RSI & Backed-Weighted MA StrategyRSI & MA Strategy :
INTRODUCTION :
This strategy is based on two well-known indicators that work best together: the Relative Strength Index (RSI) and the Moving Average (MA). We're going to use the RSI as a trend-follower indicator, rather than a reversal indicator as most are used to. To the signals sent by the RSI, we'll add a condition on the chart's MA, filtering out irrelevant signals and considerably increasing our winning rate. This is a medium/long-term strategy. There's also a money management method enabling us to reinvest part of the profits or reduce the size of orders in the event of substantial losses.
RSI :
The RSI is one of the best-known and most widely used indicators in trading. Its purpose is to warn traders when an asset is overbought or oversold. It was designed to send reversal signals, but we're going to use it as a trend indicator by increasing its length to 20. The RSI formula is as follows :
RSI (n) = 100 - (100 / (1 + (H (n)/L (n))))
With n the length of the RSI, H(n) the average of days closing above the open and L(n) the average of days closing below the open.
MA :
The Moving Average is also widely used in technical analysis, to smooth out variations in an asset. The SMA formula is as follows :
SMA (n) = (P1 + P2 + ... + Pn) / n
where n is the length of the MA.
However, an SMA does not weight any of its terms, which means that the price 10 days ago has the same importance as the price 2 days ago or today's price... That's why in this strategy we use a RWMA, i.e. a back-weighted moving average. It weights old prices more heavily than new ones. This will enable us to limit the impact of short-term variations and focus on the trend that was dominating. The RWMA used weights :
The 4 most recent terms by : 100 / (4+(n-4)*1.30)
The other oldest terms by : weight_4_first_term*1.30
So the older terms are weighted 1.30 more than the more recent ones. The moving average thus traces a trend that accentuates past values and limits the noise of short-term variations.
PARAMETERS :
RSI Length : Lenght of RSI. Default is 20.
MA Type : Choice between a SMA or a RWMA which permits to minimize the impact of short term reversal. Default is RWMA.
MA Length : Length of the selected MA. Default is 19.
RSI Long Signal : Minimum value of RSI to send a LONG signal. Default is 60.
RSI Short signal : Maximum value of RSI to send a SHORT signal. Default is 40.
ROC MA Long Signal : Maximum value of Rate of Change MA to send a LONG signal. Default is 0.
ROC MA Short signal : Minimum value of Rate of Change MA to send a SHORT signal. Default is 0.
TP activation in multiple of ATR : Threshold value to trigger trailing stop Take Profit. This threshold is calculated as multiple of the ATR (Average True Range). Default value is 5 meaning that to trigger the trailing TP the price need to move 5*ATR in the right direction.
Trailing TP in percentage : Percentage value of trailing Take Profit. This Trailing TP follows the profit if it increases, remaining selected percentage below it, but stops if the profit decreases. Default is 3%.
Fixed Ratio : This is the amount of gain or loss at which the order quantity is changed. Default is 400, which means that for each $400 gain or loss, the order size is increased or decreased by a user-selected amount.
Increasing Order Amount : This is the amount to be added to or subtracted from orders when the fixed ratio is reached. The default is $200, which means that for every $400 gain, $200 is reinvested in the strategy. On the other hand, for every $400 loss, the order size is reduced by $200.
Initial capital : $1000
Fees : Interactive Broker fees apply to this strategy. They are set at 0.18% of the trade value.
Slippage : 3 ticks or $0.03 per trade. Corresponds to the latency time between the moment the signal is received and the moment the order is executed by the broker.
Important : A bot has been used to test the different parameters and determine which ones maximize return while limiting drawdown. This strategy is the most optimal on BITSTAMP:ETHUSD with a timeframe set to 6h. Parameters are set as follows :
MA type: RWMA
MA Length: 19
RSI Long Signal: >60
RSI Short Signal : <40
ROC MA Long Signal : <0
ROC MA Short Signal : >0
TP Activation in multiple ATR : 5
Trailing TP in percentage : 3
ENTER RULES :
The principle is very simple:
If the asset is overbought after a bear market, we are LONG.
If the asset is oversold after a bull market, we are SHORT.
We have defined a bear market as follows : Rate of Change (20) RWMA < 0
We have defined a bull market as follows : Rate of Change (20) RWMA > 0
The Rate of Change is calculated using this formula : (RWMA/RWMA(20) - 1)*100
Overbought is defined as follows : RSI > 60
Oversold is defined as follows : RSI < 40
LONG CONDITION :
RSI > 60 and (RWMA/RWMA(20) - 1)*100 < -1
SHORT CONDITION :
RSI < 40 and (RWMA/RWMA(20) - 1)*100 > 1
EXIT RULES FOR WINNING TRADE :
We have a trailing TP allowing us to exit once the price has reached the "TP Activation in multiple ATR" parameter, i.e. 5*ATR by default in the profit direction. TP trailing is triggered at this point, not limiting our gains, and securing our profits at 3% below this trigger threshold.
Remember that the True Range is : maximum(H-L, H-C(1), C-L(1))
with C : Close, H : High, L : Low
The Average True Range is therefore the average of these TRs over a length defined by default in the strategy, i.e. 20.
RISK MANAGEMENT :
This strategy may incur losses. The method for limiting losses is to set a Stop Loss equal to 3*ATR. This means that if the price moves against our position and reaches three times the ATR, we exit with a loss.
Sometimes the ATR can result in a SL set below 10% of the trade value, which is not acceptable. In this case, we set the SL at 10%, limiting losses to a maximum of 10%.
MONEY MANAGEMENT :
The fixed ratio method was used to manage our gains and losses. For each gain of an amount equal to the value of the fixed ratio, we increase the order size by a value defined by the user in the "Increasing order amount" parameter. Similarly, each time we lose an amount equal to the value of the fixed ratio, we decrease the order size by the same user-defined value. This strategy increases both performance and drawdown.
Enjoy the strategy and don't forget to take the trade :)
Buscar en scripts para "摩根纳斯达克100基金风险大吗"
MACDVMACDV = Moving Average Convergence Divergence Volume
The MACDV indicator uses stochastic accumulation / distribution volume inflow and outflow formulas to visualize it in a standard MACD type of appearance.
To be able to merge these formulas I had to normalize the math.
Accumulation / distribution volume is a unique scale.
Stochastic is a 0-100 scale.
MACD is a unique scale.
The normalized output scale range for MACDV is -100 to 100.
100 = overbought
-100 = oversold
Everything in between is either bullish or bearish.
Rising = bullish
Falling = bearish
crossover = bullish
crossunder = bearish
convergence = direction change
divergence = momentum
The default input settings are:
7 = K length, Stochastic accumulation / distribution length
3 = D smoothing, smoothing stochastic accumulation / distribution volume weighted moving average
6 = MACDV fast, MACDV fast length line
color = blue
13 = MACDV slow, MACDV slow length line
color = white
4 = MACDV signal, MACDV histogram length
color rising above 0 = bright green
color falling above 0 = dark green
color falling below 0 = bright red
color rising below 0 = dark red
2 = Stretch, Output multiplier for MACDV visual expansion
Horizontal lines:
100
75
50
25
0
-25
-50
-75
-100
Anchored VWAP+This indicator is an enhanced version of the Anchored VWAP indicator with additional functions:
1. Anchored AP (average price). It removes the volume weighting step in Anchored VWAP, and can display the average price over a period of time. For example, if the price of the stock in the last 3 days is 100, 200, 300, then AP is their average value of 200
2. Anchored AC (average cost). The average cost over time can be displayed. For example, if the price of the stock in the last 2 days is 100,300, then AC is (1+1)/(1/100+1/300)=150
When using the indicator, you need to choose a starting point, then the indicator will start to calculate the subsequent VWAP, AP and AC from this starting point, and draw 3 lines in the graph
These three lines can be regarded as the average cost line of the market, with potential support and resistance effects
We have filled the shadow between VWAP and AP, which can be regarded as a potential support resistance band
===========================中文版本===========================
该指标为增强版本的Anchored VWAP指标。在Anchored VWAP基础上增加了额外功能：
1. Anchored AP。其去掉了Anchored VWAP中成交量加权的步骤，可以显示一段时间的平均价格。举个例子，假如股票最近3天的价格为100，200，300，那么AP为他们的平均值200
2. Anchored AC。可以显示一段时间的平均成本。举个例子，假如股票最近2天的价格为100，300，那么AC为(1+1)/(1/100+1/300)=150
使用指标时你需要先选择一个起点，随后指标将会以该起点开始计算后续的VWAP、AP和AC，并且在图中绘制3根线
这3根线均可以视作是市场的平均成本线，具有潜在的支撑和阻力效果
我们让VWAP和AP之间填充了阴影，该阴影可以视作潜在的支撑阻力带
Moving Average Resting Point [theEccentricTrader]█ OVERVIEW
This indicator uses peak and trough prices to calculate the moving average resting point and plots it as a line on the chart. The lookback length is variable and the indicator can plot up to three lines with different lookback lengths and colors.
█ CONCEPTS
Green and Red Candles
• A green candle is one that closes with a high price equal to or above the price it opened.
• A red candle is one that closes with a low price that is lower than the price it opened.
Swing Highs and Swing Lows
• A swing high is a green candle or series of consecutive green candles followed by a single red candle to complete the swing and form the peak.
• A swing low is a red candle or series of consecutive red candles followed by a single green candle to complete the swing and form the trough.
Peak and Trough Prices (Basic)
• The peak price of a complete swing high is the high price of either the red candle that completes the swing high or the high price of the preceding green candle, depending on which is higher.
• The trough price of a complete swing low is the low price of either the green candle that completes the swing low or the low price of the preceding red candle, depending on which is lower.
Historic Peaks and Troughs
The current, or most recent, peak and trough occurrences are referred to as occurrence zero. Previous peak and trough occurrences are referred to as historic and ordered numerically from right to left, with the most recent historic peak and trough occurrences being occurrence one.
Support and Resistance
• Support refers to a price level where the demand for an asset is strong enough to prevent the price from falling further.
• Resistance refers to a price level where the supply of an asset is strong enough to prevent the price from rising further.
Support and resistance levels are important because they can help traders identify where the price of an asset might pause or reverse its direction, offering potential entry and exit points. For example, a trader might look to buy an asset when it approaches a support level , with the expectation that the price will bounce back up. Alternatively, a trader might look to sell an asset when it approaches a resistance level , with the expectation that the price will drop back down.
It's important to note that support and resistance levels are not always relevant, and the price of an asset can also break through these levels and continue moving in the same direction.
Wave Cycles
A wave cycle is here defined as a complete two-part move between a swing high and a swing low, or a swing low and a swing high. As can be seen in the example above, the first swing high or swing low will set the course for the sequence of wave cycles that follow; a chart that begins with a swing low will form its first complete wave cycle upon the formation of the first complete swing high and vice versa.
Wave Length
Wave length is here measured in terms of bar distance between the start and end of a wave cycle. For example, if the current wave cycle ends on a swing low the wave length will be the difference in bars between the current swing low and current swing high. In such a case, if the current swing low completes on candle 100 and the current swing high completed on candle 95, we would simply subtract 95 from 100 to give us a wave length of 5 bars.
Average wave length is here measured in terms of total bars as a proportion as total waves. The average wavelength is calculated by dividing the total candles by the total wave cycles.
Wave Height
Wave height is here measured in terms of current range. For example, if the current peak price is 100 and the current trough price is 80, the wave height will be 20.
Amplitude
Amplitude is here measured in terms of current range divided by two. For example if the current peak price is 100 and the current trough price is 80, the amplitude would be calculated by subtracting 80 from 100 and dividing the answer by 2 to give us an amplitude of 10.
Resting Point
The resting point is here calculated by subtracting the current trough price from the current peak price and adding the difference to the current trough price to output the price in the middle of the two prices. Essentially it is the current trough price plus the amplitude. For example, if the current peak price is 100 and the current trough price is 80, the resting point 90.
The moving average resting point is here calculated by subtracting the moving average trough price from the moving average peak price, dividing the answer by two and adding the difference to the moving average trough price.
Frequency
Frequency is here measured in terms of wave cycles per second (Hertz). For example, if the total wave cycle count is 10 and the amount of time it has taken to complete these 10 cycles is 1-year (31,536,000 seconds), the frequency would be calculated by dividing 10 by 31,536,000 to give us a frequency of 0.00000032 Hz.
Range
The range is simply the difference between the current peak and current trough prices, generally expressed in terms of points or pips.
█ FEATURES
Inputs
Show MARP 1
Show MARP 2
Show MARP 3
MARP 1 Length
MARP 2 Length
MARP 3 Length
MARP 1 Color
MARP 2 Color
MARP 3 Color
█ HOW TO USE
This indicator can be used like any other moving average indicator to analyse trend direction and momentum, identify potential support and resistance levels, or for filtering trading strategies and developing new ones.
Free Volume RSIdear fellows,
this indicator is a mod or tweak on the standard RSI here available.
the original RSI formula is, as you know,
100 - 100/(1+RS)
which equals to
100 * RS/(1+RS)
where
the 100 factor is merely a scale adjustment to 100's percent basis
the RS is the ratio between average gain and average loss within the last N candles.
thus, the absolute gain of the up candles within the last N candles window is averaged; same for absolute loss.
this averaging uses EMA.
the ratio between this averages is RS.
the RS ranges from 0 to infinity, thus the ratio RS/(1+RS) locks it between 0 and 1.
in regard of our changes
we use VWMA instead of EMA
we plot the resulting RS directly, instead of its smooth version RS/(1+RS)
we dismiss the 100 factor.
we specify logarithmic scale for the resulting plot
on the justifications of our changes
by using VWMA instead of EMA we get both a more dynamic averaging (WMA is faster) as well as a de facto strength of the price action, since now volume is considered alongside the price change. this way one can quantify accumulation and distribution intensities.
to anyone who ever was restricted against his will over a sufficiently large period of time on his freedom to move, would understand that an unrestricted indicator conveys better its info.
as we're dealing with ratios, the distance between 1 and 2 is the same between 1 and 0.5; thus, a log scale is specified for reading this indicator without distortions.
on how to use this indicators
this is still an early result, hence it lacks more testing.
so far, when it's oversold, buy; and vice versa.
best regards.
Average Down [Zeiierman]AVERAGING DOWN
Averaging down is an investment strategy that involves buying additional contracts of an asset when the price drops. This way, the investor increases the size of their position at discounted prices. The averaging down strategy is highly debated among traders and investors because it can either lead to huge losses or great returns. Nevertheless, averaging down is often used and favored by long-term investors and contrarian traders. With careful/proper risk management, averaging down can cover losses and magnify the returns when the asset rebounds. However, the main concern for a trader is that it can be hard to identify the difference between a pullback or the start of a new trend.
HOW DOES IT WORK
Averaging down is a method to lower the average price at which the investor buys an asset. A lower average price can help investors come back to break even quicker and, if the price continues to rise, get an even bigger upside and thus increase the total profit from the trade. For example, We buy 100 shares at $60 per share, a total investment of $6000, and then the asset drops to $40 per share; in order to come back to break even, the price has to go up 50%. (($60/$40) - 1)*100 = 50%.
The power of Averaging down comes into play if the investor buys additional shares at a lower price, like another 100 shares at $40 per share; the total investment is ($6000+$4000 = $10000). The average price for the investment is now $50. (($60 x 100) + ($40 x 100))/200; in order to get back to break even, the price has to rise 25% ($50/$40)-1)*100 = 25%, and if the price continues up to $60 per share, the investor can secure a profit at 16%. So by averaging down, investors and traders can cover the losses easier and potentially have more profit to secure at the end.
THE AVERAGE DOWN TRADINGVIEW TOOL
This script/indicator/trading tool helps traders and investors to get the average price of their position. The tool works for Long and Short and displays the entry price, average price, and the PnL in points.
HOW TO USE
Use the tool to calculate the average price of your long or short position in any market and timeframe.
Get the current PnL for the investment and keep track of your entry prices.
APPLY TO CHART
When you apply the tool on the chart, you have to select five entry points, and within the setting panel, you can choose how many of these five entry points are active and how many contracts each entry has. Then, the tool will display your average price based on the entries and the number of contracts used at each price level.
LONG
Set your entries and the number of contracts at each price level. The indicator will then display all your long entries and at what price you will break even. The entry line changes color based on if the entry is in profit or loss.
SHORT
Set your entries and the number of contracts at each price level. The indicator will then display all your short entries and at what price you will break even. The entry line changes color based on if the entry is in profit or loss.
-----------------
Disclaimer
Copyright by Zeiierman.
The information contained in my Scripts/Indicators/Ideas/Algos/Systems does not constitute financial advice or a solicitation to buy or sell any securities of any type. I will not accept liability for any loss or damage, including without limitation any loss of profit, which may arise directly or indirectly from the use of or reliance on such information.
All investments involve risk, and the past performance of a security, industry, sector, market, financial product, trading strategy, backtest, or individual’s trading does not guarantee future results or returns. Investors are fully responsible for any investment decisions they make. Such decisions should be based solely on an evaluation of their financial circumstances, investment objectives, risk tolerance, and liquidity needs.
My Scripts/Indicators/Ideas/Algos/Systems are only for educational purposes!
EMA_cumulativeVolume_crossover [indicator]while I was doing some research with exp MA crossovers and volume indicator , I have noticed that when ema 50 is above cumulative volume of 100 period , shows to capture nice profits in that trend. Shorting also (ema50 cross down volume of 100 period) also shows nice results.
BUY
When ema50 crossover cumulative volume of 100 period
Exit
When ema50 cross down cumulative volume of 100 period
Short Selling
Reverse above BUY conditions
Back ground color shows blue when ema50 is above cumulative volume of 100 period, shows purple when ema50 is below cumulative volume of 100 period
I will publish the strategy for back testing later today
Warning
For the use of educational purpose only
Ruckard TradingLatinoThis strategy tries to mimic TradingLatino strategy.
The current implementation is beta.
Si hablas castellano o espanyol por favor consulta MENSAJE EN CASTELLANO más abajo.
It's aimed at BTCUSDT pair and 4h timeframe.
STRATEGY DEFAULT SETTINGS EXPLANATION
max_bars_back=5000 : This is a random number of bars so that the strategy test lasts for one or two years
calc_on_order_fills=false : To wait for the 4h closing is too much. Try to check if it's worth entering a position after closing one. I finally decided not to recheck if it's worth entering after an order is closed. So it is false.
calc_on_every_tick=false
pyramiding=0 : We only want one entry allowed in the same direction. And we don't want the order to scale by error.
initial_capital=1000 : These are 1000 USDT. By using 1% maximum loss per trade and 7% as a default stop loss by using 1000 USDT at 12000 USDT per BTC price you would entry with around 142 USDT which are converted into: 0.010 BTC . The maximum number of decimal for contracts on this BTCUSDT market is 3 decimals. E.g. the minimum might be: 0.001 BTC . So, this minimal 1000 amount ensures us not to entry with less than 0.001 entries which might have happened when using 100 USDT as an initial capital.
slippage=1 : Binance BTCUSDT mintick is: 0.01. Binance slippage: 0.1 % (Let's assume). TV has an integer slippage. It does not have a percentage based slippage. If we assume a 1000 initial capital, the recommended equity is 142 which at 11996 USDT per BTC price means: 0.011 BTC. The 0.1% slippage of: 0.011 BTC would be: 0.000011 . This is way smaller than the mintick. So our slippage is going to be 1. E.g. 1 (slippage) * 0.01 (mintick)
commission_type=strategy.commission.percent and commission_value=0.1 : According to: binance . com / en / fee / schedule in VIP 0 level both maker and taker fees are: 0.1 %.
