Title: BTC – Metcalfe's Law (Deviation) | RM Overview & Philosophy The BTC – Metcalfe's Law (Deviation) is a fundamental valuation oscillator that answers one of the most important questions in network economics: "Is the current price justified by the number of active users?" Metcalfe's Law states that the value of a network is proportional to the square of the number of its connected users (Value = Users squared). In the context of Bitcoin, this means that as the number of active addresses grows linearly, the network's fair value should grow exponentially.This script identifies periods where Bitcoin’s market capitalization has become "overextended" or "undervalued" relative to its actual network activity. Methodology The indicator performs a rolling log-log regression (Ordinary Least Squares) between Bitcoin's Market Cap and its Active Address count over a 730-day (2-year) window. 1. The Regression: The script calculates the statistical relationship: ln(Market Cap) = alpha + beta * ln(Active Addresses) 2. Pure Metcalfe vs. Generalized Metcalfe: • Pure Metcalfe (Beta=2): By default, the script enforces a slope of 2.0, adhering to the classic mathematical law. • Dynamic Fit: Users can disable the "Enforce Metcalfe" setting to let the model find the best historical fit (often resulting in a Beta between 1.5 and 1.8). 3. The Deviation (The Signal): The resulting line represents the Log-Deviation from Fair Value. • A value of 0.0 means Bitcoin is priced exactly according to its network utility. • Positive values indicate a "valuation premium". • Negative values indicate a "valuation discount". How to Read the Chart 🔴 The Red Zone (Overvaluation > 1.0) Meaning: The Market Cap has outpaced the growth of active users. Historically, these peaks represent speculative bubbles or cycle tops where price is driven by hype rather than utility. 🟢 The Green Zone (Undervaluation < -0.25) Meaning: The network is being utilized, but the price has crashed below its fundamental support. Historically, these "Utility Floors" have marked the most profitable accumulation zones in Bitcoin’s history. 🟠 The Orange Line (Fair Value Transition) Meaning: The market is in a healthy growth phase, moving in lockstep with user adoption. Strategy & Interpretation This tool is a Macro Compass . It is designed to help investors stay objective during periods of extreme market emotion. • In a Bull Market: Watch for the deviation to hit the Red Zone. This is your signal that the "Network Utility" can no longer support the price, and a major correction is likely imminent. • In a Bear Market: Look for the "Green Floor." When the price stays below the -0.25 level despite stable user activity, it suggests a massive mismatch between value and price—a classic buy signal. Settings • Regression Window (Default: 730 Days): Chosen to capture mid-to-long term cycle trends. Adjust to shorter timeframes for more dynamic behavior or longer timeframes (like 1460 Days) to catch longer cycles. • Enforce Metcalfe: Toggle between the classic law (Beta=2) and a dynamic fit. • Smoothing: A 30-day SMA is applied to active addresses to filter out daily "jitter." Credits • Robert Metcalfe: For the original law of network utility. • Willy Woo & Greg Wheatley: For their pioneering work in applying Metcalfe's Law specifically to Bitcoin's valuation. Important Data Requirement To function, this indicator requires a data feed for Active Addresses . By default, it is set to GLASSNODE:BTC_ACTIVEADDRESSES . Please Note: On-chain data usually requires a premium vendor subscription on TradingView (e.g., Glassnode, IntoTheBlock, or CryptoQuant). If you do not have a subscription, the indicator will display a "Missing Data" warning. ⚠️ Note: This indicator is optimized for the Daily (1D) Timeframe. Please switch your chart to 1D for accurate signal reading. Disclaimer This script is for research and educational purposes only. It relies on third-party on-chain data. Fundamental valuation is only one piece of the puzzle; market dynamics can remain irrational longer than metrics can predict. Tags bitcoin, btc, on-chain, metcalfe, adoption, fundamental, valuation, active addresses, cycle, Rob Maths
Indicador Pine Script®
por Rob_Maths
Sistema Neutro GOULART HUD Regime Radar ORB VWAPSistema Neutro GOULART is an advanced visual trading indicator that integrates: • A unified HUD displaying session status, ORB, VWAP, risk and market bias • A Regime Radar heatmap (GO / WAIT / NO) designed to provide clarity without chart clutter • ORB with straight daily lines and a clean zone limited to the current session • Direction filtering using VWAP and VWAP slope • Condition assessment based on risk and overall market context • A harmonized visual design focused on objective decision-making ⚠️ This indicator does NOT generate trade signals. It provides market context, regime classification, and quality assessment to support discretionary trading decisions. Ideal for: • Futures markets (ES, NQ, YM) • Day trading using ORB + VWAP • Traders who prioritize context, discipline, and structure over signals For educational purposes only.
