Empiece

Close

Cipher Twister - Long and ShortINTRO / NOTES: This script is based on Market Cipher B Oscillator by Falcon The difference in this script is that only the useful points are printed on the indicator, namely Long and Short Trade Execution signals to be used by a bot, namely the PT Bot. The script also differs from the original that it has been upgraded to Pinescript v4 This oscillator can be used with ALL time frames, but generally works the best on 15 minute and 1 hour charts on ANY market, no matter, stock, forex, crypto, spot, futures, derivatives, Nasdaq etc... DEFINITIONS: This oscillator forms the foundation of Buy and Exit of Long and Short Trades. There are 2 'Red' Lines at the top of the channel and 2 Green Lines at the bottom of the channel. These two channels are set at default to be +53 / -53 and +60 / -60 respectively. These two lines will serve as the threshold point if one is to make cautious trades only. There is a center line which divides the Oscillator into two parts. Above the center line, the market is in over bought territory and Below the center line is in over sold territory. 'Red' dots are drawn by the indicator to represent a potential Short (or a signal to exit from a Long position) 'Green' dots are drawn by the indicator to represent a potential Long (or a signal to exit from a Short position) The 'Red' and 'Green' dots are draw when a Cross between both wt1 & wt2 cross, thus providing a fantastic indication of potential trend reversal and entry/exit of a position. STRATEGY NOTES: The strategy to use this indicator with for realistic and proper results would be to use it with an automated Trading Bot such as Profit Trailer (PT-BOT) You could use this strategy manually, however it would mean you would need to sit in front of the screen all day and night long and activate the trades immediately after the 'red'/'green' dots are drawn. Usually this will result in non-optimal entries and exits as well as loss on various instances when a 'red' and 'green' dot are printed close together (which is usually when the market goes into correction/consolidation) and slow entries/exits will result in a loss rather than a small profit or exit at BE (Break Even) ACTUAL STRATEGY (For use with automated bot) To be used in conjunction with Heikin Ashi Candles for added cautionary measures For LONGs ONLY -------------------- 1/ When 'Green' dot is drawn, ACTIVATE Long Position (Use 1.5% Risk Management for each trade) (Use Lot size based on 1.5% risk management and xLeverage (if any)) 2/ Make sure bot Opens an SL (Stop Loss) value based on 1.5% Risk Management 3/ When 'Red' dot is drawn, CLOSE Long Position. *If you want to add extra caution to your trade, only activate the trade if the 'Green' dot is BELOW the 'Green' Markers *For added caution, use color coded Heikin Ashi candles to 'confirm' Activation and Closing of a trade in the bot configuration --------------------------------------------------------------------------------------------------- For SHORTs ONLY -------------------- 1/ When 'Red' dot is drawn, ACTIVATE Short Position (Use 1.5% Risk Management for each trade) (Use Lot size based on 1.5% risk management and xLeverage (if any)) 2/ Make sure bot Opens an SL (Stop Loss) value based on 1.5% Risk Management 3/ When 'Green' dot is drawn, CLOSE Short Position *If you want to add extra caution to your trade, only activate the trade if the 'Red' dot is Above the Red Markers *For added caution, use color coded Heikin Ashi candles to 'confirm' Activation and Closing of a trade in the bot configuration --------------------------------------------------------------------------------------------------- Supplementary Notes: Make sure that your bot configuration will only activate ONE TRADE when the 'Green'/'Red' dot appears. Occasionally during high volatility , 'red'/'green' dots will appear intermittently before remaining drawn, thus the oscillator 'redraws' the dots during market movement. There will be times where occasionally a 'green' dot or a 'red' dot will appear, the trade will be opened, but the trade will fail due to the market manipulation (algorithm/market maker bots/fake volume etc), to wipe out those trading on derivatives and futures markets using leverage. Do not worry about this, no bot can make 100% wins, no strategy will achieve 100% win ratio and one necessarily doesn't need a high win ratio when using strict money management practices with your trading for SL and lot size. If you use this method, you will see great results, but again I must stress, using this method with a fully automated bot is the only way to achieve proper results.
