Empiece

Medias móviles

Deepsage1m + Tradingview15m Screener Combo (Shorts)The Deepsage Consensus Screener — Short is a 1-minute trend and momentum indicator built specifically for identifying short (sell) opportunities during bearish market conditions. It uses the same weighted multi-indicator scoring engine (EMA, SMA, Ichimoku, MACD, RSI, ADX, volatility, volume, OBV, and VWAP) combined with a strict 15-minute consensus filter. Short signals are generated only when the most recent confirmed 15-minute consensus state is SELL, ensuring trades align with higher-timeframe bearish momentum.
Indicador Pine Script®
por andreasapelseth
Trendfilter Clouds + VWAP (M/Y) + Swing-VWAP + MTF Tages-EMAsEMA Clouds with VWAPs (Advanced Trend & Zone Filter) This indicator is a visual trend and trading-zone framework built around EMA clouds, anchored VWAPs, and higher-timeframe EMAs. It is designed to highlight high-probability trading zones, not to generate signals or orders. What it does Defines trend direction and structure Highlights hot reaction zones for scalps and pullbacks Provides objective mean-reversion areas via VWAP Adds rebound EMAs for secondary trade opportunities Everything is shown directly on the price chart with reduced visual noise. Core Trading Zones 1. EMA Cloud Zones (Primary Trade Areas) Fast EMA Cloud (8 / 16) → Scalp zone → Very short-term pullbacks and momentum reactions → Best used in strong trends Slow EMA Cloud (15 / 30) → Main scalp & continuation zone → Higher-quality reactions than 8/16 → Core area for trend-following trades These EMA zones represent heated areas where price often reacts quickly. Trades are typically taken inside or just at the edge of the cloud, not far away from it. 2. Swing-Anchored VWAP (Mean & Reversal Zone) Anchored automatically to: Last swing low in bullish trends Last swing high in bearish trends Acts as the active mean price of the current trend leg How it’s used: Price moves away from VWAP → wait Price returns to VWAP → watch for rejection or reversal Trades are taken only after confirmation, never blindly VWAP is a reaction level, not an entry trigger. 3. Rebound EMAs (Secondary Trades) Higher EMAs (e.g. 150 / 200) act as rebound zones Used for: Deeper pullbacks Exhaustion moves Late-session or final retracements These are secondary opportunities, often taken after the main move has already played out. Higher-Timeframe Context Daily EMAs (10 / 20) Shown weakly to avoid clutter Used to: Confirm higher-timeframe trend Filter counter-trend scalps Judge overall market pressure They are context only, not scalp entries. Monthly & Yearly VWAP (Optional) Disabled by default Can be enabled manually when needed Used to identify: Major long-term levels Extreme deviations Structural support / resistance How to trade it (practical) Trend direction → Defined by the slow EMA cloud (15/30) Scalps → Inside 8/16 or 15/30 zones → In trend direction only VWAP trades → Wait for price to reach VWAP → Trade rejection / reversal, not the touch Rebound trades → At higher EMAs (150/200) → Only with clear exhaustion or structure No trade → Price inside cloud with no direction → Conflicting EMA and VWAP context Customization & Display Toggle: EMA clouds Swing-VWAP Monthly / Yearly VWAP Daily EMAs Adjustable: EMA lengths VWAP visibility Line thickness and opacity Single-pane overlay. No external libraries. Visual filter only. Limitations Not predictive Requires confirmation and market context High-impact news can temporarily invalidate zones
Indicador Pine Script®
por PrimeEdge
TEMA vs WMA Retest & Crossover Alerts TEMA vs WMA — Retest & Crossover Alerts (with visible label) TEMA vs WMA is a clean, momentum + trend-bias overlay built for traders who like simple, repeatable structure: trend confirmation + pullback (retest) entries, with optional trend-flip alerts when momentum shifts. It’s especially useful for: Trend traders looking to buy pullbacks / sell rallies Scalpers & intraday traders who want quick bias + retest triggers Swing traders who want a “stay on the right side” filter with clear flips Anyone who prefers minimal indicators and alert-driven execution What it does This script plots two moving averages on your chart: WMA (default 26): acts like a dynamic support/resistance “mean” TEMA (default 26): a faster, smoother momentum line that reacts quicker than standard EMAs The