BAJO

Bedaiwi's Smart Pivots Bedaiwi's Smart Pivots is a three-level market-structure indicator that classifies price turning points as Minor, Intermediate, and Major highs and lows. HOW IT WORKS Minor Pivots A Minor High is confirmed when the middle bar of a three-bar formation has a high that is strictly higher than the highs immediately before and after it. A Minor Low is confirmed when the middle bar has a low that is strictly lower than the lows immediately before and after it. Equal highs and equal lows are not treated as Minor pivots. Intermediate Pivots Intermediate pivots are derived from confirmed sequences of Minor pivots. An Intermediate High is identified when a higher Minor High is followed by a lower Minor High. An Intermediate Low is identified when a lower Minor Low is followed by a higher Minor Low. Major Pivots Major pivots apply the same hierarchical logic to confirmed Intermediate pivots. A Major High is identified when a higher Intermediate High is followed by a lower Intermediate High. A Major Low is identified when a lower Intermediate Low is followed by a higher Intermediate Low. SYMBOLS AND COLORS - Red diamond: Intermediate High - Green diamond: Intermediate Low - Red exclamation mark: Major High - Green exclamation mark: Major Low Optional Minor pivots use the same High and Low color settings. When the replacement option is enabled, an Intermediate symbol is removed and replaced with an exclamation mark if the same point is later promoted to Major status. HISTORICAL PLOTTING AND CONFIRMATION DELAY Pivot identification requires subsequent price information. A Minor pivot is confirmed only after the following bar closes. Intermediate and Major pivots require additional confirmed pivot sequences, so their confirmation occurs later. After confirmation, the indicator places the symbol on the historical bar where the relevant high or low occurred. Therefore, a symbol displayed on an earlier bar was not necessarily available in real time on that bar. Historical placement is used only to show the actual location of the confirmed turning point. It should not be interpreted as a signal that was known on the historical pivot bar. SETTINGS Users can: - Show or hide Minor pivots - Show or hide Intermediate pivots - Show or hide Major pivots - Replace an Intermediate symbol when it becomes a Major pivot - Customize High and Low pivot colors PRACTICAL USE Smart Pivots can help users: - Study market structure - Identify significant historical swing highs and lows - Separate short-term fluctuations from higher-level price structure - Review possible support and resistance areas - Add context to discretionary price-action analysis LIMITATIONS Smart Pivots is an analytical indicator. It does not place trading orders and does not define entries, exits, stop-loss levels, profit targets, position sizing, or expected returns. Pivot confirmation is delayed by design because later price action is required. Results may vary between symbols, timeframes, sessions, and data feeds. The indicator does not identify final market tops or bottoms with certainty. Historical observations do not guarantee future market behavior. This script is provided for research and educational purposes only. It is not financial or investment advice.

Indicador

High/Low Resistance Liquidity Description Not all liquidity pools are created equal. The market behaves very differently when attacking a clean, pristine target versus when it is grinding through jagged, already-swept price action. The High/Low Resistance Liquidity indicator is an automated structural mapping engine that programmatically identifies and categorizes liquidity pools into Low Resistance (LRLR) and High Resistance (HRLR) targets in real-time. 🎯 What is LRLR and HRLR? LRLR (Low Resistance Liquidity Run): These are "clean" targets. When stops are perfectly clustered at the exact same price, it creates a massive, unobstructed magnetic pull for price. When price attacks these areas, it displaces quickly and aggressively. HRLR (High Resistance Liquidity Run): These are "dirty" or swept targets. If a pivot high has already swept a previous high and rejected (a false breakout or sweep), the liquidity resting there was already purged. Price will struggle, chop, and overlap heavily if it attempts to push back into that isolated zone. ✨ Key Features Automated Target Detection: The indicator maps structural highs and lows using customizable left/right bar pivot confirmations, and immediately evaluates their relationship to the previous market structure. EQH/EQL Detection (LRLR): If a new structural pivot forms within a tight tick threshold of the previous pivot, it validates them as Equal Highs or Equal Lows. A solid, highly visible line is drawn forward, marking a pristine Low Resistance target. Swept Pivot Detection (HRLR): If a new pivot extends past the old pivot and reverses, it validates a sweep. A dotted warning line is drawn forward, marking a High Resistance target where price is likely to struggle. Real-Time Mitigation: The script actively monitors price action. The exact moment a future candle wicks or closes through an active liquidity line, the line stops extending and its label updates to "Mitigated", keeping your charts completely free of historical clutter. Standard Liquidity Toggle: Choose whether you only want to see explicit LRLR/HRLR targets, or if you want to also track all standard, unmitigated intermediate pivots in the background. ⚙️ Settings Pivot Strength: Fully customize how many bars are required left and right to confirm a major structural point. EQH/EQL Tolerance (Ticks): You dictate exactly how tight the price must align to be considered "Equal". (e.g., 5-10 ticks on lower timeframes, or expand it for Daily charts). Display Settings: Toggle the visibility of Standard Unmitigated Pivots, turn text labels on or off, and fully customize the line colors to fit your exact chart aesthetic.

Indicador

High / Low Resistance Liquidity Trend Description This indicator is a powerful, algorithmic tool designed for HRLR methodologies. It removes the subjectivity of identifying High Resistance Liquidity Runs (HRLR) and Low Resistance Liquidity Runs (LRLR) by dynamically mapping out the structural flow of liquidity on your chart using clean, point-to-point trendlines. 🎯 Core Concepts In this methodology, understanding whether price will face "resistance" when drawing to a liquidity pool is critical for trade management: Low Resistance Liquidity (LRLR): Clean, engineered liquidity. When price fails to sweep a previous structural extreme, it leaves behind smooth, resting stop-losses. This acts as a frictionless magnet for price. High Resistance Liquidity (HRLR): Swept liquidity. When price violently takes out a previous extreme and reverses, it purges the local stop-losses. Returning to this level is a "High Resistance" run because the liquidity fuel has already been burned. ⚙️ How It Works The script evaluates price action in real-time, detecting structural Pivot Highs and Pivot Lows. It then dynamically draws trendlines connecting adjacent pivots to reveal the underlying liquidity texture: 🟢 LRLR (Green Lines) - Failed Sweeps: Highs: Connects a Pivot High to a subsequent Lower High. Lows: Connects a Pivot Low to a subsequent Higher Low. Signal: Clean trendline liquidity is building. Expect a fast, low-resistance run through this level. 🔴 HRLR (Red Lines) - Liquidity Sweeps: Highs: Connects a Pivot High to a subsequent Higher High. Lows: Connects a Pivot Low to a subsequent Lower Low. Signal: A Turtle Soup / Sweep has occurred. Price may struggle to break this extreme cleanly. ✨ Visual Polish This indicator is built with extreme attention to aesthetic detail. Rather than messy labels cluttering the wicks, the text (LRLR / HRLR) is mathematically positioned at the exact midpoint of the connecting trendlines. It features a custom Label Masking engine that dynamically cuts out the line exactly where the text sits, providing a stunning, ultra-clean look. (Note: Use the 'Chart Background Color' setting to ensure the label mask matches your specific TradingView theme). 🔧 Settings Pivot Left/Right Bars: Fully customize the structural lookback to define exactly what constitutes a valid swing high/low for your timeframe. Visual Customization: Full control over colors and text labels. Chart Background Mask: Allows you to swap the label cutout color between Light Mode and Dark Mode backgrounds flawlessly.

Indicador

All-Time High/Low Fibonacci Retracement (with Flip)Tired of manually dragging the Fibonacci tool across macro charts every time an asset makes a new high or low? This indicator automates the entire process. It scans the absolute historical data of any asset to identify its true All-Time High (ATH) and All-Time Low (ATL), then dynamically projects standard Fibonacci retracement levels between them. Whether you are analyzing a stock's decades-long macro cycle or looking for major historical support and resistance levels, this script keeps your charts perfectly anchored without the manual clutter. Key Features 100% Automated Tracking: Uses historical state variables (var) to lock onto the ultimate lowest and highest prices ever printed on your current chart. Real-Time Dynamic Updates: If the asset breaks out into price discovery (new ATH) or capitulates to a new bottom (new ATL), the script recalculates and shifts all Fibonacci lines instantly. One-Click Flip Toggle: Built-in calculation flip. Measure retracements from the top down (bearish retracement) or flip it from the bottom up (bullish expansion) right from the settings menu. Clean Visuals: Hard-coded with classic Fibonacci ratios (23.6%, 38.2%, 50.0%, 61.8%, 78.6%) using a subtle, non-intrusive color gradient that won't crowd your daily price action. How to Use the Settings Flip Retracement (Checkbox): * Unchecked (Default): Places 0% at the All-Time High and 100% at the All-Time Low (Ideal for finding support levels during a pullback from macro highs). Checked: Places 0% at the All-Time Low and 100% at the All-Time High (Ideal for tracking major resistance levels and targets on the way back up). 💡 Pro-Tip: Because TradingView loads a limited number of historical bars on lower timeframes (like 5-minute or 15-minute charts), always load this indicator on a Daily (D), Weekly (W), or Monthly (M) chart first. This ensures the script catches the true historical inception highs and lows of the asset!

Indicador

Level Range Scanner-Watchlist Level Range Scanner — Watchlist See how price is progressing toward your key levels across an entire watchlist at a glance. No more flipping between 18 charts wondering how much further a stock has to go before it tags premarket or prior-day levels — this scanner draws a live progress bar for every level on every symbol, so you can instantly see what's coiled and about to break. WHAT IT DOES Track up to 20 symbols in a single on-chart table. For each ticker it monitors four critical intraday levels and shows you, with a filling progress bar, exactly how close price is to breaking each one: - PDH — Previous Day High - PDL — Previous Day Low - PMH — Premarket High - PML — Premarket Low When price has room to run, you see a partially filled bar (more fill = closer to the level). The moment a level breaks, the bar flips to a green dot (high broken) or red dot (low broken) so confirmed breaks jump out instantly. HOW TO USE IT 1. Add the indicator to any intraday chart (1m–15m works best — it needs intraday data for premarket levels). 2. Open settings and type your tickers into Symbol 01–20. Leave slots blank to hide them. 3. Watch the table. Bars filling toward the top of a range = building pressure toward a breakout; bars filling toward the bottom = pressure toward a breakdown. 4. Set an alert (see below) and let it watch the list for you. READING THE COLUMNS - Ticker / Price / Volume — Symbol, last price, and accumulated session volume (auto-formatted K/M/B). - % Change — Move vs. the prior close — green up, red down. - PDH / PDL Break — Progress bar from the opposite level toward the prior-day high/low. Green/red dot on break. - PMH / PML Break — Same idea, for the premarket high/low. - Trend — Up arrow = price broke BOTH PDH and PMH (bullish trend established). Down arrow = broke BOTH PDL and PML (bearish). Warning icon = mixed / not yet confirmed. The Trend column is the headline signal: an up or down arrow means a symbol has cleared both its daily AND premarket level in the same direction — a higher-conviction continuation setup than a single-level poke. ALERTS Use "LE Scanner Triggered." It fires whenever any watched symbol breaks both its premarket and prior-day level in the same direction (i.e. flips to an up or down arrow). Add it once and the scanner watches all 20 names for you in the background. SETTINGS - Table Size / Position — fit it anywhere on your layout. - Show Empty Rows — keep or hide blank symbol slots. NOTES - Levels are calculated using extended-hours data (premarket/after-hours included), so PDH/PDL reflect the full trading day, not regular session only. - Requires an intraday timeframe for the premarket columns to populate. - Best on liquid stocks/ETFs where premarket and prior-day levels carry weight.

