Empiece

Patrones de gráficos

USDJPY MA Zone Entry Strategy USD/JPY tested only.A consistent strategy that gives me alerts each time my conditions are met. I am a funded prop firm trader. this strategy gives 45-70% annual returns. the sequence for this strategy is: After 4 stop loss hits, place a trade on the NEXT ENTRY ALERT ONCE: (-.188) pips draw back towards the stop loss. (this turns the Strat from 1-3 RISK/REWARD to 1-7+ RISK/REWARD). keep the Stop Loss the same (-.300) away from your entry. Take Profit placed at (+1.488) from entry. if 3 losses in a row happens AFTER you've followed these instructions, don't trade again UNTIL the strategy has a TAKE PROFIT gain, then the sequence starts over again. that is this strategies losing streak. after that streak is over. the strategy will be back to give you profits.
Estrategia Pine Script®
por theprocess223
TEMA 20/34/55 Strategie mit Buy & SellThis indicator uses three Triple Exponential Moving Averages (TEMA) with periods 20 (green), 34 (blue), and 55 (red) to identify trend direction. A buy signal is generated when TEMA20 crosses above TEMA34 and TEMA34 crosses above TEMA55 (bullish trend start). A sell signal is generated when TEMA20 crosses below TEMA34 and TEMA34 crosses below TEMA55 (bearish trend start). The strategy enters long and short positions with configurable stop loss and take profit levels. Ideal for trend following and suitable for intraday or swing trading.
Estrategia Pine Script®
por Keulemr
D Money – EMA/TEMA Touch Strategy (Distance) What it’s trying to capture You want mean-reversion “tags” back to a moving average after price has stretched away and momentum flips: Bearish setup (short): price has been above EMA(9) for a few bars, then MACD turns bearish, and price is far enough above the EMA (by an adaptive threshold). Exit when price tags the EMA. Bullish setup (long): price has been below your chosen TEMA rail (actually an EMA of 50/100/200 you pick) for a few bars, then MACD turns bullish, and price is far enough below that TEMA. Exit when price tags that TEMA. The moving averages it uses EMA(9) — your fast “tag” for short take-profits. “TEMA line” input = one of EMA(50) / EMA(100) / EMA(200). (Labelled “Chosen TEMA” in the plot; it’s an EMA rail you pick.) When it will enter trades It requires four things per side: Short (EMA-Touch Short) MACD bearish cross on the signal bar If “Require NO MA touch on cross bar” = true, the bar’s low must be above EMA(9), so it didn’t touch EMA on the cross bar (fake-out guard). Extension/Context: you’ve had at least barsAbove consecutive closes above EMA(9) (default 3), so it’s truly stretched. Distance test: absolute % distance from price to EMA(9) must be ≥ minDistEMA_eff (an adaptive threshold; details below). Bounce filter: there was no bullish bounce off the EMA in the last bounceLookback bars (excluding the current one). If all pass and you’re inside the backtest window → strategy.entry short. Long (TEMA-Touch Long) MACD bullish cross on the signal bar With the same fake-out guard: the bar’s high must be below the chosen TEMA if the guard is on. Extension/Context: at least barsAbove consecutive closes below the chosen TEMA. Distance test: absolute % distance from price to TEMA must be ≥ minDistTEMA_eff (adaptive). Bounce filter: there was no bearish bounce off the TEMA in the last bounceLookback bars. If all pass and you’re in the window → strategy.entry long. MACD timing option: If Pure MACD Timing = ON, it only checks for the cross. If OFF (default), it also enforces “no touch on the cross bar” if that checkbox is true. That’s your “fake-out” filter. The adaptive distance threshold (the “secret sauce”) You can choose how “far enough away” is determined—per side: Fixed % Short uses Fixed: Min distance ABOVE EMA (%) Long uses Fixed: Min distance BELOW TEMA (%) Auto (ATR%) (default) Short threshold = max(floorEMA, kAtrShort × ATR%) Long threshold = max(floorTEMA, kAtrLong × ATR%) This scales distance by recent volatility, with a floor. Auto (AvgDist%) Short threshold = max(floorEMA, kAvgShort × average(|Dist to EMA|) over avgLen) Long threshold = max(floorTEMA, kAvgLong × average(|Dist to TEMA|) over avgLen) This adapts to the instrument’s typical stretch away from the rails. These become minDistEMA_eff and minDistTEMA_eff and are re-computed each bar. Fake-out / bounce logic (the “don’t get tricked” part) A touch means the bar’s high/low overlapped the MA ± a small buffer % (touchBufPct). A bounce is a touch plus a close on the “wrong” side (e.g., touch EMA and close above it on shorts = bullish bounce). The script blocks entries if a bounce happened within bounceLookback bars (excluding the current signal bar). Exits & risk Take profit: when price touches the target MA: Short TP = touch EMA(9) Long TP = touch chosen TEMA Stop loss: either ATR stop: entry ± (atrMultStop × ATR) (default ON), or Percent stop: entry × (1±stopPct%) Time stop: if timeExitBars > 0, close after that many bars if still open. Quality-of-life features Backtest window (btFrom, btTo) so you can limit evaluation. Labels on signal bars that show: MACD bucket (Small/Moderate/HUGE/Violent — based on % separation on the