Indicador Pine Script®
por Market-Pip-Factory
10
High/Low/Open/Close Daily, Weekly, Monthly Line I wrote this for the purpose of saving time while marking up charts by automating the process of drawing and labeling lines at areas of interest on larger timeframes while still having the option to change the style and size of the lines and labels to adjust for any timeframe and avoid a messy chart. I also used this as an exercise in menu organization giving users every imaginable option and producing clean readable code. - This indicator draws a line on the Daily, Weekly, and Monthly bar at the High, Low, Open and Close of each bar as price tends to react when revisiting these areas. - Each set of bars has an optional identifying label with its own color set that can be shown with or without the lines price value, and has drop down menus for size and style of each set of labels. - Each set of lines has inputs for line/text color, line width and style, and can be hidden if the user doesn't have the need for any particular timeframe. - Lines and Labels with delete when a new line is created. - I recommend going into Chart Settings/Status Line and turning off indicator arguments OR moving the script to the top of the indicator list to avoid an obstructed chart view with this indicators arguments. When Pine allows, I will update it to hide them. Contains some public domain code from T.V. manuals and tutorial for creating drop down input menus for options. / ~For My Pal Jittery~ ~ Who likes his clean chart and custom colors~
Indicador Pine Script®
por goofoffgoose
61
Baseline (BL)My baseline study lets you compare price to the previous days close. You can select the time frame for this baseline. I have included the ability to use a custom period length or your own anchor value. Custom anchor values are great for comparing the price to your cost average. The features I have included are bar color and background color. I liked the idea of the 'baseline" chart but I didnt like the implementation. Enjoy
Indicador Pine Script®
por The_Peaceful_Lizard
1
Percent Levels From Previous CloseThis indicator plots on the chart +/- 1% / 2% / 3% ranges based on the previous day's close levels. Disclaimer : Success in trading is all about following your trading strategy and indicators should fit into your own strategy, and not be traded purely on. This script is for informational and educational purposes only. Use of the script does not constitute professional and / or financial advice. You are solely responsible for evaluating the outcome of the script and the risks associated with using the script. In exchange for the use of the script, you agree not to hold monpotejulien TradingView user responsible for any possible claims for damages arising out of any decisions you make based on the use of the script.
Indicador Pine Script®
por Julien_Exe
19
HLC True Strength Indicator (with Vix)HLC True Strength Indicator Volume Weighted with Vix Line by SpreadEagle71 This indicator is a True Strength Indicator with Close, High and Low used together, along with the TSI of the Vix. The white line is the close. The red line is the lows and the blue is the highs. These are also volume-weighted. How to Interpret: 1. zero line crosses. If SPY/SPX500 crosses the zero line, then its bullish. If the purple Vix line crosses up, watch out because this is bearish. 2. white/blue/red lines cross purple (Vix). If they cross upwards, this is bullish. If downward, this is bearish. Basically, SPX, ES1!, SPY or even DIA can be used. The security and the Vix should travel in opposite directions and cross the zero-line at the same time. But this is not always the case. 3. Black area infills. These are used between the close and the highs (blue) and the lows(red). Close should not be between these in order to have momentum. 4. Close (white line) leads. Close is the last price so it tends to show where the others (highs and lows) are going. If the close is sagging below a high where the blue lines are on top, this could mean that there is a reversal coming. Same holds true for a white line above a "valley" formed by the blue and red lines; it could mean a reversal to the upside soon. 5. The Black Infill areas as a squeeze or contraction/expansion area. The thinner the black infill areas, the more of a momentum "squeeze" could be present. Wide black infill areas mean increased volatility and what may come next is a reversion to the mean for volatility. See TTM Squeeze Indicator or the Squeeze Momentum Indicator (kudos LazyBear). Lastly, just remember indicators indicate; they are not magic. :) SpreadEagle71
Indicador Pine Script®
por SpreadEagle71
4
Key Levels// How it Works \\ Calculating Previous Days, Weeks and Monthly open, high, low, close and vwaps Plots these levels on your chart // Settings \\ You can enable/disable any of the levels you want to see You can also change the amount of bars back the levels are plotted back to // Use Case \\ These levels are often used in different methods of Technical analysis for support and resistance. // Suggestions \\ Happy for anyone to make any suggestions on changes which could improve the script, // Terms \\ Feel free to use the script, If you do use the script could you please just tag me as I am interested to see how people are using it. Good Luck!
Indicador Pine Script®
por TradingWolf
12
Close strength lineThe close strength line shows how much the strength in the current up/down trend actually present. We calculate it by difference between High-Low and the way it moves with respect to Close moving averages. You can change intervals from settings. Use this in combination with any other moving average indicator e.g. EMA 13 when Close line is below other indicators/priceline, it is Uptrend and close line acts as support. when Close line is above other indicators/priceline, it is Downtrend and close line acts as resistance. You can also use Close line as potential Targets for Buy or Short trades depending on it's direction with respect to price line last Close.