Indicador

por YakoCollins

XRS Session Highs & Lows XRS Session Highs & Lows is a clean session-liquidity indicator designed to mark key highs and lows from major trading sessions and higher-timeframe reference levels. This tool plots and labels: • Asia session high and low • London session high and low • New York session high and low • Previous day high and low • Weekly high and low • Monthly high and low • All-time high and all-time low The script is built for traders who use liquidity, session ranges, prior highs/lows, and auction-market structure as part of their analysis. It helps identify obvious liquidity pools, sweep zones, breakout levels, and potential reaction areas without needing to manually mark every session. Key features include: • Custom session times • Custom timezone selection • Optional text labels and price labels • Global color controls for simplified chart styling • Auto-simplification on higher timeframes to reduce clutter • Optional line extension • Smart label positioning based on visible chart range • Automatic combining of labels when multiple levels overlap at the same price This indicator is useful for traders who track liquidity raids, session sweeps, failed auctions, previous-day levels, weekly/monthly extremes, and major market structure levels. This script does not provide buy or sell signals. It is intended as a visual market-structure and liquidity-mapping tool. Disclaimer: This script is for educational and informational purposes only and does not constitute financial advice. Trading involves risk. Use at your own discretion.

Indicador

Elaris Auto Trend Fibonacci Pro Elaris Auto Trend Fibonacci Pro Overview Elaris Auto Trend Fibonacci Pro is an advanced market structure and Fibonacci analysis tool designed to automatically identify directional trends, detect significant swing points, and project professional-grade Fibonacci retracement and extension levels directly on the chart. Unlike manual Fibonacci drawing tools that require traders to constantly adjust anchor points, this indicator continuously analyzes confirmed swing structure and automatically maps the most relevant Fibonacci framework based on the current market trend. The goal is to help traders quickly identify potential pullback zones, trend continuation areas, profit targets, and key reaction levels without manually redrawing Fibonacci levels throughout the trading session. --- How The Indicator Works 1. Swing Structure Detection The indicator first identifies confirmed swing highs and swing lows using a configurable pivot confirmation algorithm. A swing is only considered valid after confirmation, which helps eliminate many false or premature swing points that often appear during volatile market conditions. The minimum swing size can also be filtered using ATR-based validation, ensuring that insignificant market fluctuations are ignored. --- 2. Trend Identification After detecting valid market structure, the indicator determines the dominant directional trend. Bullish trends are identified when recent confirmed swing lows lead into higher confirmed swing highs. Bearish trends are identified when recent confirmed swing highs lead into lower confirmed swing lows. An optional EMA trend filter can be enabled to require alignment between price structure and moving average direction. This additional layer helps reduce counter-trend Fibonacci projections. --- 3. Automatic Fibonacci Mapping Once a valid trend is detected, Fibonacci levels are automatically projected between the most relevant confirmed swing points. The indicator plots: • 0.236 Retracement • 0.382 Retracement • 0.500 Midpoint • 0.618 Golden Ratio • 0.786 Deep Retracement • 1.000 Retracement These levels represent areas where pullbacks, reactions, trend continuations, or reversals may occur. --- 4. Golden Zone Highlighting The area between the 50% and 61.8% retracement levels is automatically highlighted as the Golden Zone. Many traders monitor this region because it often represents an area where institutional participants may re-enter an existing trend after a pullback. The highlighted zone provides a quick visual reference for potential trend continuation opportunities. --- 5. Extension Targets The indicator can optionally project Fibonacci extension levels beyond the current trend. Available extension targets include: • 1.272 Extension • 1.618 Extension • 2.000 Extension These levels can be used as potential profit-taking areas, trend continuation objectives, or future reaction zones. --- 6. Trend Dashboard A built-in dashboard provides real-time information including: • Current trend direction • Swing strength relative to ATR • Fibonacci anchor direction • Golden zone status • Indicator operating mode The dashboard helps traders evaluate current market conditions without needing additional analysis tools. --- How To Use Trend Continuation 1. Wait for a confirmed bullish or bearish trend. 2. Allow price to retrace toward the highlighted Fibonacci levels. 3. Monitor the Golden Zone for potential continuation setups. 4. Use extension levels as potential target areas. Pullback Analysis The 38.2%, 50%, and 61.8% retracement levels can help identify areas where temporary corrections may end and the primary trend may resume. Target Projection The Fibonacci extensions can be used to estimate possible future trend objectives after a successful continuation move. --- Important Notes • The indicator uses confirmed swing points and does not rely on future-looking calculations after confirmation. • Fibonacci levels automatically update when a new confirmed market structure is established. • The indicator is designed for trending markets and may generate fewer meaningful projections during prolonged ranging conditions. • This tool is intended for technical analysis and should not be used as a standalone trading system. --- Best Markets The indicator can be applied to: • Cryptocurrency Markets • Forex Markets • Stock Markets • Index Markets • Commodity Markets It is particularly effective on higher liquidity instruments where market structure tends to be more consistent. --- Best Timeframes Recommended timeframes: • 15 Minutes • 1 Hour • 4 Hours • Daily Higher timeframes generally produce more reliable market structure and Fibonacci projections. --- Alerts The indicator includes alerts for: • Trend direction changes • Golden Zone interactions • Key Fibonacci level breaks These alerts can be integrated into trading workflows for additional monitoring and confirmation. --- Thank you for using Elaris Auto Trend Fibonacci Pro.

Indicador

por ElarisGroup

LVD-Low Volume Candle // Highlight LOW Volume Candle with a Line for Intraday // Low Volume candle will move dynamically

Indicador

por DeepakzGoel

SMC Daily Bias [LuxGonAdn]Overview — what it does and why it works on any timeframe Each method explained (A, B, C, D) — logic, signals, and context On-chart features — table, PDH/PDL lines, background tint Settings summary — quick reference for every input Suggested use — practical trading tips including how to pair it with your OB indicator

Indicador

Weekly Range Break Planner [AGPro Series]# Weekly Range Break Planner 🧠 Core Idea Is the weekly range break strong enough to monitor, or is price likely to fail back inside the range? 📌 Overview / What it does Weekly Range Break Planner is a weekly range decision-support script built to evaluate whether price is breaking beyond the previous week's high or low with enough structural quality. The script maps the previous weekly high, low, and midpoint, detects bullish or bearish breaks, builds a retest shelf around the broken boundary, scores the break from 0 to 100, and summarizes the current state inside a compact AG Pro panel. It does not predict price direction, automate trades, or provide guaranteed signals. It is designed to organize weekly range context, break quality, retest behavior, target room, and invalidation risk into a clean visual workflow. 🎯 Purpose & Design Philosophy Weekly highs and weekly lows are widely watched reference points, but not every break beyond them is meaningful. This script was built for traders who want to separate a clean weekly range break from a weak expansion, failed breakout, or noisy return back into the prior range. The design supports structured observation: range first, break quality second, retest behavior third, and action state last. ⚡ Why This Script Is Different Most tools mark weekly highs and lows or show simple breakout signals. This script does NOT stop at drawing weekly levels. Instead, it evaluates what happens after price breaks the range: whether the break has enough close quality, whether the retest shelf is respected, whether target room remains, and whether the context is still valid. ⚙️ Methodology 1. Previous Weekly Range Mapping 2. Break Boundary Detection 3. Retest Shelf Construction 4. Break Quality Scoring 5. Target Room Evaluation 6. Invalidation And Expiration Handling 7. Panel And Alert Output 🗺️ How to Read the Chart The weekly range box marks the previous week's high-low structure. The high and low rails show the main break boundaries. The midpoint line helps users understand where price is relative to the prior weekly balance. The retest shelf appears around the broken boundary after a weekly range break. READY BREAK labels appear when the break context meets the required score threshold. Target rails show projected continuation references after a qualified break. The panel summarizes Range State, Break Score, Retest, Room, and Action. 🚦 Signals & States • READY → A qualified weekly range break has formed. • MONITOR → Price has broken a weekly boundary and the script is evaluating quality. • WAIT → The previous weekly range is valid, but no active break context is present. • INVALIDATED → Price failed back inside the weekly range after a break. • EXPIRED → The break window closed without a qualified context. • BLOCKED → The previous weekly range is not suitable for evaluation. 🔔 Alerts Logic Bullish Weekly Range Break Ready triggers when price breaks above the previous weekly high with enough quality. Bearish Weekly Range Break Ready triggers when price breaks below the previous weekly low with enough quality. Weekly Range Break Invalidated triggers when price fails back inside the prior weekly range after a break. Weekly Range Break Expired triggers when the evaluation window closes without a qualified break state. Alerts are attention markers, not trade instructions. 🧩 Confluence Logic The break score combines weekly range fit, close distance beyond the boundary, retest shelf behavior, time quality, relative volume, and available target room. When these elements align, the context becomes stronger. When they do not align, the script remains in WAIT, MONITOR, INVALIDATED, EXPIRED, or BLOCKED state. 📊 When to Use • Weekly high and weekly low break analysis • Breakout-retest workflows • Intraday monitoring around prior weekly extremes • Swing context planning • Trend continuation after a range expansion ⚠️ When NOT to Use Avoid relying on this script in extremely low-liquidity markets, very noisy symbols, holiday sessions, or conditions where the previous weekly range is not meaningful. It should not be used as a standalone decision tool without broader market context, risk planning, and independent confirmation. 🎛️ Key Inputs • Minimum Weekly Range filters weak or compressed prior weekly ranges. • Break Buffer ATR controls how far price must close beyond the weekly boundary. • Retest Shelf ATR controls the depth of the shelf around the broken boundary. • Invalidation Buffer ATR controls how far price must close back inside the range before invalidation. • Minimum Ready Score controls how strong the score must be before READY appears. • Target inputs define continuation reference rails from the broken boundary. • Visual settings control boxes, rails, labels, right-side tags, panel location, and font size. 🖥️ Interface & Visual Design The interface is designed to make the weekly range context readable at a glance. The chart shows the prior weekly range, the active break boundary, the retest shelf, and target-room references without turning the screen into a generic breakout overlay. The AG Pro panel gives compact decision context while preserving chart visibility. 🧪 Practical Usage Workflow 1. Check whether the previous weekly range is valid. 2. Watch for a close beyond the weekly high or low. 3. Observe the retest shelf around the broken boundary. 4. Read the break score, retest state, and room value. 5. Treat READY as an attention state and confirm with broader market context. 🔍 Interpretation Guidelines A higher break score means the weekly range break is cleaner according to the script logic. A clean retest shelf response can strengthen the context. Low remaining room means the move may already be extended relative to the projected target. READY means the context deserves attention, not that price must continue. 🚫 What This Script Is NOT This script is not a prediction engine. It is not financial advice. It is not an auto-trading system. It does not provide guaranteed signals. It does not replace risk management or independent analysis. ⚠️ Limitations & Transparency Weekly range behavior changes across markets, timeframes, volatility regimes, and liquidity conditions. The score is rule-based and depends on current chart timeframe, ATR normalization, volume behavior, and the previous weekly range. Different symbols may require different sensitivity settings. 🧠 Market Context Notes Weekly range breaks can be more meaningful when aligned with trend, liquidity response, volume participation, and clean retest behavior. Breaks that quickly return inside the prior weekly range often need extra caution. 🔐 Non-Promise Statement No script can guarantee future price behavior. This tool provides structured visual context only. 📉 Risk Disclosure Trading involves risk. Users remain responsible for their own decisions. This script is for educational and analytical purposes only and does not provide financial advice or guaranteed trading outcomes.