BACKGROUND
Jaime Merino is a well known Youtuber focused on crypto trading
His channel TradingLatino
features monday to friday videos where he explains his strategy.
JAIME MERINO STANCE ON BOTS
Jaime Merino stance on bots (taken from memory out of a 2020 June video from him):
'~
You know. They can program you a bot and it might work.
But, there are some special situations that the bot would not be able to handle.
And, I, as a human, I would handle it. And the bot wouldn't do it.
~'
My long term target with this strategy script is add as many
special situations as I can to the script
so that it can match Jaime Merino behaviour even in non normal circumstances.
My alternate target is learn Pine script
and enjoy programming with it.
WARNING
This script might be bigger than other TradingView scripts.
However, please, do not be confused because the current status is beta.
This script has not been tested with real money.
This is NOT an official strategy from Jaime Merino.
This is NOT an official strategy from TradingLatino . net .
HOW IT WORKS
It basically uses ADX slope and LazyBear's Squeeze Momentum Indicator
to make its buy and sell decisions.
Fast paced EMA being bigger than slow paced EMA
(on higher timeframe) advices going long.
Fast paced EMA being smaller than slow paced EMA
(on higher timeframe) advices going short.
It finally add many substrats that TradingLatino uses.
SETTINGS
__ SETTINGS - Basics
____ SETTINGS - Basics - ADX
(ADX) Smoothing {14}
(ADX) DI Length {14}
(ADX) key level {23}
____ SETTINGS - Basics - LazyBear Squeeze Momentum
(SQZMOM) BB Length {20}
(SQZMOM) BB MultFactor {2.0}
(SQZMOM) KC Length {20}
(SQZMOM) KC MultFactor {1.5}
(SQZMOM) Use TrueRange (KC) {True}
____ SETTINGS - Basics - EMAs
(EMAS) EMA10 - Length {10}
(EMAS) EMA10 - Source {close}
(EMAS) EMA55 - Length {55}
(EMAS) EMA55 - Source {close}
____ SETTINGS - Volume Profile
Lowest and highest VPoC from last three days
is used to know if an entry has a support
VPVR of last 100 4h bars
is also taken into account
(VP) Use number of bars (not VP timeframe): Uses 'Number of bars {100}' setting instead of 'Volume Profile timeframe' setting for calculating session VPoC
(VP) Show tick difference from current price {False}: BETA . Might be useful for actions some day.
(VP) Number of bars {100}: If 'Use number of bars (not VP timeframe)' is turned on this setting is used to calculate session VPoC.
(VP) Volume Profile timeframe {1 day}: If 'Use number of bars (not VP timeframe)' is turned off this setting is used to calculate session VPoC.
(VP) Row width multiplier {0.6}: Adjust how the extra Volume Profile bars are shown in the chart.
(VP) Resistances prices number of decimal digits : Round Volume Profile bars label numbers so that they don't have so many decimals.
(VP) Number of bars for bottom VPOC {18}: 18 bars equals 3 days in suggested timeframe of 4 hours. It's used to calculate lowest session VPoC from previous three days. It's also used as a top VPOC for sells.
(VP) Ignore VPOC bottom advice on long {False}: If turned on it ignores bottom VPOC (or top VPOC on sells) when evaluating if a buy entry is worth it.
(VP) Number of bars for VPVR VPOC {100}: Number of bars to calculate the VPVR VPoC. We use 100 as Jaime once used. When the price bounces back to the EMA55 it might just bounce to this VPVR VPoC if its price it's lower than the EMA55 (Sells have inverse algorithm).
____ SETTINGS - ADX Slope
ADX Slope
help us to understand if ADX
has a positive slope, negative slope
or it is rather still.
(ADXSLOPE) ADX cut {23}: If ADX value is greater than this cut (23) then ADX has strength
(ADXSLOPE) ADX minimum steepness entry {45}: ADX slope needs to be 45 degrees to be considered as a positive one.
(ADXSLOPE) ADX minimum steepness exit {45}: ADX slope needs to be -45 degrees to be considered as a negative one.
(ADXSLOPE) ADX steepness periods {3}: In order to avoid false detection the slope is calculated along 3 periods.
____ SETTINGS - Next to EMA55
(NEXTEMA55) EMA10 to EMA55 bounce back percentage {80}: EMA10 might bounce back to EMA55 or maybe to 80% of its complete way to EMA55
(NEXTEMA55) Next to EMA55 percentage {15}: How much next to the EMA55 you need to be to consider it's going to bounce back upwards again.
____ SETTINGS - Stop Loss and Take Profit
You can set a default stop loss or a default take profit.
(STOPTAKE) Stop Loss % {7.0}
(STOPTAKE) Take Profit % {2.0}
____ SETTINGS - Trailing Take Profit
You can customize the default trailing take profit values
(TRAILING) Trailing Take Profit (%) {1.0}: Trailing take profit offset in percentage
(TRAILING) Trailing Take Profit Trigger (%) {2.0}: When 2.0% of benefit is reached then activate the trailing take profit.
____ SETTINGS - MAIN TURN ON/OFF OPTIONS
(EMAS) Ignore advice based on emas {false}.
(EMAS) Ignore advice based on emas (On closing long signal) {False}: Ignore advice based on emas but only when deciding to close a buy entry.
(SQZMOM) Ignore advice based on SQZMOM {false}: Ignores advice based on SQZMOM indicator.
(ADXSLOPE) Ignore advice based on ADX positive slope {false}
(ADXSLOPE) Ignore advice based on ADX cut (23) {true}
(STOPTAKE) Take Profit? {false}: Enables simple Take Profit.
(STOPTAKE) Stop Loss? {True}: Enables simple Stop Loss.
(TRAILING) Enable Trailing Take Profit (%) {True}: Enables Trailing Take Profit.
____ SETTINGS - Strategy mode
(STRAT) Type Strategy: 'Long and Short', 'Long Only' or 'Short Only'. Default: 'Long and Short'.
____ SETTINGS - Risk Management
(RISKM) Risk Management Type: 'Safe', 'Somewhat safe compound' or 'Unsafe compound'. ' Safe ': Calculations are always done with the initial capital (1000) in mind. The maximum losses per trade/day/week/month are taken into account. ' Somewhat safe compound ': Calculations are done with initial capital (1000) or a higher capital if it increases. The maximum losses per trade/day/week/month are taken into account. ' Unsafe compound ': In each order all the current capital is gambled and only the default stop loss per order is taken into account. That means that the maximum losses per trade/day/week/month are not taken into account. Default : 'Somewhat safe compound'.
(RISKM) Maximum loss per trade % {1.0}.
(RISKM) Maximum loss per day % {6.0}.
(RISKM) Maximum loss per week % {8.0}.
(RISKM) Maximum loss per month % {10.0}.
____ SETTINGS - Decimals
(DECIMAL) Maximum number of decimal for contracts {3}: How small (3 decimals means 0.001) an entry position might be in your exchange.
EXTRA 1 - PRICE IS IN RANGE indicator
(PRANGE) Print price is in range {False}: Enable a bottom label that indicates if the price is in range or not.
(PRANGE) Price range periods {5}: How many previous periods are used to calculate the medians
(PRANGE) Price range maximum desviation (%) {0.6} ( > 0 ): Maximum positive desviation for range detection
(PRANGE) Price range minimum desviation (%) {0.6} ( > 0 ): Mininum negative desviation for range detection
EXTRA 2 - SQUEEZE MOMENTUM Desviation indicator
(SQZDIVER) Show degrees {False}: Show degrees of each Squeeze Momentum Divergence lines to the x-axis.
(SQZDIVER) Show desviation labels {False}: Whether to show or not desviation labels for the Squeeze Momentum Divergences.
(SQZDIVER) Show desviation lines {False}: Whether to show or not desviation lines for the Squeeze Momentum Divergences.
EXTRA 3 - VOLUME PROFILE indicator
WARNING: This indicator works not on current bar but on previous bar. So in the worst case it might be VP from 4 hours ago. Don't worry, inside the strategy calculus the correct values are used. It's just that I cannot show the most recent one in the chart.
(VP) Print recent profile {False}: Show Volume Profile indicator
(VP) Avoid label price overlaps {False}: Avoid label prices to overlap on the chart.
EXTRA 4 - ZIGNALY SUPPORT
(ZIG) Zignaly Alert Type {Email}: 'Email', 'Webhook'. ' Email ': Prepare alert_message variable content to be compatible with zignaly expected email content format. ' Webhook ': Prepare alert_message variable content to be compatible with zignaly expected json content format.
EXTRA 5 - DEBUG
(DEBUG) Enable debug on order comments {False}: If set to true it prepares the order message to match the alert_message variable. It makes easier to debug what would have been sent by email or webhook on each of the times an order is triggered.
HOW TO USE THIS STRATEGY
BOT MODE: This is the default setting.
PROPER VOLUME PROFILE VIEWING: Click on this strategy settings. Properties tab. Make sure Recalculate 'each time the order was run' is turned off.
NEWBIE USER: (Check PROPER VOLUME PROFILE VIEWING above!) You might want to turn on the 'Print recent profile {False}' setting. Alternatively you can use my alternate realtime study: 'Resistances and supports based on simplified Volume Profile' but, be aware, it might consume one indicator.
ADVANCED USER 1: Turn on the 'Print price is in range {False}' setting and help us to debug this subindicator. Also help us to figure out how to include this value in the strategy.
ADVANCED USER 2: Turn on the all the (SQZDIVER) settings and help us to figure out how to include this value in the strategy.
ADVANCED USER 3: (Check PROPER VOLUME PROFILE VIEWING above!) Turn on the 'Print recent profile {False}' setting and report any problem with it.
JAIME MERINO: Just use the indicator as it comes by default. It should only show BUY signals, SELL signals and their associated closing signals. From time to time you might want to check 'ADVANCED USER 2' instructions to check that there's actually a divergence. Check also 'ADVANCED USER 1' instructions for your amusement.
EXTRA ADVICE
It's advised that you use this strategy in addition to these two other indicators:
* Squeeze Momentum Indicator
* ADX
so that your chart matches as close as possible to TradingLatino chart.
ZIGNALY INTEGRATION
This strategy supports Zignaly email integration by default. It also supports Zignaly Webhook integration.
ZIGNALY INTEGRATION - Email integration example
What you would write in your alert message:
||{{strategy.order.alert_message}}||key=MYSECRETKEY||
ZIGNALY INTEGRATION - Webhook integration example
What you would write in your alert message:
{ {{strategy.order.alert_message}} , "key" : "MYSECRETKEY" }
CREDITS
I have reused and adapted some code from
'Directional Movement Index + ADX & Keylevel Support' study
which it's from TradingView console user.
I have reused and adapted some code from
'3ema' study
which it's from TradingView hunganhnguyen1193 user.
I have reused and adapted some code from
'Squeeze Momentum Indicator ' study
which it's from TradingView LazyBear user.
I have reused and adapted some code from
'Strategy Tester EMA-SMA-RSI-MACD' study
which it's from TradingView fikira user.
I have reused and adapted some code from
'Support Resistance MTF' study
which it's from TradingView LonesomeTheBlue user.
I have reused and adapted some code from
'TF Segmented Linear Regression' study
which it's from TradingView alexgrover user.
I have reused and adapted some code from
"Poor man's volume profile" study
which it's from TradingView IldarAkhmetgaleev user.
FEEDBACK
Please check the strategy source code for more detailed information
where, among others, I explain all of the substrats
and if they are implemented or not.
Q1. Did I understand wrong any of the Jaime substrats (which I have implemented)?
Q2. The strategy yields quite profit when we should long (EMA10 from 1d timeframe is higher than EMA55 from 1d timeframe.
Why the strategy yields much less profit when we should short (EMA10 from 1d timeframe is lower than EMA55 from 1d timeframe)?
Any idea if you need to do something else rather than just reverse what Jaime does when longing?
FREQUENTLY ASKED QUESTIONS
FAQ1. Why are you giving this strategy for free?
TradingLatino and his fellow enthusiasts taught me this strategy. Now I'm giving back to them.
FAQ2. Seriously! Why are you giving this strategy for free?
I'm confident his strategy might be improved a lot. By keeping it to myself I would avoid other people contributions to improve it.
Now that everyone can contribute this is a win-win.
FAQ3. How can I connect this strategy to my Exchange account?
It seems that you can attach alerts to strategies.
You might want to combine it with a paying account which enable Webhook URLs to work.
I don't know how all of this works right now so I cannot give you advice on it.
You will have to do your own research on this subject. But, be careful. Automating trades, if not done properly,
might end on you automating losses.
FAQ4. I have just found that this strategy by default gives more than 3.97% of 'maximum series of losses'. That's unacceptable according to my risk management policy.
You might want to reduce default stop loss setting from 7% to something like 5% till you are ok with the 'maximum series of losses'.
FAQ5. Where can I learn more about your work on this strategy?
Check the source code. You might find unused strategies. Either because there's not a substantial increases on earnings. Or maybe because they have not been implemented yet.
FAQ6. How much leverage is applied in this strategy?
No leverage.
FAQ7. Any difference with original Jaime Merino strategy?
Most of the times Jaime defines an stop loss at the price entry. That's not the case here. The default stop loss is 7% (but, don't be confused it only means losing 1% of your investment thanks to risk management). There's also a trailing take profit that triggers at 2% profit with a 1% trailing.
FAQ8. Why this strategy return is so small?
The strategy should be improved a lot. And, well, backtesting in this platform is not guaranteed to return theoric results comparable to real-life returns. That's why I'm personally forward testing this strategy to verify it.
MENSAJE EN CASTELLANO
En primer lugar se agradece feedback para mejorar la estrategia.
Si eres un usuario avanzado y quieres colaborar en mejorar el script no dudes en comentar abajo.
Ten en cuenta que aunque toda esta descripción tenga que estar en inglés no es obligatorio que el comentario esté en inglés.
CHISTE - CASTELLANO
¡Pero Jaime!
¡400.000!
¡Tu da mun!
Complex Oscillator [-W-]Eng.
Tradingview in the free version has a limitation - you can only use three indicators on the chart.
Complex Oscillator indicator combines several indicators in one, it is:
- RSI
- Stochastic
- WPR (%R)
- Volumes
The first three are chosen because their values are in the range |0-100| and one scale can be used for them.
The volumes are added because I personally feel sorry to allocate one of the three available places for them. =)
It is much more convenient to use them together with some other indicator.
Volumes also in the range 0-100, that is, they will not show the real numerical value, but only the value relative to the previous volumes.
You can display all the indicators at once or only a few of them.
The chart above shows the same indicator in three different variations.
If you know any other standard indicators with values in the range |0-100|, write in the comments, I will add to this indicator.
Rus.
Tradingview в бесплатной версии имеет ограничение - вы можете использовать только три индикатора на графике.
Индикатор Complex Oscillator объединяет несколько индикаторов в одном, это:
- RSI
- Stochastic
- WPR (%R)
- Volumes
Первые три выбраны из-за того, что их значения лежат в диапазоне |0-100| и для них можно использовать одну шкалу.
Объёмы добавлены, потому что лично мне жалко выделять для них одно из трёх доступных мест. =)
Намного удобнее использовать их вместе с каким-нибудь другим индикатором.
Объёмы относительные, тоже лежат в диапазоне 0-100, то есть реальное численное значение они не покажут, а только величину относительно предыдущих объёмов.
Вы можете вывести показания сразу всех индикаторов или только нескольких из них.
На графике выше представлен один и тот же индикатор в трёх разных вариациях.
Если вы знаете ещё какие-нибудь стандартные индикаторы со значениями в интервале |0-100|, напишите в комментариях, я добавлю в этот индикатор.
Commercial Movement Index-BuschiEnglish
Inspired by the book "The Commitments of Traders Bible" by Stephen Briese, this indicator is a follow-up of my already published "Commercial Index-Buschi".
Here, the Commercial Index isn't shown in values from 0 to 100, but in how far the value changed from a given timeframe (default Movement Reference: 6 weeks). Therefore it ranges from 100 (bullish move from the Commercials during the last weeks) to -100 (bearish move).
Deutsch
Inspiriert durch das Buch "The Commitments of Traders Bible" by Stephen Briese, ist dieser Indikator eine Weiterentwicklung meines bereits veröffentlichten Skriptes "Commercial Index-Buschi".
Hier wird der Commercial Index nicht in Werten von 0 bis 100 angezeigt, sondern in wieweit er sich innerhalb eines vorgegebenen Zeitfensters (Standard: Movement Reference: 6 Wochen) verändert hat. Daher schwankt er zwischen 100 (bullishe Bewegung der Commercials innerhalb der letzten Wochen) und -100 (bearishe Bewegung).
ADL-NDX Rank Difference-Buschi
English:
An expansion of the Advance Decline Line of the NASDAQ. It can be interesting to compare the Advance Decline Line with the corresponding benchmark index. I therefore made a ranking (0 to 100) based on the performance over the last days (default: 21 days). The difference is the target figure and ranges between -100 (bearish divergence) to +100 (bullish divergence).
Deutsch:
Eine Erweiterung der Advance Decline Line der NASDAQ. Oft möchte man den Verlauf der Advance Decline Line mit dem zugehörigen Leitindex vergleichen. Daher habe ich für beide ein Ranking (0 bis 100) erstellt auf Basis des Verlaufs über die letzten Tage (Standardwert: 21 Tage). Die Differenz stellt dabei die Zielgröße dar und schwankt zwischen -100 (bärische Divergenz) und +100 (bullische Divergenz).
ADL-SPX Rank Difference-Buschi
English:
An expansion of the Advance Decline Line of the NYSE. It can be interesting to compare the Advance Decline Line with the corresponding benchmark index. I therefore made a ranking (0 to 100) based on the performance over the last days (default: 21 days). The difference is the target figure and ranges between -100 (bearish divergence) to +100 (bullish divergence).
Deutsch:
Eine Erweiterung der Advance Decline Line der NYSE. Oft möchte man den Verlauf der Advance Decline Line mit dem zugehörigen Leitindex vergleichen. Daher habe ich für beide ein Ranking (0 bis 100) erstellt auf Basis des Verlaufs über die letzten Tage (Standardwert: 21 Tage). Die Differenz stellt dabei die Zielgröße dar und schwankt zwischen -100 (bärische Divergenz) und +100 (bullische Divergenz).
APEX - Aroon / Aroon Oscillator [v1]Simple Script that combines Aroon and Aroon Oscillator with MTF functionality for APEX.
Aroon
The Aroon also know as Aroon Up/Down will help you determine the trend of the asset of if the asset is ranging. The indicator consists of two lines the AroonDown and the Aroon Up.When Aroon Up reaches 100, a new uptrend may have begun. If it remains persistently between 70 and 100, and the Aroon-Down remains between 0 and 30, then a new uptrend is underway.If the Aroon-Up crosses above the Aroon-Down, then a new uptrend may start soon. Conversely, if Aroon-Down crosses above the Aroon-Up, then a new downtrend may start soon. When Aroon-Up reaches 100, a new uptrend may have begun. If it remains persistently between 70 and 100, and the Aroon-Down remains between 0 and 30, then a new uptrend is underway.
