Candlestick analysis
Candle Body Break (M/W/D/4H/1H)v5# Candle Body Break (M/W/D/4H/1H) Multi-Timeframe Indicator
This indicator identifies and plots **Candle Body Breaks** across five key timeframes: Monthly (M), Weekly (W), Daily (D), 4-Hour (4H), and 1-Hour (1H).
## Core Logic: Candle Body Break
The core concept is a break in the swing high/low defined by the body of the previous counter-trend candle(s). It focuses purely on **closing price breaks** of remembered highs/lows established by full candle bodies (close > open or close < open).
1. **Remembering the Swing:**
* After a bullish break (upward trend), the indicator waits for the first **bearish (close < open) candle** to appear. This bearish candle's high (`rememberedHigh`) and low (`rememberedLow`) are saved as the **breakout level**.
* Subsequent bearish candles that make a new low update this saved level, continuously adjusting the level to the most significant recent resistance/support established by the body's range.
2. **Executing the Break:**
* **Bull Break (Long signal):** Occurs when a **bullish candle's closing price** exceeds the last remembered bearish high (`rememberedHigh`).
* **Bear Break (Short signal):** Occurs when a **bearish candle's closing price** falls below the last remembered bullish low (`rememberedLow_Bull`).
Once a break occurs, the memory is cleared, and the indicator waits for the next counter-trend candle to establish a new level.
## Features
* **Multi-Timeframe Analysis:** Displays break lines and labels for M, W, D, 4H, and 1H timeframes on any chart.
* **Timeframe Filtering:** Break lines are only shown for timeframes **equal to or higher** than the current chart timeframe (e.g., on a 4H chart, only 4H, D, W, and M breaks are displayed).
* **Candidate Lines (Dotted Green):** Plots the current potential breakout level (the remembered high/low) that must be broken to trigger the next signal.
* **Direction Table:** A table in the top right corner summarizes the latest break direction (⇧ Up / ⇩ Down) for all five timeframes. This can be optionally limited to the 4H chart only.
* **1H Alert:** Triggers an alert when a 1-Hour break is detected.
## Input Settings Translation (for Mod Compliance)
| English Input Text | Original Japanese Text |
| :--- | :--- |
| **Show Monthly Break Lines** | 月足ブレイクを描画する |
| **Show Weekly Break Lines** | 週足ブレイクを描画する |
| **Show Daily Break Lines** | 日足ブレイクを描画する |
| **Show 4-Hour Break Lines** | 4時間足ブレイクを描画する |
| **Show 1-Hour Break Lines** | 1時間足ブレイクを描画する |
| **Show Monthly Candidate Lines** | 月足ブレイク候補ラインを描画する |
| **Show Weekly Candidate Lines** | 週足ブレイク候補ラインを描画する |
| **Show Daily Candidate Lines** | 日足ブレイク候補ラインを描画する |
| **Show 4-Hour Candidate Lines** | 4時間足ブレイク候補ラインを描画する |
| **Show 1-Hour Candidate Lines** | 1時間足ブレイク候補ラインを描画する |
| **Show Only Current TF Candidate Lines** | チャート時間足の候補ラインのみ表示 |
| **Show Table Only on 4H Chart** | テーブルを4Hチャートのみ表示 |
*Please note: The default alert message "1-Hour Break Detected" is also in English.*
※日本語訳
ろうそく足実体ブレイク(M/W/D/4H/1H)マルチタイムフレーム・インジケーター(日本語訳)
このインジケーターは、月足(M)、週足(W)、日足(D)、4時間足(4H)、1時間足(1H)の5つの主要な時間足におけるろうそく足実体ブレイクを検出し、プロットします。
コアロジック:ろうそく足実体ブレイク
このロジックの中核は、直近の**逆行ろうそく足(カウンター・トレンド・キャンドル)**の実体によって定義されたスイングの高値/安値のブレイクです。終値が実体のレンジ外で確定することを純粋に追跡します。
スイングの記憶(Remembering the Swing):
強気のブレイク(上昇トレンド)の後、インジケーターは最初に現れる弱気(終値<始値)のろうそく足を待ちます。この弱気ろうそく足の高値(rememberedHigh)と安値(rememberedLow)が、ブレイクアウトレベルとして保存されます。
その後、安値を更新する弱気ろうそく足が続いた場合、この保存されたレベルが更新され、実体のレンジによって確立された最新の重要なレジスタンス/サポートにレベルが継続的に調整されます。
ブレイクの実行(Executing the Break):
ブルブレイク(買いシグナル): 最後に記憶された弱気ろうそく足の高値(rememberedHigh)を、強気ろうそく足の終値が上回ったときに発生します。
ベアブレイク(売りシグナル): 最後に記憶された強気ろうそく足の安値(rememberedLow_Bull)を、弱気ろうそく足の終値が下回ったときに発生します。
一度ブレイクが発生すると、記憶されたレベルはクリアされ、インジケーターは次の逆行ろうそく足が出現し、新しいレベルを確立するのを待ちます。
機能
マルチタイムフレーム分析: 現在のチャートの時間足に関わらず、M、W、D、4H、1Hのブレイクラインとラベルを表示します。
時間足フィルタリング: ブレイクラインは、現在のチャート時間足と同じか、それよりも上位の時間足のもののみが表示されます(例:4時間足チャートでは、4H、D、W、Mのブレイクのみが表示されます)。
候補ライン(緑の点線): 次のシグナルをトリガーするためにブレイクされる必要がある、現在の潜在的なブレイクアウトレベル(記憶された高値/安値)をプロットします。
方向テーブル: 右上隅のテーブルに、5つの全時間足の最新のブレイク方向(⇧ 上昇 / ⇩ 下降)をまとめて表示します。これは、オプションで4時間足チャートのみに表示するように制限できます。
1時間足アラート: 1時間足のブレイクが検出されたときにアラートをトリガーします。
入力設定の翻訳
コード内の入力設定(UIテキスト)の日本語訳は以下の通りです。
英語の入力テキスト 日本語訳
Show Monthly Break Lines 月足ブレイクを描画する
Show Weekly Break Lines 週足ブレイクを描画する
Show Daily Break Lines 日足ブレイクを描画する
Show 4-Hour Break Lines 4時間足ブレイクを描画する
Show 1-Hour Break Lines 1時間足ブレイクを描画する
Show Monthly Candidate Lines 月足ブレイク候補ラインを描画する
Show Weekly Candidate Lines 週足ブレイク候補ラインを描画する
Show Daily Candidate Lines 日足ブレイク候補ラインを描画する
Show 4-Hour Candidate Lines 4時間足ブレイク候補ラインを描画する
Show 1-Hour Candidate Lines 1時間足ブレイク候補ラインを描画する
Show Only Current TF Candidate Lines チャート時間足の候補ラインのみ表示
Show Table Only on 4H Chart テーブルを4Hチャートのみ表示
Alert Message: 1-Hour Break Detected アラートメッセージ: 1時間足ブレイク発生
BGT TrendFlow Profit Engine V2.0 In the fast-changing financial markets, quickly and accurately identifying the best trading opportunities is a challenge every investor faces. The trading strategy tool we offer is designed to address market uncertainty and volatility, providing strong support for your investment decisions and helping you navigate the complexities of the market with ease.