Indicador Pine Script®
por alxgoulart
BTC - VDD Multiple (Approx)Overview & Philosophy ⚠️ Note: This indicator is optimized for the Daily (1D) Timeframe. Please switch your chart to 1D for accurate signal reading. The BTC – VDD Multiple (Approx) is an advanced oscillator designed to identify market overheating and cycle tops by analyzing the velocity of value moving through the market. In traditional On-Chain Analysis, Value Days Destroyed (VDD) is a premier metric for spotting macro tops. It multiplies the coin age (how long a coin was held) by the price at which it was moved. When old coins (HODLer money) move at high prices, VDD spikes, signaling massive profit-taking. The Problem: Real "Coin Days Destroyed" (CDD) data is typically locked behind institutional paywalls or unavailable on standard TradingView plans. The Solution: This script calculates a Deterministic Proxy. By analyzing the relationship between Exchange Volume, Price, and a Dormancy Constant, we can approximate the structure of the VDD Multiple without needing a premium data feed. Methodology The VDD Multiple works by comparing short-term market velocity against a long-term baseline. 1. The Proxy Calculation Since we cannot directly access the age of coins on TradingView, we model the economic weight of the move: Proxy Value = Exchange Volume * Price * Dormancy Factor This creates a synthetic representation of "Value Throughput." 2. The Multiple We compare the immediate heat of the market against the yearly trend: • Short-Term MA (2 Days): Captures flash spikes and sudden liquidity exit events. • Long-Term MA (365 Days): Represents the baseline "hum" of network activity. VDD Multiple = Short Term MA / Long Term MA How to Read the Chart The indicator plots the Multiple as a line and uses background highlighting to signal extreme regimes. 🔴 The Red Zone (Overheated > 2.9) Meaning: Current value transfer is ~3x higher than the yearly average. Interpretation: Historically, sharp spikes into the Red Zone correlate with Local or Cycle Tops. This indicates that massive volume is changing hands at high prices—typically a sign of "Smart Money" distributing into "Dumb Money" FOMO. Note: In strong bull runs, price can push higher even after a VDD spike, but the risk/reward ratio is extremely poor here. 🟢 The Green Zone (Undervalued < 0.75) Meaning: Market activity is quiet and below the yearly baseline. Interpretation: These are periods of apathy or accumulation. Historically, extended time spent in the Green Zone (the "flatline") has offered the best asymmetric buying opportunities. 🟠 The Orange Line (Neutral) Meaning: The market is in transition or equilibrium. Strategy & Context This indicator is best used as a Macro Cycle Tool, not a day-trading signal. • Exit Strategy: Look for "Clusters" of Red Spikes. A single spike often marks a local correction, but a cluster of intense spikes while price makes new highs (Divergence) is a strong Cycle Top warning. • Entry Strategy: Historically the best entries occur when the indicator flattens out in the Green Zone for weeks or months. This suggests sellers are exhausted and the market has reached a floor. Credits This script is an approximation of the original VDD Multiple concept. Full credit for the underlying on-chain theory goes to the pioneers of this metric: • Concept: The original Value Days Destroyed metric was popularized by Hans Hauge and Glassnode. • The Multiple: The specific application of a Short/Long MA Multiple on VDD is widely attributed to analysts like TXMC and Bitbo. This script adapts these concepts for the free TradingView environment using exchange volume proxies. Settings • Data Source: Defaults to BINANCE:BTCUSDT to capture high-volume liquidity. • Short MA: Default is 2 Days to capture rapid velocity spikes. • Long MA: Default is 365 Days to track the annual trend. Disclaimer This tool is an approximation based on exchange volume, not raw blockchain data. While exchange volume and on-chain volume are highly correlated during cycle extremes, they are not identical. This script is for educational and research purposes only. Past performance does not guarantee future results. Tags bitcoin, btc, onchain, vdd, cdd, valuation, cycle, top, bottom, Rob Maths
Indicador Pine Script®
por Rob_Maths
Custom ORBIT GSK-VIZAG-AP-INDIA🚀 Custom ORBIT — Opening Range Breakout & Reversal Indicator This indicator automatically calculates and plots the Opening Range (OR) high and low levels for a user-defined session and duration. It is designed to assist intraday traders by providing immediate visual signals for both price breakouts and subsequent reversals from these key levels. The indicator is particularly suitable for markets with defined trading hours, such as the Indian indices (Nifty, Bank Nifty), given its default time settings are based on GMT+5:30. ⚙️ How It Works (Indicator Logic) The indicator operates based on three main logical components: time definition, level calculation, and signal generation. 1. Time Session and Range Definition: All time calculations are based on GMT+5:30 (Indian Standard Time/IST). The script defines a specific trading session from a customizable start time (default 9:15 AM) to a session end time (default 3:30 PM). The Opening Range (OR) is established during the initial duration, which is set by the rangeMinutes input (default 15 minutes, meaning the OR is calculated from 9:15 AM to 9:30 AM). 2. Level Calculation and Plotting: During the initial range duration, the script captures the absolute highest price (OR High) and the absolute lowest price (OR Low). Once this period ends, two horizontal lines—a green line for the OR High and a red line for the OR Low—are drawn and automatically extended across the chart for the remainder of the active trading session. The visual style of these lines can be customized to Dotted, Dashed, or Solid. 3. Breakout and Reversal Logic: The indicator actively tracks the market's state relative to the OR levels to generate four distinct signals: Break Up: A signal is generated when the closing price crosses over the OR High, indicating potential upward momentum. Break Down: A signal is generated when the closing price crosses under the OR Low, indicating potential downward momentum. Reversal Down: This yellow signal occurs only after a price has already broken above the OR High (Break Up state), and then the price moves back into the range (closing below the ORH), suggesting a failed breakout. Reversal Up: This yellow signal occurs only after a price has already broken below the OR Low (Break Down state), and then the price moves back into the range (closing above the ORL), suggesting a failed breakdown. 💡 Suggested Use Cases The signals generated by this indicator can be used in two primary ways: Breakout Trading: A trader may enter a long position on a "Break Up" signal or a short position on a "Break Down" signal. A common risk management practice is to use the opposite OR level (ORL for long trades, ORH for short trades) as a stop-loss reference. Faded Breakout / Reversal Trading: Look for the yellow "Reversal Up" or "Reversal Down" signals. These signals indicate a rejection of the OR level, and a trader may take a counter-trend position with the expectation that the price will return to the consolidation range or move toward the opposite OR level. ⚠️ Educational Disclaimer This indicator is for educational and illustrative purposes only. It provides technical signals based on mathematical calculation of price action and should not be construed as financial advice, trading advice, or a solicitation to buy or sell any financial instrument. Trading carries a high level of risk, and you may lose more than your initial deposit. Past performance is not indicative of future results. Always consult with a qualified financial professional before making any investment decisions.
Indicador Pine Script®
por prowelltraders
Pivot Points High LowGaneshA Pivot Points High/Low indicator that: Detects swing highs (ta.pivothigh) and swing lows (ta.pivotlow) using configurable left/right bar lengths. Draws labels at the confirmed pivot points: Down labels at pivot highs (potential resistance). Up labels at pivot lows (potential support). Lets you customize text color and label fill color separately for highs and lows. It’s designed for overlay (on-price chart), with max_labels_count=500 to allow many labels.