Indicador

Effort vs Result Reaction Map [AGPro Series]Effort vs Result Reaction Map ⚖️ OVERVIEW Effort vs Result Reaction Map is a premium volume-price reaction indicator built around one of the most practical ideas from Wyckoff and Volume Spread Analysis: effort only matters when it is compared with result. Many volume tools stop at identifying high volume, relative volume spikes, wide candles or bullish/bearish pressure. This script goes further by asking a more selective question: Is the market actually getting progress for the effort being spent? The indicator compares normalized participation effort, ATR-adjusted price progress, close-location quality, directional efficiency and wick behavior. The output is a clean reaction map that highlights two specific event families: • High effort + poor result • Low effort + strong result That makes the script different from a simple volume spike detector, a generic pressure map, a support/resistance drawer or a full Wyckoff phase tool. It is focused on the moment where participation and progress become meaningfully disconnected. 🔬 CORE IDEA Effort is built from two dimensions: • Relative volume versus a rolling participation baseline • Candle spread normalized by ATR Result is built from: • Price progress over a configurable number of bars • Close-location quality in the direction of progress • ATR-normalized movement quality Efficiency measures the relationship between those two sides. A bar can show strong volume, but if price does not achieve directional progress, the script treats that as a potential failed-progress reaction. A bar can also move cleanly with surprisingly low effort, which can reveal ease of movement and directional acceptance. 🧭 WHAT MAKES IT DIFFERENT Most public volume indicators answer one of these questions: • Is volume high? • Is relative volume expanding? • Is price near a volume shelf? • Is pressure bullish or bearish? • Is a Wyckoff phase forming? Effort vs Result Reaction Map answers a narrower and more actionable chart-reading question: Did the market receive enough result for the effort it spent? This keeps the tool focused and prevents it from overlapping with broader volume profile, relative volume, delta, session reaction or support/resistance scripts. It does not try to label accumulation, distribution, spring, upthrust or phase structure. Instead, it turns effort/result imbalance into a compact reaction framework that can sit cleanly on any chart. 🎯 SIGNAL TYPES High Effort + Poor Result This event appears when participation and spread are unusually active but price progress remains weak. The script studies wick behavior and candle direction to estimate which side attempted progress and failed. The label then expresses the opposite reaction bias: • Failed Bull Progress • Failed Bear Progress Low Effort + Strong Result This event appears when price makes strong directional progress while effort remains unusually light. This can suggest ease of movement, cleaner directional travel or a lack of opposing participation in that moment: • Low Effort Rise • Low Effort Drop Each event must pass a confidence threshold and a visual cooldown before it appears on the chart. This keeps the output selective and suitable for publication-quality screenshots. 🟦 REACTION BOXES The script can draw rectangular reaction boxes around qualified events. These boxes are not generic support and resistance zones. They are event-native reaction ranges created only when the effort/result engine finds a meaningful imbalance. Reaction boxes help the user track whether the market later respects, revisits or ignores the area where effort and result became disconnected. The box length, padding, transparency and minimum confidence are configurable. This gives the chart more structure without turning the indicator into another broad zone tool. 📊 PANEL The compact panel reports: • Effort • Result • Efficiency • Reaction Bias • Confidence The first panel row follows the AGPro standard format: one merged blue header row containing only the script name. Panel location, panel theme and panel font size are all configurable from the settings. ⚙️ KEY SETTINGS Engine • Effort Baseline Length controls the volume normalization baseline. • ATR Normalization Length controls spread, progress and object spacing. • Result Progress Bars defines how far back the result comparison looks. • Volume Weight In Effort balances relative volume versus candle spread. Reaction Thresholds • High Effort Threshold defines unusual participation. • Low Effort Threshold defines unusually light participation. • Poor Result Threshold filters failed-progress events. • Strong Result Threshold filters low-effort strong-result events. • Minimum Event Confidence controls final event selectivity. • Visual Cooldown Bars keeps labels and boxes from clustering. Reaction Boxes • Box Minimum Confidence keeps boxes more selective than labels if desired. • Box Extend Right Bars controls how long reaction ranges remain visible. • Box ATR Padding gives boxes a clean margin around the event candle. • Box Transparency controls chart softness. Labels And Markers • Event labels can be enabled or disabled. • Label confidence can be shown or hidden; it is hidden by default for cleaner screenshots. • Label font size defaults to Normal. • Label offset uses ATR so labels stay away from candle bodies. • Directional markers provide a minimal visual cue for qualified reactions. 🧠 HOW TO USE Apply the script to a liquid market and start with the default settings. Watch for high-effort poor-result labels when volume and spread expand but the market fails to make clean progress. These areas can be useful for studying absorption, failed pushes and short-term reaction shifts. Watch for low-effort strong-result labels when price moves cleanly without requiring heavy participation. These events can help identify easier directional travel and cleaner movement conditions. Use the reaction boxes as context zones created by the event itself. They are best read together with structure, trend context, liquidity areas, session behavior or your own discretionary framework. ✅ BEST USE CASES • Spotting failed directional progress after heavy participation • Comparing volume effort with actual price result • Identifying clean movement when result expands on lighter effort • Studying short-term absorption and efficiency shifts • Adding Wyckoff/VSA-inspired logic without using a full phase detector • Keeping a premium chart layout with selective labels and contextual boxes 🧩 LIMITATIONS AND TRANSPARENCY Effort vs Result Reaction Map is an analytical indicator, not a strategy. It does not classify full Wyckoff phases, does not draw generic support/resistance, and does not attempt to forecast future price. Its purpose is to organize observed effort/result behavior into a clean visual framework. Event quality depends on symbol behavior, timeframe, volume reliability and selected thresholds. Markets with unreliable volume data may need more conservative settings. The script is designed to be selective by default, but users can tune thresholds, confidence, cooldown, label size, panel theme and reaction box visibility to match their preferred chart style.

Indicador

Low Volume Pullback Zones [AGPro Series]Low Volume Pullback Zones 🔷 Overview Low Volume Pullback Zones is a trend-continuation overlay built for one very specific market behavior: a trend is already established, price retraces in a controlled way, volume dries up during that retracement, and the market later reclaims a continuation trigger. The default profile is tuned for daily swing charts, where low-volume retracements usually form cleaner structural pockets and the chart has enough space for the boxes to read properly. A 4H Active preset is included for traders who want more frequent mapping, while Custom mode exposes the raw controls. Many pullback tools focus only on price touching a moving average, a SuperTrend line, or a generic support/resistance area. This script is intentionally narrower. It looks for the quieter part of a trend: the moment where participation contracts during a retracement, the pullback stays shallow relative to the prior impulse, and a clean continuation pocket can be mapped with a visible invalidation boundary. The goal is not to mark every trend candle. The goal is to isolate the cleaner pauses inside trend conditions where the pullback behaves like controlled absorption instead of aggressive reversal pressure. 🟩 What The Script Detects The engine combines five layers: 1. Trend Side The script first checks whether the market has a clean bullish or bearish trend profile using EMA alignment, EMA slope, DI direction, and ADX strength. If the trend is flat or mixed, the script avoids mapping low-quality pullbacks. 2. Low RVOL Retracement During a pullback, the script measures relative volume against a rolling volume baseline. A stronger dry-up score means the retracement is happening with lighter participation, which often creates a cleaner continuation context than high-volume countertrend pressure. 3. Shallow Pullback Depth The pullback is measured against the prior impulse reference range. Controlled retracements receive higher scores, while deep retracements move toward failure risk. 4. Continuation Trigger The script waits for price to reclaim beyond the pullback pocket boundary with a small ATR buffer and relative-volume recovery. This prevents the chart from filling with premature pullback labels before the structure actually confirms. 5. Invalidation Boundary Every active dry-up pocket has a structural boundary beyond the deepest pullback extreme. If price breaks that boundary, the pocket is treated as invalid rather than leaving an old setup on the chart. 🟦 Chart Visuals The main visual layer is the Dry-Up Pullback Pocket. When a valid pullback begins, the script draws a compact rectangular pocket around the retracement range. If the pocket confirms, the script projects a tighter functional retest/hold zone instead of extending the entire historical pullback range. This makes the zone easier to use: bullish zones focus on the reclaimed upper pocket area, bearish zones focus on the reclaimed lower pocket area, and the dotted invalidation boundary remains beyond the failed side of the structure. Dry-Up Watch labels can appear before final confirmation when the pullback already has strong volume contraction and acceptable structure. Rejected context boxes are optional and disabled by default because they are diagnostic, not actionable hold zones. Trigger labels remain compact and controlled by cooldown logic. The default behavior keeps the chart active enough to be useful without making it feel crowded or noisy. 🟨 Info Panel The panel summarizes the current state: Trend Side - bullish trend, bearish trend, or no clean trend. Dry-Up Score - how strongly volume contracted inside the active or most recent pocket. Pullback Depth - retracement depth relative to the prior impulse. Trigger State - mapping, triggered, expired, boundary lost, trend lost, or waiting. Failure Risk - a compact risk read based on depth, volume behavior, and pullback duration. The panel location, panel theme, panel font size, and label font size are configurable from settings. The first panel row follows the AGPro Series standard format with a single merged blue header row. 🟪 What Makes This Different This script is not a generic trend meter. It is not a SuperTrend reaction tool. It is not a broad continuation score dashboard. It is not a volume spike or climax detector. Low Volume Pullback Zones is focused on the relationship between trend continuation and volume contraction during the retracement itself. That makes the script different from tools that only measure trend strength, moving-average reclaim, breakout quality, support/resistance reactions, or high-volume pressure events. The core question is: Did the pullback become quiet enough, shallow enough, and controlled enough to justify a mapped continuation pocket? That narrow question is what gives the script its identity. 🧭 How To Read It Bullish dry-up pocket: The trend filter is bullish, price retraces into the EMA lane, average RVOL contracts, depth remains controlled, and price reclaims the upper pocket boundary. Bearish dry-up pocket: The trend filter is bearish, price retraces upward into the EMA lane, average RVOL contracts, depth remains controlled, and price reclaims the lower pocket boundary. Failure risk: Failure risk rises when the pullback becomes too deep, too long, or too active in volume terms. A higher failure risk means the retracement is no longer behaving like a quiet continuation pause. Invalidation boundary: The dotted boundary marks the structural area where the active pocket is no longer considered valid. ⚙ Key Settings Engine Preset: Daily Swing is the default and is designed for cleaner publication-grade structure. 4H Active keeps more frequent lower-timeframe pockets. Custom uses the direct input values. Fast / Mid / Slow EMA Lengths: Control the trend structure used by the pullback engine. Minimum ADX and Minimum EMA Slope: Help the script avoid mapping dry-up pockets in flat conditions. Relative Volume Length: Defines the baseline used to measure volume dry-up. Preferred Pullback RVOL: Controls how quiet the pullback should be to receive full dry-up credit. Preferred Max Depth: Defines the ideal shallow retracement threshold. Trigger Buffer: Adds a small ATR-based confirmation buffer beyond the pullback pocket. Pocket Projection Bars: Controls how far completed pockets extend to the right. Functional Zone Width: Controls how much of the original pullback range is projected after confirmation. Smaller values create a tighter retest/hold pocket; larger values keep more of the original pullback structure. Label Cooldown and Max Structures: Keep the overlay readable and publication-clean. 📌 Best Use This indicator is best used on markets that already show directional structure. It is designed for traders who study trend continuation, relative volume behavior, pullback quality, and invalidation-based chart structure. It can be used across crypto, forex, indices, equities, and commodities, but the most useful results generally appear when the market has enough trend strength for low-volume retracements to matter. 🟧 Design Philosophy Low Volume Pullback Zones was built to keep the chart premium and readable: Clean pocket boxes instead of noisy background clutter. Restrained watch and trigger labels instead of constant marker spam. Visible invalidation boundaries instead of ambiguous zones. Professional RVOL and depth scoring instead of simple moving-average touches. Configurable panel and label sizing for different chart layouts. The script is intentionally selective. Its strongest value comes from filtering out ordinary pullbacks and highlighting the ones where trend, volume dry-up, shallow depth, and continuation confirmation align.