bar), the current absolute distance to the target MA, and the effective minimum the engine used (plus which engine mode). Data Window fields so you can audit: abs distance to EMA/TEMA, the effective min distance used on each side, ATR%, average absolute distances (for the AvgDist mode). Alerts fire when a short/long signal is confirmed. Optional debug panel to see the exact booleans & thresholds the bar had. Quick mental model Are we properly stretched away from the rail (by an adaptive threshold) and held on that side for a few bars? Did MACD flip the way we want without price already tagging the rail that bar? Have we avoided recent bounces off that rail (no fake-out)? → If yes, enter and aim for a tag back to the rail, with ATR/% stop and optional time stop. If you want, I can add a simple on-chart “rating” (0–100) similar to your Python scorer (distance beyond min, MACD bucket, extension streak) so you can visually rank signals in TradingView too.
Estrategia Pine Script®
por dareolowoniyi
Quantum Flux Universal Strategy Summary in one paragraph Quantum Flux Universal is a regime switching strategy for stocks, ETFs, index futures, major FX pairs, and liquid crypto on intraday and swing timeframes. It helps you act only when the normalized core signal and its guide agree on direction. It is original because the engine fuses three adaptive drivers into the smoothing gains itself. Directional intensity is measured with binary entropy, path efficiency shapes trend quality, and a volatility squash preserves contrast. Add it to a clean chart, watch the polarity lane and background, and trade from positive or negative alignment. For conservative workflows use on bar close in the alert settings when you add alerts in a later version. Scope and intent • Markets. Large cap equities and ETFs. Index futures. Major FX pairs. Liquid crypto • Timeframes. One minute to daily • Default demo used in the publication. QQQ on one hour • Purpose. Provide a robust and portable way to detect when momentum and confirmation align, while dampening chop and preserving turns • Limits. This is a strategy. Orders are simulated on standard candles only Originality and usefulness • Unique concept or fusion. The novelty sits in the gain map. Instead of gating separate indicators, the model mixes three drivers into the adaptive gains that power two one pole filters. Directional entropy measures how one sided recent movement has been. Kaufman style path efficiency scores how direct the path has been. A volatility squash stabilizes step size. The drivers are blended into the gains with visible inputs for strength, windows, and clamps. • What failure mode it addresses. False starts in chop and whipsaw after fast spikes. Efficiency and the squash reduce over reaction in noise. • Testability. Every component has an input. You can lengthen or shorten each window and change the normalization mode. The polarity plot and background provide a direct readout of state. • Portable yardstick. The core is normalized with three options. Z score, percent rank mapped to a symmetric range, and MAD based Z score. Clamp bounds define the effective unit so context transfers across symbols. Method overview in plain language The strategy computes two smoothed tracks from the chart price source. The fast track and the slow track use gains that are not fixed. Each gain is modulated by three drivers. A driver for directional intensity, a driver for path efficiency, and a driver for volatility. The difference between the fast and the slow tracks forms the raw flux. A small phase assist reduces lag by subtracting a portion of the delayed value. The flux is then normalized. A guide line is an EMA of a small lead on the flux. When the flux and its guide are both above zero, the polarity is positive. When both are below zero, the polarity is negative. Polarity changes create the trade direction. Base measures • Return basis. The step is the change in the chosen price source. Its absolute value feeds the volatility estimate. Mean absolute step over the window gives a stable scale. • Efficiency basis. The ratio of net move to the sum of absolute step over the window gives a value between zero and one. High values mean trend quality. Low values mean chop. • Intensity basis. The fraction of up moves over the window plugs into binary entropy. Intensity is one minus entropy, which maps to zero in uncertainty and one in very one sided moves. Components • Directional Intensity. Measures how one sided recent bars have been. Smoothed with RMA. More intensity increases the gain and makes the fast and slow tracks react sooner. • Path Efficiency. Measures the straightness of the price path. A gamma input shapes the curve so you can make trend quality count more or less. Higher efficiency lifts the gain in clean trends. • Volatility Squash. Normalizes the absolute step with Z score then pushes it through an arctangent squash. This caps the effect of spikes so they do not dominate the response. • Normalizer. Three modes. Z score for familiar units, percent rank for a robust monotone map to a symmetric range, and MAD based Z for outlier resistance. • Guide Line. EMA of the flux