Indicador Pine Script®
por manojnibrad
Smart Money Swing Strategy [All-in-One]# Pro Swing Trader 📈 A comprehensive swing trading indicator for TradingView that combines multiple confluence factors to identify high-probability trade setups with built-in risk management. ## 🎯 Overview This indicator is designed for swing traders who want to catch momentum pullbacks with precision entries. It filters trades using multiple timeframe analysis, RSI zones, volume confirmation, and EMA trends to deliver only the highest-confidence setups. ### Key Features ✅ **Multi-Timeframe Confluence** - Confirms trades with higher timeframe analysis (Daily, 4H, etc.) ✅ **Smart Entry Signals** - Detects pullback-to-EMA reclaim patterns ✅ **Automatic Risk Management** - Calculates stops, targets, and R-multiples ✅ **Dynamic Stop Loss** - ATR trailing stop + break-even automation ✅ **Real-Time HUD Dashboard** - Live confluence scoring and trade metrics ✅ **Comprehensive Alerts** - Entry, TP1, TP2, and stop-loss notifications ✅ **Visual Trade Levels** - Clear on-chart stop-loss and take-profit lines --- ## 📊 How It Works ### Signal Logic The indicator identifies two types of signals: **Base Signals** (Small triangles): - Price pulls back between Fast EMA and Slow EMA - RSI is in the swing zone (40-60 by default) - Price reclaims the Fast EMA with momentum - Optional: Volume spike confirmation **High-Confidence Signals** (Large triangles): - All base signal criteria met - Higher timeframe confirms the trend direction - HTF RSI and slope alignment - These are your primary trade signals ### Entry Conditions #### Long Entry (🟢 HC L) 1. Fast EMA > Slow EMA (uptrend) 2. Previous candle closed between the EMAs (pullback) 3. Current candle crosses above and closes above Fast EMA (reclaim) 4. RSI between 40-60 (swing zone) 5. **HTF Confirmation**: Daily/4H price above EMA50, RSI > 50, positive slope 6. Optional: Volume > 1.5x 20-bar average #### Short Entry (🔻 HC S) 1. Fast EMA < Slow EMA (downtrend) 2. Previous candle closed between the EMAs (pullback) 3. Current candle crosses below and closes below Fast EMA (reclaim) 4. RSI between 40-60 (swing zone) 5. **HTF Confirmation**: Daily/4H price below EMA50, RSI < 50, negative slope 6. Optional: Volume > 1.5x 20-bar average --- ## 🎛️ Settings & Parameters ### Trend Parameters - **Fast EMA**: Default 20 - Quick trend detection - **Slow EMA**: Default 50 - Major trend filter - **Swing Lookback**: Default 10 - Bars to find swing high/low for stops ### RSI Settings - **RSI Length**: Default 14 - **RSI Min**: Default 40 - Lower bound of swing zone - **RSI Max**: Default 60 - Upper bound of swing zone ### Risk Management - **Final TP Risk-Reward (R)**: Default 2.0 - Main profit target multiplier - **TP1 R Multiple**: Default 1.0 - Partial profit target - **Use Break-even Stop**: Move stop to entry after 1R profit - **ATR Trailing Stop**: Dynamic stop based on ATR(14) x 2.0 ### Filters - **Require Volume Spike**: Optional volume confirmation filter - **Use Higher TF Confirmation**: Enable multi-timeframe analysis - **Higher TF**: Default "D" (Daily) - Can use 240 (4H), W (Weekly), etc. --- ## 📈 Dashboard (HUD) The top-center dashboard shows real-time confluence status: | Column | Meaning | |--------|---------| | **Trend** | Current trend direction (UP/DOWN/Flat) | | **HTF** | Higher timeframe alignment (Bull/Bear/Flat) | | **RSI Zone** | Is RSI in swing zone? (YES/NO) | | **Volume** | Volume spike detected? (YES/NO) | | **Signal** | Active signal type (HC LONG/HC SHORT/None) | | **R Risk** | Current profit in R-multiples | | **Stop** | Current stop-loss level | | **TP1** | Partial take-profit status | | **TP2** | Final take-profit status | | **Conf %** | Overall confluence score (0-100%) | ### Confidence Score Breakdown - **20%** - Trend present (up or down) - **30%** - HTF confirmation aligned (or 15% if HTF off) - **20%** - RSI in swing zone - **10%** - Volume spike - **20%** - High-confidence signal triggered **Scoring**: - 🟢 70%+ = High probability setup - 🟡 40-69% = Moderate setup - 🔴 <40% = Low probability --- ## 🔔 Alert Setup The indicator includes 8 alert conditions: ### Entry Alerts - **HC LONG ENTRY** - High-confidence long signal triggered - **HC SHORT ENTRY** - High-confidence short signal triggered ### Profit Target Alerts - **LONG TP1 Reached** - Hit partial profit (1R by default) - **LONG Final TP Reached** - Hit final target (2R by default) - **SHORT TP1 Reached** - Hit partial profit - **SHORT Final TP Reached** - Hit final target ### Stop Loss Alerts - **LONG Stop/BE/Trail Level Hit** - Long position stopped out - **SHORT Stop/BE/Trail Level Hit** - Short position stopped out ### How to Set Up Alerts 1. Click "Add Alert" on TradingView 2. Choose this indicator from the dropdown 3. Select desired alert condition 4. Set alert to trigger "Once Per Bar Close" 5. Customize notification method (popup/email/webhook) --- ## 📋 Trading Workflow ### 1. Wait for High-Confidence Signal Look for the large **HC L** or **HC S** triangle on chart close. ### 2. Verify Confluence Check the HUD dashboard: - Confidence score should be 70%+ - HTF status should show alignment - RSI Zone should be "YES" ### 3. Entry Enter the trade at market or on next candle open. ### 4. Set Stop Loss Use the **initial stop** shown in the HUD (red line on chart): - **Longs**: Below the swing low (10-bar lookback) - **Shorts**: Above the swing high (10-bar lookback) ### 5. Set Take Profits - **TP1**: 1R (50% position close) - Yellow line - **TP2**: 2R (remaining 50% close) - Green line ### 6. Manage the Trade - Monitor the **R Risk** column to track profit - Stop moves to break-even automatically after 1R (if enabled) - ATR trailing stop engages dynamically (red line adjusts) - Exit if price hits dynamic stop level --- ## 🎨 Visual Guide ### On-Chart Elements **Triangles**: - Small lime/red triangles = Base signals (lower confidence) - Large lime/red triangles = High-confidence signals (trade these!) **Lines**: - 🟢 Green line = Fast EMA (20) - 🟠 Orange line = Slow EMA (50) - 🔴 Red line = Dynamic stop-loss level - 🟡 Yellow line = TP1 level - 🟢 Green line = TP2 (final target) **HUD Colors**: - 🟢 Green = Bullish/Active/Good - 🔴 Red = Bearish/Inactive/Warning - 🟡 Yellow = Neutral/Caution - 🔵 Blue = Informational - ⚫ Gray = Disabled/Off --- ## 💡 Strategy Tips ### Best Practices 1. **Only trade High-Confidence signals** - Ignore base signals unless very experienced 2. **Respect the HTF** - Don't fight the higher timeframe trend 3. **Use proper position sizing** - Risk 1-2% of account per trade 4. **Partial profits work** - Take 50% off at TP1, let rest run to TP2 5. **Let winners run** - Trailing stop helps capture extended moves 6. **Be patient** - Quality over quantity; wait for 70%+ confluence ### Optimal Timeframes - **Primary Chart**: 1H, 4H, Daily (swing trading) - **HTF Setting**: One level higher than your chart - If trading 1H → Set HTF to 4H or D - If trading 4H → Set HTF to D or W - If trading Daily → Set HTF to W ### Market Conditions **Best Performance**: - Trending markets with healthy pullbacks - Clear support/resistance zones - Moderate volatility **Avoid Trading**: - Extremely choppy/sideways markets - Major news events (unless experienced) - Low confidence scores (<40%) --- ## ⚙️ Advanced Customization ### Aggressive Setup (More Signals) ``` Fast EMA: 12 Slow EMA: 26 RSI Min: 35 RSI Max: 65 Use HTF Confirmation: OFF Require Volume Spike: OFF ``` ### Conservative Setup (Fewer, Higher Quality) ``` Fast EMA: 20 Slow EMA: 50 RSI Min: 45 RSI Max: 55 Use HTF Confirmation: ON Require Volume Spike: ON Final TP R: 3.0 ``` ### Scalping Adaptation (Not Recommended) ``` Fast EMA: 9 Slow EMA: 21 Swing Lookback: 5 TP1 R: 0.5 Final TP R: 1.0 ``` --- ## ⚠️ Risk Disclaimer **IMPORTANT**: This indicator is for educational and informational purposes only. - Past performance does not guarantee future results - No indicator is 100% accurate - Always use proper risk management - Never risk more than you can afford to lose - Consider using a demo account first - Seek professional financial advice if needed Trading involves substantial risk of loss and is not suitable for all investors. --- ## 🔧 Troubleshooting ### "No signals appearing" - Check if HTF confirmation is enabled but market isn't aligned - Verify RSI zone isn't too restrictive - Ensure volume spike isn't filtering out all setups - Try adjusting EMA lengths for your asset ### "Too many false signals" - Enable HTF confirmation - Tighten RSI zone (e.g., 45-55) - Enable volume spike requirement - Only trade 70%+ confidence setups ### "Stops too tight/wide" - Adjust Swing Lookback length - Modify ATR multiplier for trailing stop - Consider the asset's volatility ### "Alerts not working" - Ensure alert is set to "Once Per Bar Close" - Check indicator is added to the chart - Verify TradingView notification settings --- ## 📚 Version History **v1.0 (Current)** - Initial release - Multi-timeframe confluence system - Dynamic risk management - Real-time HUD dashboard - Comprehensive alert system - ATR trailing stops - Break-even automation --- ## 🤝 Support & Feedback If you find this indicator helpful: - ⭐ Star the script on TradingView - 💬 Share your results and feedback - 🐛 Report bugs or suggest improvements - 📖 Share with other traders --- ## 📖 Additional Resources ### Recommended Reading - "The New Trading for a Living" by Dr. Alexander Elder - "Swing Trading Using Multiple Timeframes" - Educational articles - Risk management and position sizing guides ### Learn More About - Multiple timeframe analysis - EMA crossover strategies - RSI divergence and zones - ATR-based stops - R-multiple profit management --- ## 📝 License This indicator is provided as-is for personal trading use. **Usage Rights**: - ✅ Use for personal trading - ✅ Modify for personal use - ❌ Resell or redistribute - ❌ Claim as original work --- ## 🎓 Quick Start Checklist - Add indicator to TradingView chart - Set your preferred timeframe (1H/4H/Daily) - Configure HTF setting (one level higher) - Review default parameters - Set up entry alerts (HC LONG/SHORT) - Set up TP and SL alerts - Test on historical data - Paper trade first - Start with small position sizes - Track your results --- **Happy Trading! 📊💰** *Remember: Discipline, patience, and risk management are the keys to long-term success.*
Indicador Pine Script®
por frankieho_92
1
FOMC Sweep Reaction AP Capital – FOMC Sweep Reaction v1.0 AP Capital – FOMC Sweep Reaction v1.0 is a news-reaction and liquidity-based trading tool designed specifically to track and trade FOMC volatility on Gold (XAUUSD) and other highly reactive instruments. The indicator focuses on liquidity sweeps, structure breaks, and EMA reclaims that commonly occur around Federal Reserve interest-rate decisions and Powell speeches, helping traders identify high-probability reversal or continuation moves after the initial spike. 🔍 What This Indicator Detects This tool highlights the most repeatable FOMC behaviours observed across multiple months of broker data: • Sweeps of previous day’s high or low • Stop-hunt wicks into liquidity pools • EMA13 reclaim after the news spike • Break and close beyond short-term structure • Momentum shift following volatility exhaustion The goal is not to predict the news, but to react to confirmed price behaviour after liquidity has been taken. 📌 Core Features • FOMC Sweep Detection Identifies aggressive wicks into prior highs/lows during news volatility • EMA Reclaim Confirmation Uses EMA13 to validate momentum shift after the sweep • Market Structure Awareness Filters reactions that fail to break structure to avoid false reversals • Session-Aligned Logic Designed around London → NY → FOMC release timing • Clean Visuals Minimal chart clutter for fast decision-making during volatile conditions 🧠 How to Use Wait for FOMC release / Powell speech Allow price to sweep previous liquidity (PDH / PDL / local extremes) Observe reclaim of EMA13 Enter only after structure confirmation Manage trade using EMA trailing or structure-based exits ⚠️ This is a reaction system, not a prediction tool. 📊 Best Use Cases • XAUUSD (Gold) • NASDAQ / US indices • High-impact macro news events • 5-min to 15-min timeframes ⚠️ Important Notes • News volatility is extreme — risk management is essential • Not designed for low-volatility or ranging markets • Best combined with a clear trading plan and strict risk rules 📎 Disclaimer This indicator is for educational purposes only and does not constitute financial advice. Trading during high-impact news events involves significant risk.