Indicador

Key Levels Pro [AGPro Series]Key Levels Pro 🔑 Overview Key Levels Pro is a comprehensive, non-repainting level tracker that consolidates every institutionally significant price reference into one clean overlay. Previous day, week, and month highs/lows (PDH, PDL, PWH, PWL, PMH, PML) are plotted alongside Asian, London, and New York session highs and lows. Every level is actively monitored — touch count, break count, and respect rate update in real time, giving you a live quality score for each price zone. Most level scripts stop at drawing lines. Key Levels Pro goes further: lines automatically thicken on repeated touches, switch to dashed style when broken, and fade to muted color to signal invalidation. Zone rectangles extend back to the formation bar of each level, making historical respect visible at a glance. An ATR-aware label collision system keeps the chart readable on every timeframe, and same-price levels are intelligently deduplicated so you never see four overlapping labels at the same price. ─────────────────────────────────────────────────────── 📐 Unique Edge Unlike generic pivot or S/R scripts, Key Levels Pro tracks the behavioral quality of each level — not just its existence. A level that has been tested five times without breaking carries a different weight than a fresh, untested one. Key Levels Pro surfaces that difference automatically through line width, style, and panel data. What makes it distinct: 🔹 Complete previous-period coverage (PDH/PDL, PWH/PWL, PMH/PML) in one overlay, without redundant current-period duplicates. 🔹 Live session tracking for Asian, London, and New York simultaneously, with automatic hiding on Daily and higher timeframes. 🔹 Per-level touch count, break count, and respect rate computed from actual historical price interaction. 🔹 Dynamic line thickening on repeated touches (width 1 → 2 → 3). 🔹 Auto-broken state with dashed style + muted color — no distracting flags or banners. 🔹 Historical zone boxes extending back to the formation bar of each level. 🔹 ATR-aware label collision resolution that stacks overlapping labels vertically. 🔹 Price-based deduplication: when two levels share the same price, the higher-priority one wins (Monthly > Weekly > Daily > Session). 🔹 ATR-normalized proximity to the nearest level above and below the current price. ─────────────────────────────────────────────────────── 🔬 Methodology Previous-period levels are pulled from the daily, weekly, and monthly timeframes using request.security() with lookahead enabled for the completed-period values. This approach is standard, transparent, and non-repainting — historical data does not change. Session levels are tracked bar by bar using customizable session time inputs. Each session resets at its start time and tracks the running high and low until the session closes. The Asian, London, and New York sessions can each be configured independently. Touch detection uses an ATR-based tolerance band (default 10% of ATR). When price closes within that tolerance of a level, the touch counter increments. A break is registered when price closes on the opposite side of a level compared to the prior bar. Respect rate is calculated as touches / (touches + breaks) × 100. Line width scales with touch count: 1 touch = width 1, 2–4 touches = width 2, 5+ touches = width 3. Broken levels switch to dashed style and a muted color. The label collision system operates in three stages: first, all enabled levels are collected into a sorted array; second, same-price levels are deduplicated based on priority (Monthly highest, Session lowest); third, an upward sweep enforces minimum vertical spacing using a blend of ATR and chart-range heuristics, ensuring labels never overlap regardless of market volatility. ─────────────────────────────────────────────────────── 📊 Signals & States This script is a visualization and data tool — it does not generate buy or sell signals. Level states are communicated visually: 🔹 Active (solid line, full color): level has not been broken. 🔹 Touched (thicker line, 2–3px): level has been tested one or more times. 🔹 Broken (dashed line, muted slate color): level has been decisively closed through. Info panel states: 🔹 Session: active market session (Asian / London / New York / Off-Hours / N/A on Daily+). 🔹 Near Above / Near Below: price of the closest active level on each side of the current close. 🔹 Dist Above / Below ATR: distance expressed as a multiple of ATR(14). 🔹 Touch and respect rate data for PDH, PDL, PWH, PWL. ─────────────────────────────────────────────────────── ⚙️ Key Inputs Level Groups: Toggle previous day, week, month, and session levels independently. Session Times: Fully customizable start/end times for Asian, London, and New York sessions in exchange timezone. Zone Style: Enable/disable S/R zones and adjust zone transparency. Lines & Labels: Set line extension length, toggle labels, choose label density (All / Reduced / Minimal), set font size, and enable or disable same-price deduplication. Info Panel: Toggle panel, set location (six positions), and choose theme (Dark / Light). ATR Settings: Set ATR period and touch tolerance as an ATR multiple (0.02 to 0.50). ─────────────────────────────────────────────────────── 📖 How to Use 1. Add the script to a chart — all major levels appear immediately. 2. Adjust session times if trading non-crypto markets. 3. Watch line thickness: thicker = more tested = stronger historical reaction zone. 4. Dashed + muted color = broken. Treat broken levels as potential new S/R from the opposite side (role reversal). 5. Use the panel's Near Above and Near Below fields to gauge proximity before entry or exit decisions. 6. Use "Reduced" density (default) for cleaner charts, or switch to "All" when you need session context. 7. Works on all asset classes: crypto, forex, equities, indices, commodities. Recommended timeframes: 15m–4H for session levels; 1H–1D for previous-period levels. ─────────────────────────────────────────────────────── ⚠️ Limitations & Transparency 🔹 Session tracking is session-relative and resets each new session. 🔹 Touch tolerance is an ATR-based heuristic and may need adjustment on extremely low-volatility instruments. 🔹 All data is historical. Touch count and respect rate describe past price behavior, not future outcomes. 🔹 This script is not a trading strategy, does not issue trade signals, and cannot predict market direction. 🔹 On exotic or illiquid instruments with large gaps, formation-bar zone boxes may appear truncated if the level formed outside the chart's visible range. ─────────────────────────────────────────────────────── 🛡️ Risk Disclosure This script is provided for informational and educational purposes only. It does not constitute financial advice, investment advice, or a recommendation to buy or sell any financial instrument. All trading involves risk. Past level behavior does not guarantee future results. Always use proper risk management and test any approach in a demo environment before committing real capital.