with a small lead term that counteracts lag without heavy overshoot. Fusion rule • Weighted sum of the three drivers with fixed weights visible in the code comments. Intensity has fifty percent weight. Efficiency thirty percent. Volatility twenty percent. • The blend power input scales the driver mix. Zero means fixed spans. One means full driver control. • Minimum and maximum gain clamps bound the adaptive gain. This protects stability in quiet or violent regimes. Signal rule • Long suggestion appears when flux and guide are both above zero. That sets polarity to plus one. • Short suggestion appears when flux and guide are both below zero. That sets polarity to minus one. • When polarity flips from plus to minus, the strategy closes any long and enters a short. • When flux crosses above the guide, the strategy closes any short. What you will see on the chart • White polarity plot around the zero line • A dotted reference line at zero named Zen • Green background tint for positive polarity and red background tint for negative polarity • Strategy long and short markers placed by the TradingView engine at entry and at close conditions • No table in this version to keep the visual clean and portable Inputs with guidance Setup • Price source. Default ohlc4. Stable for noisy symbols. • Fast span. Typical range 6 to 24. Raising it slows the fast track and can reduce churn. Lowering it makes entries more reactive. • Slow span. Typical range 20 to 60. Raising it lengthens the baseline horizon. Lowering it brings the slow track closer to price. Logic • Guide span. Typical range 4 to 12. A small guide smooths without eating turns. • Blend power. Typical range 0.25 to 0.85. Raising it lets the drivers modulate gains more. Lowering it pushes behavior toward fixed EMA style smoothing. • Vol window. Typical range 20 to 80. Larger values calm the volatility driver. Smaller values adapt faster in intraday work. • Efficiency window. Typical range 10 to 60. Larger values focus on smoother trends. Smaller values react faster but accept more noise. • Efficiency gamma. Typical range 0.8 to 2.0. Above one increases contrast between clean trends and chop. Below one flattens the curve. • Min alpha multiplier. Typical range 0.30 to 0.80. Lower values increase smoothing when the mix is weak. • Max alpha multiplier. Typical range 1.2 to 3.0. Higher values shorten smoothing when the mix is strong. • Normalization window. Typical range 100 to 300. Larger values reduce drift in the baseline. • Normalization mode. Z score, percent rank, or MAD Z. Use MAD Z for outlier heavy symbols. • Clamp level. Typical range 2.0 to 4.0. Lower clamps reduce the influence of extreme runs. Filters • Efficiency filter is implicit in the gain map. Raising efficiency gamma and the efficiency window increases the preference for clean trends. • Micro versus macro relation is handled by the fast and slow spans. Increase separation for swing, reduce for scalping. • Location filter is not included in v1.0. If you need distance gates from a reference such as VWAP or a moving mean, add them before publication of a new version. Alerts • This version does not include alertcondition lines to keep the core minimal. If you prefer alerts, add names Long Polarity Up, Short Polarity Down, Exit Short on Flux Cross Up in a later version and select on bar close for conservative workflows. Strategy has been currently adapted for the QQQ asset with 30/60min timeframe. For other assets may require new optimization Properties visible in this publication • Initial capital 25000 • Base currency Default • Default order size method percent of equity with value 5 • Pyramiding 1 • Commission 0.05 percent • Slippage 10 ticks • Process orders on close ON • Bar magnifier ON • Recalculate after order is filled OFF • Calc on every tick OFF Honest limitations and failure modes • Past results do not guarantee future outcomes • Economic releases, circuit breakers, and thin books can break the assumptions behind intensity and efficiency • Gap heavy symbols may benefit from the MAD Z normalization • Very quiet regimes can reduce signal contrast. Use longer windows or higher guide span to stabilize context • Session time is the exchange time of the chart • If both stop and target can be hit in one bar, tie handling would matter. This strategy has no fixed stops or targets. It uses polarity flips for exits. If you add stops later, declare the preference Open source reuse and credits • None beyond public domain building blocks and Pine built ins such as EMA, SMA, standard deviation, RMA, and percent rank • Method and fusion are original in construction and disclosure Legal Education and research only. Not investment advice. You are responsible for your decisions. Test on historical data and in simulation before any live use. Use realistic costs. Strategy add on block Strategy notice Orders are simulated by the TradingView engine on standard candles. No request.security() calls are used. Entries and exits • Entry logic. Enter long when both the normalized flux and its guide line are above zero. Enter short when both are below zero • Exit logic. When polarity flips from plus to minus, close any long