relationship between the two defines your bias: Bullish bias: TEMA is above WMA Bearish bias: TEMA is below WMA To make the bias obvious at a glance: Both lines change color depending on bias A soft fill appears between the lines (bullish/bearish/neutral) Optional bar coloring input is included (for future expansion), while the current version focuses on coloring the averages and fill. Signals & alerts included This indicator is built around two core ideas: retests and crossovers. ✅ Retest Alerts (entry-style trigger) A “retest” happens when price touches the WMA (with an optional tolerance buffer). BUY Retest: bullish bias (TEMA > WMA) and price retests WMA SELL Retest: bearish bias (TEMA < WMA) and price retests WMA These are great for “trend continuation” setups: wait for trend bias → enter on pullback to WMA. ⚡ Trend Flip Alerts (bias shift) Bullish Flip: TEMA crosses above WMA Bearish Flip: TEMA crosses below WMA These are useful for spotting momentum reversals or confirming a new trend phase. Visual label (on-chart confirmation) When a retest occurs (and labels are enabled), the script prints a small “Retest” label at the WMA level to make it easy to spot retest events while backtesting. Customization WMA Length / TEMA Length: adjust for faster (shorter) or smoother (longer) behavior Touch Buffer: adds price tolerance so “near touches” count as retests (helpful on high-volatility assets) Show last-bar status label: toggle retest labels on/off How traders typically use it Trade with bias (bull = look long, bear = look short) Wait for a WMA retest to avoid chasing Use the trend flip alerts to avoid fighting reversals Combine with your favorite confirmation (volume, structure, HTF trend, support/resistance) Note: This is an alert + structure tool, not a full trading system. Always manage risk and consider market context (range vs trend, news volatility, session timing).
Indicador Pine Script®
por Brian_Heady
EMA Trend with 21 Pullback entriesEMA Trend with 21 Pullback Entries This indicator visualizes a multi-timeframe EMA stack (9, 21, 50, 200 periods) to identify the prevailing trend direction and highlights potential pullback entries toward the 21-period EMA when the trend is intact. Key features: • Background coloring indicates full EMA alignment: darker green for bullish stack (9 > 21 > 50 > 200), darker red for bearish. • Lighter background tints show pullback zones where price has retraced to/near the 21 EMA while the overall trend remains aligned. • Entry signals (green triangle up for long, red triangle down for short) appear only when: - Price crosses back over/under the 21 EMA (bounce confirmation), - The 21 EMA is sloping in the trade direction (momentum filter), - The full EMA stack confirms the trend. • Exit signals (small x-cross) trigger on a close crossing back through the 21 EMA against the prior trend bar — useful as a basic trailing exit or warning. How it works (concept): The system combines trend filtering (stacked EMAs for hierarchy) with classic pullback trading: in an uptrend, wait for price to dip toward support (21 EMA), then enter on recovery with momentum confirmation. The reverse applies in downtrends. This reduces entries against the dominant trend and filters out many ranging-market whipsaws. Usage tips: - Best suited for trending markets on higher timeframes (1H, 4H, Daily recommended; lower TFs often produce more noise/false signals). - Trade only in the direction of the strong background color. - Use entry triangles as alert triggers or visual cues — combine with your own risk management (stops below recent lows for longs, etc.). - Exits are conservative; you may prefer to hold until trend breaks (e.g., EMA50 cross) or use trailing methods. Limitations & notes: - Like all EMA-based systems, it lags in choppy/range-bound conditions and can produce false signals during low-volatility periods or sharp reversals. - No volume, volatility, or additional filters are included — consider adding RSI, volume confirmation, or support/resistance manually. - This is a visual aid and filtering tool only — not financial advice, no performance guarantees. Always back test thoroughly on your assets/timeframes and use proper position sizing. Open-source under default Mozilla Public License 2.0. Feel free to study, modify, or build upon it while respecting Trading View's reuse guidelines.