Indicador

Session Reaction Map [AGPro Series]Session Reaction Map 🔷 OVERVIEW Session Reaction Map is a premium intraday study that maps how price reacts to the most important daily and weekly reference levels right at the opens of the Asia, London and New York sessions. Each session open is evaluated inside a fixed measurement window, and the resulting reaction is broken down into four dimensions: dominant move, close follow-through, wick rejection and counter-move penalty. The output is a single 0-100 reaction score that is then translated into tier-coded labels, premium reaction zones, an active reference band and a compact status panel, so you can instantly read what happened at each session open without scrolling through candles. The indicator is designed for discretionary traders, systematic traders, SMC and price action practitioners who want a clean, consistent and quantitative way to read session open behaviour around PDH, PDL, PDM, Daily Open and Weekly Open. Reactions are drawn as directional zones (bull zones above the reference and bear zones below), with up or down pointing labels centered on the reaction, so orientation is always unambiguous. 🧭 UNIQUE EDGE Most session open tools only mark time windows or highlight levels. Session Reaction Map goes further and quantifies the quality of the reaction itself. Four independent dimensions are measured against a fixed ATR-normalized baseline, and the final score determines not only whether a label is shown but also how prominent it is. Elite scores (80+) get the strongest visuals; strong scores (70-79) get a slightly softer treatment; watch scores (55-69) are coded as caution; anything below 55 is filtered out by default. This separation between detection (a session open near a reference) and evaluation (the reaction quality score) is the core edge. It lets you focus only on the best intraday reactions and discard noise automatically, while still being able to audit every component by adjusting the ATR length, touch tolerance, evaluation window and score thresholds. ⚙️ METHODOLOGY Session detection uses the chosen timezone and three session windows (Asia, London, New York), each with its own editable open range. When a session open occurs, the script checks whether the open price is within an ATR based touch tolerance of any enabled reference level (Previous Day High, Previous Day Low, Previous Day Mid, Daily Open or Weekly Open). If so, a reaction window is engaged on that bar and tracked for a configurable number of bars. During the reaction window, the live zone, reference band and dashed reference line are updated in real time. When the window completes, the final score is computed as: • Dominant move score (up to 45 points) - scaled against 1.20 x ATR • Close follow-through score (up to 30 points) - scaled against 0.90 x ATR • Wick rejection score (up to 15 points) - scaled against 0.50 x ATR • Counter-move penalty (up to -20 points) - scaled against 1.00 x ATR The sum is clamped into the 0-100 range and mapped into four tiers: Elite, Strong, Watch and Weak. The dominant direction of the reaction (up or down) is determined by comparing the upside excursion from the reference to the downside excursion from the reference during the window. 🎯 SIGNALS AND VISUALS • Reaction zones - rectangular areas connecting the reference level with the reaction extreme, tier-coded by score and bias • Active reference band - a thin accent band around the current reference level during a live reaction window • Dashed reference line - marks the exact reference price while the reaction is being measured • Tier-coded labels - up-pointing labels below bullish reactions and down-pointing labels above bearish reactions, centered on the reaction window • Session dots - small colored markers that optionally display only on valid events, keeping the chart clean • Active measurement highlight - an ultra-soft background shade on bars inside a live reaction window Labels use a ring buffer overlap check, so dense multi-session conditions do not pile labels on top of each other. When two labels would visually conflict, the higher-scored reaction wins. 🛠️ KEY INPUTS Sessions - enable/disable and edit Asia, London and New York session windows, each with its own color and timezone. Reference Levels - individually toggle PDH, PDL, PDM, Daily Open and Weekly Open. Reaction Logic - ATR length, touch tolerance in ATR, evaluation bars, label score filter, minimum label score, overlap reduction (bars and vertical ATR gap). Visuals - show/hide reference levels, session dots, dots only on valid events, reaction zones, minimum score for zones, zone transparency and extension, live reaction zone, active reference band with its ATR size and transparency, active measurement highlight, level width, label size, label offset in ATR and label background transparency. Panel - show/hide, position (six anchor points), Dark or Light theme, font size, optional guide row. All numerical inputs carry professional English tooltips explaining their role, so the script can be tuned for any symbol, timeframe and trading style. 📘 HOW TO USE 1. Apply the script on an intraday timeframe. It is designed for intraday use and will stay passive on daily/higher timeframes. 2. Recommended starting timeframe is 4H for swing intraday context, and 1H for tactical intraday work. Lower timeframes (15m, 30m) work too but may produce dense output. 3. Start with the default settings. Observe which sessions and which reference levels generate the most Elite and Strong reactions on your symbol. 4. Use the panel to monitor the current state: last session, last reference, bias, score, tier, label filter, zone filter and the active reaction status. 5. Treat Elite (80+) and Strong (70-79) reactions as the main signals. Watch tier is informative and Weak tier is generally discarded. 6. Align with your own confluence: higher timeframe bias, structure, orderflow, or whatever your primary framework is. The script does not issue buy or sell calls - it scores reactions, and you decide. ⚠️ LIMITATIONS AND TRANSPARENCY • This is not a strategy and does not place orders. No backtest statistics are implied. • Reaction scores are computed after the evaluation window completes, so they are not repainting but are confirmed with a lag equal to the evaluation window size. • The live reaction zone updates during the window and is finalized when the window closes. • Session behavior varies significantly by symbol (crypto vs FX vs equities) and by volatility regime. Inputs should be tuned per symbol. • Daily and Weekly references use standard request.security with barmerge.lookahead_off to avoid look-ahead bias. • The script is not a forecasting tool. It is a post-event quantification of how price has just reacted to a known reference level. 🛡️ RISK DISCLOSURE Trading involves substantial risk. Past reactions, patterns, zones or scores do not guarantee future performance. This script is provided for educational and analytical purposes only and is not financial advice. Always combine any tool with your own research, a defined risk plan and proper position sizing. You are solely responsible for your trading decisions.

Indicador

Price Void Atlas [AGPro Series]Price Void Atlas 🗺️ OVERVIEW Price Void Atlas maps the chart's low-interaction price corridors — zones where price travelled fast and spent very little time — and tracks how price behaves when it returns. Unlike volume-based profiles that highlight crowded price levels, this indicator surfaces the opposite: the empty highways of the chart. Every corridor carries a live state (Fresh, Entered, Passed, Rejected) so you can read return behavior at a glance. 🧭 UNIQUE EDGE Most volume profile and imbalance tools show where price concentrated. Price Void Atlas inverts the question: where did price refuse to concentrate? The detection engine is purely time-weighted and ATR-normalized, so it works identically on instruments without reliable volume data (forex, many altcoins, CFDs). The state machine adds a second layer — it does not just detect voids, it follows their return stories. This combination (time-based emptiness detection + entry-side-aware state tracking) is the core differentiator. 🔬 METHODOLOGY The Scan Length window is sliced into 40 horizontal price bands. For each historical bar in the window, every band it intersects receives an ATR-normalized time weight. Bands that accumulate weight below a sensitivity-driven percentile threshold are flagged as empty. Contiguous empty bands form a corridor. Height is capped at 50% of total range to keep corridors structurally meaningful. Candidates are scored on a 65/35 weighted blend of emptiness intensity and ATR-normalized height, then the top N survivors are kept. Optional vertical proximity merging (0.3×ATR) consolidates nearby corridors into larger atlas-feel zones. The state machine then observes price behavior per corridor: - Fresh → never touched since birth - Entered → price crossed inside; entry side is locked (top or bottom) - Passed → close crossed beyond the far boundary (clean traversal) - Rejected → close reversed beyond entry side by 35% of corridor depth 🔔 SIGNALS & ALERTS Three independent alert channels: - Void Entered — price re-enters an active corridor - Void Passed — price closes through the far boundary - Void Rejected — price reverses past its entry side Each alert fires once per bar on confirmed close. Corridors are drawn as persistent ATR-aware rectangles with state-colored borders and labels. A dominant corridor (highest rank score) gets a thicker border as a visual hierarchy cue. 🎛️ KEY INPUTS Core Engine - Scan Length (100–1000): window of bars analyzed - Sensitivity (Strict / Balanced / Loose): emptiness threshold - Max Voids (1–6): hard cap on simultaneous corridors - Hide Resolved Voids: removes Passed/Rejected for a clean view - Merge Vertically Close Voids: atlas consolidation Visual - Panel Location (5 positions), Panel Theme (Dark / Light) - Panel Font Size, Label Font Size (tiny → large, default normal) - Show Entry Side Hint (↑ / ↓ arrows on Entered labels) Alerts - Individual toggles for Entered / Passed / Rejected 🎯 HOW TO USE 1. Apply on a chart with enough history (200+ bars recommended for 300 Scan Length) 2. Fresh amber zones are untouched voids — potential re-interaction targets 3. When price approaches a Fresh zone, the corridor turns indigo (Entered) 4. Observe whether the interaction resolves as a traversal (Passed, teal) or a turn-away (Rejected, pink) 5. Use corridor boundaries as structural reference points alongside your own system 6. The dominant corridor (thickest border) represents the cleanest void by rank score 7. Works across all timeframes; adaptive rebuild cadence keeps performance consistent ⚠️ LIMITATIONS & TRANSPARENCY - This is an analysis aid, not a trading strategy. It does not generate buy or sell signals. - Corridor detection requires at least Scan Length bars of history; newly loaded charts render progressively as history accumulates. - The time-weighted emptiness metric depends on ATR stability; very low-volatility environments may produce fewer meaningful voids. - State transitions are evaluated on confirmed bar closes to prevent intrabar repainting. - Corridors persist across bars but are rebuilt on an adaptive cadence (5–25 bars depending on timeframe) for CPU efficiency. - All visuals are computed from the visible historical data on the current chart; extending the lookback will refresh the atlas. 🛡️ RISK DISCLOSURE This indicator is provided for educational and analytical purposes only. It does not predict future price movement, does not generate trade recommendations, and does not constitute financial advice. Trading involves substantial risk of loss. Past corridor interactions do not guarantee future behavior. Always conduct your own research and risk management.

Indicador

HH/HL/LH/LL Structure Tracker [AGPro Series]HH/HL/LH/LL Structure Tracker 🔹 Overview HH/HL/LH/LL Structure Tracker automatically classifies every confirmed swing on your chart using pure Dow Theory — the original price-action framework that precedes and underlies every modern market-structure methodology. Each pivot high is labeled as a Higher High (HH) or Lower High (LH), and each pivot low as a Higher Low (HL) or Lower Low (LL). The sequence of the last four swings derives a live trend state: Bullish, Bearish, or Ranging. No oscillators. No lagging averages. Just the raw geometry of price. 💎 What Makes This Different While most "market structure" indicators focus on Break-of-Structure or Change-of-Character logic layered with Smart Money terminology, this script returns to the foundation: the four-swing classification that Charles Dow documented over a century ago. The result is an uncluttered, universally readable overlay that communicates structural context at a glance — regardless of which higher-level methodology you apply next (SMC, Wyckoff, Elliott, or classical technical analysis). Key differentiators versus generic HH/HL scripts on the public library: • Live structure range zone that dynamically recolors with the trend state (bullish teal, bearish pink, ranging amber). • Bull Streak and Bear Streak counters — a quantifiable measure of trend persistence (e.g. "3 consecutive HH-HL swings"). • Semantic break classification: the panel distinguishes a continuation break (HH or LL broken in trend direction) from a reversal break (LH or HL broken against the prior structure). • Progressive label offset algorithm: when several same-type swings cluster without an intervening opposite swing, each subsequent label is offset further from price, eliminating the overlap that plagues most swing scripts on fast-moving charts. • AGPro design language: premium info panel, adjustable font size and theme, and a disciplined color palette. 🧠 Methodology 1. Pivot detection. A confirmed swing high is a bar whose high exceeds the preceding and following N bars (N = Pivot Length, default 5). Confirmed swing lows mirror the rule. Confirmation occurs N bars after the pivot bar, never repaints. 2. Swing classification. Each new confirmed high is compared to the previous confirmed high. If greater, it is HH; if lesser, LH. Lows are compared to the previous low: greater means HL, lesser means LL. 3. Trend derivation. If the most recent high is HH and the most recent low is HL, the trend state is Bullish. If LH and LL, Bearish. Any mixed sequence (HH + LL, LH + HL) returns Ranging. 4. Structure range zone. A rectangle is drawn between the most recent swing high and most recent swing low. The zone is always current: as new swings confirm, the zone updates in place. Zone color tracks the trend state. 5. Structure break. A close above the most recent swing high (or below the most recent swing low) fires a break event. The type of swing broken is reported — breaking an LH or HL typically precedes a trend reversal; breaking an HH or LL typically signals continuation. 📊 Signals & Alerts Three optional alert types are available, each using "once per bar close" frequency to prevent intrabar noise: • New Higher High confirmed — fires when a fresh HH is classified. • New Lower Low confirmed — fires when a fresh LL is classified. • Structure break — fires on a close outside the current structure range, labeled as either (reversal signal) or (continuation). The live info panel reports: Trend state, Bull Streak, Bear Streak, Last High (with type and price), and Last Break (with type and price). ⚙️ Key Inputs • Pivot Length — sensitivity of swing detection (2 to 50). Lower values capture minor structure; higher values isolate major swings only. Typical: 3–8 intraday, 5–15 swing trading. • Max Visible Labels — caps the number of historical labels kept on the chart to preserve a premium uncluttered look. • Label & Panel Font Size — five sizes from Tiny to Huge, default Normal. • Label Distance from Price (ATR) — base vertical offset of labels from pivot candles. • Structure Range Zone — toggle, transparency, and border. • Trend Background Tint — subtle bullish or bearish chart shading. • Info Panel — toggle, location (six positions), and theme (Dark or Light). • Alerts — independent toggles for new HH, new LL, and structure break. 🎯 How to Use Context tool, not a standalone signal generator. Use the trend state to filter entries from your primary methodology: take long setups only while Trend is Bullish and Bull Streak is building, or vice versa. The structure range zone highlights the active battleground between buyers and sellers — trades taken inside the zone are counter-trend by definition, trades taken on a decisive break of the zone align with the emerging new trend. Reversal breaks (LH or HL broken) are high-information events — they are often the first objective signal that a prevailing trend is losing conviction, ahead of any moving-average cross or momentum divergence. Continuation breaks (HH or LL broken) are confirmation events that validate staying with the trend. Works on all markets and all timeframes. Particularly effective on liquid instruments with clear structural rhythm: major crypto pairs, FX majors, index futures, and large-cap equities. ⚠️ Limitations & Transparency • Pivot confirmation requires N bars after the swing; the most recent unconfirmed swing is never labeled. • In low-volatility sideways regimes, pivot clustering is inevitable — the Pivot Length input should be raised to filter noise on ranging charts. • The trend state is derived from only the last two swings; it does not account for higher-timeframe context. Pair with a higher-timeframe version of the same script for multi-timeframe confluence. • Does not provide entry, stop, or target levels. It is a structural framework, not a complete trading system. 📌 Risk Disclosure This indicator is for educational and analytical purposes only. It does not constitute financial advice, a trading recommendation, or a guarantee of future performance. All trading involves risk of loss. Past structural patterns do not guarantee future outcomes. Always conduct your own due diligence and use appropriate risk management.