and open a short. When the flux crosses above the guide line, close any short • Risk model. No initial stop or target in v1.0. The model is a regime flipper. You can add a stop or trail in later versions if needed • Tie handling. Not applicable in this version because there are no fixed stops or targets Position sizing • Percent of equity in the Properties panel. Five percent is the default for examples. Risk per trade should not exceed five to ten percent of equity. One to two percent is a common choice Properties used on the published chart • Initial capital 25000 • Base currency Default • Default order size percent of equity with value 5 • Pyramiding 1 • Commission 0.05 percent • Slippage 10 ticks • Process orders on close ON • Bar magnifier ON • Recalculate after order is filled OFF • Calc on every tick OFF Dataset and sample size • Test window Jan 2, 2014 to Oct 16, 2025 on QQQ one hour • Trade count in sample 324 on the example chart Release notes template for future updates Version 1.1. • Add alertcondition lines for long, short, and exit short • Add optional table with component readouts • Add optional stop model with a distance unit expressed as ATR or a percent of price Notes. Backward compatibility Yes. Inputs migrated Yes.
Estrategia Pine Script®
por exlux
Multi-GPS (Long Only, with Alert Mode)A guided long‑only strategy with built‑in risk controls and smart alerts — your GPS for trend trading **Multi‑GPS (Long Only, with Alert Mode)** The Multi‑GPS strategy is built to help traders navigate trends with a structured, risk‑managed approach. It focuses exclusively on **long opportunities**, combining multiple moving‑average signals with layered risk controls to keep trades disciplined and consistent. Key features include: - **Dynamic trade management** with stop loss, take profit, and trailing stop options (all adjustable by percentage). - **Flexible order sizing**, allowing positions to scale as a percentage of account equity. - **Customizable moving averages** (SMA or EMA) and timeframe selection to adapt to different markets and styles. - **Integrated alerts** with multiple modes, so traders can choose between order‑based notifications, alert() calls, or both. - **Clear chart visuals**, including entry/exit markers and plotted guide lines for transparency. This strategy is designed to act like a **navigation system for trend trading** — guiding entries, managing exits, and keeping risk under control, all while maintaining a clean and intuitive charting experience. --- Would you like me to also craft a **short tagline version** (like a one‑liner hook) for this strategy, so it pairs neatly with the longer description when you publish it?
Estrategia Pine Script®
por forexreward
Pump-Smart Shorting StrategyThis strategy is built to keep your portfolio hedged as much as possible while maximizing profitability. Shorts are opened after pumps cool off and on new highs (when safe), and closed quickly during strong upward moves or if stop loss/profit targets are hit. It uses visual overlays to clearly show when hedging is on, off, or blocked due to momentum, ensuring you’re protected in most market conditions but never short against the pump. Fast re-entry keeps the hedge active with minimal downtime. Pump Detection: RSI (Relative Strength Index): Calculated over a custom period (default 14 bars). If RSI rises above a threshold (default 70), the strategy considers the market to be in a pump (strong upward momentum). Volume Spike: The current volume is compared to a 20-bar simple moving average of volume. If it exceeds the average by 1.5× and price increases at least 5% in one bar, pump conditions are triggered. Price Jump: Measured by (close - close ) / close . A single-bar change > 5% helps confirm rapid momentum. Pump Zone (No Short): If any of these conditions is true, an orange or red background is shown and shorts are blocked. Cooldown and Re-Entry: Cooldown Detection: After the pump ends, RSI must fall below a set value (default ≤ 60), and either volume returns towards average or price momentum is less than half the original spike (oneBarUp <= pctUp/2). barsWait Parameter: You can specify a waiting period after cooldown before a short is allowed. Short Entry After Pump/Cooldown: When these cooldown conditions are met, and no short is active, a blue background is shown and a short position is opened at the next signal. New High Entry: Lookback New High: If the current high is greater than the highest high in the last N bars (default 20), and pump is NOT active, a short can be opened. Take Profit (TP) & Stop Loss (SL): Take Profit: Short is closed if price falls to a threshold below the entry (minProfitPerc, default 2%). Stop Loss: Short is closed if price rises to a threshold above the entry (stopLossPerc, default 6%). Preemptive Exit: Any time a pump is detected while a short position is open, the strategy closes the short immediately to avoid losses. Visual Feedback: Orange Background: Market is pumping, do not short. Red Background: Other conditions block shorts (cooldown or waiting). Blue Background: Shorts allowed. Triangles/Circles: Mark entries, pump start/end, for clear trading signals.