Core Advantage 1: Precisely Identifying Market Trends and Capturing Optimal Trading Opportunities
Market fluctuations can be complex, and avoiding noisy signals and wrong trading decisions is crucial. Our trading strategy script, with its powerful ultimate filtering system, combines multiple market dimensions to ensure that you enter the market only at the most favorable times. This means you will have more opportunities to engage in strong trends rather than getting caught in choppy or ineffective markets.
Core Advantage 2: Automated Risk Management for Steady Returns
No matter how volatile the market is, our automated risk management system adjusts your take profit (TP) and stop loss (SL) settings based on market conditions, ensuring that you don’t miss out on long-term gains due to short-term fluctuations. Especially in highly volatile markets, we also support multiple levels of take profits (TP1, TP2, TP3), maximizing your profit while preventing unexpected market reversals from disrupting your gains.
Core Advantage 3: Precision in Capturing Reversals and Pullbacks
The market is always filled with reversal and pullback opportunities, yet many investors miss them. We offer in-depth analysis to precisely capture these pullback and reversal signals, helping you take action at the right moment and avoid missing these profitable opportunities. Even in volatile markets, you can swiftly adjust your strategy and seize every potential profit opportunity.
Core Advantage 4: Comprehensive Market Signals, Avoiding the Limitations of a Single Time Frame
Market signals can vary widely, and different timeframes often carry different meanings. We use multi-timeframe analysis to identify market trends across various time periods, avoiding the potential misguidance that comes with using a single timeframe, ensuring the strategy remains effective across changing market conditions.
Core Advantage 5: Real-Time Visualization for Easy Market Monitoring
Making quick decisions in the market relies on rapid understanding and interpretation of information. Our strategy offers powerful visualization tools that display key data such as market trend strength, entry signals, and take-profit/stop-loss targets in real time. Whether you’re an experienced trader or a beginner, you can quickly understand the current market conditions through intuitive charts and markers.
Core Advantage 6: Intelligent Filtering and Precise Alerts, Never Miss an Opportunity
We combine intelligent filtering systems to automatically select high-quality trade signals, ensuring you are not lost in a sea of chaotic market information. The built-in alert system will notify you at critical moments, allowing you to adjust your strategy as the market shifts and ensuring you never miss a trading opportunity.
Conclusion:
With these advanced features and strategies, you will no longer be troubled by the fast fluctuations of the market. Instead, you will be able to calmly and precisely seize every profitable opportunity. Whether you're a day trader or a long-term investor, this trading strategy script will become your trusted assistant for achieving steady profits in the financial markets.
In today’s highly competitive market, mastering advanced trading strategies and effectively managing risk is the key to achieving superior returns.
Multi-Stochastic Alert Indicator - INSTANTits amazing to read charts with this
you can ue it
to read
stochastic
timeframe
difference models
Market Tension Map v2📊 Market Tension Map v2 — Detailed Description
core concept
market tension map v2 measures market "tension" through a combination of three independent metrics: volatility, volume, and open interest changes. the indicator operates on the compressed spring principle—when the market enters a state of low volatility with high volume and growing OI, it creates "tension" that predicts a potential sharp price movement.
calculation methodology
component 1: volatility score (0-100)
relative volatility is measured through price standard deviation over a specified period. key distinction—inversion: low volatility produces a high score because range compression creates energy for future movement.
component 2: volume score (0-100)
normalization of current volume relative to the period range. high volume during low volatility signals accumulation of positions by large players before a move.
component 3: open interest score (0-100)
evaluation of open interest changes (available only for futures). rising OI confirms new positions entering the market rather than just redistribution of existing ones.
final tension index
arithmetic mean of three components (or two if OI unavailable). values above threshold (default 70) signal spring "compression".
signal types
compression signal (🔴 red diamond)
appears when tension index exceeds threshold with normal candle size. this is a predictive signal—market is compressed but explosion hasn't occurred yet. optimal for entry before movement with tight stop.
climax signal (⚠️ orange diamond)
occurs when threshold crossed + large candle (size > ATR × multiplier). this is a reactive signal of culmination—energy already released. often indicates short-term reversal or move exhaustion.
uniqueness of approach
unlike classic compression indicators (bollinger bands squeeze, keltner channels), mtm v2 doesn't rely solely on volatility. adding volume and OI scores creates a multidimensional picture of market microstructure. volatility score inversion is original logic where calm is interpreted as tension.
the algorithm distinguishes two breakout types:
compression without movement (compression)—anticipation trading
compression with large candle (climax)—reversal trading
this separation is absent in standard indicators.
parameter settings
calculation period (20)—normalization window length. lower = more sensitive to short-term changes.
tension threshold (70)—signal activation level. higher = fewer signals but better quality.
atr length (14) + atr multiplier (2.0)—large candle detection parameters for climax signals. increasing multiplier makes filter stricter.
colors and style—full customization of visual elements to adapt to your chart theme.
how to use
main chart: histogram shows current tension level. yellow = rising, gray = falling.
signals on price chart:
red diamond above candle = prepare for entry (compression)
orange diamond = move occurred, watch for reversal (climax)
background highlight: tinted background shows high tension zones.
data table: real-time monitoring of all components + bar status (live/closed).
alerts: configure notifications for compression or climax signals for automatic monitoring.
limitations
open interest available only for futures. for spot markets indicator works with two components.
requires sufficient bar history (>= calculation period) for correct calculations.
on live bar (not closed) values may repaint—use confirmed signals for trading.
recommended timeframes
1h-4h: optimal for swing trading, signals more reliable.