Indicador

Swing Failure Pattern (SFP) Engine [AGPro Series]Swing Failure Pattern (SFP) Engine ──────────────────────────────────────────────────────────── OVERVIEW ──────────────────────────────────────────────────────────── Swing Failure Pattern (SFP) Engine detects high-probability liquidity sweep events at prior swing highs and lows. An SFP occurs when price pierces a recent swing level with a long wick but closes back inside the prior range, signalling failed continuation and potential mean reversion. Each event is scored on four components, drawn as a mid-sized support/resistance reaction zone, and tracked through its live cycle — with panel statistics on MFE, MAE, and hit rate. Designed for visual pattern reading and confluence; not a buy/sell system. ──────────────────────────────────────────────────────────── UNIQUE EDGE ──────────────────────────────────────────────────────────── Most SFP indicators mark the sweep candle and stop there. This engine treats each SFP as a living support/resistance band: the zone extends to the right every bar and only freezes when the swept level is actually broken on close. That preserves the SR context that traders use in real decisions, without cluttering charts with zones that never die. A composite score (0-100), confluence grouping of nearby events within 0.5 ATR, and live MFE/MAE tracking in ATR units turn a common pattern into a measurable framework. ──────────────────────────────────────────────────────────── METHODOLOGY ──────────────────────────────────────────────────────────── Swing detection uses pivot highs and lows confirmed by a configurable lookback. An SFP is confirmed on bar close when four conditions are met: 1. The bar wicks beyond a prior unswept swing high (bearish) or swing low (bullish) within the active lookback window. 2. The close reclaims the prior range by at least the user-defined ATR distance (default 0.25 ATR). 3. The sweep-side wick represents at least the minimum wick ratio of total bar range (default 55 percent). 4. Bar volume exceeds its 20-period SMA by the configured multiplier (optional, default 1.15x). Composite score (0-100) weights wick ratio (40), reclaim distance in ATR (30), volume confirmation (15), and swing age (15). Only events above the minimum score threshold are drawn. Each confirmed SFP removes its swept swing from the active array to prevent re-triggering on the same level. Confluence grouping merges same-side events within 0.5 ATR into a single labelled zone with an x2, x3 count. ──────────────────────────────────────────────────────────── SIGNALS & ALERTS ─────────────────────────────────────────────────────────── Visual signals on chart: - State-coloured label at the sweep bar reading Bull SFP or Bear SFP with the composite score (e.g., Bull SFP 74). Confluence-grouped events are suffixed with the merge count (e.g., Bear SFP 81 x2). - Rectangular zone spanning the swept level and the SFP close, with a small ATR buffer. The zone extends right each bar while active and freezes in neutral grey when the swept level breaks. - Dotted horizontal line marking the swept swing level. - Dashed projection line indicating the reversal direction. Alert conditions: - Bullish SFP: fires on the confirmation bar of a bullish event above the score threshold. - Bearish SFP: same, for bearish events. - Zone Invalidation (optional): fires when an active zone's swept level is broken on close. ──────────────────────────────────────────────────────────── KEY INPUTS ──────────────────────────────────────────────────────────── Detection: - Swing Pivot Length - bars each side of a pivot (default 5). - Swing Lookback - how far back active swings are tracked (default 120). - Min Wick Ratio - minimum sweep wick as fraction of bar range (0.55). - Min Reclaim Distance (ATR) - how far close must reclaim (0.25 ATR). - Require Above-Average Volume and Volume Multiplier (default 1.15x). - ATR Length (default 14). Scoring & Filters: - Min SFP Score (default 55 of 100). - Max Active Zones retained on chart (default 8). - Stats Timeout - bars after which an unresolved event is counted in averages (default 30). Does not affect zone visibility. Visuals: - Zone transparency (default 80), confluence grouping distance (0.5 ATR), label size, and toggles for zones, swing lines, and reversal projections. Panel: - Location (8 options), Dark/Light theme, text size. Alerts: - Independent toggles for bullish, bearish, and invalidation alerts. ──────────────────────────────────────────────────────────── HOW TO USE ──────────────────────────────────────────────────────────── Apply the indicator to any chart and timeframe. Higher timeframes (1h and above) produce cleaner swings; lower timeframes require a higher Min Wick Ratio and Min Score to filter noise. Read SFPs as liquidity sweep events, not standalone entries. A bullish SFP below a prior swing low indicates that sellers failed to extend the move — often a location where larger participants accumulate. The score reflects sweep quality; higher scores (70+) generally correspond to cleaner rejections. Use the zone as a support/resistance reference until it is invalidated. Panel statistics describe the observed sample on the loaded chart, not a backtested system. MFE Hit Rate is the percent of resolved zones that reached 1 ATR in the SFP direction before the swept level broke — it is a quality reference, not a win rate for any trading strategy. ──────────────────────────────────────────────────────────── LIMITATIONS & TRANSPARENCY ──────────────────────────────────────────────────────────── - Signals confirm on bar close; intrabar conditions may change until close. - Pivot detection introduces a natural bars-of-right-context lag equal to the Pivot Length. This is intrinsic to any pivot-based approach. - Panel statistics reflect events visible on the current chart load and will vary with timeframe, symbol, and bar range. - MFE Hit Rate is not a profit expectation. It measures whether price moved 1 ATR in the SFP direction before the swept level broke. - Volume confirmation uses chart volume and may behave differently on symbols with inconsistent volume data. - The indicator uses standard Pine Script drawing objects. Chart reload may reset ephemeral visual states of resolved zones. ──────────────────────────────────────────────────────────── RISK DISCLOSURE ──────────────────────────────────────────────────────────── This indicator is a visualisation and analysis tool. It is not a trading system, not financial advice, and not a signal service. It does not predict future price movement. All trading decisions carry risk of loss and are the sole responsibility of the user. Historical pattern behaviour does not guarantee future results. Test thoroughly on your instruments and timeframes before making any decisions.

Indicador

Session H/L + Session Vwaps [UTC+2]a simple yet Effective Indicator with multiple configurable Vwaps and Session Liquidity Zones

Indicador

HOLO Engine Overview This is a Pine Script v5 conversion of the HOLO concept originally coded by thi4gon for MetaTrader 4. Full credit to thi4gon for the original systems logic and mean-reversion framework — this publication brings that idea into TradingView with a fully rebuilt engine, multi-timeframe support, signal filtering, an info panel, and alert conditions. HOLO stands for Highest Open / Lowest Open. The core idea: the highest and lowest opening prices recorded by intraday bars since the day started act as significant mean-reversion levels. Price tends to return to these open extremes after deviating from them. The HO is a potential sell level; the LO is a potential buy level. Stop-loss reference is the current day's running high (for sells) and running low (for buys). How It Works At the start of each new day, the engine resets and begins tracking the highest open and lowest open printed by H1 candles (or any selected timeframe). These levels are not highs and lows of the candle — they are the open prices, making them distinct from standard session high/low tools. A trade setup occurs when: A bar opens inside the zone between the HO/LO and the corresponding daily extreme (sell zone = between HO and Daily High; buy zone = between Daily Low and LO) Price touches the HO or LO level during that bar Price has not broken outside yesterday's high/low range (breakout filter) The current H1 bar is not the bar that created the HO/LO (breakout bar filter) Today's range has reached at least 50% of the daily ATR (optional, enabled by default) All signal evaluation is done on confirmed closed bars only — no repainting. Features H1 HO/LO primary levels with multi-timeframe options (H4, M30, M15, M5, M1) Shaded buy and sell zones with readable area labels Daily High/Low as stop-loss reference lines Yesterday's High/Low as breakout boundary Optional Previous Day HO/LO, Weekly High/Low, and Monthly High/Low Equidistant pip-projection lines from the HO or LO level Confirmed-bar signal arrows with ATR range filter and tolerance input Info panel: live status, Range/ATR %, day range in pips, ATR in pips, entry and SL levels, bar countdown timer Color-coded legend table 8 individual alert conditions including dynamic price alerts Timeframe warning when applied to daily or higher charts Duplicate price filter to prevent overlapping labels All drawings rendered at the last bar for performance Apply on intraday timeframes (M5 to H1 work best) Primarily designed for Forex — pip value is auto-calculated from syminfo.mintick Works on any instrument but pip labeling is calibrated for 5-digit and 3-digit FX pairs The indicator does not provide financial advice. All levels are reference points — manage risk independently Credits Original HOLO concept and MetaTrader 4 indicator by thi4gon. This TradingView implementation was built from the ground up in Pine Script v5 by the Amorphos team, adding multi-timeframe support, signal filtering, dynamic alerts, and a full visual dashboard on top of thi4gon's original framework.