Indicador Pine Script®
por APCapitalTrading
Density Zones (GM Crossing Clusters) + QHO Spin FlipsINDICATOR NAME Density Zones (GM Crossing Clusters) + QHO Spin Flips OVERVIEW This indicator combines two complementary ideas into a single overlay: *this combines my earlier Geometric Mean Indicator with the Quantum Harmonic Oscillator (Overlay) with additional enhancements* 1) Density Zones (GM Crossing Clusters) A “Density Zone” is detected when price repeatedly crosses a Geometric Mean equilibrium line (GM) within a rolling lookback window. Conceptually, this identifies regions where the market is repeatedly “snapping” across an equilibrium boundary—high churn, high decision pressure, and repeated re-selection of direction. 2) QHO Spin Flips (Regression-Residual σ Breaches) A “Spin Flip” is detected when price deviates beyond a configurable σ-threshold (κ) from a regression-based equilibrium, using normalized residuals. Conceptually, this marks excursions into extreme states (decoherence / expansion), which often precede a reversion toward equilibrium and/or a regime re-scaling. These two systems are related but not identical: - Density Zones identify where equilibrium crossings cluster (a “singularity”/anchor behavior around GM). - Spin Flips identify when price exceeds statistically extreme displacement from the regression equilibrium (LSR), indicating expansion beyond typical variance. CORE CONCEPTS AND FORMULAS SECTION A — GEOMETRIC MEAN EQUILIBRIUM (GM) We define two moving averages: (1) MA1_t = SMA(close_t, L1) (2) MA2_t = SMA(close_t, L2) We define the equilibrium anchor as the geometric mean of MA1 and MA2: (3) GM_t = sqrt( MA1_t * MA2_t ) This GM line acts as an equilibrium boundary. Repeated crossings are interpreted as high “equilibrium churn.” SECTION B — CROSS EVENTS (UP/DOWN) A “cross event” is registered when the sign of (close - GM) changes: Define a sign function s_t: (4) s_t = +1 if close_t > GM_t -1 if close_t < GM_t s_{t-1} if close_t == GM_t (tie-breaker to avoid false flips) Then define the crossing event indicator: (5) crossEvent_t = 1 if s_t != s_{t-1} 0 otherwise Additionally, the indicator plots explicit cross markers: - Cross Above GM: crossover(close, GM) - Cross Below GM: crossunder(close, GM) These provide directional visual cues and match the original Geometric Mean Indicator behavior. SECTION C — DENSITY MEASURE (CROSSING CLUSTER COUNT) A Density Zone is based on the number of cross events occurring in the last W bars: (6) D_t = Σ_{i=0..W-1} crossEvent_{t-i} This is a “crossing density” score: how many times price has toggled across GM recently. The script implements this efficiently using a cumulative sum identity: Let x_t = crossEvent_t. (7) cumX_t = Σ_{j=0..t} x_j Then: (8) D_t = cumX_t - cumX_{t-W} (for t >= W) cumX_t (for t < W) SECTION D — DENSITY ZONE TRIGGER We define a Density Zone state: (9) isDZ_t = ( D_t >= θ ) where: - θ (theta) is the user-selected crossing threshold. Zone edges: (10) dzStart_t = isDZ_t AND NOT isDZ_{t-1} (11) dzEnd_t = NOT isDZ_t AND isDZ_{t-1} SECTION E — DENSITY ZONE BOUNDS While inside a Density Zone, we track the running high/low to display zone bounds: (12) dzHi_t = max(dzHi_{t-1}, high_t) if isDZ_t (13) dzLo_t = min(dzLo_{t-1}, low_t) if isDZ_t On dzStart: (14) dzHi_t := high_t (15) dzLo_t := low_t Outside zones, bounds are reset to NA. These bounds visually bracket the “singularity span” (the churn envelope) during each density episode. SECTION F — QHO EQUILIBRIUM (REGRESSION CENTERLINE) Define the regression equilibrium (LSR): (16) m_t = linreg(close_t, L, 0) This is the “centerline” the QHO system uses as equilibrium. SECTION G — RESIDUAL AND σ (FIELD WIDTH) Residual: (17) r_t = close_t - m_t Rolling standard deviation of residuals: (18) σ_t = stdev(r_t, L) This σ_t is the local volatility/width of the residual field around the regression equilibrium. SECTION H — NORMALIZED DISPLACEMENT AND SPIN FLIP Define the standardized displacement: (19) Y_t = (close_t - m_t) / σ_t (If σ_t = 0, the script safely treats Y_t = 0.) Spin Flip trigger uses a user threshold κ: (20) spinFlip_t = ( |Y_t| > κ ) Directional spin flips: (21) spinUp_t = ( Y_t > +κ ) (22) spinDn_t = ( Y_t < -κ ) The default κ=3.0 corresponds to “3σ excursions,” which are statistically extreme under a normal residual assumption (even though real markets are not perfectly normal). SECTION I — QHO BANDS (OPTIONAL VISUALIZATION) The indicator optionally draws the standard σ-bands around the regression equilibrium: (23) 1σ bands: m_t ± 1·σ_t (24) 2σ bands: m_t ± 2·σ_t (25) 3σ bands: m_t ± 3·σ_t These provide immediate context for the Spin Flip events. WHAT YOU SEE ON THE CHART 1) MA1 / MA2 / GM lines (optional) - MA1 (blue), MA2 (red), GM (green). - GM is the equilibrium anchor for Density Zones and cross markers. 2) GM Cross Markers (optional) - “GM↑” label markers appear on bars where close crosses above GM. - “GM↓” label markers appear on bars where close crosses below GM. 3) Density Zone Shading (optional) - Background shading appears while isDZ_t = true. - This is the period where the crossing density D_t is above θ. 4) Density Zone High/Low Bounds (optional) - Two lines (dzHi / dzLo) are drawn only while in-zone. - These bounds bracket the full churn envelope during the density episode. 5) QHO Bands (optional) - 1σ, 2σ, 3σ shaded zones around regression equilibrium. - These visualize the current variance field. 