15m-30m: suitable for intraday but requires false breakout filtering.
d: strategic positions, high risk/reward ratio.
license: mozilla public license 2.0
version: pinescript v6
Nexus Aeterna - RetailNexus Aeterna is an advanced multi-mode trading framework designed for precision signal generation, risk management, and visual clarity. Built for both retail and professional traders, it integrates adaptive moving averages, dynamic stop-loss management, and contextual volume analysis to enhance trade timing and trend confirmation.
This script provides configurable layers of confirmation between trend, momentum, and volume dynamics — helping traders interpret complex market structure with ease.
⚙️ Key Features
🧠 Dual Operating Modes
Standard Mode: Balanced signal generation with trend alignment and volume context.
Scalp Mode: Lightweight and responsive for short-term trades, referencing only the Spectra MA Cloud.
🌈 Spectra Moving Average System
Adaptive multi-speed moving average suite with adjustable Reaction Speed.
Influences stop-loss placement, take-profit timing, and signal responsiveness.
🧭 Signal & Filter Controls
Macro Trend Filter: Option to align signals with long-term trend direction.
Waveform Oscillator Alignment: Filter entries based on internal momentum and volume divergence.
Final Close Check: Ensures candle confirmation before signal validation.
🎨 Visual Customization
Toggle visibility for:
MA Cloud background
Declining volume/reversal labels
Stop-loss and take-profit signals
Candle coloring by signal and volume delta alignment
Optional display of ATR and Macro Context Tables for real-time contextual awareness.
📊 Waveform Oscillator Integration
Choose a custom timeframe for CVD and oscillator analysis (from 1-minute to monthly).
Enables deeper insight into momentum transitions and divergence across timeframes.
🛑 Responsive Stop-Loss Engine
Fully tunable system including:
Candle offset responsiveness
Dynamic lookback period
Adjustable margin of error
Optional “Responsive Mode” with multipliers for tighter or looser stops
Designed to adapt to volatility and trading style.
🔔 Smart Alerts
Configurable alerts for:
Long / Short entries
Long++ / Short++ advanced confirmations
Take-Profit signals
Optimized for integration with automation platforms and TradingView alerts.
⚠️ Disclaimer
By using this indicator, you acknowledge and agree to release SmartTrade Pro LLC from any liability related to its use.
This tool is for educational and analytical purposes only.
It does not constitute financial advice.
Trading involves substantial risk — always trade responsibly and manage your own risk exposure.
💡 Intended Use
Nexus Aeterna – Retail v2.4 is ideal for:
Traders seeking adaptable market structure confirmation.
Those who combine technical, trend, and volume analysis.
Users who want a visually organized, context-aware trading toolkit.
Moderate Value Screener (NASDAQ + NYSE + TSX v6 FINAL CLEAN)Moderate Value Screener (NASDAQ + NYSE + TSX v6 FINAL CLEAN)
Porsched Indicator🔧 Core Components:
1. Moving Averages with Clouds
EMA 25, 50, 75, and 150 with standard deviation bands
Visual clouds representing volatility around each EMA
Customizable colors for each average and its cloud
2. Dual Hull Bands
Two separate Hull bands with different periods (20 and 110)
Multiple variations: HMA, THMA, EHMA
Colored filling between Hull lines
Option to use higher timeframes for multi-timeframe analysis
3. Swing High/Low Detector
Identifies significant price reversal points
Configurable swing strength (default: 5 bars)
Solid lines for current swings and dotted for past ones
Alerts when swing levels are broken
4. Volume Analysis (PVSRA)
Vector Candles that change color based on volume:
Red/Green: Volume ≥ 200% of average or highest spread×volume
Blue/Violet: Volume ≥ 150% of average
Gray: Normal conditions
Vector Candle Zones (VCZ): Key areas based on volume candles
5. Daily & Weekly Levels
Previous day's high and low
Previous week's high and low
Stepline display with optional labels
6. UT Bot - Trailing Stop
Dynamic ATR-based stop loss
Bar coloring based on trend direction
Adjustable sensitivity via "Key Value"
7. Session Detector
Identifies session highs/lows (Sydney, Asia, Europe, etc.)
Visual boxes marking each trading session
⚙️ Customization Features:
Individual color schemes for all elements
Adjustable line thickness
Custom transparency settings
Flexible calculation periods
Multiple timeframe options
🎯 Trading Applications:
Trend Identification (EMAs + Hull)
Entry/Exit Points (Swings + Volume)
Risk Management (Trailing Stop)
Support/Resistance (VCZ + Highs/Lows)
Market Timing (Sessions + Volume)
💡 Key Benefits:
All-in-One Solution: Eliminates indicator clutter
Multi-Timeframe Analysis: Built-in higher timeframe data
Visual Clarity: Clean, organized display with color coding
Customizable Alerts: Swing break and trend change notifications
Professional Grade: Institutional-level volume analysis
This indicator is designed for traders who want a comprehensive market analysis tool without the complexity of managing multiple separate indicators, providing holistic market insight through different technical perspectives.
SMA 9/50/180 + EMA 20 + ORB + BUY/SELLSMA + EMA + ORB + Buy/Sell indicator step by step.
🧠 1️⃣ What the Indicator Does
This TradingView script combines four systems in one:
Component Purpose
SMA 9 / 50 / 180 Shows short-, medium-, and long-term trend direction
EMA 20 Gives quicker trend signals
Buy/Sell Swing Logic Generates arrow signals based on breakout/reversal
ORB (Opening Range Breakout) Marks high and low of the market’s first few minutes (e.g. 9:15–9:20)
Together, it helps identify:
The main market trend
Entry/exit signals
Early breakout zones for intraday trading
📊 2️⃣ Moving Averages (SMA & EMA)
Indicator Meaning
SMA 9 Tracks short-term price (fast signal)
SMA 50 Tracks medium trend
SMA 180 Long-term trend direction
EMA 20 Gives quicker reactions than SMA (useful for early entries)
How to use:
When SMA9 > SMA50 > SMA180, trend = strong uptrend
When SMA9 < SMA50 < SMA180, trend = strong downtrend
So you trade in the same direction as the moving averages.