Indicador Pine Script®
por akjuvekar1
Close Combination Lock Style - Visual AppealThis creates a combination style closing price change on each tick. It has two theme options, one as silver dials for Dark Theme and the other as black dials for White Theme. We get fixated to watching closing prices on charts and it gets visually daunting. This creates a combination style price change which updates on each tick, which is quite pleasing to the eye. When new price is above current center line, it shift the above prices showing ▲ arrow, and if new price is lower, it will shift the bottom prices showing ▼ arrow. If there is no change in price between the ticks, it will show =.
Indicador Pine Script®
por processingclouds
T3 + BB TRES EMAS + BANDAS DE BOLLINGER INDICADOR 1: TRES EMAS (MEDIA MOVIL EXPONENCIAL) Con este indicador puede visualizar el promedio de precios con mayor peso a los datos mas recientes. Se calculan y dibujan tres medias móviles exponenciales: 4, 20 y 200 últimas velas. -Rápida EMA1 = 4, paso = 1 -Media EMA2 = 20, paso = 2 -Lenta EMA 3 = 200, paso = 10 INDICADOR 2: BANDAS DE BOLLINGER Con este indicador podrá ver la fuerza y la tendencia del mercado, es decir la mide la volatilidad del precio del activo. Si el precio sobrepasa la banda superior, el activo está sobrecomprado. Si el precio sobrepasa la banda inferior, el activo está sobrevendido. Longitud tendencia - BASE = 20, paso = 1 Desviación Estándar - Multiplicador = 2, paso = 0.2 Estos 2 indicadores sirven para todo tipo de activos: FOREX, CRIPTO, CFD´s, ETC. ------------------------------------------------------------------------------------------------------------------ THREE EMAS + BOLLINGER BANDS INDICATOR 1: THREE EMAS (EXPONENTIAL MOVING AVERAGE) With this indicator you can visualize the average of prices with greater weight to the most recent data. Three exponential moving averages are calculated and drawn: 4, 20 and 200 last candles. -Fast EMA1 = 4, step = 1 -Average EMA2 = 20, step = 2 -Slow EMA 3 = 200, step = 10 INDICATOR 2: BOLLINGER BANDS With this indicator you can see the strength and trend of the market, that is, it is measured by the volatility of the asset price. If the price goes above the upper band, the asset is overbought. If the price goes above the lower band, the asset is oversold. Trend length - BASE = 20, step = 1 Standard Deviation - Multiplier = 2, step = 0.2 These 2 indicators are used for all types of assets: FOREX, CRYPT, CFD's, ETC.
Indicador Pine Script®
por JCMR76
5
Percentage Levels by TimeframePlots the positive and negative percentage levels from a selection of timeframes and sources for any ticker. You can use this within a pullback trading system. For example, if you historically look at the average pullback of large cap stocks and ETF's, you can use this indicator to plot the levels it could pullback to for an entry to go long. It can be used as potential targets when trading a ticker short. Another use for this is to backtest the set percentage targets using TradingView's bar replay feature to see how ETF's and large cap stocks have reacted at these levels. Note: This is intended to be used at timeframes equal to higher than the chart's as it may cause re-painting issues. Currently percentage levels are statically set to 1, 3, 5, 10, 15, 20, 25, and 30% levels above and below the chosen source (open, high, low, close). You can also display the data based on timeframes from Daily (1D) all the way up to Yearly (12M) *Not financial advice but in my opinion the current percentage levels set (see above) are best used for ETF's and Large Cap Stocks. Jan 2 Release Notes: Added the ability to select the historical bars to look back when plotting levels Jan 2 Release Notes: To get a better display or proper resolution on your charts, change the view settings to "Scale Price Chart Only" Jan 2 Release Notes: To add % labels for this indicator on the price axis, change your chart settings to include "Indicator Name Label" & "Indicator Last Value". You can find this under the Label section after hitting the gear icon in the bottom right of your chart. Jan 2 Release Notes: Added: Custom Line Plot Extension Settings. Ideally both values should be equal to display optimal extended lines. To return to a base setting: '1' = Historical Lookback & '0' = Offset Lines. Also note this is dependent on the timeframe you are viewing on the chart. Jan 2 Release Notes: Removed indicator from example chart that was not needed. Jan 2 Release Notes: Updated some comments in the Pine Script Jan 2 Release Notes: Update: Added commentary and instructions in the indicator settings to address recommended line plot settings for Stocks/ETF's vs Futures Jan 2 Release Notes: Changed title from "Calculation Method" to "Calculation Source" Jan 4 2021 Normal use of security() dictates that it only be used at timeframes equal to or higher than the chart's as it may cause re-painting