6) Regression Equilibrium (LSR Centerline) - The white centerline is the regression equilibrium m_t. 7) Spin Flip Markers - A circle is plotted when |Y_t| > κ (beyond your chosen σ-threshold). - Marker size is user-controlled (tiny → huge). HOW TO USE IT Step 1 — Pick the equilibrium anchor (GM) - L1 and L2 define MA1 and MA2. - GM = sqrt(MA1 * MA2) becomes your equilibrium boundary. Typical choices: - Faster equilibrium: L1=20, L2=50 (default-like). - Slower equilibrium: L1=50, L2=200 (macro anchor). Interpretation: - GM acts like a “center of mass” between two moving averages. - Crosses show when price flips from one side of equilibrium to the other. Step 2 — Tune Density Zones (W and θ) - W controls the time window measured (how far back you count crossings). - θ controls how many crossings qualify as a “density/singularity episode.” Guideline: - Larger W = slower, broader density detection. - Higher θ = only the most intense churn is labeled as a Density Zone. Interpretation: - A Density Zone is not “bullish” or “bearish” by itself. - It is a condition: repeated equilibrium toggling (high churn / high compression). - These often precede expansions, but direction is not implied by the zone alone. Step 3 — Tune the QHO spin flip sensitivity (L and κ) - L controls regression memory and σ estimation length. - κ controls how extreme the displacement must be to trigger a spin flip. Guideline: - Smaller L = more reactive centerline and σ. - Larger L = smoother, slower “field” definition. - κ=3.0 = strong extreme filter. - κ=2.0 = more frequent flips. Interpretation: - Spin flips mark when price exits the “normal” residual field. - In your model language: a moment of decoherence/expansion that is statistically extreme relative to recent equilibrium. Step 4 — Read the combined behavior (your key thesis) A) Density Zone forms (GM churn clusters): - Market repeatedly crosses equilibrium (GM), compressing into a bounded churn envelope. - dzHi/dzLo show the envelope range. B) Expansion occurs: - Price can release away from the density envelope (up or down). - If it expands far enough relative to regression equilibrium, a Spin Flip triggers (|Y| > κ). C) Re-coherence: - After a spin flip, price often returns toward equilibrium structures: - toward the regression centerline m_t - and/or back toward the density envelope (dzHi/dzLo) depending on regime behavior. - The indicator does not guarantee return, but it highlights the condition where return-to-field is statistically likely in many regimes. IMPORTANT NOTES / DISCLAIMERS - This indicator is an analytical overlay. It does not provide financial advice. - Density Zones are condition states derived from GM crossing frequency; they do not predict direction. - Spin Flips are statistical excursions based on regression residuals and rolling σ; markets have fat tails and non-stationarity, so σ-based thresholds are contextual, not absolute. - All parameters (L1, L2, W, θ, L, κ) should be tuned per asset, timeframe, and volatility regime. PARAMETER SUMMARY Geometric Mean / Density Zones: - L1: MA1 length - L2: MA2 length - GM_t = sqrt(SMA(L1)*SMA(L2)) - W: crossing-count lookback window - θ: crossing density threshold - D_t = Σ crossEvent_{t-i} over W - isDZ_t = (D_t >= θ) - dzHi/dzLo track envelope bounds while isDZ is true QHO / Spin Flips: - L: regression + residual σ length - m_t = linreg(close, L, 0) - r_t = close_t - m_t - σ_t = stdev(r_t, L) - Y_t = r_t / σ_t - spinFlip_t = (|Y_t| > κ) Visual Controls: - toggles for GM lines, cross markers, zone shading, bounds, QHO bands - marker size options for GM crosses and spin flips ALERTS INCLUDED - Density Zone START / END - Spin Flip UP / DOWN - Cross Above GM / Cross Below GM SUMMARY This indicator treats the Geometric Mean as an equilibrium boundary and identifies “Density Zones” when price repeatedly crosses that equilibrium within a rolling window, forming a bounded churn envelope (dzHi/dzLo). It also models a regression-based equilibrium field and triggers “Spin Flips” when price makes statistically extreme σ-excursions from that field. Used together, Density Zones highlight compression/decision regions (equilibrium churn), while Spin Flips highlight extreme expansion states (σ-breaches), allowing the user to visualize how price compresses around equilibrium, releases outward, and often re-stabilizes around equilibrium structures over time.
Indicador Pine Script®
por Eyemaginative
Victor aimstar past strategy -v1Introducing the ultimate all-in-one DIY strategy builder indicator, With over 30+ famous indicators (some with custom configuration/settings) indicators included, you now have the power to mix and match to create your own custom strategy for shorter time or longer time frames depending on your trading style. Say goodbye to cluttered charts and manual/visual confirmation of multiple indicators and hello to endless possibilities with this indicator. What it does ================== This indicator basically help users to do 2 things: 1) Strategy Builder With more than 30 indicators available, you can select any combination you prefer and the indicator will generate buy and sell signals accordingly. Alternative to the time-consuming process of manually confirming signals from multiple indicators! This indicator streamlines the process by automatically printing buy and sell signals based on your chosen combination of indicators. No more staring at the screen for hours on end, simply set up alerts and let the indicator do the work for you.