💡 3️⃣ Buy / Sell Swing Logic
This part finds small swing breakouts:
It checks the highest high and lowest low of the last few candles (default = 3).
If price closes above the previous high → Buy Signal (Green Arrow)
If price closes below the previous low → Sell Signal (Red Arrow)
It also plots a Trailing Line (TSL) that flips color:
🟢 Green line → Uptrend (price above TSL)
🔴 Red line → Downtrend (price below TSL)
Optional:
You can color bars/background to match buy/sell zones.
⏰ 4️⃣ ORB – Opening Range Breakout
Opening Range Breakout (ORB) marks the market’s first few minutes’ high and low (default 9:15–9:20).
These two lines act as important breakout zones.
If price breaks above ORB high → bullish momentum
If price breaks below ORB low → bearish momentum
Helps you trade early intraday moves confidently.
🧩 5️⃣ How to Use Together
🔼 Buy Setup
SMA9 > SMA50 → uptrend
Price near ORB High or above it
Green “Buy” arrow appears
✅ Enter Buy position
🎯 Exit near resistance (previous swing high)
🔽 Sell Setup
SMA9 < SMA50 → downtrend
Price near ORB Low or below it
Red “Sell” arrow appears
✅ Enter Sell position
🎯 Exit near next support
⚙️ 6️⃣ Customization
You can adjust:
SMA & EMA periods
ORB session time (e.g. 9:15–9:30)
Swing candle count
Color options for background/bars
✅ 7️⃣ Why It’s Useful
Benefit Description
Multi-confirmation Combines trend + breakout + swing signals
Intraday friendly ORB + fast MAs = perfect for 5–15 min charts
Visual clarity Arrows, lines, and colors show direction clearly
Alerts ready You get notifications when Buy/Sell triggers
ATR Adaptive (auto timeframe)This indicator automatically adjusts the Average True Range (ATR) period based on the current chart timeframe, helping traders define dynamic Stop Loss (SL) and Take Profit (TP) levels that adapt to market volatility.
The ATR measures the average range of price movement over a defined number of bars. By using adaptive periods, the indicator ensures that volatility is interpreted consistently across different timeframes — from 1-minute charts to daily or weekly charts.
It plots two main levels on the chart:
🔴 Low – ATR × Multiplier → Suggested Stop Loss (below the candle’s low)
🟢 High + ATR × Multiplier → Suggested Take Profit or trailing level (above the candle’s high)
Optional additional lines show ATR-based TP levels calculated from the current close.
💡 How to use
Select your desired ATR multiplier (e.g., 1.3× for SL, 1.0× for TP).
The script automatically detects the chart timeframe and uses an appropriate ATR length (e.g., ATR(30) on M5, ATR(21) on H1, ATR(14) on Daily).
Use the plotted levels to:
Set Stop Loss just below the red ATR band (for long trades).
Set Take Profit near or slightly below the green ATR band (for short trades, reverse logic).
⚙️ Why it helps
Maintains consistent volatility-based risk across multiple timeframes.
Avoids arbitrary fixed SL/TP values.
Makes the trading strategy more responsive in high-volatility markets and more conservative when volatility contracts.
Particularly useful for intraday and swing trading, where volatility varies significantly between sessions.
ICT Sessions With BOS [TradeWithRon]
WITH BOS
This version includes BOS with filter for each session.
NONE,FVG,CISD Filter preset
you can choose how many BOS per session, style etc.
ICT Sessions and killzones maps three intraday sessions on your chart (Asia, London, NY), tracks each session’s live high/low, draws optional session range boxes, and projects ICT OTE zones in real time—with granular styling, touch/mitigation logic, and alerting.
What it does
*Live Session high/low tracking.
Historical session lines:
When a session ends, its final High/Low are preserved as tracked lines (with optional labels) for a configurable number of recent sessions.
Session boxes (ranges):
Draws a shaded box from session start to end that expands with new highs/lows. Limit how many recent boxes remain on chart.
ICT OTE zones (live):
For the currently active session, projects user-defined Fibonacci OTE levels (e.g., 61.8%, 70.5%, 78.6) between the session’s running high and low. Zones update tick-by-tick and can show labels. You can retain a history of recent sessions’ OTE levels.
snapshot
Break visualization (mitigation):
Optionally color the bar when price breaks a stored session High/Low. You can:
Require a body close through the level (vs. any touch)
Auto-remove the line and/or label on touch/close
Use custom break colors per session and side (high/low)
Timestamps:
Add up to two recurring vertical timestamp markers (e.g., 08:00, 09:30), plus an opening horizontal marker (e.g., 09:30) with label that extends until the next occurrence.
Alerts:
Built-in alerts for:
Touch of Session 1/2/3 High/Low (Asia/London/NY)
Touch of OTE levels (per session)
Key inputs:
Time & Limits
Timezone (e.g., GMT-4)
Timeframe limit: hide all drawings on and above a specified TF
Sessions
Session windows (default):
Session 1 (Asia): 18:00–00:00
Session 2 (London): 00:00–06:00
Session 3 (NY): 08:00–12:00
How many to keep (lines/boxes)
Line width, colors, and label suffixes (“High”/“Low”)
Labels: toggle, text (“Asia”, “London”, “NY”), size, and colors
Boxes: toggle per session and background colors
ICT OTE Zones
Toggle per session (Asia/London/NY)
Levels (comma-separated %s, e.g., 61.8,70.5,78.6)
History: number of past sessions to retain
Opacity, line width/style, and label size
Custom label text per session (e.g., “Asia OTE”)
Break/Mitigation Behavior:
Enable Mitigated Candles (bar color on break)
Remove line on touch and/or remove label on touch
Require body close (vs. wick touch)
Custom break colors by session and side
Timestamps
Opening horizontal line (time, style, width, color, label text/size, drawing limit)
Two vertical timestamps (times, style, width, color, drawing limit)
Alerts
Master Enable Alerts
Per-session toggles for High/Low touches
OTE touch alerts
How it works (under the hood)
Detects session state via input.session() windows in the chosen timezone.