Indicador

por CognitiveAlpha

AG Pro Previous Day Sweep & Reclaim [AGPro Series]AG Pro Previous Day Sweep & Reclaim Overview / What it does AG Pro Previous Day Sweep & Reclaim is an overlay built to map one very specific price behavior around the previous day’s range: a sweep of the Previous Day High (PDH) or Previous Day Low (PDL), followed by a reclaim back inside the level. The script is designed for traders who want a structured way to observe failed expansion attempts around prior-day liquidity. Instead of treating every break of PDH or PDL as continuation, this tool focuses on the opposite question: when price briefly trades beyond a prior-day extreme and then reclaims that level, is the move showing signs of rejection strong enough to deserve attention? The core idea is intentionally narrow. This is not a broad market-structure engine, not a support/resistance dashboard, and not a general breakout system. Its purpose is to isolate a specific sequence: sweep -> reclaim -> quality assessment. That single workflow helps keep the script readable and functionally distinct. Signals can be confirmed on the same bar or on the next bar, depending on user preference. Once a reclaim is confirmed, the script assigns a quality score, draws a directional arrow, prints a reclaim label, and keeps the visual structure compact enough for practical chart work across intraday and higher timeframes. Unique Edge The distinguishing feature of this script is that it does not simply plot PDH and PDL, and it does not label every break as meaningful. It attempts to separate ordinary range interaction from failed liquidity grabs by requiring reclaim confirmation and then grading the event. Its logic is centered on reversal-quality mapping rather than static level display. That means the script does more than show where the previous day’s extremes are located. It evaluates whether the move through those extremes was shallow or excessive, whether the reclaim was weak or decisive, whether wick behavior supports rejection, whether volume was comparatively active, and whether the event occurred inside the selected session context. Another practical edge is the confirmation flexibility. Some traders prefer immediate reclaim behavior on the same bar. Others want one additional bar for confirmation. This script supports both approaches, plus an Either mode for broader detection. The visual side is also deliberately managed. Reclaim labels, arrows, guide lines, sweep boxes, label spacing controls, visible label limits, and HTF label filtering are included so the output remains usable instead of turning into uncontrolled chart clutter. Methodology The script retrieves the previous day’s high and low and tracks live interaction with those two reference levels. Bullish reclaim logic begins with a downside sweep: - price trades below the Previous Day Low - price then closes back above the Previous Day Low - confirmation can occur on the same bar, on the next bar, or by either method depending on settings Bearish reclaim logic mirrors that process: - price trades above the Previous Day High - price then closes back below the Previous Day High - confirmation follows the selected reclaim mode After confirmation, the script computes a quality score from multiple components. These components are intended to give structure to the event rather than to claim certainty about future direction. The quality model includes: - sweep depth relative to ATR - reclaim strength within the bar range - rejection wick fraction - relative volume versus a moving average baseline - bar range relative to ATR - urgency factor for same-bar versus next-bar confirmation - candle body bias - session participation The final score is normalized to a 0-100 scale and translated into a simple tier: - A - B - C - D This score is not meant to be a prediction engine. It is a ranking tool that helps organize reclaim events by relative quality under the script’s own rules. Session filtering is available because many traders only want to evaluate sweep-and-reclaim behavior during specific active windows. London, New York, custom sessions, or unrestricted monitoring can be selected. For chart usability, the script also includes: - previous day range fill - optional reclaim guide lines - optional sweep boxes - reversal arrows - reclaim labels - summary panel - visible label limits - HTF smart label filtering - minimum bar spacing between same-side labels Signals & Alerts The script produces two primary confirmed event types: 1. Bullish Previous Day Sweep & Reclaim A downside sweep through PDL followed by a reclaim back above that level. 2. Bearish Previous Day Sweep & Reclaim An upside sweep through PDH followed by a reclaim back below that level. When enabled, the chart can display: - directional reclaim arrows - reclaim labels with score, tier, and confirmation mode - sweep zone boxes - short reclaim guide lines Built-in alerts are included for: - Bullish Previous Day Sweep & Reclaim - Bearish Previous Day Sweep & Reclaim These alerts are tied to confirmed reclaim conditions defined by the selected confirmation mode and minimum quality threshold. Key Inputs Reclaim Confirmation Choose whether confirmation must occur on the Same Bar, Next Bar, or Either. One Signal Per Side / Day Limits repeated signals of the same side within a single day. Use Session Filter Restricts detection to the selected session environment when desired. Minimum Quality Score Filters out lower-ranked reclaim events. ATR Length / Volume SMA Length Inputs used by the quality model. Ideal Sweep Depth (ATR) / Maximum Sweep Depth (ATR) Define how the script evaluates sweep depth quality. Label and Visual Controls Manage font size, offset, sweep boxes, guide lines, visible label count, and general chart cleanliness. HTF Smart Label Filter Helps reduce label overload on daily, weekly, and monthly charts. Minimum Bars Between Same-Side Labels Introduces spacing between repeated bullish or bearish reclaim labels to prevent visual stacking. Limitations & Transparency This script is an analytical overlay. It is not a strategy, not an execution model, and not a guarantee of reversal. A reclaim of PDH or PDL can still fail. Markets can continue trending after a sweep, especially during strong directional conditions, news-driven volatility, or low-liquidity distortions. For that reason, the quality score should be interpreted as an internal event-ranking framework, not as proof of future performance. Session settings matter. Timeframe context matters. Confirmation mode matters. Label filters also affect what is visible on the chart, especially on higher timeframes. Users should understand that changing these inputs changes the strictness and presentation of the output. This tool does not use order book data, broker-specific execution data, or hidden liquidity metrics. It works entirely from chart-based price and volume inputs available in Pine. It is also important to note what this script does not attempt to do: - it does not classify overall market regime - it does not replace broader structure analysis - it does not define entries, stops, or exits for the user - it does not evaluate multi-level confluence outside its own reclaim framework In short, it is a focused map for previous-day sweep and reclaim behavior, nothing more and nothing less. Risk Disclosure This script is for chart analysis and educational use only. It does not provide financial, investment, legal, or tax advice. All trading decisions involve risk. Past price behavior around previous-day levels does not guarantee future results. Users should apply their own confirmation process, risk management rules, and market context analysis before acting on any chart signal. Always test settings carefully and use the tool as one component inside a broader decision-making process, not as a standalone basis for trading.

Indicador

AG Pro PDH PDL PWH PWL Engine [AGPro Series]AG Pro PDH PDL PWH PWL Engine Overview / What it does AG Pro PDH PDL PWH PWL Engine is a price-reference overlay built to track prior day, prior week, and prior month high / low levels in a clean and structured way. The script can display PDH, PDL, PWH, PWL, and optionally PMH / PML, together with midpoint equilibrium levels for the selected ranges. The main purpose of the script is not to predict direction, generate guaranteed entries, or replace a complete trading plan. Its role is narrower and more practical: it helps traders keep important prior-period reference levels visible on the chart, distinguish which levels remain active, and identify which ones have already been traded through. In many markets, prior highs and lows are widely monitored as liquidity, reaction, and reference areas. This script organizes those areas into a format that is easier to read in live conditions. A core design goal of this tool is chart hygiene. Many prior-level indicators become visually noisy when several daily, weekly, and monthly references are drawn together. This script was designed to keep the structure readable by using a minimal label system, right-extended lines, a swept / unswept state model, and an optional dashboard that summarizes the nearest active daily, weekly, and monthly levels. The result is a workflow-oriented overlay that helps with context. Instead of forcing interpretation through aggressive signals, it presents a structured map of where important prior-period levels are located, whether they are still untouched, and whether current price is approaching one of them. That makes it suitable for traders who want an objective level engine rather than a directional prediction tool. Unique Edge The script focuses on presentation quality and state clarity rather than simple level plotting. Prior highs and lows are not rare concepts, but the practical usefulness of such levels depends heavily on how they are filtered, displayed, and maintained on the chart. This script aims to improve that usability in several ways. First, it separates active levels from swept levels. This matters because a previously untouched level and a level that has already been traded through do not carry the same contextual value for many traders. By visually differentiating unswept and swept references, the overlay can help reduce ambiguity when reviewing current structure. Second, it combines multi-period references in one coherent engine. Daily, weekly, and optional monthly levels can all be displayed together, while preserving a relatively clean visual hierarchy. This is particularly useful for traders who want to see whether current price is interacting with short-term references inside larger higher-timeframe ranges. Third, it includes proximity logic. The script can highlight levels when price is near them using a threshold defined in ticks, percentage, or ATR terms. This does not imply a trade signal by itself. Instead, it acts as a situational awareness feature that helps traders notice when price is entering a predefined level zone. Fourth, the script offers session and timezone controls. That allows the user to adapt the level-building logic to the exchange clock or to a chosen session definition. For traders who care about session-based construction and consistency across instruments, this can be an important operational detail. Finally, the panel is designed as a compact summary rather than a decorative feature. It reports the nearest active daily, weekly, and monthly references, shows counts for active and swept levels, and keeps session / timezone / label mode settings visible. The goal is to reduce chart scanning time and make the script easier to use during live analysis. Methodology The engine tracks highs and lows from completed prior periods and then projects those values forward as reference lines. Depending on the enabled settings, it can build: - Previous Day High and Previous Day Low - Previous Week High and Previous Week Low - Previous Month High and Previous Month Low - Optional equilibrium midpoints for each enabled range Each level is created only after the relevant source period is completed. In that sense, the level itself is based on completed historical range data. Once created, the line is monitored for its state. If price trades through a high reference or a low reference, the script marks that level as swept and changes its visual treatment accordingly. The script also maintains historical periods up to the number defined in the settings. This makes it possible to preserve a limited amount of recent structure without keeping an unlimited number of stale objects on the chart. The equilibrium option adds the midpoint of the corresponding prior range. Some traders use these 50% areas as balance references or as secondary context between the prior high and low. Because that midpoint is optional, the user can keep it visible when needed or disable it for a cleaner chart. The proximity engine measures how close current price is to an active level using one of three methods: - Tick distance - Percentage distance - ATR-based distance This feature is meant to flag nearness, not to define trade quality on its own. A prior level being near price does not automatically make the setup actionable. It only states that price is close to a tracked reference according to the selected threshold logic. States / Signals / Alerts This script is primarily a level-state and context tool. It is not a directional forecasting model. Its most important outputs are state-based: 1) Active level A level is considered active when it has been created from a completed prior period and has not yet been traded through by price. 2) Swept level A level is considered swept when price trades through that reference. Visually separating swept levels from active ones helps the chart communicate which prior references remain untouched. 3) Near-level condition When enabled, the script can highlight active levels that are close to current price according to the user-defined threshold method. This can help traders focus attention on nearby reference zones without scanning the entire chart manually. 4) Compact dashboard state The panel summarizes the nearest active daily, weekly, and monthly levels, along with active count, swept count, near count, selected timezone, session configuration, and label mode. The included alert conditions are intentionally simple and state-based: - Price is near one of the active levels - At least one tracked level was swept on the current bar These alerts are meant to support monitoring. They are not, by themselves, a complete trading trigger. Users should interpret them together with structure, volatility, session context, confirmation rules, and their own risk process. Why this script can be useful This script can be useful because prior highs and lows often matter most when they are easy to monitor and hard to misread. In practice, traders do not only need the raw numbers; they need a chart presentation that allows those numbers to remain readable during fast market conditions. A clean prior-level map can help in several common situations: - Evaluating whether price is approaching an untouched daily or weekly reference - Checking whether a local move is happening inside a larger higher-timeframe level framework - Distinguishing still-relevant references from already-tested ones - Monitoring potential reaction zones without crowding the chart with excessive objects - Organizing reference structure across intraday and swing workflows The script is also designed to remain practical over time. Instead of drawing everything with equal visual importance, it uses state logic and summary logic to keep the display more structured. That can make the tool easier to integrate into a routine where prior-period references are part of the trader's contextual process. Another useful aspect is that the script stays objective. It does not attempt to label every market move with a strong opinion. It shows completed prior-period levels, their current state, and whether price is approaching them. Many traders prefer this kind of neutral reference framework because it can be combined with other methodologies without forcing one interpretation. Key Inputs Timezone The script can use the exchange timezone or a selected timezone. This affects how period transitions are interpreted. Use Custom Session Filter When enabled, highs and lows are built only from bars inside the selected session. This allows the user to adapt the range construction to a chosen session framework. Session Defines the custom session window when session filtering is enabled. Show Previous Day / Week / Month Levels Each group can be enabled or disabled independently so the user can decide how much structure to display. Show Equilibrium Midpoints Adds the 50% midpoint of each enabled prior range. Historical Periods to Keep Controls how many past periods remain visible on the chart for each enabled level family. Proximity Threshold Type Lets the user define nearness by ticks, percentage, or ATR. Threshold Value / ATR Length Controls the sensitivity of the proximity logic. Highlight Levels When Near Allows visual emphasis when price approaches an active level. Line Style and Extension Settings Controls the appearance of unswept and swept lines and whether active lines extend to the right. Minimal Label Mode Allows labels to be turned off, restricted, or shown for active levels, depending on the user's preferred chart cleanliness. Panel Controls The dashboard can be enabled or disabled and its size, position, and colors can be adjusted. Example use cases This script can be used in different ways depending on the trader's workflow. Intraday context mapping: A trader may monitor PDH and PDL together with PWH and PWL to understand whether intraday price is moving into untouched daily liquidity while still operating inside a broader weekly range. Reaction-zone awareness: A trader may use near-level highlighting to notice when price is approaching an unswept prior high or prior low and then look for separate confirmation with their own method. Structure filtering: A trader may ignore swept references and focus mainly on active levels that remain intact, especially when trying to simplify the chart during live sessions. Session-based reference building: A trader who prefers a specific session logic can use the session filter so the constructed ranges better match their market framework. Dashboard monitoring: A trader may use the panel as a quick situational summary to identify which daily, weekly, or monthly reference is closest without manually reading every line. Limitations & Transparency This script does not know why price interacts with a level. It only identifies prior-period references and tracks whether they are active, near, or swept according to the rules defined in the code. A prior level is not automatically support or resistance in every market condition. Some reactions are meaningful, some are shallow, and some levels are passed through with little response. For that reason, the script should be treated as a structured reference map rather than a self-sufficient trade decision engine. The near-level logic depends on user-defined thresholds. Different threshold types and values can materially change how often levels are classified as near. Traders should calibrate these settings according to instrument volatility and their own workflow. Session and timezone choices also matter. The same market can produce different prior-period values depending on how the session is defined. Users should select settings that match the way they analyze the instrument. Historical object limits, chart timeframe, and chart compression can influence how dense the display appears. A setting that looks clean on one instrument or timeframe may feel crowded on another. The script provides controls to manage that, but users should still adapt it to their own use case. The midpoint equilibrium lines are optional because not every trader uses 50% references the same way. Their inclusion does not imply that the midpoint has universal predictive value. It is simply provided as an additional structural reference. This script is intentionally conservative in what it claims. It does not claim to detect institutional intent, hidden order flow, or guaranteed reversals. It displays prior completed reference levels and their current state on the chart. Risk Disclosure This script is for chart analysis and educational use. It does not provide financial advice, investment advice, or trade recommendations. Prior-period highs, lows, and midpoint references can be useful market context, but they are not guarantees of reaction, reversal, continuation, or liquidity behavior. Market conditions can change quickly, and price can move through any level without producing a tradable setup. Users should combine this tool with their own confirmation process, execution rules, position sizing framework, and risk management. No indicator should be used as the sole basis for entering or exiting a trade. Before using any chart tool in live markets, it is important to understand how its settings affect output, how it behaves on the instrument being traded, and how it fits into a broader decision process. AG Pro PDH PDL PWH PWL Engine is designed to help organize prior-period level information in a cleaner and more operational format. Its value comes from clarity, state tracking, and context support, not from predictive certainty.