Aroon Oscillator
The Aroon Oscillator is the difference between Aroon-Up and Aroon-Down. These two indicators are usually plotted together for easy comparison, but chartists can also view the difference between these two indicators with the Aroon Oscillator. This indicator fluctuates between -100 and +100 with zero as the middle line. An upward trend bias is present when the oscillator is positive, while a downward trend bias exists when the oscillator is negative.
Triple Standard Deviation＝＝日本語説明も併記 // Japanese discription is following ＝＝
■ Momentum Indicator (Triple Indication of Standard Deviation Volatilities)
■ Effective assets: All
■Example of utilization
1) Assume that a trend is generated at the timing when the yellow area chart (26) rises
2) Confirm the candlestick and if the price jumps out of the Bollinger band ± 1 σ, the trend toward that direction
3) If the closing price is confirmed within ± 1σ of the Bollinger band, close the position
■ Detailed explanation
Three standard deviation volatilities with different parameters are displayed at the same time. As represented by convergence divergence of Bollinger, it has a characteristic that it rises in the trend generation period and falls during the trend convergence period.
It develops color in a rising phase so that trend generation is easy to recognize, and fades in a falling phase.
Daily use is basic, but you can use it with the same parameters for other time feet.
The basic parameter (26) is displayed in yellow area for the most visibility.
The long-term parameter (52) is indicated by a yellow dot as an auxiliary element for judging the rising margin of the basic line.
The short-term parameter (13) is displayed as a line as an auxiliary element for recognizing the peak out of the basic line in advance.
In some cases, by changing short term (13) to super long term (100) you can recognize the major market price level once in several years.
Three periods The phrase "all lines" goes from "low position" to "rising together" is considered the strongest trend.
On the other hand, in the case where the short-term line rises backwards as the longer-term line goes down, it tends to end up with short-lived trends and failure to form trends.
If the trend speed is constant as a standard feature of calculating the standard deviation, the standard deviation may decrease even during trend continuation. Therefore, it is desirable to make a comprehensive judgment by comparing the shape of candlestick with the longer-term line.
Please note that there is no way to judge whether the trend suggested by this index rises or falls from this index, so it is necessary to confirm the main chart. (It is preferable to display parabolic or Bollinger band)
■ Remarks
It is an index created assuming that it is used as Triple STD-ADX in combination with Triple Smoothed ADX（to be posted later）.
■ About Triple STD-ADX
Triple Standard Deviation "and" Triple Smoothed ADX "are superimposed and displayed as" Screen (without scale) "to function as" Triple STD - ADX ".
The method of utilization is the same as Triple Standard Deviation and Triple Smoothed ADX, but by simultaneously displaying two momentum indicators with different calculation approaches with multiple parameters, we aim to mutually complement the cognitive power of trends.
STD (13, 26, 52, 100, 200) and ADX (7, 14, 26, 52, 100) correspond to reaction rates respectively.
By choosing different reaction rates you can expect to further increase reliability.
You can estimate the reliability of the trend most reliably in a situation where all six signals in total rise from low to high.
■Sample: STD-ADX Trade Signal
========================================================
■ モメンタム指標（標準偏差ボラティリティの3連表示）
■ 有効アセット：すべて
■ 活用の一例
１）黄色のエリアチャート（26）が上昇したタイミングでトレンド発生を想定
２）ローソク足を確認し、ボリンジャーバンド±1σの外に価格が飛び出している場合はその方向へのトレンドと認識
３）ボリンジャーバンド±1σ以内で終値が確定した場合にはポジションクローズ
■ 詳細説明
パラメーターの異なる３つの標準偏差ボラティリティを同時に表示します。ボリンジャーの収束発散に代表されるように、トレンド発生期に上昇しトレンド収束期に低下する特性を持ちます。
トレンド発生を認識しやすいように上昇局面で発色し、下降局面で退色します。
活用は日足が基本ですが、他の時間足に対しても同一パラメーターで使用することができます。
基本パラメーター（26）は最も視認しやすいように黄色のエリア表示にしています。
長期パラメーター（52）は基本線の上昇余力を判断するための補助要素として黄色の丸点で表示しています。
短期パラメーター（13）は基本線のピークアウトを先行して認識するための補助要素としてラインで表示にしています。
場合によって、短期(13)を超長期（100）に変更することで数年に一度のレベルの大相場が認識できます。
3期間「全てのライン」が「低い位置」から「揃って上昇」する局面を最も強いトレンドと考えます。
一方、より長期のラインが低下する中、より短期のラインが逆行して上昇するケースでは、短命のトレンドやトレンド形成失敗に終わることが多くなります。
標準偏差の計算上の特徴としてトレンドの速度が一定の場合にトレンド継続中も標準偏差が低下することがあります。そのため、ローソク足の形状とより長期のラインを見比べて総合的に判断することが望ましいです。
なお、本指標が示唆するトレンドが上昇か下降かは本指標からは判断する術はないため、必ずメインチャートを確認する必要があります。（パラボリックやボリンジャーバンドを表示すると好適）
■備考
追って掲載するTriple Smoothed ADXと併用して、Triple STD-ADXとして使用することを想定して作成した指標です。
■Triple STD-ADXについて
「Triple Standard Deviation」と「Triple Smoothed ADX」を一方を「スクリーン（スケールなし）」として重ねて表示させることで「Triple STD-ADX」として機能します。
活用方法はTriple Standard DeviationやTriple Smoothed ADXと同じですが、算出アプローチの異なる２つのモメンタム指標を複数パラメーターで同時に表示させることで、トレンドの認識力を相互に補完する狙いがあります。
反応速度はそれぞれSTD（13,26,52,100,200)とADX（7,14,26,52,100)がほぼ対応します。
異なる反応速度を選択することで信頼度をさらに高めることを期待できます。
合計6本のシグナル全てが低い位置から揃って上昇する局面でトレンドの信頼性を最も高く見積もることができます。
CCI Multi-TimeframeThe Commodity Channel Index (CCI) is a leading oscillating momentum indicator that was developed by Donald Lambert to identify cyclical turns in commodities but can also be used on securities and bonds as well.
HOW IS IT USED ?
Lambert used the CCI to generate entry and exit signals when the CCI moved above +100% and below -100% respectively. When the CCI moves above +100%, the security enters into a strong uptrend and an entry signal is given. When the CCI moves back below +100% this position should be closed. Conversely, when the CCI moves below -100%, the security enters into a strong downtrend and an exit signal is given. When the CCI moves back above -100% this position should be closed.
In addition, an entry signal is given when the CCI bounces off of the zero line. When the CCI reaches the zero line, the security's average price is at the moving average used to calculate the CCI and when a security bounces off its moving average it is considered a good entry position as the security has pulled back to its short-term support with the bounce reaffirming the current trend.
The CCI can also be used to identify overbought and oversold levels. A security could be considered oversold when the CCI moves below -100 and overbought when it moves above +100. From an oversold level, an entry signal may be given when the CCI moves above -100. From an overbought level, an exit signal might be given when the CCI moves below +100.
Divergences can also be applied to the CCI. A positive divergence below -100 would increase the probability of a signal based on a move above -100, and a negative divergence above +100 would increase the probability of a signal based on a move back below +100.
Trend line breaks can be used to generate entry and exit signals. Trend lines can be drawn connecting the peaks and troughs. From oversold levels, a move above -100 and a trend line breakout could be used as an entry signal. Conversely, from overbought levels, a move below +100 and a trend line breakout could be used as an exit signal.
I added the possibility to add on the chart a 2nd timeframe for confirmation.
If you found this script useful, a tip is always welcome... :)
Multiplier ChartI am proposing an alternative to the percent change.
An alternative that is symmetrical to both positive and negative change, unlike percentage change.
The simple idea is to have a positive number if the reference value (called val in the script) is lower than the stock value and needs to be multiplied;
a negative number instead if the reference number is higher than the stock value, so the reference value needs to be divided.
Multiplying all by 100 to give clearer and more readable results, the Multiplier would have a huge gap between +100 and -100, because a stock multiplied by 1 or divided by 1 are the same thing.
So we need to compromise and move all positive numbers down by 100 and all negative numbers up by 100. This actually gives a similar result to percentage change, and it is actually identical in the positive range.
The fundamental difference lies on the negative range, which is completely symmetrical. So if a stock goes up 100 points one day (doubles), and the next it goes down another 100 points (halves), at the end of the second day the stock has the same value as it had at the beginning of the first day! On percentage change it would be +100% the first day and -50% the second.
We mustn't undervalue the human tendency to compare a 1% change to a -1% change, but they do not mean the same even if they seem to indicate so.
A clear example of this can be found on CMC 0.60% -3.56% -3.56% (CoinMarketCap), in which each day are shown the best and worst performing coins of the day. So you might see a +900% there in the top performing, but you'll never see a -900%, because percentage change cannot go further than -100%. It is a fundamentally asymmetric scale that can confuse people a lot especially in those fast moving new markets.ù
I am welcome to feedback and all kinds of opinions and critics.
Some interesting things to note: you can use it as a percentage change indicator or as a different perspective to a stock chart. In fact, it lets you see how big of a difference it made buying coins when they were very cheap, because when they are cheap a difference of what it might seem nothing is amplified by all the gains that the stock/coin made after. So, looking at coins charts using this indicator shows how "not flat" were the early days, which in a normal chart are flattened to 0.
HSM KILLZONE//@version=5
indicator('HSM KILLZONE', 'HSM KILLZONE', overlay=true, max_bars_back=500, explicit_plot_zorder=true)
import boitoki/AwesomeColor/4 as ac
import boitoki/Utilities/3 as util
///////////////
// Groups
///////////////
g0 = 'GENERAL'
g1_01 = '♯1 SESSION'
g1_02 = '♯2 SESSION'
g1_03 = '♯3 SESSION'
g1_04 = '♯4 SESSION'
g4 = 'BOX'
g6 = 'LABELS'
g5 = 'OPENING RANGE'
g7 = 'FIBONACCI LEVELS'
g8 = 'OPTIONS'
g11 = 'CANDLE'
g10 = 'Alerts visualized'
///////////////
// Defined
///////////////
max_bars = 500
option_yes = 'Yes'
option_no = '× No'
option_extend1 = 'Yes'
option_hide = '× Hide'
option_border_style1 = '────'
option_border_style2 = '- - - - - -'
option_border_style3 = '•••••••••'
option_chart_x = '× No'
option_chart_1 = 'Bar color'
option_chart_2 = 'Candles'
fmt_price = '{0,number,#.#####}'
fmt_pips = '{0,number,#.#}'
icon_separator = ' • '
color_none = color.new(color.black, 100)
color_text = color.new(color.white, 0)
///////////////
// Functions
///////////////
f_get_time_by_bar(bar_count) => timeframe.multiplier * bar_count * 60 * 1000
f_border_style (_style) =>
switch _style
option_border_style1 => line.style_solid
option_border_style2 => line.style_dashed
option_border_style3 => line.style_dotted
=> _style
f_get_period (_session, _start, _lookback) =>
result = math.max(_start, 1)
for i = result to _lookback
if na(_session ) and _session
result := i+1
break
result
f_get_label_position (_y, _side) =>
switch _y
'top' => _side == 'outside' ? label.style_label_lower_left : label.style_label_upper_left
'bottom' => _side == 'outside' ? label.style_label_upper_left : label.style_label_lower_left
f_get_started (_session) => na(_session ) and _session
f_get_ended (_session) => na(_session) and _session
f_message_limit_bars (_v) => '⚠️ This box\'s right position exceeds 500 bars(' + str.tostring(_v) + '). This box is not displayed correctly.'
f_set_line_x1 (_line, _x) =>
if (line.get_x1(_line) != _x)
line.set_x1(_line, _x)
f_set_line_x2 (_line, _x) =>
if (line.get_x2(_line) != _x)
line.set_x2(_line, _x)
f_set_box_right (_box, _x) =>
if box.get_right(_box) != _x
box.set_right(_box, _x)
///////////////
// Inputs
///////////////
// Timezone
i_tz = input.string('GMT-4', title='Timezone', options= , tooltip='e.g. \'America/New_York\', \'Asia/Tokyo\', \'GMT-4\', \'GMT+9\'...', group=g0)
i_history_period = input.int(10, 'History', minval=0, group=g0)
i_show = i_history_period > 0
i_lookback = 12 * 60
// Sessions
i_show_sess1 = input.bool(true, 'Session 1 ', group=g1_01, inline='session1_1') and i_show
i_sess1_label = input.string('New York AM', '', group=g1_01, inline='session1_1')
i_sess1_color = input.color(#0a0a0a, '', group=g1_01, inline='session1_1')
i_sess1_barcolor1 = input.color(#0a0a0a, '•', group=g1_01, inline='session1_1')
i_sess1_barcolor2 = input.color(#0a0a0a, '', group=g1_01, inline='session1_1')
i_sess1 = input.session('0700-1100', 'Time', group=g1_01)
i_sess1_extend = input.string(option_no, 'Extend', options= , group=g1_01)
i_sess1_fib = input.string(option_no, 'Fibonacci levels', group=g1_01, options= ) != option_no
i_sess1_op = input.string(option_no, 'Opening range', group=g1_01, options= ) != option_no and i_show
i_sess1_chart = input.string(option_chart_x, 'Bar', options= , group=g1_01)
i_sess1_barcolor = i_sess1_chart == option_chart_1
i_sess1_plotcandle = i_sess1_chart == option_chart_2
i_show_sess2 = input.bool(true, 'Session 2 ', group=g1_02, inline='session2_1') and i_show
i_sess2_label = input.string('New York PM', '', group=g1_02, inline='session2_1')
i_sess2_color = input.color(#0a0a0a, '', group=g1_02, inline='session2_1')
i_sess2_barcolor1 = input.color(#0a0a0a, '•', group=g1_02, inline='session2_1')
i_sess2_barcolor2 = input.color(#0a0a0a, '', group=g1_02, inline='session2_1')
i_sess2 = input.session('1300-1600', 'Time', group=g1_02)
i_sess2_extend = input.string(option_no, 'Extend', options= , group=g1_02)
i_sess2_fib = input.string(option_no, 'Fibonacci levels', group=g1_02, options= ) != option_no
i_sess2_op = input.string(option_no, 'Opening range', group=g1_02, options= ) != option_no and i_show
i_sess2_chart = input.string(option_chart_x, 'Bar', options= , group=g1_02)
i_sess2_barcolor = i_sess2_chart == option_chart_1
i_sess2_plotcandle = i_sess2_chart == option_chart_2
i_show_sess3 = input.bool(true, 'Session 3 ', group=g1_03, inline='session3_1') and i_show
i_sess3_label = input.string('Asian Sesh', '', group=g1_03, inline='session3_1')
i_sess3_color = input.color(#0a0a0a, '', group=g1_03, inline='session3_1')
i_sess3_barcolor1 = input.color(#0a0a0a, '•', group=g1_03, inline='session3_1')
i_sess3_barcolor2 = input.color(#0a0a0a, '', group=g1_03, inline='session3_1')
i_sess3 = input.session('2000-0000', 'Time', group=g1_03)
i_sess3_extend = input.string(option_no, 'Extend', options= , group=g1_03)
i_sess3_fib = input.string(option_no, 'Fibonacci levels', group=g1_03, options= ) != option_no
i_sess3_op = input.string(option_no, 'Opening range', group=g1_03, options= ) != option_no and i_show
i_sess3_chart = input.string(option_chart_x, 'Bar', options= , group=g1_03)
i_sess3_barcolor = i_sess3_chart == option_chart_1
i_sess3_plotcandle = i_sess3_chart == option_chart_2
i_show_sess4 = input.bool(true, 'Session 4 ', group=g1_04, inline='session4_1') and i_show
i_sess4_label = input.string('London', '', group=g1_04, inline='session4_1')
i_sess4_color = input.color(#0a0a0a, '', group=g1_04, inline='session4_1')
i_sess4_barcolor1 = input.color(#0a0a0a, '•', group=g1_04, inline='session4_1')
i_sess4_barcolor2 = input.color(#0a0a0a, '', group=g1_04, inline='session4_1')
i_sess4 = input.session('0200-0500', 'Time', group=g1_04)
i_sess4_extend = input.string(option_no, 'Extend', options= , group=g1_04)
i_sess4_fib = input.string(option_no, 'Fibonacci levels', group=g1_04, options= ) != option_no
i_sess4_op = input.string(option_no, 'Opening range', group=g1_04, options= ) != option_no and i_show
i_sess4_chart = input.string(option_chart_x, 'Bar', options= , group=g1_04)
i_sess4_barcolor = i_sess4_chart == option_chart_1
i_sess4_plotcandle = i_sess4_chart == option_chart_2
// Show & Styles
i_sess_box_style = input.string('Box', 'Style', options= , group=g4)
i_sess_border_style = f_border_style(input.string(option_border_style2, 'Line style', options= , group=g4))
i_sess_border_width = input.int(1, 'Thickness', minval=0, group=g4)
i_sess_bgopacity = input.int(94, 'Transp', minval=0, maxval=100, step=1, group=g4, tooltip='Setting the 100 is no background color')
// Candle
option_candle_body = 'OC'
option_candle_wick = 'OHLC'
i_candle = input.string(option_hide, 'Display', options= , group=g11)
i_candle_border_width = input.int(2, 'Thickness', minval=0, group=g11)
i_show_candle = (i_candle != option_hide) and (i_candle_border_width > 0)
i_show_candle_wick = i_candle == option_candle_wick
option_candle_color1 = 'Session\'s'
option_candle_color2 = 'Red • Green'
i_candle_color = input.string(option_candle_color2, 'Color ', options= , group=g11, inline='candle_color')
i_candle_color_g = input.color(#A6E22E, '', group=g11, inline='candle_color')
i_candle_color_r = input.color(#F92672, '', group=g11, inline='candle_color')
// Labels
i_label_show = input.bool(true, 'Labels', inline='label_show', group=g6) and i_show
i_label_size = str.lower(input.string('Small', '', options= , inline='label_show', group=g6))
i_label_position_y = str.lower(input.string('Top', '', options= , inline='label_show', group=g6))
i_label_position_s = str.lower(input.string('Outside', '', options= , inline='label_show', group=g6))
i_label_position = f_get_label_position(i_label_position_y, i_label_position_s)
i_label_format_name = input.bool(true, 'Name', inline='label_format', group=g6)
i_label_format_day = input.bool(false, 'Day', inline='label_format', group=g6)
i_label_format_price = input.bool(false, 'Price', inline='label_format', group=g6)
i_label_format_pips = input.bool(false, 'Pips', inline='label_format', group=g6)
// Fibonacci levels
i_f_linestyle = f_border_style(input.string(option_border_style1, title="Style", options= , group=g7))
i_f_linewidth = input.int(1, title="Thickness", minval=1, group=g7)
// Opening range
i_o_minutes = input.int(15, title='Periods (minutes)', minval=1, step=1, group=g5)
i_o_minutes := math.max(i_o_minutes, timeframe.multiplier + 1)
i_o_transp = input.int(88, title='Transp', minval=0, maxval=100, step=1, group=g5)
// Alerts
i_alert1_show = input.bool(false, 'Alerts - Sessions stard/end', group=g10)
i_alert2_show = input.bool(false, 'Alerts - Opening range breakouts', group=g10)
i_alert3_show = input.bool(false, 'Alerts - Price crossed session\'s High/Low after session closed', group=g10)
// ------------------------
// Drawing labels
// ------------------------
f_render_label (_show, _session, _is_started, _color, _top, _bottom, _text, _labels) =>
var label my_label = na
var int start_time = na
v_position_y = (i_label_position_y == 'top') ? _top : _bottom
v_label = array.new_string()
v_chg = _top - _bottom
if _is_started
start_time := time
if i_label_format_name and not na(_text)
array.push(v_label, _text)
if i_label_format_day
array.push(v_label, util.get_day(dayofweek(start_time, i_tz)))