Estrategia Pine Script®
por ValentinMihov
Gaussian MACD RSI v2Gaussian Filter MACD Strategy (Zero Cross + RSI Gate) What it does This strategy evaluates momentum using a Gaussian-smoothed MACD and requires a MACD zero-line cross to confirm trend initiation. A configurable RSI threshold filters weak signals, aiming to reduce whipsaws around the zero line. Entries occur only when momentum and baseline strength agree; exits are triggered by MACD crossing below its signal to capture the meat of the move while avoiding discretionary overrides. How it works (concepts, not code) Gaussian MACD: The fast/slow components are smoothed with a Gaussian-style filter to reduce noise relative to standard EMA MACD. Zero-line confirmation: Longs require MACD to cross above zero, aligning entries with positive momentum regimes. RSI gate: A threshold (default 50) further filters entries so that only setups with baseline strength qualify. Exit logic: Positions close when MACD crosses below its signal line, providing an objective exit without trailing logic. Sources: The script supports standard and Heikin-Ashi-derived sources for traders who prefer alternate preprocessing. How to use it Add the strategy to a clean chart. Keep default settings for initial testing; then adjust the RSI threshold and symbol/timeframe for your market. Favor liquid instruments where slippage and fills are reliable. Forward-test and walk-forward before any live use. Default Properties (used for this publication) Initial Capital: $25,000 Order Size: 100% of equity per trade (no leverage). Commission: 0.02% per side. Slippage: 2 ticks (or 0.02% on percent-based markets). Timeframe used for the published chart: 15-minute (example) Dataset: SPY/QQQ/large-cap equities (2+ years) producing 100+ trades in sample. Note: This strategy does not use hard stops by default. If you prefer risk caps ≤ 5–10% per trade, add a stop in the Inputs and re-publish; otherwise, this description explains the deviation per House Rules. Disclosures Backtest results are estimates; real-world fills, slippage, and availability may differ. No guarantee of performance. Use prudent position sizing and independent verification.
Estrategia Pine Script®
por pjmauldin
1
4hr / BTCBTCUSDT.P / 4hr 趨勢線交易策略 設定可以如我圖表 也可以自己找合適的 測試請用最大虧損的三倍金額下去打 圖以含手續費(0.06%) 可以用小金額去打 最大淨利與最大虧損績效比 1:10 平均獲利/虧損盈虧比 2.135 長期放保證獲利 沒獲利或獲利較小的那年通常是大事件 如2022 有問題私訊 謝謝 BTCUSDT.P / 4hr Trendline Trading Strategy You can set it up the same way as shown on my chart, or find your own suitable setup. For testing, please use three times the maximum loss as your trading capital. The chart should include fees (0.06%). You can trade with a small amount. Performance: Maximum profit to maximum loss ratio: 1:10 Average profit/loss ratio: 2.135 Guaranteed profit in the long term Years with no profit or smaller profit are usually caused by major events, such as 2022. If you have any questions, please DM me. Thank you.