Indicador

AG Pro Liquidity Sweep Quality [AGPro Series]AG Pro Liquidity Sweep Quality OVERVIEW / WHAT IT DOES AG Pro Liquidity Sweep Quality is a pivot-based overlay designed to map bullish and bearish liquidity sweep events around confirmed swing highs and swing lows. Instead of only flagging whether price traded beyond a prior level, the script evaluates whether that move behaved like a meaningful rejection or a weak sweep. The result is a structured liquidity sweep indicator that focuses on sweep quality, not only sweep detection. In practical terms, the script looks for price moving above a prior swing high or below a prior swing low and then closing back through that level on the same bar or, if enabled, on the next bar. This behavior is commonly associated with stop hunts, failed breakout attempts, failed breakdown attempts, and short-term rejection events around visible liquidity. The script then ranks the event using a multi-factor quality model so the chart does not treat every sweep as equally important. This makes the tool relevant for traders studying liquidity sweep behavior, smart money concepts, ICT-style chart reading, rejection anatomy, wick-driven reversals, sweep confirmation, and swing-based context. It is not built to predict direction on its own. It is built to organize sweep events so users can distinguish weaker noise from stronger rejection structures. UNIQUE EDGE The main objective of this script is not to publish another generic liquidity grab marker. Its edge comes from the fact that it scores each confirmed sweep using a quality framework. That framework combines how deeply price traded through the level, how decisively it closed back beyond the level, the wick-to-body relationship of the sweep bar, relative volume behavior, swing freshness, nearby swing crowding, and optional higher-timeframe bias alignment. This matters because many sweep-style tools stop at a binary answer: sweep happened / sweep did not happen. This script asks a more useful follow-up question: how good was that sweep? That distinction is important on real charts. Some liquidity sweeps show strong rejection, clean close-back behavior, fresh structure, and supportive context. Others are simply noisy level violations inside a crowded area. By assigning a quality score, the script is designed to help users compare sweep events with more nuance. Another distinguishing feature is that the script separates watch conditions from qualified conditions. A level can first be challenged, then either reclaim cleanly or fail to reclaim. This helps reduce the tendency to treat every level breach as a reversal event. METHODOLOGY 1) SWING DETECTION The script uses confirmed pivot highs and confirmed pivot lows as its structural reference points. These pivots are not assumed in advance. They become available only after the user-defined Pivot Strength confirmation process is complete. 2) SWEEP TRIGGER A bearish sweep scenario begins when price trades above a stored swing high. A bullish sweep scenario begins when price trades below a stored swing low. 3) QUALIFICATION A sweep is considered qualified when price closes back through the swept level. By default, the script can evaluate same-bar reclaim behavior and, optionally, next-bar reclaim behavior. 4) QUALITY MODEL Each qualified sweep is scored using multiple factors, including: - penetration relative to ATR - rejection distance back through the level - wick-to-body ratio - relative volume versus a recent baseline - freshness of the swing level - nearby level crowding penalty - optional higher-timeframe trend alignment bonus The final output is normalized into a simple 1 to 10 quality score so chart reading remains fast and visually clean. 5) VISUAL MAPPING Qualified sweeps can display: - direction label - quality score label - sweep zone box - dashed memory line at the swept level - optional chart background tint - compact minor markers for lower-priority qualified sweeps This allows the chart to remain informative without forcing every event to carry the same visual weight. SIGNALS & ALERTS The script includes deterministic alert conditions for: - Bull Sweep Trigger - Bear Sweep Trigger - Bull Sweep Qualified - Bear Sweep Qualified - High Quality Bull Sweep - High Quality Bear Sweep A trigger means price challenged the stored liquidity level. A qualified sweep means price also reclaimed the level according to the script rules. A high-quality sweep means the final score exceeded the selected threshold. These states are intended to help users organize workflow and review price behavior. They are not instructions to buy or sell. KEY INPUTS Pivot Strength Controls how swings are confirmed. Higher values generally reduce noise but also make structural detection slower and more selective. Max Swing Age Limits how long old swing levels remain eligible. This helps keep the liquidity map focused on fresher structure. Allow Next-Bar Reclaim Allows the script to qualify a sweep when the reclaim happens on the next bar instead of only the sweep bar itself. ATR Length Used in the quality engine to normalize sweep depth and rejection distance. Relative Volume Length Defines the baseline used for volume comparison. Crowding Width (ATR) Helps penalize sweeps occurring in dense structural clusters, where nearby levels can reduce interpretive clarity. Higher Timeframe and HTF EMA Length Used to build an optional bias filter so aligned sweeps can receive a context bonus. Min Score For Full Labels Lets users keep high-information labels on stronger sweeps while weaker qualified sweeps can remain as compact markers. Same-Side Full Label Cooldown Reduces repeated full labels in the same direction over a short span, improving chart readability. LIMITATIONS & TRANSPARENCY This script is a chart-organization tool, not a stand-alone decision engine. Because the logic is pivot-based, swing levels are only confirmed after the chosen Pivot Strength delay. That means the structural reference points are confirmed swings, not instantly-known highs or lows. A liquidity sweep on one market, timeframe, or volatility regime may not behave the same way on another. The scoring framework is designed to rank events relative to the script's own rules, not to certify that a sweep will lead to reversal or continuation. Higher relative volume may improve context, but volume confirmation does not guarantee outcome quality. The higher-timeframe alignment feature is a contextual filter. It should not be interpreted as a macro trend forecast. Like any visual overlay, this tool can produce signals in choppy or highly reactive conditions that later prove less useful than they first appeared. Parameter selection matters. WHAT THIS SCRIPT IS NOT This script is not a promise of reversal. It is not a complete smart money framework. It is not a substitute for execution planning, risk management, or broader market context. It does not claim to detect institutional intent. It does not classify every level break as tradable. Instead, it focuses on one specific chart behavior: sweep-and-reclaim quality around confirmed swing liquidity. RISK DISCLOSURE This indicator is for analytical and educational use only. It does not provide financial advice, investment advice, or guaranteed trade outcomes. Markets can remain irrational, trend aggressively, or ignore local sweep signals for extended periods. Users should validate any chart workflow with their own process, risk controls, and market understanding before acting on any signal or alert. If you use this tool, it is generally best treated as a structural filter inside a broader workflow rather than as a stand-alone trigger. AGPro Series note: This publication is designed to emphasize structured chart reading, deterministic event definitions, and transparent methodology over promotional claims or outcome promises.

Indicador

Prev Day H/L Box Previous day HL and mid point to plot on the chart that will help to guage the market direction.

Indicador

por santosh_lalwani