Indicador Pine Script®
por hali_aimstar
Ahmed Gold Signals - 5M LIVE (Frequent)📈 Gold (XAUUSD) Trading Signals – Precision-Based Strategy Our Gold signals are built on pure price action, not random indicators or guesswork. 🔍 How our signals are generated We focus on: 🧲 Liquidity Sweeps Identifying when price grabs stop-losses above highs or below lows and then reverses 📊 Clear trend direction using EMA 50 & EMA 200 ✅ Strong confirmation candles after the sweep 🎯 Entries only in the direction of the trend to increase accuracy 🔵 BUY Signals Bullish market structure Price sweeps liquidity below recent lows Strong bullish confirmation candle closes ➡️ High-probability BUY setup 🔴 SELL Signals Bearish market structure Price sweeps liquidity above recent highs Strong bearish confirmation candle closes ➡️ High-probability SELL setup ⏱️ Timeframe 5-minute chart (5M) Fast, precise signals ideal for scalping Gold 🛡️ Risk Management Stop loss placed beyond the liquidity sweep Clear take-profit targets Risk-to-reward typically 1:2 or better ⚠️ Important Notes We do not trade every move We wait for confirmation Quality over quantity — always
Indicador Pine Script®
por kzg4ngnk6h
Ichimoku + VWAP + OBV + ATR Full System (NQ Daytrade)Extended Indicator Description Ichimoku + VWAP + OBV + ATR Full System is a rule-based intraday trading indicator designed specifically for NQ day trading, focusing on trend alignment, participation confirmation, and volatility-aware execution. This indicator does not rely on a single signal or crossover. Instead, it integrates multiple market dimensions into one structured framework to help traders identify high-probability trend continuation scenarios while avoiding low-quality, range-bound conditions. System Philosophy The core idea of this system is simple: trade only when trend, price location, volume, and volatility are aligned. Each component plays a specific role and is not meant to be used in isolation. The indicator works best when all conditions reinforce the same directional bias. Component Breakdown Ichimoku Cloud Used to define the primary market structure and directional bias. The system favors trades only when price action aligns clearly above or below the cloud, helping filter out indecisive or transitional phases. VWAP Acts as a session-based equilibrium reference. Price position and distance relative to VWAP are used to confirm whether the market is trending with intent rather than reverting to the mean. OBV (On-Balance Volume) Provides participation and flow confirmation. OBV helps validate whether price movement is supported by volume, reducing the likelihood of false breakouts or weak trend signals. ATR (Average True Range) Used as a volatility filter and risk-awareness tool. ATR conditions help the system avoid low-volatility environments and support more realistic expectations for intraday movement. Trade Logic Overview The system is designed around trend-following pullbacks, not prediction or counter-trend trading. When trend structure is established and confirmed by VWAP positioning and OBV behavior, pullback zones within the trend become areas of interest. ATR conditions ensure that trades are taken only when sufficient movement potential exists. Rather than generating frequent signals, the system prioritizes selectivity and clarity, making it suitable for disciplined day traders who value context over quantity. Intended Use This indicator is built for: NQ intraday and day trading Trend continuation and pullback strategies Traders who prefer structured, confirmation-based systems Lower to mid intraday timeframes such as 3-minute, 5-minute, and 15-minute charts Important Notes This is not an automated trading system and does not provide guaranteed results. The indicator is designed as a decision-support tool to assist with market context, directional bias, and trade timing. Risk management, execution, and position sizing remain the responsibility of the user. 롱/숏 삼각형 시그널 동그라미 청산 시그널 VWAP 밴드 기반 방향성 OBV 보조지표 이름 (Name) BTC Scalping Signal – VWAP + OBV 짧은 설명 (Short Description) VWAP 밴드와 OBV를 기반으로 방향성, 진입·청산 시그널을 제공하는 스캘핑 지표입니다. 긴 설명 (Long Description) 이 지표는 BTC 단기 스캘핑을 위해 설계된 것으로, 특히 15분봉 환경에 최적화되어 있습니다. VWAP 밴드의 위치와 추세 판별 로직을 기반으로 롱·숏 진입 신호를 제공합니다. OBV 모멘텀을 보조 필터로 사용하여 돌파 및 되돌림 가능성을 판단합니다. 시장 변동성이 축소되거나 평균회귀 신호가 감지될 때 청산 시그널을 표시합니다. 삼각형(진입), 원형(청산) 등 직관적 시각 요소를 통해 빠른 의사결정을 지원합니다.
Indicador Pine Script®
por ninnikuya2294
Trend detection zero lag Trend Detection Zero-Lag (v6) Trend Detection Zero-Lag is a high-performance trend identification indicator designed for intraday traders, scalpers, and swing traders who require fast trend recognition with minimal lag. It combines a zero-lag Hull Moving Average, slope analysis, swing structure logic, and adaptive volatility sensitivity to deliver early yet stable trend signals. This indicator is optimized for real-time decision-making, particularly in fast markets where traditional moving averages react too slowly. Core Features 🔹 Zero-Lag Trend Engine Uses a Zero-Lag Hull Moving Average (HMA) to reduce lag by approximately 40–60% versus standard moving averages. Provides earlier trend shifts while maintaining smoothness. 🔹 Multi-Factor Trend Detection Trend direction is determined using a hybrid engine: HMA slope (momentum direction) Rising / falling confirmation Swing structure detection (HH/HL vs LH/LL) ATR-adjusted dynamic sensitivity This approach allows fast flips when conditions change, without excessive noise. Adaptive Volatility Sensitivity Sensitivity dynamically adjusts based on ATR relative to price In high volatility: faster reaction In low volatility: smoother, more stable trend state This ensures the indicator adapts across: Trend days Range days Volatility expansion or contraction Trend Duration Intelligence The indicator tracks historical trend durations and maintains a rolling memory of recent bullish and bearish phases. From this, it calculates: Current trend duration Average historical duration for the active trend direction This helps traders gauge: Whether a trend is early, mature, or extended Probability of continuation vs exhaustion Strength Scoring A normalized Trend Strength Score (0–100) is calculated using: Zero-lag slope magnitude ATR normalization This provides a quick read on: Weak / choppy trends Healthy trend continuation Overextended momentum Visual Design Color-coded Zero-Lag HMA Bullish trend → user-defined bullish color Bearish trend → user-defined bearish color Designed for dark mode / neon-style charts Clean overlay with no clutter Trend Detection Zero-Lag is built for traders who need: Faster trend recognition Adaptive behavior across market regimes Structural confirmation beyond simple moving averages Clear, actionable visual signals
Indicador Pine Script®
por MomentumCraft_