if i_label_format_price
array.push(v_label, str.format(fmt_price, v_chg))
if i_label_format_pips
array.push(v_label, str.format(fmt_pips, util.toPips(v_chg)) + ' pips')
if _show
if _is_started
my_label := label.new(bar_index, v_position_y, array.join(v_label, icon_separator), textcolor=_color, color=color_none, size=i_label_size, style=i_label_position)
array.push(_labels, my_label)
util.clear_labels(_labels, i_history_period)
else if _session
label.set_y(my_label, v_position_y)
label.set_text(my_label, array.join(v_label, icon_separator))
// ------------------------
// Drawing Fibonacci levels
// ------------------------
f_render_fibonacci (_show, _session, _is_started, _x1, _x2, _color, _top, _bottom, _level, _width, _style, _is_extend, _lines) =>
var line my_line = na
if _show
y = (_top - _bottom) * _level + _bottom
if _is_started
my_line := line.new(_x1, y, _x2, y, width=_width, color=color.new(_color, 30), style=_style)
array.push(_lines, my_line)
if _is_extend
line.set_extend(my_line, extend.right)
else if _session
line.set_y1(my_line, y)
line.set_y2(my_line, y)
f_set_line_x2(my_line, _x2)
// ------------------------
// Drawing Opening range
// ------------------------
f_render_oprange (_show, _session, _is_started, _x1, _x2, _color, _max, _is_extend, _boxes) =>
var int start_time = na
var box my_box = na
top = ta.highest(high, _max)
bottom = ta.lowest(low, _max)
is_crossover = ta.crossover(close, box.get_top(my_box))
is_crossunder = ta.crossunder(close, box.get_bottom(my_box))
if _show
if _is_started
util.clear_boxes(_boxes, math.max(0, i_history_period - 1))
start_time := time
my_box := na
else if _session
time_op = start_time + (i_o_minutes * 60 * 1000)
time_op_delay = time_op - f_get_time_by_bar(1)
if time <= time_op and time > time_op_delay
my_box := box.new(_x1, top, _x2, bottom, border_width=0, bgcolor=color.new(_color, i_o_transp))
array.push(_boxes, my_box)
if _is_extend
box.set_extend(my_box, extend.right)
my_box
else
f_set_box_right(my_box, _x2)
if is_crossover
alert('Price crossed over the opening range', alert.freq_once_per_bar)
if i_alert2_show
label.new(bar_index, box.get_top(my_box), "×", color=color.blue, textcolor=ac.tradingview('blue'), style=label.style_none, size=size.large)
if is_crossunder
alert('Price crossed under the opening range', alert.freq_once_per_bar)
if i_alert2_show
label.new(bar_index, box.get_bottom(my_box), "×", color=color.red, textcolor=ac.tradingview('red'), style=label.style_none, size=size.large)
my_box
// ------------------------
// Drawing candle
// ------------------------
f_render_candle (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _open, _x1, _x2, _boxes, _lines) =>
var box body = na
var line wick1 = na
var line wick2 = na
border_width = i_candle_border_width
cx = math.round(math.avg(_x2, _x1)) - math.round(border_width / 2)
body_color = i_candle_color == option_candle_color2 ? close > _open ? i_candle_color_g : i_candle_color_r : _color
if _show
if _is_started
body := box.new(_x1, _top, _x2, _bottom, body_color, border_width, line.style_solid, bgcolor=color.new(color.black, 100))
wick1 := i_show_candle_wick ? line.new(cx, _top, cx, _top, color=_color, width=border_width, style=line.style_solid) : na
wick2 := i_show_candle_wick ? line.new(cx, _bottom, cx, _bottom, color=_color, width=border_width, style=line.style_solid) : na
array.push(_boxes, body)
array.push(_lines, wick1)
array.push(_lines, wick2)
util.clear_boxes(_boxes, i_history_period)
util.clear_lines(_lines, i_history_period * 2)
else if _session
top = math.max(_open, close)
bottom = math.min(_open, close)
box.set_top(body, top)
box.set_bottom(body, bottom)
box.set_right(body, _x2)
box.set_border_color(body, body_color)
line.set_y1(wick1, _top)
line.set_y2(wick1, top)
f_set_line_x1(wick1, cx)
f_set_line_x2(wick1, cx)
line.set_color(wick1, body_color)
line.set_y1(wick2, _bottom)
line.set_y2(wick2, bottom)
f_set_line_x1(wick2, cx)
f_set_line_x2(wick2, cx)
line.set_color(wick2, body_color)
else if _is_ended
box.set_right(body, bar_index)
// ------------------------
// Rendering limit message
// ------------------------
f_render_limitmessage (_show, _session, _is_started, _is_ended, _x, _y, _rightbars) =>
var label my_note = na
if _show
if _is_started
if _rightbars > max_bars
my_note := label.new(_x, _y, f_message_limit_bars(_rightbars), style=label.style_label_upper_left, color=color.yellow, textalign=text.align_left, yloc=yloc.price)
else if _session
if _rightbars > max_bars
label.set_y(my_note, _y)
label.set_text(my_note, f_message_limit_bars(_rightbars))
else
label.delete(my_note)
else if _is_ended
label.delete(my_note)
true
// Rendering session
//
f_render_sessionrange (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _x1, _x2, _is_extend, _lines) =>
var line above_line = na
var line below_line = na
if _show
if _is_started
above_line := line.new(_x1, _top, _x2, _top, width=i_sess_border_width, style=i_sess_border_style, color=_color)
below_line := line.new(_x1, _bottom, _x2, _bottom, width=i_sess_border_width, style=i_sess_border_style, color=_color)
linefill.new(above_line, below_line, color.new(_color, i_sess_bgopacity))
array.push(_lines, above_line)
array.push(_lines, below_line)
util.clear_lines(_lines, i_history_period * 2)
if _is_extend
line.set_extend(above_line, extend.right)
line.set_extend(below_line, extend.right)
else if _session
line.set_y1(above_line, _top)
line.set_y2(above_line, _top)
line.set_x2(above_line, _x2)
line.set_y1(below_line, _bottom)
line.set_y2(below_line, _bottom)
line.set_x2(below_line, _x2)
true
else if _is_ended
true
true
// ------------------------
// Rendering session box
// ------------------------
f_render_session (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _x1, _x2, _is_extend, _boxes) =>
var box my_box = na
if _show
if _is_started
my_box := box.new(_x1, _top, _x2, _bottom, _color, i_sess_border_width, i_sess_border_style, bgcolor=color.new(_color, i_sess_bgopacity))
array.push(_boxes, my_box)
util.clear_boxes(_boxes, i_history_period)
if _is_extend
box.set_extend(my_box, extend.right)
else if _session
box.set_top(my_box, _top)
box.set_bottom(my_box, _bottom)
f_set_box_right(my_box, _x2)
else if _is_ended
box.set_right(my_box, bar_index)
my_box
// ------------------------
// Drawing market
// ------------------------
f_render_main (_show, _session, _is_started, _is_ended, _color, _top, _bottom) =>
var box my_box = na
var label my_note = na
var x1 = 0
var x2 = 0
var session_open = 0.0
var session_high = 0.0
var session_low = 0.0
x0_1 = ta.valuewhen(na(_session ) and _session, bar_index, 1)
x0_2 = ta.valuewhen(na(_session) and _session , bar_index, 0)
x0_d = math.abs(x0_2 - x0_1)
limit_bars = max_bars
rightbars = x0_d
if _show
if _is_started
x1 := bar_index
x2 := bar_index + (math.min(x0_d, limit_bars))
session_open := open
session_high := _top
session_low := _bottom
else if _session
true_x2 = x1 + x0_d
rightbars := true_x2 - bar_index
limit_bars := bar_index + max_bars
x2 := math.min(true_x2, limit_bars)
session_high := _top
session_low := _bottom
else if _is_ended
session_open := na
// ------------------------
// Drawing
// ------------------------
draw (_show, _session, _color, _label, _extend, _show_fib, _show_op, _lookback, _boxes_session, _lines_session, _boxes_candle_body, _lines_candle_wick, _boxes_op, _lines_fib, _labels) =>
max = f_get_period(_session, 1, _lookback)
top = ta.highest(high, max)
bottom = ta.lowest(low, max)
is_started = f_get_started(_session)
is_ended = f_get_ended(_session)
is_extend = _extend != option_no
= f_render_main(_show, _session, is_started, is_ended, _color, top, bottom)
if i_sess_box_style == 'Box'
f_render_session(_show, _session, is_started, is_ended, _color, top, bottom, x1, x2, is_extend, _boxes_session)
if i_sess_box_style == 'Sandwich'
f_render_sessionrange(_show, _session, is_started, is_ended, _color, top, bottom, x1, x2, is_extend, _lines_session)
if i_show_candle
f_render_candle(_show, _session, is_started, is_ended, _color, top, bottom, _open, x1, x2, _boxes_candle_body, _lines_candle_wick)
if i_label_show
f_render_label(_show, _session, is_started, _color, top, bottom, _label, _labels)
if _show_op
f_render_oprange(_show, _session, is_started, x1, x2, _color, max, is_extend, _boxes_op)
if _show_fib
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.500, 2, line.style_solid, is_extend, _lines_fib)
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.628, i_f_linewidth, i_f_linestyle, is_extend, _lines_fib)
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.382, i_f_linewidth, i_f_linestyle, is_extend, _lines_fib)
util.clear_lines(_lines_fib, i_history_period * 3)
f_render_limitmessage(_show, _session, is_started, is_ended, x1, bottom, _rightbars)
///////////////////
// Calculating
///////////////////
string tz = (i_tz == option_no or i_tz == '') ? na : i_tz
int sess1 = time(timeframe.period, i_sess1, tz)
int sess2 = time(timeframe.period, i_sess2, tz)
int sess3 = time(timeframe.period, i_sess3, tz)
int sess4 = time(timeframe.period, i_sess4, tz)
///////////////////
// Plotting
///////////////////
var sess1_box = array.new()
var sess2_box = array.new()
var sess3_box = array.new()
var sess4_box = array.new()
var sess1_line = array.new()
var sess2_line = array.new()
var sess3_line = array.new()
var sess4_line = array.new()
var sess1_op = array.new()
var sess2_op = array.new()
var sess3_op = array.new()
var sess4_op = array.new()
var sess1_fib = array.new()
var sess2_fib = array.new()
var sess3_fib = array.new()
var sess4_fib = array.new()
var sess1_candle_body = array.new()
var sess2_candle_body = array.new()
var sess3_candle_body = array.new()
var sess4_candle_body = array.new()
var sess1_candle_wick = array.new()
var sess2_candle_wick = array.new()
var sess3_candle_wick = array.new()
var sess4_candle_wick = array.new()
var sess1_labels = array.new()
var sess2_labels = array.new()
var sess3_labels = array.new()
var sess4_labels = array.new()
= draw(i_show_sess1, sess1, i_sess1_color, i_sess1_label, i_sess1_extend, i_sess1_fib, i_sess1_op, i_lookback, sess1_box, sess1_line, sess1_candle_body, sess1_candle_wick, sess1_op, sess1_fib, sess1_labels)
= draw(i_show_sess2, sess2, i_sess2_color, i_sess2_label, i_sess2_extend, i_sess2_fib, i_sess2_op, i_lookback, sess2_box, sess2_line, sess2_candle_body, sess2_candle_wick, sess2_op, sess2_fib, sess2_labels)
= draw(i_show_sess3, sess3, i_sess3_color, i_sess3_label, i_sess3_extend, i_sess3_fib, i_sess3_op, i_lookback, sess3_box, sess3_line, sess3_candle_body, sess3_candle_wick, sess3_op, sess3_fib, sess3_labels)
= draw(i_show_sess4, sess4, i_sess4_color, i_sess4_label, i_sess4_extend, i_sess4_fib, i_sess4_op, i_lookback, sess4_box, sess4_line, sess4_candle_body, sess4_candle_wick, sess4_op, sess4_fib, sess4_labels)
is_positive_bar = close > open
color c_barcolor = na
color c_plotcandle = na
c_sess1_barcolor = (is_sess1) ? (is_positive_bar ? i_sess1_barcolor1 : i_sess1_barcolor2) : na
c_sess2_barcolor = (is_sess2) ? (is_positive_bar ? i_sess2_barcolor1 : i_sess2_barcolor2) : na
c_sess3_barcolor = (is_sess3) ? (is_positive_bar ? i_sess3_barcolor1 : i_sess3_barcolor2) : na
c_sess4_barcolor = (is_sess4) ? (is_positive_bar ? i_sess4_barcolor1 : i_sess4_barcolor2) : na
if (i_sess1_chart != option_chart_x) and is_sess1
c_barcolor := i_sess1_barcolor ? c_sess1_barcolor : na
c_plotcandle := i_sess1_plotcandle ? c_sess1_barcolor : na
if (i_sess2_chart != option_chart_x) and is_sess2
c_barcolor := i_sess2_barcolor ? c_sess2_barcolor : na
c_plotcandle := i_sess2_plotcandle ? c_sess2_barcolor : na
if (i_sess3_chart != option_chart_x) and is_sess3
c_barcolor := i_sess3_barcolor ? c_sess3_barcolor : na
c_plotcandle := i_sess3_plotcandle ? c_sess3_barcolor : na
if (i_sess4_chart != option_chart_x) and is_sess4
c_barcolor := i_sess4_barcolor ? c_sess4_barcolor : na
c_plotcandle := i_sess4_plotcandle ? c_sess4_barcolor : na
barcolor(c_barcolor)
plotcandle(open, high, low, close, color=is_positive_bar ? color_none : c_plotcandle, bordercolor=c_plotcandle, wickcolor=c_plotcandle)
////////////////////
// Alerts
////////////////////
// Session alerts
sess1_started = is_sess1 and not is_sess1 , sess1_ended = not is_sess1 and is_sess1
sess2_started = is_sess2 and not is_sess2 , sess2_ended = not is_sess2 and is_sess2
sess3_started = is_sess3 and not is_sess3 , sess3_ended = not is_sess3 and is_sess3
sess4_started = is_sess4 and not is_sess4 , sess4_ended = not is_sess4 and is_sess4
alertcondition(sess1_started, 'Session #1 started')
alertcondition(sess1_ended, 'Session #1 ended')
alertcondition(sess2_started, 'Session #2 started')
alertcondition(sess2_ended, 'Session #2 ended')
alertcondition(sess3_started, 'Session #3 started')
alertcondition(sess3_ended, 'Session #3 ended')
alertcondition(sess4_started, 'Session #4 started')
alertcondition(sess4_ended, 'Session #4 ended')
alertcondition((not is_sess1) and ta.crossover(close, sess1_high), 'Session #1 High crossed (after session closed)')
alertcondition((not is_sess1) and ta.crossunder(close, sess1_low), 'Session #1 Low crossed (after session closed)')
alertcondition((not is_sess2) and ta.crossover(close, sess2_high), 'Session #2 High crossed (after session closed)')
alertcondition((not is_sess2) and ta.crossunder(close, sess2_low), 'Session #2 Low crossed (after session closed)')
alertcondition((not is_sess3) and ta.crossover(close, sess3_high), 'Session #3 High crossed (after session closed)')
alertcondition((not is_sess3) and ta.crossunder(close, sess3_low), 'Session #3 Low crossed (after session closed)')
alertcondition((not is_sess4) and ta.crossover(close, sess4_high), 'Session #4 High crossed (after session closed)')
alertcondition((not is_sess4) and ta.crossunder(close, sess4_low), 'Session #4 Low crossed (after session closed)')
// Alerts visualized
if i_alert1_show
if i_show_sess1
if sess1_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess1_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess1_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess1_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess2
if sess2_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess2_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess2_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess2_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess3
if sess3_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess3_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess3_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess3_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess4
if sess4_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess4_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess4_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess4_color, textcolor=color_text, size=size.small, style=label.style_label_down)
plot(i_alert3_show ? sess1_high : na, 'sess1_high', style=plot.style_linebr, color=i_sess1_color)
plot(i_alert3_show ? sess1_low : na, 'sess1_low' , style=plot.style_linebr, color=i_sess1_color, linewidth=2)
plot(i_alert3_show ? sess2_high : na, 'sess2_high', style=plot.style_linebr, color=i_sess2_color)
plot(i_alert3_show ? sess2_low : na, 'sess2_low' , style=plot.style_linebr, color=i_sess2_color, linewidth=2)
plot(i_alert3_show ? sess3_high : na, 'sess3_high', style=plot.style_linebr, color=i_sess3_color)
plot(i_alert3_show ? sess3_low : na, 'sess3_low' , style=plot.style_linebr, color=i_sess3_color, linewidth=2)
plot(i_alert3_show ? sess4_high : na, 'sess4_high', style=plot.style_linebr, color=i_sess4_color)
plot(i_alert3_show ? sess4_low : na, 'sess4_low' , style=plot.style_linebr, color=i_sess4_color, linewidth=2)
plotshape(i_alert3_show and (not is_sess1) and ta.crossover(close, sess1_high) ? sess1_high : na, 'cross sess1_high', color=i_sess1_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess1) and ta.crossunder(close, sess1_low) ? sess1_low : na, 'cross sess1_low', color=i_sess1_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess2) and ta.crossover(close, sess2_high) ? sess2_high : na, 'cross sess2_high', color=i_sess2_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess2) and ta.crossunder(close, sess2_low) ? sess2_low : na, 'cross sess2_low', color=i_sess2_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess3) and ta.crossover(close, sess3_high) ? sess3_high : na, 'cross sess3_high', color=i_sess3_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess3) and ta.crossunder(close, sess3_low) ? sess3_low : na, 'cross sess3_low', color=i_sess3_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess4) and ta.crossover(close, sess4_high) ? sess4_high : na, 'cross sess4_high', color=i_sess4_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess4) and ta.crossunder(close, sess4_low) ? sess4_low : na, 'cross sess4_low', color=i_sess4_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
HSM MACROS//@version=5
indicator('HSM MACROS', 'HSM MACROS', overlay=true, max_bars_back=500, explicit_plot_zorder=true)
import boitoki/AwesomeColor/4 as ac
import boitoki/Utilities/3 as util
///////////////
// Groups
///////////////
g0 = 'GENERAL'
g1_01 = '♯1 SESSION'
g1_02 = '♯2 SESSION'
g1_03 = '♯3 SESSION'
g1_04 = '♯4 SESSION'
g4 = 'BOX'
g6 = 'LABELS'
g5 = 'OPENING RANGE'
g7 = 'FIBONACCI LEVELS'
g8 = 'OPTIONS'
g11 = 'CANDLE'
g10 = 'Alerts visualized'
///////////////
// Defined
///////////////
max_bars = 500
option_yes = 'Yes'
option_no = '× No'
option_extend1 = 'Yes'
option_hide = '× Hide'
option_border_style1 = '────'
option_border_style2 = '- - - - - -'
option_border_style3 = '•••••••••'
option_chart_x = '× No'
option_chart_1 = 'Bar color'
option_chart_2 = 'Candles'
fmt_price = '{0,number,#.#####}'
fmt_pips = '{0,number,#.#}'
icon_separator = ' • '
color_none = color.new(color.black, 100)
color_text = color.new(color.white, 0)
///////////////
// Functions
///////////////
f_get_time_by_bar(bar_count) => timeframe.multiplier * bar_count * 60 * 1000
f_border_style (_style) =>
switch _style
option_border_style1 => line.style_solid
option_border_style2 => line.style_dashed
option_border_style3 => line.style_dotted
=> _style
f_get_period (_session, _start, _lookback) =>
result = math.max(_start, 1)
for i = result to _lookback
if na(_session ) and _session
result := i+1
break
result
f_get_label_position (_y, _side) =>
switch _y
'top' => _side == 'outside' ? label.style_label_lower_left : label.style_label_upper_left
'bottom' => _side == 'outside' ? label.style_label_upper_left : label.style_label_lower_left
f_get_started (_session) => na(_session ) and _session
f_get_ended (_session) => na(_session) and _session
f_message_limit_bars (_v) => '⚠️ This box\'s right position exceeds 500 bars(' + str.tostring(_v) + '). This box is not displayed correctly.'