Live session High/Low lines and labels update in real time; on session end, final levels are stored with optional labels and tracked length.
OTE zones are live-computed from current session High↔Low and refreshed every bar; a compact rolling history is enforced.
Bar coloring reacts to break events (touch or body-close, per your setting) and uses session-specific colors when enabled.
Timestamp lines/labels are created on each occurrence and trimmed to a drawing limit for performance.
Tips:
To hide session lines but keep boxes, set line color opacity to 0.
Use Timeframe Limit to keep higher-TF charts clean.
Fine-tune OTE Levels and History to balance clarity and performance.
For stricter break logic, enable Require Body Close.
Note: The script reserves high limits for lines/labels/boxes to keep recent context visible while managing cleanup automatically. Adjust “Session Number” and “Number Of Boxes” to suit your workflow.
— © TradeWithRon
PulseGrid Universal Scalper - Adaptive Pulse and Symmetric SpansInstrument agnostic. Works on any symbol and timeframe supported by TradingView.
Message or hit me up in chat for full access .
Purpose and scope
PulseGrid is a short timeframe strategy designed to read intrabar structure and recent path so that entries align with actionable momentum and context. The strategy is private. The description below provides all the information needed to understand how it behaves, how it sizes risk, how to tune it responsibly, and how to evaluate results without making unrealistic claims. The design is instrument agnostic. It runs on any asset class that prints open high low close bars on TradingView. That includes commodities such as Gold and WTI, currencies, crypto, equity indices, and single stocks. Performance will always depend on the symbol’s liquidity, spread, slippage, and session structure, which is why the description focuses on principles and safe parameter ranges instead of hard promises.
What the strategy does at a glance
It builds a composite entry signal named Pulse from five normalized bar features that reflect short term pressure and follow through.
It applies regime guards that keep the strategy inactive when the tape is either too quiet, too bursty, or too directionally random.
It optionally uses a directional filter where a fast and a slow exponential average must agree and their gap must be material relative to recent true range.
When a signal is allowed, risk is sized using symmetric spans that come from nearby untraded price distances above and below the market. The strategy sets a single stop and a single take profit from those spans.
Lines for entry, stop, and take profit are drawn on the chart. A compact on chart table shows trade counts, win rate, average R per trade, and profit factor for all trades, longs only, and shorts only.
This combination yields entries that are reactive but not chaotic, and risk lines that respect the market’s recent path instead of generic pip or point targets.
Why the design is original and useful
The core originality is the union of a composite entry that adapts to volatility and a geometry based risk model. The entry uses five different viewpoints on the same bar space instead of relying on a single technical indicator. The risk model uses spans that come from actual untraded distance rather than fixed multipliers of a generic volatility measure. The result is a framework that is simple to read on a chart and simple to evaluate, yet it avoids the traps of curve fitting to one symbol or one month of data. Because everything is normalized locally, the same logic translates across asset classes with only modest tuning.
The Pulse composite in detail
Pulse is a weighted blend of the following normalized features.
Impulse imbalance. The script sums upward and downward impulses over a short window. An upward impulse is the extension of highs relative to the prior bar. A downward impulse is the extension of lows relative to the prior bar. The net imbalance, scaled by the local range, captures whether extension pressure is building or fading.
Wick and close location. Inside each bar, the distance between the close and the extremes carries information about rejection or acceptance. A bar that closes near the high with relatively heavier lower wick suggests upward acceptance. A bar that closes near the low with heavier upper wick suggests downward acceptance. A weight controls the contribution of wick skew versus close location so that users can favor reversal or momentum behaviour.
Shock touches. Within the recent range window, touches that occur very near the top decile or bottom decile are marked. A short sliding window counts recent shocks. Frequent top shocks in a rising context suggest supply tests. Frequent bottom shocks in a declining context suggest demand tests. The count is normalized by window length.
Breakout ledger. The script compares current extremes to lagged extremes and keeps a simple count of recent upside and downside breakouts. The difference behaves as a short term polarity meter.
Curvature. A simple second difference in closing price acts as a curvature term. It is normalized by the recent maximum of absolute one bar returns so that the value remains bounded and comparable to other terms.
Pulse is smoothed over a fraction of the main signal length. Smoothing removes impulse spikes without destroying the quick reaction that scalpers need. The absolute value of smoothed Pulse can be used with an adaptive gate so that only the top percentile of energy for the recent environment is eligible for entries. A small floor prevents accidental entries during very quiet periods.
Regime guards that keep the strategy selective
Three guards must all pass before any entry can occur.
Auction Balance Factor. This is the proportion of closes that land inside a mid band of the prior bar’s high to low range. High values indicate balanced chop where breakouts tend to fail. Low values indicate directional conditions. The strategy requires ABF to sit below a user chosen maximum.
Dispersion via a Gini style measure on absolute returns. Very low dispersion means bars are small and uniform. Very high dispersion means a few outsized bars dominate and slippage risk can be elevated. The strategy allows the user to require the dispersion measure to remain inside a band that reflects healthy activity.
Binary entropy of direction. Over the core window, the proportion of up closes is used to compute a simple entropy. Values near one indicate coin flip behaviour. Values near zero indicate one sided sequences. The guard requires entropy below a ceiling so that random directionality does not produce noise entries.
An optional directional filter asks that a fast and a slow exponential average agree on direction and that their gap, when divided by an average true range, exceed a threshold. This filter can be enabled on symbols that trend cleanly and disabled when the composite entry is already selective enough.
Risk sizing with symmetric spans
Instead of fixed points or a pure ATR multiplier, the strategy sizes stops and targets from a pair of spans. The upward span reflects recent untraded distance above the market. The downward span reflects recent untraded distance below the market. Each span is floored by a fallback that comes from the maximum of a short simple range average and a standard average true range. A tick based floor prevents microscopic stops on instruments with high tick precision. An asymmetry cap prevents one span from becoming many times larger than the other. For long entries the stop is a multiple of the downward span and the target is a multiple of the upward span. For short entries the stop is a multiple of the upward span and the target is a multiple of the downward span. This creates a risk box that is symmetric by construction yet adaptive to recent voids and gaps.