Estrategia Pine Script®
por zxc3132762
LW Outside Day Strategy[SpeculationLab]This strategy is inspired by the “Outside Day” concept introduced by Larry Williams in Long-Term Secrets to Short-Term Trading, and has been extended with configurable risk management tools and realistic backtesting parameters. Concept The “Outside Day” is a classic price action pattern that reflects strong market rejection or continuation pressure. An Outside Bar occurs when the current bar’s high exceeds the previous high and the low falls below the previous low. A body-size filter ensures only significant candles are included. Entry Logic Buy setup: Price closes below the previous low (bullish rejection). Sell setup: Price closes above the previous high (bearish rejection). Only confirmed bars are used (no intrabar signals). Stop-Loss Modes Prev Low/High: Uses the previous swing point ± ATR-based buffer. ATR: Dynamic stop based on Average True Range × multiplier. Fixed Pips: User-defined fixed distance (for forex testing). Take-Profit Modes Prev High/Low (PHL): Exits near the opposite swing. Risk-Reward (RR): Targets a user-defined multiple of the stop distance (default = 2 : 1). Following Price Open (FPO): Exits on the next bar’s open if price opens in profit (used to test overnight price continuation). Risk Management & Backtest Settings Default risk per trade is set at 10% of account equity (user-adjustable). Commission = 0.1% and slippage = 2 ticks are applied to simulate realistic conditions. For reliable statistics, test on data that yields over 100 trades. Suitable for daily and 4-hour timeframes across stocks, forex, and crypto markets. Visual Elements Green and red triangles show entry signals. Stop-loss (red) and take-profit (green) reference lines are drawn for clarity. Optional alerts notify when a valid setup forms. Disclaimer This script is for educational and research purposes only. It does not constitute financial advice or guarantee profits. Always backtest thoroughly and manage your own risk. Enhancements over Classic Outside Bar Models Adjustable stop and target logic with ATR and buffer multipliers. “Following Price Open” exit logic for realistic day-end management. Optimized to avoid repainting and bar-confirmation issues. Built with realistic trading costs and position sizing. 策略逻辑 外包线识别 当日最高价高于前一日最高价，且当日最低价低于前一日最低价，即形成外包线。 同时过滤掉较小实体的 K 线，仅保留实体显著大于前一根的形态。 方向过滤 收盘价低于前一日最低价 → 视为买入信号。 收盘价高于前一日最高价 → 视为卖出信号。 止损设置（可选参数） 前低/高止损：以形态前低/前高为止损，带有缓冲倍数。 ATR 止损：根据平均波动率（ATR）动态调整。 固定点数止损：按照用户设定的点数作为止损范围。 止盈设置（可选参数） 前高/低止盈（PHL）：以前高/前低为目标。 固定盈亏比（RR）：根据用户设定的风险回报比自动计算。 隔夜开盘（FPO）：若次日开盘价高于进场价（多单）或低于进场价（空单），则平仓。 信号标记 在图表中标注买入/卖出信号（三角形标记）。 绘制止损与目标位参考线。 使用说明 适用周期：建议用于 日线图（Daily）。 适用市场：股票、外汇、加密货币等各类市场均可。 提示：此策略为历史研究与学习用途，不构成投资建议。实际交易请结合自身风险管理。
Estrategia Pine Script®
por SpeculationLab
Larry Williams Oops StrategyThis strategy is a modern take on Larry Williams’ classic Oops setup. It trades intraday while referencing daily bars to detect opening gaps and align entries with the prior day’s direction. Risk is managed with day-based stops, and—unlike the original—all positions are closed at the end of the session (or at the last bar’s close), not at a fixed profit target or the first profitable open. Entry Rules Long setup (bullish reversion): Today opens below yesterday’s low (down gap) and yesterday’s candle was bearish. Place a buy stop at yesterday’s low + Filter (ticks). Short setup (bearish reversion): Today opens above yesterday’s high (up gap) and yesterday’s candle was bullish. Place a sell stop at yesterday’s high − Filter (ticks). Longs are only taken on down-gap days; shorts only on up-gap days. Protective Stop If long, stop loss trails the current day’s low. If short, stop loss trails the current day’s high. Exit Logic Positions are force-closed at the end of the session (in the last bar), ensuring no overnight exposure. There is no take-profit; only stop loss or end-of-day flat. Notes This strategy is designed for intraday charts (minutes/seconds) using daily data for gaps and prior-day direction. Longs/shorts can be enabled or disabled independently.
Estrategia Pine Script®
por xtradernet
1
Larry Williams Bonus Track PatternThis strategy trades the day immediately following an Inside Day, under specific directional and timing conditions. It is designed for daily-based setups but executed on intraday charts to ensure orders are placed exactly at the open of the following day, rather than at the daily bar close. Entry Conditions Only trades on Monday, Thursday, or Friday. The previous day must be an Inside Day (its high is lower than the prior high and its low is higher than the prior low). The bar before the Inside Day must be bullish (close > open). On the following day (t): The daily open must be below both the Inside Day’s high and the highest high of the two days before that. A buy stop is placed at the highest high of the three previous days (Inside Day and the two days before it). If the new day’s open is already above that level (gap up), the strategy enters long immediately at the open. Exit Rules Stop Loss: Fixed, defined in points or percentage (user input). FPO (First Profitable Open): the position is closed at the first daily open after the entry day where the open price is above the average entry price (the first profitable open). Notes The script must be applied on an intraday timeframe (e.g., 15-minute or 1-hour) so that the strategy can: Detect the Inside Day pattern using daily data (request.security). Execute orders in real time at the next day’s open. Running it directly on the daily timeframe will delay executions by one bar due to Pine Script’s evaluation model.