f_set_line_x1 (_line, _x) =>
if (line.get_x1(_line) != _x)
line.set_x1(_line, _x)
f_set_line_x2 (_line, _x) =>
if (line.get_x2(_line) != _x)
line.set_x2(_line, _x)
f_set_box_right (_box, _x) =>
if box.get_right(_box) != _x
box.set_right(_box, _x)
///////////////
// Inputs
///////////////
// Timezone
i_tz = input.string('GMT-4', title='Timezone', options= , tooltip='e.g. \'America/New_York\', \'Asia/Tokyo\', \'GMT-4\', \'GMT+9\'...', group=g0)
i_history_period = input.int(10, 'History', minval=0, group=g0)
i_show = i_history_period > 0
i_lookback = 12 * 60
// Sessions
i_show_sess1 = input.bool(true, 'Session 1 ', group=g1_01, inline='session1_1') and i_show
i_sess1_label = input.string('MC1', '', group=g1_01, inline='session1_1')
i_sess1_color = input.color(#0a0a0a, '', group=g1_01, inline='session1_1')
i_sess1_barcolor1 = input.color(#0a0a0a, '•', group=g1_01, inline='session1_1')
i_sess1_barcolor2 = input.color(#0a0a0a, '', group=g1_01, inline='session1_1')
i_sess1 = input.session('0820-0830', 'Time', group=g1_01)
i_sess1_extend = input.string(option_no, 'Extend', options= , group=g1_01)
i_sess1_fib = input.string(option_no, 'Fibonacci levels', group=g1_01, options= ) != option_no
i_sess1_op = input.string(option_no, 'Opening range', group=g1_01, options= ) != option_no and i_show
i_sess1_chart = input.string(option_chart_x, 'Bar', options= , group=g1_01)
i_sess1_barcolor = i_sess1_chart == option_chart_1
i_sess1_plotcandle = i_sess1_chart == option_chart_2
i_show_sess2 = input.bool(true, 'Session 2 ', group=g1_02, inline='session2_1') and i_show
i_sess2_label = input.string('MC2', '', group=g1_02, inline='session2_1')
i_sess2_color = input.color(#0a0a0a, '', group=g1_02, inline='session2_1')
i_sess2_barcolor1 = input.color(#0a0a0a, '•', group=g1_02, inline='session2_1')
i_sess2_barcolor2 = input.color(#0a0a0a, '', group=g1_02, inline='session2_1')
i_sess2 = input.session('0920-0930', 'Time', group=g1_02)
i_sess2_extend = input.string(option_no, 'Extend', options= , group=g1_02)
i_sess2_fib = input.string(option_no, 'Fibonacci levels', group=g1_02, options= ) != option_no
i_sess2_op = input.string(option_no, 'Opening range', group=g1_02, options= ) != option_no and i_show
i_sess2_chart = input.string(option_chart_x, 'Bar', options= , group=g1_02)
i_sess2_barcolor = i_sess2_chart == option_chart_1
i_sess2_plotcandle = i_sess2_chart == option_chart_2
i_show_sess3 = input.bool(true, 'Session 3 ', group=g1_03, inline='session3_1') and i_show
i_sess3_label = input.string('MC3', '', group=g1_03, inline='session3_1')
i_sess3_color = input.color(#0a0a0a, '', group=g1_03, inline='session3_1')
i_sess3_barcolor1 = input.color(#0a0a0a, '•', group=g1_03, inline='session3_1')
i_sess3_barcolor2 = input.color(#0a0a0a, '', group=g1_03, inline='session3_1')
i_sess3 = input.session('0950-1010', 'Time', group=g1_03)
i_sess3_extend = input.string(option_no, 'Extend', options= , group=g1_03)
i_sess3_fib = input.string(option_no, 'Fibonacci levels', group=g1_03, options= ) != option_no
i_sess3_op = input.string(option_no, 'Opening range', group=g1_03, options= ) != option_no and i_show
i_sess3_chart = input.string(option_chart_x, 'Bar', options= , group=g1_03)
i_sess3_barcolor = i_sess3_chart == option_chart_1
i_sess3_plotcandle = i_sess3_chart == option_chart_2
i_show_sess4 = input.bool(true, 'Session 4 ', group=g1_04, inline='session4_1') and i_show
i_sess4_label = input.string('MC4', '', group=g1_04, inline='session4_1')
i_sess4_color = input.color(#0a0a0a, '', group=g1_04, inline='session4_1')
i_sess4_barcolor1 = input.color(#0a0a0a, '•', group=g1_04, inline='session4_1')
i_sess4_barcolor2 = input.color(#0a0a0a, '', group=g1_04, inline='session4_1')
i_sess4 = input.session('1050-1110', 'Time', group=g1_04)
i_sess4_extend = input.string(option_no, 'Extend', options= , group=g1_04)
i_sess4_fib = input.string(option_no, 'Fibonacci levels', group=g1_04, options= ) != option_no
i_sess4_op = input.string(option_no, 'Opening range', group=g1_04, options= ) != option_no and i_show
i_sess4_chart = input.string(option_chart_x, 'Bar', options= , group=g1_04)
i_sess4_barcolor = i_sess4_chart == option_chart_1
i_sess4_plotcandle = i_sess4_chart == option_chart_2
// Show & Styles
i_sess_box_style = input.string('Box', 'Style', options= , group=g4)
i_sess_border_style = f_border_style(input.string(option_border_style2, 'Line style', options= , group=g4))
i_sess_border_width = input.int(1, 'Thickness', minval=0, group=g4)
i_sess_bgopacity = input.int(94, 'Transp', minval=0, maxval=100, step=1, group=g4, tooltip='Setting the 100 is no background color')
// Candle
option_candle_body = 'OC'
option_candle_wick = 'OHLC'
i_candle = input.string(option_hide, 'Display', options= , group=g11)
i_candle_border_width = input.int(2, 'Thickness', minval=0, group=g11)
i_show_candle = (i_candle != option_hide) and (i_candle_border_width > 0)
i_show_candle_wick = i_candle == option_candle_wick
option_candle_color1 = 'Session\'s'
option_candle_color2 = 'Red • Green'
i_candle_color = input.string(option_candle_color2, 'Color ', options= , group=g11, inline='candle_color')
i_candle_color_g = input.color(#A6E22E, '', group=g11, inline='candle_color')
i_candle_color_r = input.color(#F92672, '', group=g11, inline='candle_color')
// Labels
i_label_show = input.bool(true, 'Labels', inline='label_show', group=g6) and i_show
i_label_size = str.lower(input.string('Small', '', options= , inline='label_show', group=g6))
i_label_position_y = str.lower(input.string('Top', '', options= , inline='label_show', group=g6))
i_label_position_s = str.lower(input.string('Outside', '', options= , inline='label_show', group=g6))
i_label_position = f_get_label_position(i_label_position_y, i_label_position_s)
i_label_format_name = input.bool(true, 'Name', inline='label_format', group=g6)
i_label_format_day = input.bool(false, 'Day', inline='label_format', group=g6)
i_label_format_price = input.bool(false, 'Price', inline='label_format', group=g6)
i_label_format_pips = input.bool(false, 'Pips', inline='label_format', group=g6)
// Fibonacci levels
i_f_linestyle = f_border_style(input.string(option_border_style1, title="Style", options= , group=g7))
i_f_linewidth = input.int(1, title="Thickness", minval=1, group=g7)
// Opening range
i_o_minutes = input.int(15, title='Periods (minutes)', minval=1, step=1, group=g5)
i_o_minutes := math.max(i_o_minutes, timeframe.multiplier + 1)
i_o_transp = input.int(88, title='Transp', minval=0, maxval=100, step=1, group=g5)
// Alerts
i_alert1_show = input.bool(false, 'Alerts - Sessions stard/end', group=g10)
i_alert2_show = input.bool(false, 'Alerts - Opening range breakouts', group=g10)
i_alert3_show = input.bool(false, 'Alerts - Price crossed session\'s High/Low after session closed', group=g10)
// ------------------------
// Drawing labels
// ------------------------
f_render_label (_show, _session, _is_started, _color, _top, _bottom, _text, _labels) =>
var label my_label = na
var int start_time = na
v_position_y = (i_label_position_y == 'top') ? _top : _bottom
v_label = array.new_string()
v_chg = _top - _bottom
if _is_started
start_time := time
if i_label_format_name and not na(_text)
array.push(v_label, _text)
if i_label_format_day
array.push(v_label, util.get_day(dayofweek(start_time, i_tz)))
if i_label_format_price
array.push(v_label, str.format(fmt_price, v_chg))
if i_label_format_pips
array.push(v_label, str.format(fmt_pips, util.toPips(v_chg)) + ' pips')
if _show
if _is_started
my_label := label.new(bar_index, v_position_y, array.join(v_label, icon_separator), textcolor=_color, color=color_none, size=i_label_size, style=i_label_position)
array.push(_labels, my_label)
util.clear_labels(_labels, i_history_period)
else if _session
label.set_y(my_label, v_position_y)
label.set_text(my_label, array.join(v_label, icon_separator))
// ------------------------
// Drawing Fibonacci levels
// ------------------------
f_render_fibonacci (_show, _session, _is_started, _x1, _x2, _color, _top, _bottom, _level, _width, _style, _is_extend, _lines) =>
var line my_line = na
if _show
y = (_top - _bottom) * _level + _bottom
if _is_started
my_line := line.new(_x1, y, _x2, y, width=_width, color=color.new(_color, 30), style=_style)
array.push(_lines, my_line)
if _is_extend
line.set_extend(my_line, extend.right)
else if _session
line.set_y1(my_line, y)
line.set_y2(my_line, y)
f_set_line_x2(my_line, _x2)
// ------------------------
// Drawing Opening range
// ------------------------
f_render_oprange (_show, _session, _is_started, _x1, _x2, _color, _max, _is_extend, _boxes) =>
var int start_time = na
var box my_box = na
top = ta.highest(high, _max)
bottom = ta.lowest(low, _max)
is_crossover = ta.crossover(close, box.get_top(my_box))
is_crossunder = ta.crossunder(close, box.get_bottom(my_box))
if _show
if _is_started
util.clear_boxes(_boxes, math.max(0, i_history_period - 1))
start_time := time
my_box := na
else if _session
time_op = start_time + (i_o_minutes * 60 * 1000)
time_op_delay = time_op - f_get_time_by_bar(1)
if time <= time_op and time > time_op_delay
my_box := box.new(_x1, top, _x2, bottom, border_width=0, bgcolor=color.new(_color, i_o_transp))
array.push(_boxes, my_box)
if _is_extend
box.set_extend(my_box, extend.right)
my_box
else
f_set_box_right(my_box, _x2)
if is_crossover
alert('Price crossed over the opening range', alert.freq_once_per_bar)
if i_alert2_show
label.new(bar_index, box.get_top(my_box), "×", color=color.blue, textcolor=ac.tradingview('blue'), style=label.style_none, size=size.large)
if is_crossunder
alert('Price crossed under the opening range', alert.freq_once_per_bar)
if i_alert2_show
label.new(bar_index, box.get_bottom(my_box), "×", color=color.red, textcolor=ac.tradingview('red'), style=label.style_none, size=size.large)
my_box
// ------------------------
// Drawing candle
// ------------------------
f_render_candle (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _open, _x1, _x2, _boxes, _lines) =>
var box body = na
var line wick1 = na
var line wick2 = na
border_width = i_candle_border_width
cx = math.round(math.avg(_x2, _x1)) - math.round(border_width / 2)
body_color = i_candle_color == option_candle_color2 ? close > _open ? i_candle_color_g : i_candle_color_r : _color
if _show
if _is_started
body := box.new(_x1, _top, _x2, _bottom, body_color, border_width, line.style_solid, bgcolor=color.new(color.black, 100))
wick1 := i_show_candle_wick ? line.new(cx, _top, cx, _top, color=_color, width=border_width, style=line.style_solid) : na
wick2 := i_show_candle_wick ? line.new(cx, _bottom, cx, _bottom, color=_color, width=border_width, style=line.style_solid) : na
array.push(_boxes, body)
array.push(_lines, wick1)
array.push(_lines, wick2)
util.clear_boxes(_boxes, i_history_period)
util.clear_lines(_lines, i_history_period * 2)
else if _session
top = math.max(_open, close)
bottom = math.min(_open, close)
box.set_top(body, top)
box.set_bottom(body, bottom)
box.set_right(body, _x2)
box.set_border_color(body, body_color)
line.set_y1(wick1, _top)
line.set_y2(wick1, top)
f_set_line_x1(wick1, cx)
f_set_line_x2(wick1, cx)
line.set_color(wick1, body_color)
line.set_y1(wick2, _bottom)
line.set_y2(wick2, bottom)
f_set_line_x1(wick2, cx)
f_set_line_x2(wick2, cx)
line.set_color(wick2, body_color)
else if _is_ended
box.set_right(body, bar_index)
// ------------------------
// Rendering limit message
// ------------------------
f_render_limitmessage (_show, _session, _is_started, _is_ended, _x, _y, _rightbars) =>
var label my_note = na
if _show
if _is_started
if _rightbars > max_bars
my_note := label.new(_x, _y, f_message_limit_bars(_rightbars), style=label.style_label_upper_left, color=color.yellow, textalign=text.align_left, yloc=yloc.price)
else if _session
if _rightbars > max_bars
label.set_y(my_note, _y)
label.set_text(my_note, f_message_limit_bars(_rightbars))
else
label.delete(my_note)
else if _is_ended
label.delete(my_note)
true
// Rendering session
//
f_render_sessionrange (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _x1, _x2, _is_extend, _lines) =>
var line above_line = na
var line below_line = na
if _show
if _is_started
above_line := line.new(_x1, _top, _x2, _top, width=i_sess_border_width, style=i_sess_border_style, color=_color)
below_line := line.new(_x1, _bottom, _x2, _bottom, width=i_sess_border_width, style=i_sess_border_style, color=_color)
linefill.new(above_line, below_line, color.new(_color, i_sess_bgopacity))
array.push(_lines, above_line)
array.push(_lines, below_line)
util.clear_lines(_lines, i_history_period * 2)
if _is_extend
line.set_extend(above_line, extend.right)
line.set_extend(below_line, extend.right)
else if _session
line.set_y1(above_line, _top)
line.set_y2(above_line, _top)
line.set_x2(above_line, _x2)
line.set_y1(below_line, _bottom)
line.set_y2(below_line, _bottom)
line.set_x2(below_line, _x2)
true
else if _is_ended
true
true
// ------------------------
// Rendering session box
// ------------------------
f_render_session (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _x1, _x2, _is_extend, _boxes) =>
var box my_box = na
if _show
if _is_started
my_box := box.new(_x1, _top, _x2, _bottom, _color, i_sess_border_width, i_sess_border_style, bgcolor=color.new(_color, i_sess_bgopacity))
array.push(_boxes, my_box)
util.clear_boxes(_boxes, i_history_period)
if _is_extend
box.set_extend(my_box, extend.right)
else if _session
box.set_top(my_box, _top)
box.set_bottom(my_box, _bottom)
f_set_box_right(my_box, _x2)
else if _is_ended
box.set_right(my_box, bar_index)
my_box
// ------------------------
// Drawing market
// ------------------------
f_render_main (_show, _session, _is_started, _is_ended, _color, _top, _bottom) =>
var box my_box = na
var label my_note = na
var x1 = 0
var x2 = 0
var session_open = 0.0
var session_high = 0.0
var session_low = 0.0
x0_1 = ta.valuewhen(na(_session ) and _session, bar_index, 1)
x0_2 = ta.valuewhen(na(_session) and _session , bar_index, 0)
x0_d = math.abs(x0_2 - x0_1)
limit_bars = max_bars
rightbars = x0_d
if _show
if _is_started
x1 := bar_index
x2 := bar_index + (math.min(x0_d, limit_bars))
session_open := open
session_high := _top
session_low := _bottom
else if _session
true_x2 = x1 + x0_d
rightbars := true_x2 - bar_index
limit_bars := bar_index + max_bars
x2 := math.min(true_x2, limit_bars)
session_high := _top
session_low := _bottom
else if _is_ended
session_open := na
// ------------------------
// Drawing
// ------------------------
draw (_show, _session, _color, _label, _extend, _show_fib, _show_op, _lookback, _boxes_session, _lines_session, _boxes_candle_body, _lines_candle_wick, _boxes_op, _lines_fib, _labels) =>
max = f_get_period(_session, 1, _lookback)
top = ta.highest(high, max)
bottom = ta.lowest(low, max)
is_started = f_get_started(_session)
is_ended = f_get_ended(_session)
is_extend = _extend != option_no
= f_render_main(_show, _session, is_started, is_ended, _color, top, bottom)
if i_sess_box_style == 'Box'
f_render_session(_show, _session, is_started, is_ended, _color, top, bottom, x1, x2, is_extend, _boxes_session)
if i_sess_box_style == 'Sandwich'
f_render_sessionrange(_show, _session, is_started, is_ended, _color, top, bottom, x1, x2, is_extend, _lines_session)
if i_show_candle
f_render_candle(_show, _session, is_started, is_ended, _color, top, bottom, _open, x1, x2, _boxes_candle_body, _lines_candle_wick)
if i_label_show
f_render_label(_show, _session, is_started, _color, top, bottom, _label, _labels)
if _show_op
f_render_oprange(_show, _session, is_started, x1, x2, _color, max, is_extend, _boxes_op)
if _show_fib
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.500, 2, line.style_solid, is_extend, _lines_fib)
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.628, i_f_linewidth, i_f_linestyle, is_extend, _lines_fib)
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.382, i_f_linewidth, i_f_linestyle, is_extend, _lines_fib)
util.clear_lines(_lines_fib, i_history_period * 3)
f_render_limitmessage(_show, _session, is_started, is_ended, x1, bottom, _rightbars)
///////////////////
// Calculating
///////////////////
string tz = (i_tz == option_no or i_tz == '') ? na : i_tz
int sess1 = time(timeframe.period, i_sess1, tz)
int sess2 = time(timeframe.period, i_sess2, tz)
int sess3 = time(timeframe.period, i_sess3, tz)
int sess4 = time(timeframe.period, i_sess4, tz)
///////////////////
// Plotting
///////////////////
var sess1_box = array.new()
var sess2_box = array.new()
var sess3_box = array.new()
var sess4_box = array.new()
var sess1_line = array.new()
var sess2_line = array.new()
var sess3_line = array.new()
var sess4_line = array.new()
var sess1_op = array.new()
var sess2_op = array.new()
var sess3_op = array.new()
var sess4_op = array.new()
var sess1_fib = array.new()
var sess2_fib = array.new()
var sess3_fib = array.new()
var sess4_fib = array.new()
var sess1_candle_body = array.new()
var sess2_candle_body = array.new()
var sess3_candle_body = array.new()
var sess4_candle_body = array.new()
var sess1_candle_wick = array.new()
var sess2_candle_wick = array.new()