Indicador Pine Script®
por thacoolbreeze
4
Plot Real Open and Close - SamXI built this indicator as a personal request from a friend. He often trades using Heiken Ashi charts, but wanted a way to easily cross-reference real-price open and close values for the same timeframe on the same chart (as HA candles are by design lagging, they can take a few periods to catch up to a large move). This can also be used to help guide support and resistance zones using real-price data points should you so choose. There are 2 major ways to configure this indicator to display real-price open and close: As a Bar or Hollow Candle style chart overlay As on-chart shapes (allowing individual control over which data to show - open, close, or both)
Indicador Pine Script®
por SamAccountX
3
Sessions & Days Of The WeekTraders tend to focus their energy on specific sessions or time periods. This indicator will plot the days of the week, and also highlight the following sessions: Frankfurt (2:00am - 11:00am EST), London (3:00am - 12:00pm EST), New York (8:00am - 5:00pm EST), Sydney (5:00pm - 2:00am EST), Tokyo (7:00pm - 4:00am EST). It’s important to be aware that Session Open and Close times will vary based on the time of year, as countries shift over to daylight savings time.
Indicador Pine Script®
por Nowtech
7
DailyLevelsLibrary "DailyLevels" Functions for acquiring daily timeframe data by number of prior days. openD(daysPrior, spec, res) Gets the open for the number of days prior.   Parameters:      daysPrior : Number of days back to get the open from.      spec : session.regular (default), session.extended or other time spec.      res : The resolution (default = '1440').   Returns: The open for the number of days prior. highD(daysPrior, extraForward, spec, res) Gets the highest value for the number of days prior.   Parameters:      daysPrior : Number of days back to get the high from.      extraForward : Number of extra days forward to include.      spec : session.regular (default), session.extended or other time spec.      res : The resolution (default = '1440').   Returns: The high for the number of days prior. lowD(daysPrior, extraForward, spec, res) Gets the lowest value for the number of days prior.   Parameters:      daysPrior : Number of days back to get the low from.      extraForward : Number of extra days forward to include.      spec : session.regular (default), session.extended or other time spec.      res : The resolution (default = '1440').   Returns: The low for the number of days prior. closeD(daysPrior, spec, res) Gets the close for the number of days prior.   Parameters:      daysPrior : Number of days back to get the open from. 0 produces the current close      spec : session.regular (default), session.extended or other time spec.      res : The resolution (default = '1440').   Returns: The close for the number of days prior. hlc3D(daysPrior, extraForward, spec, res) Gets the HLC3 value for the number of days prior.   Parameters:      daysPrior : Number of days back to get the HLC3 from.      extraForward : Number of extra days forward to include. Determines the closing value.      spec : session.regular (default), session.extended or other time spec.      res : The resolution (default = '1440').   Returns: The HLC3 for the number of days prior.
Biblioteca Pine Script®
por Electrified
Light BalanceThe script is simple, going for a color scheme logic which tenderly avoids rigorous signals processing. For the script to remain simple, logical derivatives are also out; as such, there are no secondary relations built off of primary ones. And it also ignores (unless you do this yourself) the logic in a varying order of lines. Coloring has been done according to a limited set of relations between the four (4) plotted lines. Quite a bit of information is capture, as you'll see when looking at line order, crossings, and transparency transitions and their patterns. The approach makes the relations ones which can be learned over time; you become the algorithm to sort out signals. Ha ha. I know that sounds like a cop out doesn't it. Did I mention it's a simple script? One thing you might want to play with right away are fills having red and green, and lime and fuchsia. It would be cool to reduce it all down to two (2) colors, but all the boolean relations might have to be listed, and it also may not be possible to cumulatively combine transparency overlays of the same value. Visually, that approach may not result to awaken a useful feature anyway. Also, fill() has its limitations in that it cannot be in a local scope; this includes function wrapped calls to fill(), or calls made using branching logic statements if/elseif, iff(), and var = (cond) ? t_val/exp : f_val/exp. So, to my knowledge, a fill() can not be made to be logically on/off. Please, enjoy getting some use out of it.
Indicador Pine Script®
por latticephreak