Estrategia Pine Script®
por xtradernet
ORDER BLCOK custom strategy# OB Matrix Strategy - Documentation **Version:** 1.0 **Author:** HPotter **Date:** 31/07/2017 The **OB Matrix Strategy** is based on the identification of **bullish and bearish Order Blocks** and the management of conditional orders with multiple Take Profit (TP) and Stop Loss (SL) levels. It uses trend filters, ATR, and percentage-based risk management. --- ## 1. Main Parameters ### Strategy - `initial_capital`: 50 - `default_qty_type`: percentage of capital - `default_qty_value`: 10 ### Money Management - `rr_threshold`: minimum Risk/Reward threshold to open a trade - `risk_percent`: percentage of capital to risk per trade (default 2%) - `maxPendingBars`: maximum number of bars for a pending order - `maxBarsOpen`: maximum number of bars for an open position - `qty_tp1`, `qty_tp2`, `qty_tp3`: quantity percentages for multiple TPs --- ## 2. Order Block Identification ### Order Block Parameters - `obLookback`: number of bars to identify an Order Block - `obmode`: method to calculate the block (`Full` or `Breadth`) - `obmiti`: method to determine block mitigation (`Close`, `Wick`, `Avg`) - `obMaxBlocks`: maximum number of Order Blocks displayed ### Main Variables - `bullBlocks`: array of bullish blocks - `bearBlocks`: array of bearish blocks - `last_bull_volume`, `last_bear_volume`: volume of the last block - `dom_block`: dominant block type (Bullish/Bearish/None) - `block_strength`: block strength (normalized volume) - `price_distance`: distance between current price and nearest block --- ## 3. Visual Parameters - `Width`: line thickness for swing high/low - `amountOfBoxes`: block grid segments - `showBorder`: show block borders - `borderWidth`: width of block borders - `showVolume`: display volume inside blocks - `volumePosition`: vertical position of volume text Customizable colors: - `obHighVolumeColor`, `obLowVolumeColor`, `obBearHighVolumeColor`, `obBearLowVolumeColor` - `obBullBorderColor`, `obBearBorderColor` - `obBullFillColor`, `obBearFillColor` - `volumeTextColor` --- ## 4. Screener Table - `showScreener`: display the screener table - `tablePosition`: table position (`Top Left`, `Top Right`, `Bottom Left`, `Bottom Right`) - `tableSize`: table size (`Small`, `Normal`, `Large`) The table shows: - Symbol, Timeframe - Type and status of Order Block - Number of retests - Bullish and bearish volumes --- ## 5. Trend Filters - EMA as a trend filter (`emaPeriod`, default 223) - `bullishTrend` if close > EMA - `bearishTrend` if close < EMA --- ## 6. ATR and Swing Points - ATR calculated with a customizable period (`atrLength`) - Swing High/Low for SL/TP calculation - `f_getSwingTargets` function to calculate SL and TP based on direction --- ## 7. Trade Logic ### Buy Limit on Bullish OB - Conditions: - New bullish block - Uptrend - RR > threshold (`rr_threshold`) - SL: `bullishOBPrice * (1 - atr * atrMultiplier)` - Multiple TPs: TP1 (50%), TP2 (80%), TP3 (100% max) - Quantity calculation based on percentage risk ### Sell Limit on Bearish OB - Conditions: - New bearish block - Downtrend - RR > threshold (`rr_threshold`) - SL: `bearishOBPrice * (1 + atr * atrMultiplier)` - Multiple TPs: TP1 (50%), TP2 (80%), TP3 (100% max) - Quantity calculation based on percentage risk --- ## 8. Order Management and Timeout - Close pending orders after `maxPendingBars` bars - Close open positions after `maxBarsOpen` bars - Label management for open orders --- ## 9. Alert Conditions - `bull_touch`: price inside maximum bullish volume zone - `bear_touch`: price inside maximum bearish volume zone - `bull_reject`: confirmation of bullish zone rejection - `bear_reject`: confirmation of bearish zone rejection - `new_bull`: new bullish block - `new_bear`: new bearish block --- ## 10. Level Calculation - Swing levels based on selected timeframe (`SelectPeriod`) - `xHigh` and `xLow` for S1 and R1 calculation - Levels plotted on chart --- ## 11. Take Profit / Stop Loss - Extended horizontal lines (`extendBars`) to visualize TP and SL - Customizable colors (`tpColor`, `slColor`) --- ## 12. Notes - Complete script based on Pine Script v5 - Advanced graphical management with boxes, lines, labels - Dynamically displays volumes and Order Blocks - Integrated internal screener --- ### End of Documentation