var sess3_candle_wick = array.new()
var sess4_candle_wick = array.new()
var sess1_labels = array.new()
var sess2_labels = array.new()
var sess3_labels = array.new()
var sess4_labels = array.new()
= draw(i_show_sess1, sess1, i_sess1_color, i_sess1_label, i_sess1_extend, i_sess1_fib, i_sess1_op, i_lookback, sess1_box, sess1_line, sess1_candle_body, sess1_candle_wick, sess1_op, sess1_fib, sess1_labels)
= draw(i_show_sess2, sess2, i_sess2_color, i_sess2_label, i_sess2_extend, i_sess2_fib, i_sess2_op, i_lookback, sess2_box, sess2_line, sess2_candle_body, sess2_candle_wick, sess2_op, sess2_fib, sess2_labels)
= draw(i_show_sess3, sess3, i_sess3_color, i_sess3_label, i_sess3_extend, i_sess3_fib, i_sess3_op, i_lookback, sess3_box, sess3_line, sess3_candle_body, sess3_candle_wick, sess3_op, sess3_fib, sess3_labels)
= draw(i_show_sess4, sess4, i_sess4_color, i_sess4_label, i_sess4_extend, i_sess4_fib, i_sess4_op, i_lookback, sess4_box, sess4_line, sess4_candle_body, sess4_candle_wick, sess4_op, sess4_fib, sess4_labels)
is_positive_bar = close > open
color c_barcolor = na
color c_plotcandle = na
c_sess1_barcolor = (is_sess1) ? (is_positive_bar ? i_sess1_barcolor1 : i_sess1_barcolor2) : na
c_sess2_barcolor = (is_sess2) ? (is_positive_bar ? i_sess2_barcolor1 : i_sess2_barcolor2) : na
c_sess3_barcolor = (is_sess3) ? (is_positive_bar ? i_sess3_barcolor1 : i_sess3_barcolor2) : na
c_sess4_barcolor = (is_sess4) ? (is_positive_bar ? i_sess4_barcolor1 : i_sess4_barcolor2) : na
if (i_sess1_chart != option_chart_x) and is_sess1
c_barcolor := i_sess1_barcolor ? c_sess1_barcolor : na
c_plotcandle := i_sess1_plotcandle ? c_sess1_barcolor : na
if (i_sess2_chart != option_chart_x) and is_sess2
c_barcolor := i_sess2_barcolor ? c_sess2_barcolor : na
c_plotcandle := i_sess2_plotcandle ? c_sess2_barcolor : na
if (i_sess3_chart != option_chart_x) and is_sess3
c_barcolor := i_sess3_barcolor ? c_sess3_barcolor : na
c_plotcandle := i_sess3_plotcandle ? c_sess3_barcolor : na
if (i_sess4_chart != option_chart_x) and is_sess4
c_barcolor := i_sess4_barcolor ? c_sess4_barcolor : na
c_plotcandle := i_sess4_plotcandle ? c_sess4_barcolor : na
barcolor(c_barcolor)
plotcandle(open, high, low, close, color=is_positive_bar ? color_none : c_plotcandle, bordercolor=c_plotcandle, wickcolor=c_plotcandle)
////////////////////
// Alerts
////////////////////
// Session alerts
sess1_started = is_sess1 and not is_sess1 , sess1_ended = not is_sess1 and is_sess1
sess2_started = is_sess2 and not is_sess2 , sess2_ended = not is_sess2 and is_sess2
sess3_started = is_sess3 and not is_sess3 , sess3_ended = not is_sess3 and is_sess3
sess4_started = is_sess4 and not is_sess4 , sess4_ended = not is_sess4 and is_sess4
alertcondition(sess1_started, 'Session #1 started')
alertcondition(sess1_ended, 'Session #1 ended')
alertcondition(sess2_started, 'Session #2 started')
alertcondition(sess2_ended, 'Session #2 ended')
alertcondition(sess3_started, 'Session #3 started')
alertcondition(sess3_ended, 'Session #3 ended')
alertcondition(sess4_started, 'Session #4 started')
alertcondition(sess4_ended, 'Session #4 ended')
alertcondition((not is_sess1) and ta.crossover(close, sess1_high), 'Session #1 High crossed (after session closed)')
alertcondition((not is_sess1) and ta.crossunder(close, sess1_low), 'Session #1 Low crossed (after session closed)')
alertcondition((not is_sess2) and ta.crossover(close, sess2_high), 'Session #2 High crossed (after session closed)')
alertcondition((not is_sess2) and ta.crossunder(close, sess2_low), 'Session #2 Low crossed (after session closed)')
alertcondition((not is_sess3) and ta.crossover(close, sess3_high), 'Session #3 High crossed (after session closed)')
alertcondition((not is_sess3) and ta.crossunder(close, sess3_low), 'Session #3 Low crossed (after session closed)')
alertcondition((not is_sess4) and ta.crossover(close, sess4_high), 'Session #4 High crossed (after session closed)')
alertcondition((not is_sess4) and ta.crossunder(close, sess4_low), 'Session #4 Low crossed (after session closed)')
// Alerts visualized
if i_alert1_show
if i_show_sess1
if sess1_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess1_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess1_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess1_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess2
if sess2_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess2_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess2_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess2_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess3
if sess3_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess3_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess3_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess3_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess4
if sess4_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess4_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess4_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess4_color, textcolor=color_text, size=size.small, style=label.style_label_down)
plot(i_alert3_show ? sess1_high : na, 'sess1_high', style=plot.style_linebr, color=i_sess1_color)
plot(i_alert3_show ? sess1_low : na, 'sess1_low' , style=plot.style_linebr, color=i_sess1_color, linewidth=2)
plot(i_alert3_show ? sess2_high : na, 'sess2_high', style=plot.style_linebr, color=i_sess2_color)
plot(i_alert3_show ? sess2_low : na, 'sess2_low' , style=plot.style_linebr, color=i_sess2_color, linewidth=2)
plot(i_alert3_show ? sess3_high : na, 'sess3_high', style=plot.style_linebr, color=i_sess3_color)
plot(i_alert3_show ? sess3_low : na, 'sess3_low' , style=plot.style_linebr, color=i_sess3_color, linewidth=2)
plot(i_alert3_show ? sess4_high : na, 'sess4_high', style=plot.style_linebr, color=i_sess4_color)
plot(i_alert3_show ? sess4_low : na, 'sess4_low' , style=plot.style_linebr, color=i_sess4_color, linewidth=2)
plotshape(i_alert3_show and (not is_sess1) and ta.crossover(close, sess1_high) ? sess1_high : na, 'cross sess1_high', color=i_sess1_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess1) and ta.crossunder(close, sess1_low) ? sess1_low : na, 'cross sess1_low', color=i_sess1_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess2) and ta.crossover(close, sess2_high) ? sess2_high : na, 'cross sess2_high', color=i_sess2_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess2) and ta.crossunder(close, sess2_low) ? sess2_low : na, 'cross sess2_low', color=i_sess2_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess3) and ta.crossover(close, sess3_high) ? sess3_high : na, 'cross sess3_high', color=i_sess3_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess3) and ta.crossunder(close, sess3_low) ? sess3_low : na, 'cross sess3_low', color=i_sess3_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess4) and ta.crossover(close, sess4_high) ? sess4_high : na, 'cross sess4_high', color=i_sess4_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess4) and ta.crossunder(close, sess4_low) ? sess4_low : na, 'cross sess4_low', color=i_sess4_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
HSM BULLET//@version=5
indicator('HSM BULLET', 'HSM BULLET', overlay=true, max_bars_back=500, explicit_plot_zorder=true)
import boitoki/AwesomeColor/4 as ac
import boitoki/Utilities/3 as util
///////////////
// Groups
///////////////
g0 = 'GENERAL'
g1_01 = '♯1 SESSION'
g1_02 = '♯2 SESSION'
g1_03 = '♯3 SESSION'
g1_04 = '♯4 SESSION'
g4 = 'BOX'
g6 = 'LABELS'
g5 = 'OPENING RANGE'
g7 = 'FIBONACCI LEVELS'
g8 = 'OPTIONS'
g11 = 'CANDLE'
g10 = 'Alerts visualized'
///////////////
// Defined
///////////////
max_bars = 500
option_yes = 'Yes'
option_no = '× No'
option_extend1 = 'Yes'
option_hide = '× Hide'
option_border_style1 = '────'
option_border_style2 = '- - - - - -'
option_border_style3 = '•••••••••'
option_chart_x = '× No'
option_chart_1 = 'Bar color'
option_chart_2 = 'Candles'
fmt_price = '{0,number,#.#####}'
fmt_pips = '{0,number,#.#}'
icon_separator = ' • '
color_none = color.new(color.black, 100)
color_text = color.new(color.white, 0)
///////////////
// Functions
///////////////
f_get_time_by_bar(bar_count) => timeframe.multiplier * bar_count * 60 * 1000
f_border_style (_style) =>
switch _style
option_border_style1 => line.style_solid
option_border_style2 => line.style_dashed
option_border_style3 => line.style_dotted
=> _style
f_get_period (_session, _start, _lookback) =>
result = math.max(_start, 1)
for i = result to _lookback
if na(_session ) and _session
result := i+1
break
result
f_get_label_position (_y, _side) =>
switch _y
'top' => _side == 'outside' ? label.style_label_lower_left : label.style_label_upper_left
'bottom' => _side == 'outside' ? label.style_label_upper_left : label.style_label_lower_left
f_get_started (_session) => na(_session ) and _session
f_get_ended (_session) => na(_session) and _session
f_message_limit_bars (_v) => '⚠️ This box\'s right position exceeds 500 bars(' + str.tostring(_v) + '). This box is not displayed correctly.'
f_set_line_x1 (_line, _x) =>
if (line.get_x1(_line) != _x)
line.set_x1(_line, _x)
f_set_line_x2 (_line, _x) =>
if (line.get_x2(_line) != _x)
line.set_x2(_line, _x)
f_set_box_right (_box, _x) =>
if box.get_right(_box) != _x
box.set_right(_box, _x)
///////////////
// Inputs
///////////////
// Timezone
i_tz = input.string('GMT-4', title='Timezone', options= , tooltip='e.g. \'America/New_York\', \'Asia/Tokyo\', \'GMT-4\', \'GMT+9\'...', group=g0)
i_history_period = input.int(10, 'History', minval=0, group=g0)
i_show = i_history_period > 0
i_lookback = 12 * 60
// Sessions
i_show_sess1 = input.bool(true, 'Session 1 ', group=g1_01, inline='session1_1') and i_show
i_sess1_label = input.string('London Silver', '', group=g1_01, inline='session1_1')
i_sess1_color = input.color(#0a0a0a, '', group=g1_01, inline='session1_1')
i_sess1_barcolor1 = input.color(#0a0a0a, '•', group=g1_01, inline='session1_1')
i_sess1_barcolor2 = input.color(#0a0a0a, '', group=g1_01, inline='session1_1')
i_sess1 = input.session('0300-0400', 'Time', group=g1_01)
i_sess1_extend = input.string(option_no, 'Extend', options= , group=g1_01)
i_sess1_fib = input.string(option_no, 'Fibonacci levels', group=g1_01, options= ) != option_no
i_sess1_op = input.string(option_no, 'Opening range', group=g1_01, options= ) != option_no and i_show
i_sess1_chart = input.string(option_chart_x, 'Bar', options= , group=g1_01)
i_sess1_barcolor = i_sess1_chart == option_chart_1
i_sess1_plotcandle = i_sess1_chart == option_chart_2
i_show_sess2 = input.bool(true, 'Session 2 ', group=g1_02, inline='session2_1') and i_show
i_sess2_label = input.string('NY AM Bullet', '', group=g1_02, inline='session2_1')
i_sess2_color = input.color(#0a0a0a, '', group=g1_02, inline='session2_1')
i_sess2_barcolor1 = input.color(#0a0a0a, '•', group=g1_02, inline='session2_1')
i_sess2_barcolor2 = input.color(#0a0a0a, '', group=g1_02, inline='session2_1')
i_sess2 = input.session('1000-1100', 'Time', group=g1_02)
i_sess2_extend = input.string(option_no, 'Extend', options= , group=g1_02)
i_sess2_fib = input.string(option_no, 'Fibonacci levels', group=g1_02, options= ) != option_no
i_sess2_op = input.string(option_no, 'Opening range', group=g1_02, options= ) != option_no and i_show
i_sess2_chart = input.string(option_chart_x, 'Bar', options= , group=g1_02)
i_sess2_barcolor = i_sess2_chart == option_chart_1
i_sess2_plotcandle = i_sess2_chart == option_chart_2
i_show_sess3 = input.bool(true, 'Session 3 ', group=g1_03, inline='session3_1') and i_show
i_sess3_label = input.string('NY PM Bullet', '', group=g1_03, inline='session3_1')
i_sess3_color = input.color(#0a0a0a, '', group=g1_03, inline='session3_1')
i_sess3_barcolor1 = input.color(#0a0a0a, '•', group=g1_03, inline='session3_1')
i_sess3_barcolor2 = input.color(#0a0a0a, '', group=g1_03, inline='session3_1')
i_sess3 = input.session('1400-1500', 'Time', group=g1_03)
i_sess3_extend = input.string(option_no, 'Extend', options= , group=g1_03)
i_sess3_fib = input.string(option_no, 'Fibonacci levels', group=g1_03, options= ) != option_no
i_sess3_op = input.string(option_no, 'Opening range', group=g1_03, options= ) != option_no and i_show
i_sess3_chart = input.string(option_chart_x, 'Bar', options= , group=g1_03)
i_sess3_barcolor = i_sess3_chart == option_chart_1
i_sess3_plotcandle = i_sess3_chart == option_chart_2
i_show_sess4 = input.bool(true, 'Session 4 ', group=g1_04, inline='session4_1') and i_show
i_sess4_label = input.string(' ', '', group=g1_04, inline='session4_1')
i_sess4_color = input.color(#0a0a0a, '', group=g1_04, inline='session4_1')
i_sess4_barcolor1 = input.color(#0a0a0a, '•', group=g1_04, inline='session4_1')
i_sess4_barcolor2 = input.color(#0a0a0a, '', group=g1_04, inline='session4_1')
i_sess4 = input.session('1000-1000', 'Time', group=g1_04)
i_sess4_extend = input.string(option_no, 'Extend', options= , group=g1_04)
i_sess4_fib = input.string(option_no, 'Fibonacci levels', group=g1_04, options= ) != option_no
i_sess4_op = input.string(option_no, 'Opening range', group=g1_04, options= ) != option_no and i_show
i_sess4_chart = input.string(option_chart_x, 'Bar', options= , group=g1_04)
i_sess4_barcolor = i_sess4_chart == option_chart_1
i_sess4_plotcandle = i_sess4_chart == option_chart_2
// Show & Styles
i_sess_box_style = input.string('Box', 'Style', options= , group=g4)
i_sess_border_style = f_border_style(input.string(option_border_style2, 'Line style', options= , group=g4))
i_sess_border_width = input.int(1, 'Thickness', minval=0, group=g4)
i_sess_bgopacity = input.int(94, 'Transp', minval=0, maxval=100, step=1, group=g4, tooltip='Setting the 100 is no background color')
// Candle
option_candle_body = 'OC'
option_candle_wick = 'OHLC'
i_candle = input.string(option_hide, 'Display', options= , group=g11)
i_candle_border_width = input.int(2, 'Thickness', minval=0, group=g11)
i_show_candle = (i_candle != option_hide) and (i_candle_border_width > 0)
i_show_candle_wick = i_candle == option_candle_wick
option_candle_color1 = 'Session\'s'
option_candle_color2 = 'Red • Green'
i_candle_color = input.string(option_candle_color2, 'Color ', options= , group=g11, inline='candle_color')
i_candle_color_g = input.color(#A6E22E, '', group=g11, inline='candle_color')
i_candle_color_r = input.color(#F92672, '', group=g11, inline='candle_color')
// Labels
i_label_show = input.bool(true, 'Labels', inline='label_show', group=g6) and i_show
i_label_size = str.lower(input.string('Small', '', options= , inline='label_show', group=g6))
i_label_position_y = str.lower(input.string('Top', '', options= , inline='label_show', group=g6))
i_label_position_s = str.lower(input.string('Outside', '', options= , inline='label_show', group=g6))
i_label_position = f_get_label_position(i_label_position_y, i_label_position_s)
i_label_format_name = input.bool(true, 'Name', inline='label_format', group=g6)
i_label_format_day = input.bool(false, 'Day', inline='label_format', group=g6)
i_label_format_price = input.bool(false, 'Price', inline='label_format', group=g6)
i_label_format_pips = input.bool(false, 'Pips', inline='label_format', group=g6)
// Fibonacci levels
i_f_linestyle = f_border_style(input.string(option_border_style1, title="Style", options= , group=g7))
i_f_linewidth = input.int(1, title="Thickness", minval=1, group=g7)
// Opening range
i_o_minutes = input.int(15, title='Periods (minutes)', minval=1, step=1, group=g5)
i_o_minutes := math.max(i_o_minutes, timeframe.multiplier + 1)
i_o_transp = input.int(88, title='Transp', minval=0, maxval=100, step=1, group=g5)
// Alerts
i_alert1_show = input.bool(false, 'Alerts - Sessions stard/end', group=g10)
i_alert2_show = input.bool(false, 'Alerts - Opening range breakouts', group=g10)
i_alert3_show = input.bool(false, 'Alerts - Price crossed session\'s High/Low after session closed', group=g10)
// ------------------------
// Drawing labels
// ------------------------
f_render_label (_show, _session, _is_started, _color, _top, _bottom, _text, _labels) =>
var label my_label = na
var int start_time = na
v_position_y = (i_label_position_y == 'top') ? _top : _bottom
v_label = array.new_string()
v_chg = _top - _bottom
if _is_started
start_time := time
if i_label_format_name and not na(_text)
array.push(v_label, _text)
if i_label_format_day
array.push(v_label, util.get_day(dayofweek(start_time, i_tz)))
if i_label_format_price
array.push(v_label, str.format(fmt_price, v_chg))
if i_label_format_pips
array.push(v_label, str.format(fmt_pips, util.toPips(v_chg)) + ' pips')
if _show
if _is_started
my_label := label.new(bar_index, v_position_y, array.join(v_label, icon_separator), textcolor=_color, color=color_none, size=i_label_size, style=i_label_position)
array.push(_labels, my_label)
util.clear_labels(_labels, i_history_period)
else if _session
label.set_y(my_label, v_position_y)
label.set_text(my_label, array.join(v_label, icon_separator))
// ------------------------
// Drawing Fibonacci levels
// ------------------------
f_render_fibonacci (_show, _session, _is_started, _x1, _x2, _color, _top, _bottom, _level, _width, _style, _is_extend, _lines) =>