11-MA Institutional System (ATR+HTF Filters)11-MA Institutional Trading System Analysis. This is a comprehensive Trading View Pine Script indicator that implements a sophisticated multi-timeframe moving average system with institutional-grade filters. Let me break down its key components and functionality: 🎯 Core Features 1. 11 Moving Average System. The indicator plots 11 customizable moving averages with different roles: MA1-MA4 (5, 8, 10, 12): Fast-moving averages for short-term trends MA5 (21 EMA): Short-term anchor - critical pivot point MA6 (34 EMA): Intermediate support/resistance MA7 (50 EMA): Medium-term bridge between short and long trends MA8-MA9 (89, 100): Transition zone indicators MA10-MA11 (150, 200): Long-term anchors for major trend identification Each MA is fully customizable: Type: SMA, EMA, WMA, TMA, RMA Color, width, and enable/disable toggle 📊 Signal Generation System Three Signal Tiers: Short-Term Signals (ST) Trigger: MA8 (EMA 8) crossing MA21 (EMA 21) Filters Applied: ✅ ATR-based post-cross confirmation (optional) ✅ Momentum confirmation (RSI > 50, MACD positive) ✅ Volume spike requirement ✅ HTF (Higher Timeframe) alignment ✅ Strong candle body ratio (>50%) ✅ Multi-MA confirmation (3+ MAs supporting direction) ✅ Price beyond MA21 with conviction ✅ Minimum bar spacing (prevents signal clustering) ✅ Consolidation filter ✅ Whipsaw protection (ATR-based price threshold) Medium-Term Signals (MT) Trigger: MA21 crossing MA50 Less strict filtering for swing trades Major Signals Golden Cross: MA50 crossing above MA200 (major bullish) Death Cross: MA50 crossing below MA200 (major bearish) 🔍 Advanced Filtering System1. ATR-Based ConfirmationPrice must move > (ATR × 0.25) beyond the MA after crossover This prevents false signals during low-volatility consolidation.2. Momentum Filters RSI (14) MACD Histogram Rate of Change (ROC) Composite momentum score (-3 to +3) 3. Volume Analysis Volume spike detection (2x MA) Volume classification: LOW, MED, HIGH, EXPL Directional volume confirmation 4. Higher Timeframe Alignment HTF1: 60-minute (default) HTF2: 4-hour (optional) HTF3: Daily (optional) Signals only trigger when current TF aligns with HTF trend 5. Market Structure Detection Break of Structure (BOS): Price breaking recent swing highs/lows Order Blocks (OB): Institutional demand/supply zones Fair Value Gaps (FVG): Imbalance areas for potential fills 📈 Comprehensive DashboardReal-Time Metrics Display: {scrollbar-width:none;-ms-overflow-style:none;-webkit-overflow-scrolling:touch;} ::-webkit-scrollbar{display:none}MetricDescriptionPriceCurrent close priceTimeframeCurrent chart timeframeSHORT/MEDIUM/MAJORTrend classification (🟢BULL/🔴BEAR/⚪NEUT)HTF TrendsHigher timeframe alignment indicatorsMomentumSTR↑/MOD↑/WK↑/WK↓/MOD↓/STR↓VolatilityLOW/MOD/HIGH/EXTR (based on ATR%)RSI(14)Color-coded: >70 red, <30 greenATR%Volatility as % of priceAdvanced Dashboard Features (Optional): Price Distance from Key MAs vs MA21, MA50, MA200 (percentage) Color-coded: green (above), red (below) MA Alignment Score Calculates % of MAs in proper order 🟢 for bullish alignment, 🔴 for bearish Trend Strength Based on separation between MA21 and MA200 NONE/WEAK/MODERATE/STRONG/EXTREME Consolidation Detection Identifies low-volatility ranges Prevents signals during sideways markets ⚙️ Customization OptionsFilter Toggles: ☑️ Require Momentum ☑️ Require Volume ☑️ Require HTF Alignment ☑️ Use ATR post-cross confirmation ☑️ Whipsaw filter Min bars between signals (default: 5) Dashboard Styling: 9 position options 6 text sizes Custom colors for header, rows, and text Toggle individual metrics on/off 🎨 Visual Elements Signal Labels: ST▲/ST▼ (green/red) - Short-term MT▲/MT▼ (blue/orange) - Medium-term GOLDEN CROSS / DEATH CROSS - Major signals Volume Spikes: Small labels showing volume class + direction Example: "HIGH🟢" or "EXPL🔴" Market Structure: Dashed lines for Break of Structure levels Automatic detection of swing highs/lows 🔔 Alert Conditions Pre-configured alerts for: Short-term bullish/bearish crosses Medium-term bullish/bearish crosses Golden Cross / Death Cross Volume spikes 💡 Key Strengths Institutional-Grade Filtering: Multiple confirmation layers reduce false signals Multi-Timeframe Analysis: Ensures alignment across timeframes Adaptive to Market Conditions: ATR-based thresholds adjust to volatility Comprehensive Dashboard: All critical metrics in one view Highly Customizable: 100+ input parameters Signal Quality Over Quantity: Strict filters prioritize high-probability setups ⚠️ Usage Recommendations Best for: Swing trading and position trading Timeframes: Works on all TFs, optimized for 15m-Daily Markets: Stocks, Forex, Crypto, Indices Signal Frequency: Conservative (quality over quantity) Combine with: Support/resistance, price action, risk management 🔧 Technical Implementation Notes Uses Pine Script v6 syntax Efficient calculation with minimal repainting Maximum 500 labels for performance Security function for HTF data (no lookahead bias) Array-based MA alignment calculation State variables to track signal spacing This is a professional-grade trading system that combines classical technical analysis (moving averages) with modern institutional concepts (market structure, order blocks, multi-timeframe alignment). The extensive filtering system is designed to eliminate noise and focus on high-probability trade setups.
Indicador Pine Script®
por lohanineeraj
FANBLASTERFANBLASTER Methodology & Rules (Live Trading Version) Purpose Catch the exact moment the market flips from chop into a high-conviction trending move using a clean, stacked Fib EMA ribbon + volatility + volume confirmation. Core Idea When the 5-8-13-21-34-55 EMA stack suddenly “fans out” in perfect order with significant separation, a real trend is being born. Most retail traders chase late – FANBLASTER alerts you on the very first bar the fan opens. What Triggers a “FAN BLAST” Alert Perfect EMA Alignment Bullish: 5 > 8 > 13 > 21 > 34 > 55 Bearish: 5 < 8 < 13 < 21 < 34 < 55 (Has to flip from NOT aligned on the previous bar → aligned on this bar) Significant Separation Distance between EMA 5 and EMA 55 ≥ 1.3 × ATR(14) (1.3 is the ES sweet spot – filters fake little wiggles) Trend Strength Confirmation ADX(14) ≥ 22 (Ensures the move isn’t just noise; ES trends explode while ADX is still climbing) Volume Conviction Current volume > 1.4 × 20-period EMA of volume (Real moves have real participation) When ALL FOUR conditions are true on the same bar → you get the green or red circle + phone alert. How to Trade It (Live Rules) Alert fires → look at the chart immediately If price is pulling back to the 8 or 13 EMA in the direction of the fan → enter on touch or close above/below Initial stop: opposite side of the fan (below the 55 for longs, above the 55 for shorts) Target: 2–4 R minimum, trail with the 21 or 34 once in profit No alert = stay flat. This is a “trend birth” sniper, not a scalping tool. Best Instruments & Timeframes (2025) ES & NQ futures 2 min, 5 min, 15 min (all work with the exact same settings) Works on MES/MNQ too (same params) Bottom Line FANBLASTER sits silent 90 % of the day and only screams when the market is actually about to run 20–100+ points. One alert = one high-probability trend. That’s it. Lock it, load it, and let the phone do the hunting. Good luck, stay disciplined, and stack those points. — Your edge is now live.
Indicador Pine Script®
por Nico_Nuvole