Estrategia Pine Script®
por CRYPTO_EWT
Camarilla Pivots + 20 EMA StrategyThis is an intraday volatility and trend-following system for commodities like Natural Gas, combining dynamic pivot levels (Camarilla) with a trend filter (20-period EMA) to improve risk-reward and reduce false breakouts. Core Components 1. Camarilla Pivots: These are special support and resistance levels (H3, H4, L3, L4) calculated each day based on the previous day's high, low, and close. The pivots adapt to daily volatility, giving more relevant breakout and bounce zones than static lines. H4: Aggressive resistance (used for breakout LONG entry) H3: Moderate resistance/support (used for bounce or stoploss) L4: Aggressive support (used for breakout SHORT entry) L3: Moderate support/resistance (used for bounce or stoploss) 2. 20 EMA (Exponential Moving Average): Plotted on the 30-minute chart, this acts as a trend filter. If the price is above 20 EMA: Only look for long trades (bullish bias). If below 20 EMA: Only look for short trades (bearish bias). How the Strategy Works Setup (30-Min Chart): Camarilla pivots for the day are drawn on the chart. 20 EMA is also plotted. Trade Filter: Bullish: Trade ONLY if price is above 20 EMA. Bearish: Trade ONLY if price is below 20 EMA. Entry: LONG: Enter when price breaks and closes above the H4 pivot AND is above 20 EMA. SHORT: Enter when price breaks and closes below the L4 pivot AND is below 20 EMA. Stop Loss: LONG: Place stoploss at H3 (the next lower Camarilla resistance). SHORT: Place stoploss at L3 (the next higher Camarilla support). Target: Always set a profit target at 2x the distance (risk) between entry and stoploss (strict R:R 2). For example, if your entry is at H4 and stoploss at H3, your target is entry + 2*(entry - stoploss). Alerts & Visuals: The strategy plots entry arrows, stoploss and target lines for immediate visual reference. Alerts trigger on breakout signals so you never miss a trade. Why This Works Well for Natural Gas Adapts to volatility: The pivots change daily, handling wide-ranging and choppy price moves better than fixed breakouts. Trend filter: EMA prevents counter-trend whipsaws, only trades with market momentum. Risk control: Every trade must meet strict risk-reward criteria, so losses are contained and winners can outweigh losers.
Estrategia Pine Script®
por vinaygaur97
SHALOM TRADING HUB – Bollinger Band SystemSHALOM TRADING HUB – Bollinger Band System (Strategy) All-in-one BB system with both Breakout and Mean-Reversion modes. Automatic ENTRY / EXIT / STOP-LOSS, optional Mid-Band Exit, ATR or % risk, and built-in alerts. Backtest-ready. What it does Bollinger Bands: Basis = SMA(length); Upper/Lower = ±(mult × StDev). Signals Breakout mode LONG → price crosses above Upper SHORT → price crosses below Lower Mean-Reversion mode LONG → price re-enters above Lower SHORT → price re-enters below Upper Risk / Exits ATR mode: SL = ATR × Mult, TP = SL × Risk:Reward % mode: SL = %Stop, TP = %Take Profit Optional Mid-Band (Basis) cross exit. Visuals: BB lines + active Entry / SL / TP overlays + last-bar price labels. Alerts: Breakout / Mean-Reversion signals and TP/SL hits. Inputs (Settings) Source, Length, Multiplier – BB calculation. Signal Mode – Breakout or Mean Reversion. Use ATR Stop/Target? – On = ATR; Off = %. ATR Length, ATR Mult (SL), Risk:Reward (TP) % Stop, % Take Profit (when ATR is Off) Also exit on Mid-Band cross? – On/Off. Alerts only on bar close? – Filters to confirmed bars. Entry / Exit / Stop Entry: Auto when the chosen signal condition triggers. Stop-Loss: Placed from ATR or % settings. Take-Profit: Set by R:R or % settings. Mid-Band Exit (optional): LONG → exit if close < Basis SHORT → exit if close > Basis Alerts (How-to) Add the strategy to the chart → click Alerts (⚠️). Condition: “SHALOM BB System” → choose: BB Breakout LONG / SHORT BB Mean-Reversion LONG / SHORT Long TP Hit / Long SL Hit / Short TP Hit / Short SL Hit Choose Once per bar or Once per bar close. Backtest Tips Match timeframe to your instrument. Tune ATR/Mult, R:R, % to volatility. Session filter (e.g., 09:20–15:20 IST) can be added easily in code. Default pyramiding = 0; raise if you want multiple entries.
Estrategia Pine Script®
por sharemanreport