var line my_line = na
if _show
y = (_top - _bottom) * _level + _bottom
if _is_started
my_line := line.new(_x1, y, _x2, y, width=_width, color=color.new(_color, 30), style=_style)
array.push(_lines, my_line)
if _is_extend
line.set_extend(my_line, extend.right)
else if _session
line.set_y1(my_line, y)
line.set_y2(my_line, y)
f_set_line_x2(my_line, _x2)
// ------------------------
// Drawing Opening range
// ------------------------
f_render_oprange (_show, _session, _is_started, _x1, _x2, _color, _max, _is_extend, _boxes) =>
var int start_time = na
var box my_box = na
top = ta.highest(high, _max)
bottom = ta.lowest(low, _max)
is_crossover = ta.crossover(close, box.get_top(my_box))
is_crossunder = ta.crossunder(close, box.get_bottom(my_box))
if _show
if _is_started
util.clear_boxes(_boxes, math.max(0, i_history_period - 1))
start_time := time
my_box := na
else if _session
time_op = start_time + (i_o_minutes * 60 * 1000)
time_op_delay = time_op - f_get_time_by_bar(1)
if time <= time_op and time > time_op_delay
my_box := box.new(_x1, top, _x2, bottom, border_width=0, bgcolor=color.new(_color, i_o_transp))
array.push(_boxes, my_box)
if _is_extend
box.set_extend(my_box, extend.right)
my_box
else
f_set_box_right(my_box, _x2)
if is_crossover
alert('Price crossed over the opening range', alert.freq_once_per_bar)
if i_alert2_show
label.new(bar_index, box.get_top(my_box), "×", color=color.blue, textcolor=ac.tradingview('blue'), style=label.style_none, size=size.large)
if is_crossunder
alert('Price crossed under the opening range', alert.freq_once_per_bar)
if i_alert2_show
label.new(bar_index, box.get_bottom(my_box), "×", color=color.red, textcolor=ac.tradingview('red'), style=label.style_none, size=size.large)
my_box
// ------------------------
// Drawing candle
// ------------------------
f_render_candle (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _open, _x1, _x2, _boxes, _lines) =>
var box body = na
var line wick1 = na
var line wick2 = na
border_width = i_candle_border_width
cx = math.round(math.avg(_x2, _x1)) - math.round(border_width / 2)
body_color = i_candle_color == option_candle_color2 ? close > _open ? i_candle_color_g : i_candle_color_r : _color
if _show
if _is_started
body := box.new(_x1, _top, _x2, _bottom, body_color, border_width, line.style_solid, bgcolor=color.new(color.black, 100))
wick1 := i_show_candle_wick ? line.new(cx, _top, cx, _top, color=_color, width=border_width, style=line.style_solid) : na
wick2 := i_show_candle_wick ? line.new(cx, _bottom, cx, _bottom, color=_color, width=border_width, style=line.style_solid) : na
array.push(_boxes, body)
array.push(_lines, wick1)
array.push(_lines, wick2)
util.clear_boxes(_boxes, i_history_period)
util.clear_lines(_lines, i_history_period * 2)
else if _session
top = math.max(_open, close)
bottom = math.min(_open, close)
box.set_top(body, top)
box.set_bottom(body, bottom)
box.set_right(body, _x2)
box.set_border_color(body, body_color)
line.set_y1(wick1, _top)
line.set_y2(wick1, top)
f_set_line_x1(wick1, cx)
f_set_line_x2(wick1, cx)
line.set_color(wick1, body_color)
line.set_y1(wick2, _bottom)
line.set_y2(wick2, bottom)
f_set_line_x1(wick2, cx)
f_set_line_x2(wick2, cx)
line.set_color(wick2, body_color)
else if _is_ended
box.set_right(body, bar_index)
// ------------------------
// Rendering limit message
// ------------------------
f_render_limitmessage (_show, _session, _is_started, _is_ended, _x, _y, _rightbars) =>
var label my_note = na
if _show
if _is_started
if _rightbars > max_bars
my_note := label.new(_x, _y, f_message_limit_bars(_rightbars), style=label.style_label_upper_left, color=color.yellow, textalign=text.align_left, yloc=yloc.price)
else if _session
if _rightbars > max_bars
label.set_y(my_note, _y)
label.set_text(my_note, f_message_limit_bars(_rightbars))
else
label.delete(my_note)
else if _is_ended
label.delete(my_note)
true
// Rendering session
//
f_render_sessionrange (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _x1, _x2, _is_extend, _lines) =>
var line above_line = na
var line below_line = na
if _show
if _is_started
above_line := line.new(_x1, _top, _x2, _top, width=i_sess_border_width, style=i_sess_border_style, color=_color)
below_line := line.new(_x1, _bottom, _x2, _bottom, width=i_sess_border_width, style=i_sess_border_style, color=_color)
linefill.new(above_line, below_line, color.new(_color, i_sess_bgopacity))
array.push(_lines, above_line)
array.push(_lines, below_line)
util.clear_lines(_lines, i_history_period * 2)
if _is_extend
line.set_extend(above_line, extend.right)
line.set_extend(below_line, extend.right)
else if _session
line.set_y1(above_line, _top)
line.set_y2(above_line, _top)
line.set_x2(above_line, _x2)
line.set_y1(below_line, _bottom)
line.set_y2(below_line, _bottom)
line.set_x2(below_line, _x2)
true
else if _is_ended
true
true
// ------------------------
// Rendering session box
// ------------------------
f_render_session (_show, _session, _is_started, _is_ended, _color, _top, _bottom, _x1, _x2, _is_extend, _boxes) =>
var box my_box = na
if _show
if _is_started
my_box := box.new(_x1, _top, _x2, _bottom, _color, i_sess_border_width, i_sess_border_style, bgcolor=color.new(_color, i_sess_bgopacity))
array.push(_boxes, my_box)
util.clear_boxes(_boxes, i_history_period)
if _is_extend
box.set_extend(my_box, extend.right)
else if _session
box.set_top(my_box, _top)
box.set_bottom(my_box, _bottom)
f_set_box_right(my_box, _x2)
else if _is_ended
box.set_right(my_box, bar_index)
my_box
// ------------------------
// Drawing market
// ------------------------
f_render_main (_show, _session, _is_started, _is_ended, _color, _top, _bottom) =>
var box my_box = na
var label my_note = na
var x1 = 0
var x2 = 0
var session_open = 0.0
var session_high = 0.0
var session_low = 0.0
x0_1 = ta.valuewhen(na(_session ) and _session, bar_index, 1)
x0_2 = ta.valuewhen(na(_session) and _session , bar_index, 0)
x0_d = math.abs(x0_2 - x0_1)
limit_bars = max_bars
rightbars = x0_d
if _show
if _is_started
x1 := bar_index
x2 := bar_index + (math.min(x0_d, limit_bars))
session_open := open
session_high := _top
session_low := _bottom
else if _session
true_x2 = x1 + x0_d
rightbars := true_x2 - bar_index
limit_bars := bar_index + max_bars
x2 := math.min(true_x2, limit_bars)
session_high := _top
session_low := _bottom
else if _is_ended
session_open := na
// ------------------------
// Drawing
// ------------------------
draw (_show, _session, _color, _label, _extend, _show_fib, _show_op, _lookback, _boxes_session, _lines_session, _boxes_candle_body, _lines_candle_wick, _boxes_op, _lines_fib, _labels) =>
max = f_get_period(_session, 1, _lookback)
top = ta.highest(high, max)
bottom = ta.lowest(low, max)
is_started = f_get_started(_session)
is_ended = f_get_ended(_session)
is_extend = _extend != option_no
= f_render_main(_show, _session, is_started, is_ended, _color, top, bottom)
if i_sess_box_style == 'Box'
f_render_session(_show, _session, is_started, is_ended, _color, top, bottom, x1, x2, is_extend, _boxes_session)
if i_sess_box_style == 'Sandwich'
f_render_sessionrange(_show, _session, is_started, is_ended, _color, top, bottom, x1, x2, is_extend, _lines_session)
if i_show_candle
f_render_candle(_show, _session, is_started, is_ended, _color, top, bottom, _open, x1, x2, _boxes_candle_body, _lines_candle_wick)
if i_label_show
f_render_label(_show, _session, is_started, _color, top, bottom, _label, _labels)
if _show_op
f_render_oprange(_show, _session, is_started, x1, x2, _color, max, is_extend, _boxes_op)
if _show_fib
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.500, 2, line.style_solid, is_extend, _lines_fib)
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.628, i_f_linewidth, i_f_linestyle, is_extend, _lines_fib)
f_render_fibonacci(_show, _session, is_started, x1, x2, _color, top, bottom, 0.382, i_f_linewidth, i_f_linestyle, is_extend, _lines_fib)
util.clear_lines(_lines_fib, i_history_period * 3)
f_render_limitmessage(_show, _session, is_started, is_ended, x1, bottom, _rightbars)
///////////////////
// Calculating
///////////////////
string tz = (i_tz == option_no or i_tz == '') ? na : i_tz
int sess1 = time(timeframe.period, i_sess1, tz)
int sess2 = time(timeframe.period, i_sess2, tz)
int sess3 = time(timeframe.period, i_sess3, tz)
int sess4 = time(timeframe.period, i_sess4, tz)
///////////////////
// Plotting
///////////////////
var sess1_box = array.new()
var sess2_box = array.new()
var sess3_box = array.new()
var sess4_box = array.new()
var sess1_line = array.new()
var sess2_line = array.new()
var sess3_line = array.new()
var sess4_line = array.new()
var sess1_op = array.new()
var sess2_op = array.new()
var sess3_op = array.new()
var sess4_op = array.new()
var sess1_fib = array.new()
var sess2_fib = array.new()
var sess3_fib = array.new()
var sess4_fib = array.new()
var sess1_candle_body = array.new()
var sess2_candle_body = array.new()
var sess3_candle_body = array.new()
var sess4_candle_body = array.new()
var sess1_candle_wick = array.new()
var sess2_candle_wick = array.new()
var sess3_candle_wick = array.new()
var sess4_candle_wick = array.new()
var sess1_labels = array.new()
var sess2_labels = array.new()
var sess3_labels = array.new()
var sess4_labels = array.new()
= draw(i_show_sess1, sess1, i_sess1_color, i_sess1_label, i_sess1_extend, i_sess1_fib, i_sess1_op, i_lookback, sess1_box, sess1_line, sess1_candle_body, sess1_candle_wick, sess1_op, sess1_fib, sess1_labels)
= draw(i_show_sess2, sess2, i_sess2_color, i_sess2_label, i_sess2_extend, i_sess2_fib, i_sess2_op, i_lookback, sess2_box, sess2_line, sess2_candle_body, sess2_candle_wick, sess2_op, sess2_fib, sess2_labels)
= draw(i_show_sess3, sess3, i_sess3_color, i_sess3_label, i_sess3_extend, i_sess3_fib, i_sess3_op, i_lookback, sess3_box, sess3_line, sess3_candle_body, sess3_candle_wick, sess3_op, sess3_fib, sess3_labels)
= draw(i_show_sess4, sess4, i_sess4_color, i_sess4_label, i_sess4_extend, i_sess4_fib, i_sess4_op, i_lookback, sess4_box, sess4_line, sess4_candle_body, sess4_candle_wick, sess4_op, sess4_fib, sess4_labels)
is_positive_bar = close > open
color c_barcolor = na
color c_plotcandle = na
c_sess1_barcolor = (is_sess1) ? (is_positive_bar ? i_sess1_barcolor1 : i_sess1_barcolor2) : na
c_sess2_barcolor = (is_sess2) ? (is_positive_bar ? i_sess2_barcolor1 : i_sess2_barcolor2) : na
c_sess3_barcolor = (is_sess3) ? (is_positive_bar ? i_sess3_barcolor1 : i_sess3_barcolor2) : na
c_sess4_barcolor = (is_sess4) ? (is_positive_bar ? i_sess4_barcolor1 : i_sess4_barcolor2) : na
if (i_sess1_chart != option_chart_x) and is_sess1
c_barcolor := i_sess1_barcolor ? c_sess1_barcolor : na
c_plotcandle := i_sess1_plotcandle ? c_sess1_barcolor : na
if (i_sess2_chart != option_chart_x) and is_sess2
c_barcolor := i_sess2_barcolor ? c_sess2_barcolor : na
c_plotcandle := i_sess2_plotcandle ? c_sess2_barcolor : na
if (i_sess3_chart != option_chart_x) and is_sess3
c_barcolor := i_sess3_barcolor ? c_sess3_barcolor : na
c_plotcandle := i_sess3_plotcandle ? c_sess3_barcolor : na
if (i_sess4_chart != option_chart_x) and is_sess4
c_barcolor := i_sess4_barcolor ? c_sess4_barcolor : na
c_plotcandle := i_sess4_plotcandle ? c_sess4_barcolor : na
barcolor(c_barcolor)
plotcandle(open, high, low, close, color=is_positive_bar ? color_none : c_plotcandle, bordercolor=c_plotcandle, wickcolor=c_plotcandle)
////////////////////
// Alerts
////////////////////
// Session alerts
sess1_started = is_sess1 and not is_sess1 , sess1_ended = not is_sess1 and is_sess1
sess2_started = is_sess2 and not is_sess2 , sess2_ended = not is_sess2 and is_sess2
sess3_started = is_sess3 and not is_sess3 , sess3_ended = not is_sess3 and is_sess3
sess4_started = is_sess4 and not is_sess4 , sess4_ended = not is_sess4 and is_sess4
alertcondition(sess1_started, 'Session #1 started')
alertcondition(sess1_ended, 'Session #1 ended')
alertcondition(sess2_started, 'Session #2 started')
alertcondition(sess2_ended, 'Session #2 ended')
alertcondition(sess3_started, 'Session #3 started')
alertcondition(sess3_ended, 'Session #3 ended')
alertcondition(sess4_started, 'Session #4 started')
alertcondition(sess4_ended, 'Session #4 ended')
alertcondition((not is_sess1) and ta.crossover(close, sess1_high), 'Session #1 High crossed (after session closed)')
alertcondition((not is_sess1) and ta.crossunder(close, sess1_low), 'Session #1 Low crossed (after session closed)')
alertcondition((not is_sess2) and ta.crossover(close, sess2_high), 'Session #2 High crossed (after session closed)')
alertcondition((not is_sess2) and ta.crossunder(close, sess2_low), 'Session #2 Low crossed (after session closed)')
alertcondition((not is_sess3) and ta.crossover(close, sess3_high), 'Session #3 High crossed (after session closed)')
alertcondition((not is_sess3) and ta.crossunder(close, sess3_low), 'Session #3 Low crossed (after session closed)')
alertcondition((not is_sess4) and ta.crossover(close, sess4_high), 'Session #4 High crossed (after session closed)')
alertcondition((not is_sess4) and ta.crossunder(close, sess4_low), 'Session #4 Low crossed (after session closed)')
// Alerts visualized
if i_alert1_show
if i_show_sess1
if sess1_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess1_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess1_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess1_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess2
if sess2_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess2_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess2_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess2_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess3
if sess3_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess3_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess3_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess3_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if i_show_sess4
if sess4_started
label.new(bar_index, close, 'Start', yloc=yloc.abovebar, color=i_sess4_color, textcolor=color_text, size=size.small, style=label.style_label_down)
if sess4_ended
label.new(bar_index, close, 'End' , yloc=yloc.abovebar, color=i_sess4_color, textcolor=color_text, size=size.small, style=label.style_label_down)
plot(i_alert3_show ? sess1_high : na, 'sess1_high', style=plot.style_linebr, color=i_sess1_color)
plot(i_alert3_show ? sess1_low : na, 'sess1_low' , style=plot.style_linebr, color=i_sess1_color, linewidth=2)
plot(i_alert3_show ? sess2_high : na, 'sess2_high', style=plot.style_linebr, color=i_sess2_color)
plot(i_alert3_show ? sess2_low : na, 'sess2_low' , style=plot.style_linebr, color=i_sess2_color, linewidth=2)
plot(i_alert3_show ? sess3_high : na, 'sess3_high', style=plot.style_linebr, color=i_sess3_color)
plot(i_alert3_show ? sess3_low : na, 'sess3_low' , style=plot.style_linebr, color=i_sess3_color, linewidth=2)
plot(i_alert3_show ? sess4_high : na, 'sess4_high', style=plot.style_linebr, color=i_sess4_color)
plot(i_alert3_show ? sess4_low : na, 'sess4_low' , style=plot.style_linebr, color=i_sess4_color, linewidth=2)
plotshape(i_alert3_show and (not is_sess1) and ta.crossover(close, sess1_high) ? sess1_high : na, 'cross sess1_high', color=i_sess1_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess1) and ta.crossunder(close, sess1_low) ? sess1_low : na, 'cross sess1_low', color=i_sess1_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess2) and ta.crossover(close, sess2_high) ? sess2_high : na, 'cross sess2_high', color=i_sess2_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess2) and ta.crossunder(close, sess2_low) ? sess2_low : na, 'cross sess2_low', color=i_sess2_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess3) and ta.crossover(close, sess3_high) ? sess3_high : na, 'cross sess3_high', color=i_sess3_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess3) and ta.crossunder(close, sess3_low) ? sess3_low : na, 'cross sess3_low', color=i_sess3_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess4) and ta.crossover(close, sess4_high) ? sess4_high : na, 'cross sess4_high', color=i_sess4_color, style=shape.triangleup, location=location.absolute, size=size.tiny)
plotshape(i_alert3_show and (not is_sess4) and ta.crossunder(close, sess4_low) ? sess4_low : na, 'cross sess4_low', color=i_sess4_color, style=shape.triangledown, location=location.absolute, size=size.tiny)
Moving Average Adaptive RSI [BackQuant]Moving Average Adaptive RSI
What this is
A momentum oscillator that reshapes classic RSI into a zero-centered column plot and makes it adaptive. It builds RSI from two parts:
• A sensitivity window that scans several recent bars to capture the strongest up and down impulses.
• A selectable moving average that smooths those impulses before computing RSI.
The output ranges roughly from −100 to +100 with 0 as the midline, with optional extra smoothing and built-in divergence detection.
How it works
Impulse extraction
• For each bar the script inspects the last rsi_sen bars and collects upward and downward price changes versus the current price.