Execution, ties, and housekeeping
Entries evaluate at bar close. Exits are tested from the next bar forward. If both stop and target are hit within the same bar, the outcome can be resolved in a consistent way that favors the stop or the target according to a single user setting. A short cooldown in bars prevents flip flops. Users can restrict entries to specific sessions such as London and New York. The chart renders entry, stop, and target lines for each trade so that every action is visible. The table in the top right shows trade counts, take profit and stop counts, win rate, average R per trade, and profit factor for the whole set and by direction.
Defaults and responsible backtesting
The default properties in the script use a realistic initial capital and commission value. Users should also set slippage in the strategy properties to reflect their broker and symbol. Small timeframe trading is sensitive to friction and the strategy description does not claim immunity to that reality. The strategy is intended to be tested on a dataset that produces a meaningful sample of trades. A sample in the range of a hundred trades or more is preferred because variance in short samples can be large. On thin symbols or periods with little regular trading, users should either change timeframe, change sessions, or use more selective thresholds so that the sample contains only liquid scenarios.
Universal usage across markets
The strategy is universal by design. It will run and produce lines on any open high low close series on TradingView. The composite entry is made of normalized parts. The regime guards use proportions and bounded measures. The spans use untraded distance and range floors measured in the local price scale. This allows the same logic to function on a currency pair, a commodity, an index future, a stock, or a crypto pair. What changes is calibration.
A safe approach for universal use is as follows.
Start with the default signal length and wick weight.
If the chart prints many weak signals, enable the directional filter and raise the normalized gap threshold slightly.
If the chart is too quiet, lower the adaptive percentile or, with adaptive off, lower the fixed pulse threshold by a small amount.
If stops are too tight in quiet regimes, raise the fallback span multiplier or raise the minimum tick floor in ticks.
If you observe long one sided days, lower the maximum entropy slightly so that entries only occur when directionality is genuine rather than alternating.
Because the logic is bounded and local, these simple steps carry over across symbols. That is why the strategy can be used literally on any asset that you can load on a TradingView chart. The code does not depend on a specific tick size or a specific exchange calendar. It will still remain true that symbols with higher spread or fewer regular trading hours demand stricter thresholds and larger floors.
Suggested parameter ranges for common cases
These ranges are guidelines for one to five minute bars. They are not promises of performance. They reflect the balance between having enough signals to learn from and keeping noise controlled.
Signal length between 18 and 34 for liquid commodities and large capitalization equities.
Wick weight between 0.30 and 0.50 depending on whether you want reversal recognition or close momentum.
Adaptive gate percentile between 85 and 93 when adaptive is enabled. Fixed threshold between 0.10 and 0.18 when adaptive is disabled. Use a non zero floor so very quiet periods still require some energy.
Auction Balance Factor maximum near 0.70 for symbols with clear session bursts. Slightly higher if you prefer to include more balanced prints.
Dispersion band with a lower bound near 0.18 and an upper bound near 0.68 for most session instruments. Tighten the band if you want to skip very bursty days or very flat days.
Entropy maximum near 0.90 so coin flip phases are filtered. Lower the ceiling slightly if the symbol whipsaws frequently.
Stop multiplier near one and take profit multiplier between two and three for a single target approach. Larger target multipliers reduce hit rate and lengthen holding time.
These are safe starting points across commodities, currencies, indices, equities, and crypto. From there, small increments are preferred over dramatic changes.
How to evaluate responsibly
A clean chart and a direct test process help avoid confusion. Use standard candles for signals and exits. If you use a non standard chart type such as Heikin Ashi or Renko, do so only for visualization and not for the strategy’s signal computation, as those chart types can produce unrealistic fills. Turn off other indicators on the published chart unless they are needed to demonstrate a specific property of this strategy. When you post results or discuss outcomes, include the symbol, timeframe, commission and slippage settings, and the session settings used. This makes the context clear and avoids misleading readers.
When you look at results, consider the following.
The distribution of R per trade. A positive average R with a moderate profit factor suggests that exits are sized appropriately for the symbol.
The balance between long and short sides. The HUD table separates the two so you can see if one side carries the edge for that symbol.
The sensitivity to the tie preference. If many bars hit both stop and take profit, the market is chopping inside the risk box and you may need larger floors or stricter regime guards.
The session effect. Session hours matter for many instruments. Align your session filter with where liquidity and volatility concentrate.
Known limitations and honest warnings
PulseGrid is not a guarantee of future profit. It is a systematic way to read short term structure and to size risk in a way that reflects recent path. It assumes that the data feed reflects the exchange reality. It assumes that slippage and spread are non zero and uses explicit commission and user provided slippage to approximate that. It does not place multiple targets. It does not trail stops. It is not a high frequency system and does not attempt to model queue priority or microsecond fills. On illiquid symbols or very short timeframes outside regular hours, signals will be less reliable. Users are responsible for choosing realistic settings and for evaluating whether the symbol’s conditions are suitable.
First use checklist
Load the symbol and timeframe you care about.
If the instrument has clear sessions, turn on the session filter and select realistic London and New York hours or other sessions relevant to the instrument.
Set commission and slippage in the strategy properties to values that match your broker or exchange.
Run the strategy with defaults. Look at the HUD summary and the lines.
Decide whether to enable the directional filter. If you see frequent reversals around the entry line, enable it and raise the normalized gap threshold slightly.
Adjust the adaptive gate. If the chart floods, raise the percentile. If the chart starves, lower it or use a slightly lower fixed threshold.
Adjust the fallback span multiplier and tick floor so that stops are never microscopic.
Review per session performance. If one session underperforms, restrict entries to the better one.
This simple process takes minutes and transfers to any other symbol.
Why this script is private
The source remains private so that the underlying method and its implementation details are not copied or republished. The description here is complete and self contained so that users can understand the purpose, originality, usage, and limitations without needing to inspect the source. Privacy does not change the strategy’s on chart behavior. It only protects the specific coding details.