Indicador Pine Script®
por D4V3YZ
EMAs & SMAs Suite (5+5) + Cluster AlertWhat this script does This indicator combines 5 Exponential Moving Averages (EMAs) and 5 Simple Moving Averages (SMAs) into a single, clean overlay. Each moving average can be individually configured with its own visibility, length, color, line width, and visual style (Line / Step / Dots). An optional value label can display the current values of all enabled EMAs and SMAs on the last bar. Key feature — Cluster Alert (noise-reduced) Beyond plotting moving averages, the script includes a single-trigger cluster alert designed to reduce alert spam. The logic monitors the behavior of SMA(10) relative to a short-term EMA cluster: Bullish signal: when SMA(10) enters above both EMA(9) and EMA(21) Bearish signal: when SMA(10) enters below both EMA(9) and EMA(21) The alert is triggered only on the first bar that enters the new state, not on every candle that remains above or below the cluster. This makes it suitable for identifying momentum resumption, trend continuation, or early weakness, without repetitive signals. How to use Enable or disable the EMAs and SMAs you want to display. Adjust periods, colors, widths, and styles according to your chart preferences. (Optional) Enable “Confirm signals only on bar close” to avoid intrabar alerts. Create an alert in TradingView using “Any alert() function call” to receive detailed messages. (Optional) Enable “Show signal markers on chart” to visualize Bull/Bear entries. Visual styles note The available styles (Line / Step / Dots) reflect the actual rendering modes supported by plot() in Pine Script and are not dashed lines. Intended use This script is designed as a visual and alerting tool to support trend and momentum analysis. It does not replace risk management or a complete trading plan. Disclaimer This script does not provide investment advice. All trading decisions and risk management remain the responsibility of the user.
Indicador Pine Script®
por EugenioTheDog
Futures Trend SignalerWhat this indicator is Futures Trend Signaler is a compact trend/bias dashboard built for futures (and any liquid symbol) that combines: EMA trend alignment (EMA9 vs EMA21), and Micro price positioning versus a higher‑timeframe EMA (e.g., 15s and 1s price relative to the 1m EMA9), plus crossover markers on the chart to timestamp regime shifts. It’s designed to answer, in seconds: “Is the market in a bullish or bearish EMA structure?” “Are the lower timeframes aligned with the higher timeframe?” “When was the most recent bull/bear crossover?” What it shows (table) The table includes: 1m EMA9 vs EMA21 State: EMA9 > EMA21 / EMA9 < EMA21 / neutral Bias: Bullish / Bearish / Neutral “Last cross” context (so you know what the most recent regime shift was) 15s EMA9 vs EMA21 Same state/bias logic as the 1m row 1s EMA9 vs EMA21 Same state/bias logic as the 1m row 15s Price vs 1m EMA9 Shows whether micro price is above or below the 1m EMA9 1s Price vs 1m EMA9 Same, but even more “micro” This structure gives you a quick “stacked timeframe” view: 1m EMA structure = your baseline regime, 15s/1s EMA structure = your momentum alignment, 15s/1s price vs 1m EMA9 = your immediate pressure/positioning vs the baseline. What it plots (crossover markers) For each EMA crossover set (1m, 15s, 1s), the script plots: Bull cross marker (arrow up) Bear cross marker (arrow down) To keep the chart clean: It keeps only the most recent bull cross and most recent bear cross per tracked timeframe. When a new bull/bear cross happens, the prior marker of that same type/timeframe is removed. Markers are differentiated by: Color and/or a mini label on the marker (e.g., “1m”, “15s”, “1s”), so you can instantly tell which timeframe produced the signal. Inputs / customization Typical controls include: Show/hide table Table position + text size Lower‑timeframe selections (so you can change 15s/1s if your symbol or plan doesn’t support seconds data) Optional marker sizing / visibility settings (if you decide to expose them) Recommended usage Use the 1m EMA9/EMA21 as your baseline bias filter. Use 15s & 1s EMA alignment to confirm momentum is in agreement before entries. Use 15s/1s price vs 1m EMA9 as a quick “pressure” check (continuation vs mean‑reversion risk). Use the most recent crossover markers to avoid trading into a fresh regime change without confirmation. Limitations / notes Seconds‑based signals require seconds data availability for your symbol/account. If not supported, switch those inputs to a higher LTF (e.g., 1m / 5m). Because the indicator uses multi‑timeframe data, responsiveness can depend on your current chart timeframe and how often TradingView updates each series. Disclaimer This indicator is for educational/informational purposes only and does not constitute trading or investment advice. Futures trading involves substantial risk and can result in significant losses. Always manage risk and follow your plan.