• It keeps the maximum upward change and maximum downward change from that window, emphasizing true bursts over single-bar noise.
MA-based averaging
• The up and down impulse series are averaged with your chosen MA over rsi_len bars.
• Supported MA types: SMA, EMA, DEMA, WMA, HMA, SMMA (RMA), TEMA.
Zero-centered RSI transform
• RS = UpMA ÷ DownMA, then mapped to a symmetric scale: 100 − 200 ÷ (1 + RS) .
• Above 0 implies positive momentum bias. Below 0 implies negative momentum bias.
Optional extra smoothing
• A second smoothing pass can be applied to the final oscillator using smoothing_len and smooth_type . Toggle with “Use Extra Smoothing”.
Visual encoding
• The oscillator is drawn as columns around the zero line with a gradient that intensifies toward extremes.
• Static bands mark 80 to 100 and −80 to −100 for extreme conditions.
Key inputs and what they change
• Price Source : input series for momentum.
• Calculation Period (rsi_len) : primary averaging window on up and down components. Higher = smoother, slower.
• Sensitivity (rsi_sen) : how many recent bars are scanned to find max impulses. Higher = more responsive to bursts.
• Calculation Type (ma_type) : MA family that shapes the core behavior. HMA or DEMA is faster, SMA or SMMA is slower.
• Smoothing Type and Length : optional second pass to calm noise on the final output.
• UI toggles : show or hide the oscillator, candle painting, and extreme bands.
Reading the oscillator
• Midline cross up (0) : momentum bias turning positive.
• Midline cross down (0) : momentum bias turning negative.
• Positive territory :
– 0 to 40: constructive but not stretched.
– 40 to 80: strong momentum, continuation more likely.
– Above 80: extreme risk of mean reversion grows.
• Negative territory : mirror the same levels for the downside.
Divergence detection
The script plots four divergence types using pivot highs and lows on both price and the oscillator. Lookbacks are set by lbL and lbR .
• Regular bullish : price lower low, oscillator higher low. Possible downside exhaustion.
• Hidden bullish : price higher low, oscillator lower low. Bias to trend continuation up.
• Regular bearish : price higher high, oscillator lower high. Possible upside exhaustion.
• Hidden bearish : price lower high, oscillator higher high. Bias to trend continuation down.
Labels: ℝ for regular, ℍ for hidden. Green for bullish, red for bearish.
Candle coloring
• Optional bar painting: green when the oscillator is above 0, red when below 0. This is for visual scanning only.
Strengths
• Adaptive sensitivity via a rolling impulse window that responds to genuine bursts.
• Configurable MA core so you can match responsiveness to the instrument.
• Zero-centered scale for simple regime reads with 0 as a clear bias line.
• Built-in regular and hidden divergence mapping.
• Flexible across symbols and timeframes once tuned.
Limitations and cautions
• Trends can remain extended. Treat extremes as context rather than automatic reversal signals.
• Divergence quality depends on pivot lookbacks. Short lookbacks give more signals with more noise. Long lookbacks reduce noise but add lag.
• Double smoothing can delay zero-line transitions. Balance smoothness and timeliness.
Practical usage ideas
• Regime filter : only take long setups from your separate method when the oscillator is above 0, shorts when below 0.
• Pullback confirmation : in uptrends, look for dips that hold above 0 or turn up from 0 to 40. Reverse for downtrends.
• Divergence as a heads-up : wait for a zero-line cross or a price trigger before acting on divergence.
• Sensitivity tuning : start with rsi_sen 2 to 5 on faster timeframes, increase slightly on slower charts.
Alerts
• MA-A RSI Long : oscillator crosses above 0.
• MA-A RSI Short : oscillator crosses below 0.
Use these as bias or timing aids, not standalone trade commands.
Settings quick reference
• Calculation : Price Source, Calculation Type, Calculation Period, Sensitivity.
• Smoothing : Smoothing Type, Smoothing Length, Use Extra Smoothing.
• UI : Show Oscillator, Paint Candles, Show Static High and Low Levels.
• Divergences : Pivot Lookback Left and Right, Div Signal Length, Show Detected Divergences.
Final thoughts
This tool reframes RSI by extracting strong short-term impulses and averaging them with a moving-average model of your choice, then presenting a zero-centered output for clear regime reads. Pair it with your structure, risk and execution process, and tune sensitivity and smoothing to the market you trade.
Infinite EMA with Alpha Control♾️ Infinite EMA with Alpha Control
What Makes This EMA "Infinite"?
Unlike traditional EMA indicators that are limited to typical periods (1-5000), this Infinite EMA breaks all boundaries. You can create EMAs with periods of 1,000, 10,000, or even 1,000,000 bars - that's why it's called "infinite"! Also Infinite EMA starts working immediately from the very first bar on your chart
Why This EMA is "Infinite":
1. Mathematically: When N → ∞, alpha → 0, meaning infinitely long "memory"
2. Practically: You can set any period - even 100,000 bars
3. Flexibility: Alpha allows precise control over the "forgetting speed"
How Does It Work?
The magic lies in the Alpha parameter. While regular EMAs use fixed formulas, this indicator gives you direct control over the EMA's "memory" through Alpha values:
• High Alpha (0.1-0.2): Fast reaction, short memory
• Medium Alpha (0.01-0.05): Balanced response
• Low Alpha (0.0001-0.001): Extremely slow reaction, very long memory
• Ultra-low Alpha (0.000001): Almost frozen in time
The Mathematical Formula:
Alpha = 2 / (Period + 1)
This means you can achieve any EMA period by adjusting Alpha, giving you infinite flexibility!
Expanded "Infinite EMA" Table:
Period EMA (N) - Alpha (Rounded) - Alpha (Exact) - Description
10 - 0.1818 - 0.181818... - Fast EMA
20 - 0.0952 - 0.095238... - Short-term
50 - 0.0392 - 0.039215... - Medium-term
100 - 0.0198 - 0.019801... - Long-term
200 - 0.0100 - 0.009950... - Standard long-term
500 - 0.0040 - 0.003996... - Very long-term
1,000 - 0.0020 - 0.001998... - Super long-term
2,000 - 0.0010 - 0.000999... - Ultra long-term
5,000 - 0.0004 - 0.000399... - Mega long-term
10,000 - 0.0002 - 0.000199... - Giga long-term
25,000 - 0.00008 - 0.000079... - Century-scale EMA
50,000 - 0.00004 - 0.000039... - Practically motionless
100,000 - 0.00002 - 0.000019... - "Glacial" EMA
500,000 - 0.000004 - 0.000003... - Geological timescale
1,000,000 - 0.000002 - 0.000001... - Approaching constant
5,000,000 - 0.0000004 - 0.0000003... - Virtually static
10,000,000 - 0.0000002 - 0.0000001... - Nearly flat line
100,000,000 - 0.00000002 - 0.00000001... - Mathematical infinity
Formula: Alpha = 2/(N+1) where N is the EMA period
Key Features:
Dual EMA System: Run fast and slow EMAs simultaneously
Crossover Signals: Automatic buy/sell signals with customizable alerts
Alpha Control: Direct mathematical control over EMA behavior
Infinite Periods: From 1 to 100,000,000+ bars
Visual Customization: Colors, fills, backgrounds, signal sizes
Instant Start: Works accurately from the very first bar
Update Intervals: Control calculation frequency for noise reduction
Why Choose Infinite EMA?
1. Unlimited Flexibility: Any period you can imagine
2. Mathematical Precision: Direct alpha control for exact behavior
3. Professional Grade: Suitable for all trading styles
4. Easy to Use: Simple settings with powerful results
5. No Warm-up Period: Accurate values from bar #1
Simple Explanation:
Think of EMA as a "memory system":
• High Alpha = Short memory (forgets quickly, reacts fast)
• Low Alpha = Long memory (remembers everything, moves slowly)
With Infinite EMA, you can set the "memory length" to anything from seconds to centuries!
⚡ Instant Start Feature - EMA from First Bar
Immediate Calculation from Bar #1
Unlike traditional EMA indicators that require a "warm-up period" of N bars before showing accurate values, Infinite EMA starts working immediately from the very first bar on your chart.
How It Works:
Traditional EMA Problem:
• Standard 200-period EMA: Needs 200+ bars to become accurate
• First 200 bars: Shows incorrect/unstable values
• Result: Large portions of historical data are unusable
Infinite EMA Solution:
Bar #1: EMA = Current Price (perfect starting point)
Bar #2: EMA = Alpha × Price + (1-Alpha) × Previous EMA
Bar #3: EMA = Alpha × Price + (1-Alpha) × Previous EMA
...and so on
Key Benefits:
No Warm-up Period: Start trading signals from day one
Full Chart Coverage: Every bar has a valid EMA value
Historical Accuracy: Backtesting works on entire dataset
New Markets: Works perfectly on newly listed assets
Short Datasets: Effective even with limited historical data
Practical Impact:
Scenario Traditional EMA Infinite EMA
New cryptocurrency Unusable for first 200 days ✅ Works from day 1
Limited data (< 200 bars) Inaccurate values ✅ Fully functional
Backtesting Must skip first 200 bars ✅ Test entire history
Real-time trading Wait for stabilization ✅ Trade immediately
Technical Implementation:
if barstate.isfirst
EMA := currentPrice // Perfect initialization
else
EMA := alpha × currentPrice + (1-alpha) × previousEMA
This smart initialization ensures mathematical accuracy from the very first calculation, eliminating the traditional EMA "ramp-up" problem.
Why This Matters:
For Backesters: Use 100% of available data
For Live Trading: Get signals immediately on any timeframe
For Researchers: Analyze complete datasets without gaps
Bottom Line: Infinite EMA is ready to work the moment you add it to your chart - no waiting, no warm-up, no exceptions!
Unlike traditional EMAs that require a "warm-up period" of 200+ bars before showing accurate values, Infinite EMA starts working immediately from bar #1.
This breakthrough eliminates the common problem where the first portion of your chart shows unreliable EMA data. Whether you're analyzing a newly listed cryptocurrency, working with limited historical data, or backtesting strategies, every single bar provides mathematically accurate EMA values.
No more waiting periods, no more unusable data sections - just instant, reliable trend analysis from the moment you apply the indicator to any chart.
🔄 Update Interval Bars Feature
The Update Interval feature allows you to control how frequently the EMA recalculates, providing flexible noise filtering without changing the core mathematics.
Set to 1 for standard behavior (updates every bar), or increase to 5-10 for smoother signals that update less frequently. Higher intervals reduce market noise and false signals but introduce slightly more lag. This is particularly useful on volatile timeframes where you want the EMA's directional bias without every minor price fluctuation affecting the calculation.
Perfect for swing traders who prefer cleaner, more stable trend lines over hyper-responsive indicators.
Conclusion
The Infinite EMA transforms the traditional EMA from a fixed-period tool into a precision instrument with unlimited flexibility. By understanding the Alpha-Period relationship, traders can create custom EMAs that perfectly match their trading style, timeframe, and market conditions.
The "infinite" nature comes from the ability to set any period imaginable - from ultra-fast 2-bar EMAs to glacially slow 10-million-bar EMAs, all controlled through a single Alpha parameter.
________________________________________
Whether you're a beginner looking for simple trend following or a professional researcher analyzing century-long patterns, Infinite EMA adapts to your needs. The power of infinite periods is now in your hands! 🚀
Go forward to the horizon. When you reach it, a new one will open up.
- J. P. Morgan
Impulse Convexity Trend Gate [T1][T69]OVERVIEW 🧭
• A price-only trend engine that opens a “gate” only when trend strength, acceleration, and impulse dominance align.
• Built from three cooperating parts: adaptive slope, directional convexity, and an impulse-vs-pullback ratio.
• Output is a bounded oscillator (−100…+100) plus side-specific gate states (bull/bear), with optional pullback and weakness highlights.
THE IDEA & USEFULNESS 🧪
• Not a simple mashup: each component plays a distinct role—slope for direction, convexity for acceleration agreement, and an impulse ratio to suppress correction noise.
• Adaptive EMA length (series-based) lets the midline adjust to conditions without external indicators.
• Approximation of hyperbolic tangent and clamp keep signals bounded and stable while avoiding library dependencies.
• Designed to help trend traders act only when continuation is likely, and stand down during pullbacks or chop.
HOW IT WORKS (PIPELINE) ⚙️
• Price transform
• Uses log price for scale stability.
• Adaptive midline
• Volatility-aware EMA length is clamped between minimum and maximum, then applied via a custom recursive EMA.
• Slope & convexity
• Slope (first difference of the midline) defines direction; convexity (second difference) verifies acceleration agrees with that direction.
• Impulse vs pullback ratio (R)
• Sums directional progress versus counter-direction pullbacks over a window; requires impulse to dominate.
• Normalization & score
• Slope and convexity are normalized by recent dispersion; combined into a raw score and squashed to −100…+100 using manual tanh.
• Trend gate
• Gate opens only when: R ≥ threshold, |normalized slope| ≥ threshold, and slope/convexity share the same sign.
• States & visuals
• Bull/Bear Gate Entry when gate is open, oscillator crosses ±15 in the correct direction, price is on the correct side of the midline, and slope/convexity agree.
• Pullbacks mark counter-moves while a gate is active; Weakness flags specific fade patterns after pullbacks.
FEATURES ✨
• Bull and Bear Gate Entries (green/red columns).
• Pullback shading and optional trend-weakness highlights (yellow/orange + teal/maroon).
• Background tint reflects the active side (bull or bear).
• Pure price logic; no volume or external filters required.
HOW TO USE 🎯
• Regime filter
• Trade only in the direction of the open gate; ignore signals when the gate is closed.
• Pullback entries
• During an open gate, wait for a pullback zone, then act on trend-resumption (e.g., oscillator re-push through ±15 or structure break in gate direction).
• Exits & risk
• Consider trimming when the oscillator relaxes toward 0 while the gate remains open, or when convexity flips against slope and R deteriorates.
• Timeframes & markets
• Suited for trend following on crypto/FX/indices from M30 to 4H/1D; raise thresholds on lower timeframes to reduce noise.
CONFIGURATION 🔧
• Impulse ratio gate (R ≥): raises/lowers the standard for continuation dominance.
• Slope strength gate (|sN| ≥): controls how strong a slope must be to count.
• Show Pullback Impulse (toggle): enable/disable pullback highlights.
• Show Trend Weakness (toggle): enable/disable weakness flags.
LIMITATIONS ⚠️
• As a trend tool, it can lag at regime transitions; expect whipsaws in tight ranges.
• Parameters are instrument- and timeframe-dependent; tune thresholds before live use.
• Pullback/weakness flags are contextual—not trade signals by themselves; use them with gate state and your execution rules.
ADVANCED TIPS 🛠️
• Tighten R and slope thresholds for lower timeframes; loosen for higher timeframes.
• Pair with NNFX-style money management and pair-level filters; let the gate be the confirmation layer, not the entry trigger by itself.
• Batch-test across 100+ symbols, export metrics, and run Monte Carlo to validate LLN reliability and Sharpe/IQR stability.
• For system hedging, disable entries when both sides trigger on the same asset to avoid internal conflict.
NOTES 📝
• Price-only construction reduces data-vendor differences and keeps behavior consistent across markets.
• Manual tanh/clamp ensure stable, bounded scores even during extremes.
DISCLAIMER 🛡️
• For research and education. No financial advice. Test thoroughly, size conservatively, and respect your risk rules.
Stock Profit Calculator — Live Mode
## Overview
This Pine Script indicator calculates, in real time, the financial impact of a stock trade, including purchase/sale commissions, capital gains tax (CGT), and return on investment (ROI). It displays a compact table with key values and also calculates the breakeven price to see at what level the net P/L returns to zero.
---
## Inputs and customization
- **Number of shares:** `shares` defines the purchased quantity.
- **Purchase price:** `buyPrice` is the unit cost; the total purchase is calculated from this.
- **Live selling price:** `sellPrice = close` uses the last bar’s price for live valuation.
- **Fixed or percentage commissions:** `useFixedComm` selects the model.
- **Fixed:** `buyCommFixed`, `sellCommFixed`.
- **Percentage:** `buyCommPct`, `sellCommPct` (applied to notional value).
- **CGT rate:** `cgtRate` is the percentage rate, applied only in case of profit.
- **Table position:** `tablePosition` with predefined options.
- **Visual style:** `colTxt`, `colPos`, `colNeg`, `colBg`, `colHdr`, `colFrame` for text color, positive/negative P/L, background, header, and borders.
> Tip: if your broker uses minimum fees or composite fees, turn on “Use fixed commissions?” and enter the two fixed fees; otherwise, use the percentage model.
---
## Calculation logic
#### Purchase costs
- **Total purchase:**
\
- **Purchase commission:**
\
- **Net entry cost:**
\
#### Sale revenues
- **Total sale (with live price):**
\
- **Sale commission:**
\
- **Net exit revenue:**
\
#### P/L and taxes
- **Gross P/L:**
\
- **CGT (only on positive P/L):**
\
- **Net P/L:**
\
#### ROI
- **Percentage ROI on invested capital:**
\
#### Breakeven
- **Gross breakeven** shown in the table: the unit price that makes the net P/L exactly zero, including purchase cost and an estimate of the sale commission.
\
In the script, if commissions are fixed it adds the fixed sale fee; if percentage-based, the sale component is not included in this row (conservative approximation).
- **Breakeven with tax** (calculated but not shown):
\
Useful when you want the post-CGT result to be exactly zero. Not displayed in the table but ready for use.
> Note: CGT applies only on positive profits; near breakeven, the tax effect is null or only kicks in beyond a threshold. That’s why the script distinguishes between the “gross” and “with tax” versions.
---
## On-screen table
- **Displayed rows:**
- **Purchase:** total net entry cost (with commissions).
- **Sale:** total net exit revenue (with commissions).
- **Gross P/L:** difference between netSell and netBuy.
- **CGT:** estimated tax only if there’s a gain.
- **Net P/L:** P/L after taxes.
- **ROI (%):** percentage return on netBuy.
- **Breakeven:** gross unit breakeven price.
- **Conditional colors:**
- **P/L and ROI:** green for ≥ 0, red for < 0.
- **Headers and cells:** customizable via the color inputs.
- **Efficient refresh:** the table updates only on the last bar via `barstate.islast` to avoid unnecessary redraws.
---
## Behavior and performance
- **Overlay:** displayed on the price chart.
- **Persistent variable:** table is created once with `var table`.
- **Live price:** `sellPrice` follows the current `close`, making P/L, ROI, and breakeven dynamic.
---
## Limitations and suggestions
- **Commission model:** when using percentage commissions, the breakeven in the table doesn’t add the sale percentage fee in the “breakevenPrice” formula. For more precision, you could solve the equation including the percentage fee on exit.
- **Breakeven with tax:** `breakevenWithTax` is a linear estimate; near zero profit, tax may be null. You might choose to display it instead of, or alongside, the gross breakeven.
- **Precision and formatting:** values are shown with `format.mintick`. If the symbol has very small ticks, consider a custom format for better readability.
- **Edge cases:** ROI is undefined if `netBuy = 0` (unlikely in practice but good to note).
> Pro tip: if you want to show the breakeven with tax, add a “Breakeven (post-CGT)” row printing `breakevenWithTax`. If you prefer a single row, replace the shown value with the post-CGT one.
---