Guarantee and compliance statements
This description does not contain advertising, solicitations, links, or contact information. It does not make performance promises. It explains how the script is original and how it works. It also warns about limitations and the need for realistic assumptions. The strategy is not investment advice and is not created only for qualified investors. It can be tested and used for educational and research purposes. Users should read TradingView’s documentation on script properties and backtesting. Users should avoid non standard chart types for signal computation because those produce unrealistic results. Users should select realistic account sizes and friction settings. Users should not post claims without showing the settings used.
Closing summary
PulseGrid is a compact framework for short timeframe trading that combines a composite entry built from multiple normalized bar features with a symmetric span model for risk. The entry adapts to volatility. The regime guards keep the strategy inactive when the tape is either too quiet or too erratic. The risk geometry respects recent untraded spans instead of arbitrary distances. The entire design is instrument agnostic. It will run on any symbol that TradingView supports and it will behave consistently across asset classes with modest tuning. Use it with a clean chart, realistic friction, and enough trades to make your evaluation meaningful. Use sessions if the instrument concentrates activity in specific hours. Adjust one control at a time and prefer small increments. The goal is not to find a magic parameter. The goal is to maintain a stable rule set that reads market structure in a way you can trust and audit.
HPAS – Historical Price Action StatisticsHPAS – Historical Price Action Statistics (v7)
A data-driven overview of weekday behavior: price, volatility, and volume.
1) OVERVIEW
HPAS analyzes how each weekday behaves across your selected history. It aggregates daily returns, intraday ranges, and volumes into a compact heatmap table and optionally plots daily range bands (historical & today) on the chart.
Note: All weekday statistics are calculated using UTC-based daily candles for consistent results across markets (especially 24/7 assets like crypto).
The goal is context and probabilities — not signals.
2) HOW IT WORKS
Collects daily bar stats: % gain/loss (close vs open), intraday range ((High−Low) ÷ Open × 100), and contracts (volume).
Groups data by weekday (Sun–Sat) and computes: win/loss frequencies, average and max moves, average intraday ranges, and average volume.
Note: “Weekday” refers to the calendar day in UTC time . This ensures consistency across all assets and exchanges, particularly for 24/7 markets like crypto.
Compares average weekday volume to the current 20-day average (% of 20D).
Displays results in a color-shaded table; optionally draws historical daily range bands plus today’s projection with optional smoothing.
3) INCLUDED FEATURES
Core metrics
Total → Gain / Loss (% of Days): How often the day closes above/below open.
Closing → Avg / Max: Average and largest daily % moves up/down.
Intrabar (optional) → Avg / Max: Typical and extreme intraday % ranges.
Contracts → Avg (K): Average daily volume (shown in thousands).
Contracts → %20D: Weekday’s average volume as % of the current 20-day average.
Visualization & UX
Heatmap coloring: lower values appear darker; higher values lighter.
Current weekday highlight with a left-side triangle.
Tooltips on headers explain what/why/how.
Dark/Light theme support; Colorblind-safe palette toggle (Okabe–Ito).
Projection Bands
Plots historical daily range bands and today’s projected band.
Optional smoothing (SMA) for cleaner band movement.
Band Smoothing Explained: Applies a simple moving average over recent projection values to reduce sudden jumps in the upper/lower bands.
Higher values make the range lines steadier but slower to react; lower values show more real-time variability.
4) USAGE TIPS
Context, not prediction: Use stats to frame expectations, not to force trades.
Cycle awareness: Compare long vs short date windows; behavior can shift across regimes.
Volume tells a story: Elevated %20D can hint at increased participation or attention on certain weekdays.
Targets & risk: Range bands provide realistic context for sizing stops/targets.
Accessibility: Enable Colorblind-safe mode if red/green contrast is hard to read.
5) INTERPRETATION GUIDE
% Gain / % Loss — Frequency of up/down closes. Higher % Gain suggests a bullish weekday bias.
Avg Gain / Avg Loss — Mean daily % move on green/red days. Gauges typical magnitude.
Max Gain / Max Loss — Largest observed daily % change. Sets an upper bound of past extremes.
Hi-Lo Avg / Max — Typical and extreme intraday % ranges. Context for expected volatility.
Contracts Avg (K) — Average daily volume in thousands. Participation proxy.
%20D — Volume vs current 20-day average. 100% = typical, >100% = above-normal, <100% = lighter-than-normal.
6) CREDITS
Inspired by the HPAS concept popularized by Krown Trading and The Caretaker.
Rebuilt and extended for clarity, accessibility, and practical context.
Version: v7 (October 2025)
License: Educational, non-commercial use
Key Inputs (snippet)
// Projection Bands
grpBands = “Projection Bands”
showBands = input.bool(true, “Show daily range bands (historical & today)”, group=grpBands)
smoothLen = input.int(1, “Band smoothing (days)”, minval=1, maxval=20, group=grpBands)
Pro Divergence Scalper | Jekos01 v3.1 Title: Pro Divergence Scalper | Jekos01 v3.1
Short Description (For TradingView Feed/Pre-header)
The Trend Divergence Scalper v3.1 by Jekos01 is an advanced Pine Script indicator designed for high-probability, trend-continuation entries. It utilizes Hidden RSI Divergences with robust EMA, MACD, and Impulse filters to eliminate noise and pinpoint the exact end of corrections.
Full Presentation & Features
Welcome to the Pro Divergence Scalper v3.1, an aggressive yet highly filtered tool built to optimize your intraday and swing trading entries. This indicator focuses exclusively on trend continuation, significantly reducing the false signals common in counter-trend strategies.
1. Core Logic: High-Probability Trend Continuation
The primary trigger is the Hidden RSI Divergence. This signal confirms that a local pullback or correction is over, and the momentum is ready to resume the primary trend.
LONG Signal (Hidden Bullish Divergence): Triggers when the price makes a Higher Low (HL) while the RSI makes a Lower Low (LL). This is the classic signal for trend continuation in an uptrend.
SHORT Signal (Hidden Bearish Divergence): Triggers when the price makes a Lower High (LH) while the RSI makes a Higher High (HH). This signals that the downtrend is set to continue.
Absolutely! To successfully publish your indicator on TradingView for a global audience, the presentation must be in professional English.
I have compiled all the information, settings, and the description of the Pro Divergence Scalper | Jekos01 v3.1 into a coherent English presentation.