Indicador Pine Script®
por babaflargslugdook
EMA Fractal Bias"EMA Fractal Bias" overlays on TradingView charts to detect directional bias for scalping on futures like NQ/ES. It computes three smoothed EMAs (fast 3/2, mid 9/3, slow 20/5, configurable) for stacking checks (bullish: fast > mid > slow; bearish: reverse). Williams Fractals (period 2 default) identify potential breaks: close above up-fractal high for long, below down-fractal low for short. Bias logic: Tracks last up/down fractal. On break, if stacked aligns, sets bias (long/short) and resets broken fractal. If no stack, sets pending flag and neutral bias; confirms on later bars if stack turns true. Shading teal for long, purple for short, orange for neutral, with intra-bar previews. Debug toggle adds event labels and status on last bar. Non-repainting, evaluates on close.
Indicador Pine Script®
por ChannelFisher
Leswin Stocks Ribbon Signals (SPY/QQQ) Leswin Ribbon Signals – Day Trading Indicator (Stocks & Crypto) Leswin Ribbon Signals is a trend-based momentum indicator designed for day traders and scalpers who trade stocks, ETFs, options, and crypto. Built for fast execution on 5m, 15m, and 1H timeframes, it uses a dynamic EMA ribbon, trend filtering, and volatility conditions to help identify high-probability BUY and SELL zones while avoiding low-quality chop. Features: • Trend-following EMA ribbon • Automatic higher-timeframe trend filter • Smart BUY & SELL signals • Volatility (ATR) filter to avoid dead zones • Regular Trading Hours (RTH) filter for stocks • Optimized for SPY, QQQ, DIA, IWM, TSLA, AAPL, META • Works on crypto, forex, and futures • Mobile-friendly • Non-repainting logic This indicator is best used as a confirmation tool, not a standalone system. Always combine with your own levels, structure, and risk management.
Indicador Pine Script®
por leswin_trades
Bit Secure - Index Structure Engine (V1.0) # 💎 Bit Secure – Index Structure Engine (Final Stable) ### *Professional Structure Trading Engine for Serious Traders* **Bit Secure – Index Structure Engine** is a **high-performance institutional-style trading system** built for traders who demand **precision, structure, and control** — not random signals. This is a **premium-grade execution engine**, designed to convert raw market data into **clean structure-based trading decisions** using a powerful blend of: > EMA Structure • VWAP Logic • Session Control • Noise Filtering • Rule-Based Execution --- ## 🧠 What Makes It Premium? Unlike basic indicators that flood charts with signals, this system focuses on **quality over quantity**: ✔ Controlled trade frequency ✔ Institutional-style logic ✔ Structure-first execution ✔ Smart session timing ✔ Noise suppression ✔ Professional risk alignment ✔ Modular system design ✔ Rule-based discipline --- ## 🔥 Premium Feature Set ### 📊 Multi-Layer EMA Structure System * EMA 5 → Momentum trigger * EMA 9 → Market flow * EMA 21 → Trend backbone Used for: * Direction bias * Retest entries * Trend continuation * Structure validation * Reversal filtering --- ### 🎯 CORE STRUCTURE SIGNALS (9–21) **Professional trend execution model** * Stable entries * Clean structure signals * Intraday optimized * High reliability setups Signals: * BUY CORE * SELL CORE --- ### ⚡ FAST EXECUTION MODE (5–21) **High-speed scalping engine** * Early entries * Momentum capture * Aggressive mode for active traders * Optional execution layer > Controlled via: `Enable FAST EMA 5-21` --- ### 🕘 PRIORITY OPENING SESSION ENGINE (Elite Feature) **Institutional-style market open model** * Active only on **5-min timeframe** * Works between **09:15 – 09:45** * One high-quality trade per day * Retest + crossover structure logic * Overtrading prevention system * Daily trade lock mechanism > Toggle: `Enable PRIORITY Opening Entry` --- ### 📉 VWAP NOISE FILTER (Smart Money Filter) **Advanced congestion detection** * VWAP proximity blocking * Range-based filter logic * Avoids chop zones * Eliminates sideways noise * Filters fake breakouts * Improves win-rate quality > Adjustable: `VWAP Block Range (Points)` > Toggle: `Enable VWAP Noise Filter` --- ## 🧩 Professional Modular Control Customize your trading style: ✅ Enable/Disable FAST mode ✅ Enable/Disable PRIORITY trades ✅ Enable/Disable VWAP filter ✅ Choose Priority EMA (EMA 9 / EMA 21) ✅ Adjust VWAP block zone ➡️ Fully adaptive to your trading personality --- ## 🎯 Best Market Applications ✔ Index Trading (NIFTY / BANKNIFTY / FINNIFTY) ✔ Intraday Trading ✔ Scalping ✔ Futures Trading ✔ Options Trading ✔ Structure Trading ✔ Momentum Trading ✔ Rule-Based Systems ✔ Professional Trading Models --- ## 🏆 Who This Is For This indicator is for traders who: ✔ Want structure, not clutter ✔ Follow rules, not emotions ✔ Trade systems, not tips ✔ Believe in process ✔ Want consistency over excitement ✔ Think long-term, not jackpot ✔ Build discipline ✔ Respect risk management --- ## ⚠️ Professional Disclaimer This is a **decision-support trading engine**, not a profit guarantee system. Designed for traders who practice: * Risk management * Position sizing * Discipline * Psychology control * Backtesting * Forward testing * Process-driven execution --- ## 🔐 Brand Promise **Bit Secure Trading Systems** = > Structure • Safety • Strategy • Stability • Sustainability • Success --- ## 🧬 Premium Brand Line **Bit Secure – Index Structure Engine** > Trade like a system. Not like a signal hunter.
Indicador Pine Script®
por devh697
DRW Daily EMAs on IntradayDaily EMA — Higher-Timeframe Anchor & Mean Reference Purpose The Daily EMA serves as a higher-timeframe anchor that defines the dominant mean and directional bias of the market. It is designed to provide structure, balance, and context, not frequent signals. This EMA represents where price is expected to respond when larger participants engage. --- Why the Daily EMA Matters The daily timeframe captures: Institutional inventory positioning Swing-level risk management zones Mean reversion and trend continuation behavior Because of this, the Daily EMA often acts as: Support during uptrends Resistance during downtrends A pivot zone during balance and transition phases --- How to Use the Daily EMA The Daily EMA is best used as a context filter, not an entry trigger. Common interpretations: Above Daily EMA → bullish structural bias Below Daily EMA → bearish structural bias Repeated reactions at the EMA → balance / accumulation / distribution When combined with lower-timeframe wave logic, it helps determine whether setups are: With trend (higher probability) Counter-trend (require confirmation) Occurring in mean-reversion conditions --- Best Timeframes Designed to be plotted on intraday charts Especially effective on 5-minute to 30-minute charts Acts as a constant reference regardless of intraday volatility --- What This EMA Is NOT ❌ Not a crossover system ❌ Not a scalping signal ❌ Not a predictive indicator It does not attempt to forecast direction — it defines where the market is relative to its higher-timeframe mean. --- Design & Performance Uses higher-timeframe data safely via request.security Non-repainting Lightweight and stable for continuous intraday use --- Summary The Daily EMA answers one core question: “Are we trading above, below, or around the higher-timeframe mean?” Used properly, it keeps traders aligned with structure rather than noise.
Indicador Pine Script®
por ryanmuhl
DRW MultiTF MeansDRW MTF EMA Framework — Higher-Timeframe Structure for Lower-Timeframe Execution Purpose & Originality This indicator provides a fixed multi-timeframe EMA structure designed specifically for traders executing on lower timeframes (5–15 minute charts) who need consistent higher-timeframe context without constantly switching charts. Rather than offering adjustable or overlapping EMA combinations, this script uses a deliberately curated EMA set that mirrors how institutional traders anchor intraday decisions to higher-timeframe structure. --- What the Script Plots The script calculates and plots the following higher-timeframe EMAs directly onto the current chart: 8 EMA from the 15-minute timeframe – short-term execution bias 21 EMA from the 30-minute timeframe – core intraday trend path 50 EMA from the 60-minute timeframe – higher-timeframe mean / swing filter 5 EMA from the Daily timeframe – macro directional anchor These EMAs are always active and intentionally fixed to keep the framework consistent across instruments and sessions. --- How the EMAs Work Together Each EMA serves a specific structural role, not redundancy: The 15m 8 EMA reflects near-term pressure and momentum shifts. The 30m 21 EMA acts as the primary intraday trend guide. The 60m 50 EMA functions as a higher-timeframe equilibrium zone. The Daily 5 EMA defines broader directional bias and mean-reversion risk. When multiple higher-timeframe EMAs align, continuation setups tend to perform better. When price chops between them, conditions are typically rotational or corrective. --- How to Use This Framework Recommended workflow (5m–15m charts): Favor longs when price holds above the 30m 21 EMA and respects the 60m 50 EMA. Favor shorts when price stays below those same anchors. Expect mean reversion or hesitation near the 60m 50 EMA or Daily 5 EMA. Treat EMA stacking (all aligned) as confirmation, not prediction. This tool is best used as a context filter, not a standalone entry system. --- Best Timeframes Designed for 5-minute to 15-minute execution charts Can be viewed on higher timeframes, but its intent is to project HTF structure onto LTF execution --- What This Script Is NOT ❌ Not a crossover system ❌ Not a signal generator ❌ Not a “best EMA” optimizer It provides structure, bias, and reference points so traders can make better decisions around timing and risk. --- Chart & Performance Notes Uses TradingView’s native multi-timeframe data requests No excessive drawing objects or repainting logic Optimized to remain stable on intraday charts
Indicador Pine Script®
por ryanmuhl
1M Weighted Deepsage ScreenerThis indicator applies the same core decision logic used by Deepsage AI to determine real-time market consensus on lower timeframes. It combines multiple market dimensions into a single weighted score and classifies conditions as Strong Buy, Buy, Neutral, Sell, or Strong Sell. All calculations are performed on the current chart timeframe (typically 1-minute), making the indicator highly responsive and well-suited for scalping and short-term market analysis. Its purpose is not precise entries, but to reveal what the majority of signals are aligned with at any given moment.
Indicador Pine Script®
por andreasapelseth
7 Wonder Moving Average [DR Trade]Moving Averages are easy-to-learn indicators for beginners. We provide seven moving average indicators that can be customized to suit each trader's needs. We also offer a selection of moving averages: the Simple Moving Average, the Exponential Moving Average, and the Hull Moving Average. We provide the Hull Moving Average for traders to more accurately identify trends and potential reversals. The HMA is more responsive to recent price changes than the SMA or EMA, while still maintaining a smooth trendline. The HMA was first introduced by Alan Hull to address the lag and noise of traditional moving averages (MAs). The best way to use the HMA indicator is to use a 100-period indicator on the H1 timeframe. The other six indicators can be customized by each trader. Thank you.
Indicador Pine Script®
por deddyrinaldo
5EMA + Volume Spikes + Ultra Fast Scalp V3Description This indicator combines 5 EMAs, volume spike detection, and an ultra-fast scalping system designed for short-term trading. The scalping logic uses a fixed + ATR hybrid price deviation, filtered by RSI and CCI to capture extreme overbought/oversold conditions while avoiding overheated zones. It also includes previous day levels (high, low, body high/low) extended into the current session for clear intraday reference. Optimized for fast scalping and momentum fades on lower timeframes.
Indicador Pine Script®
por masato19810122
ZION Trend Strike [wjdtks255]🚀 ZION Trend Strike This is an advanced trend-following signal indicator designed to work in perfect harmony with the ZION Momentum Flow. It filters market noise and provides precise entry/exit points based on momentum synergy. Key Features: Trend Strike Signals: Provides clear BUY/SELL labels when price action aligns with momentum energy. Dynamic Trend Guide: A color-switching EMA line that helps you visualize the current trend direction at a glance. Synergy Optimization: Best used as a set with ZION Momentum Flow to avoid false breakouts. Multilingual Input: Easy-to-use settings menu with both English and Korean labels.
Indicador Pine Script®
por wjdtks255