🇺🇸 TradingView Indicator Presentation (English)
📌 Title: Pro Divergence Scalper | Jekos01 v3.1
Short Description (For TradingView Feed/Pre-header)
The Trend Divergence Scalper v3.1 by Jekos01 is an advanced Pine Script indicator designed for high-probability, trend-continuation entries. It utilizes Hidden RSI Divergences with robust EMA, MACD, and Impulse filters to eliminate noise and pinpoint the exact end of corrections.
Full Presentation & Features
Welcome to the Pro Divergence Scalper v3.1, an aggressive yet highly filtered tool built to optimize your intraday and swing trading entries. This indicator focuses exclusively on trend continuation, significantly reducing the false signals common in counter-trend strategies.
1. Core Logic: High-Probability Trend Continuation
The primary trigger is the Hidden RSI Divergence. This signal confirms that a local pullback or correction is over, and the momentum is ready to resume the primary trend.
LONG Signal (Hidden Bullish Divergence): Triggers when the price makes a Higher Low (HL) while the RSI makes a Lower Low (LL). This is the classic signal for trend continuation in an uptrend.
SHORT Signal (Hidden Bearish Divergence): Triggers when the price makes a Lower High (LH) while the RSI makes a Higher High (HH). This signals that the downtrend is set to continue.
2. Multi-Level Filtering for Clean Signals
We've integrated three powerful filters to ensure high signal quality, customizable via the settings panel:
Filter Purpose Default State (for High Frequency)
EMA Trend Filter (20/70 or 20/34) Strict adherence to the main trend. LONG signals fire ONLY when the price is above the Slow EMA. ON
MACD Filter Confirms momentum validity. Triggers only upon a MACD crossover in the direction of the signal. OFF (For Max. Frequency)
Impulse Filter (Pump/Dump) (New in v3.1) Requires a sudden price acceleration (e.g., 1.5% move over 5 bars) to enter. Ideal for confirming breakout momentum. OFF (Recommended to experiment)
Экспортировать в Таблицы
3. Optimized Settings for Every Trading Style
The indicator is highly adjustable. Use the following recommended setups based on your preferred timeframe and style:
Trading Style Recommended Timeframe (TF) Slow EMA Length Pivot Strength (RSI Sensitivity)
Swing Trading (Lower Freq.) 4H / 1D 100 5
Intraday Trading (Balanced) 30m / 1H 50 / 70 4
Max. Frequency Scalping 5m / 15m 34 1
Экспортировать в Таблицы
(Note: The current most aggressive settings used are EMA 20/34 and Pivot Strength of 1 for maximum 15m/30m frequency.)
4. Visual Tools & Clarity
Background Trend Color: The chart background changes color (Green/Red) to visually confirm the strict EMA trend direction.
VRVP Levels (Simulation): Provides simulated horizontal Support and Resistance lines based on historical highs/lows (Volume-Weighted Levels) to assist with target setting and risk management.
⚙️ How to Get Started
Add the Pro Divergence Scalper | Jekos01 v3.1 to your chart.
Set your desired Timeframe (e.g., 15m for scalping).
Adjust the EMA and Pivot Strength in the Arguments tab according to the table above.
Use a higher timeframe (e.g., 1H) for trend confirmation before taking a signal on the lower timeframe.
Developed by: Jekos01
Disclaimer: This is a technical analysis tool and does not constitute financial advice. Always use strict risk management.
Zark CRT Line/Marker Color & Style Meaning
Previous Candle CRT Green (bullish) / Red (bearish) solid line Sweep confirmed on the previous candle
Current Candle CRT Green (bullish) / Red (bearish) dashed line Sweep currently happening on the current candle
Higher Timeframe CRT Orange dotted line Sweep from higher timeframe shown on lower timeframe chart
Target Line Blue dashed line Opposite side of liquidity for potential price target
Breaker Confirmed Aqua solid line (over previous/current CRT) Sweep confirmed with a break of a small swing
CRT Invalidated Gray line Sweep no longer valid (price closed beyond sweep level)
Full-Height HTF Divider Yellow vertical line Marks each higher timeframe bar for visual separation
Labels White text on colored background Shows type (Prev/Curr/HTF) and exact price
ICT Sessions [TradeWithRon]
ICT Sessions and killzones maps three intraday sessions on your chart (Asia, London, NY), tracks each session’s live high/low, draws optional session range boxes, and projects ICT OTE zones in real time—with granular styling, touch/mitigation logic, and alerting.
What it does
Live Session high/low tracking.
Historical session lines:
When a session ends, its final High/Low are preserved as tracked lines (with optional labels) for a configurable number of recent sessions.
Session boxes (ranges):
Draws a shaded box from session start to end that expands with new highs/lows. Limit how many recent boxes remain on chart.
ICT OTE zones (live):
For the currently active session, projects user-defined Fibonacci OTE levels (e.g., 61.8%, 70.5%, 78.6) between the session’s running high and low. Zones update tick-by-tick and can show labels. You can retain a history of recent sessions’ OTE levels.
Break visualization (mitigation):
Optionally color the bar when price breaks a stored session High/Low. You can:
Require a body close through the level (vs. any touch)
Auto-remove the line and/or label on touch/close
Use custom break colors per session and side (high/low)
Timestamps:
Add up to two recurring vertical timestamp markers (e.g., 08:00, 09:30), plus an opening horizontal marker (e.g., 09:30) with label that extends until the next occurrence.
Alerts:
Built-in alerts for:
Touch of Session 1/2/3 High/Low (Asia/London/NY)
Touch of OTE levels (per session)
Key inputs:
Time & Limits
Timezone (e.g., GMT-4)
Timeframe limit: hide all drawings on and above a specified TF
Sessions
Session windows (default):
Session 1 (Asia): 18:00–00:00
Session 2 (London): 00:00–06:00
Session 3 (NY): 08:00–12:00
How many to keep (lines/boxes)
Line width, colors, and label suffixes (“High”/“Low”)
Labels: toggle, text (“Asia”, “London”, “NY”), size, and colors
Boxes: toggle per session and background colors
ICT OTE Zones
Toggle per session (Asia/London/NY)
Levels (comma-separated %s, e.g., 61.8,70.5,78.6)
History: number of past sessions to retain
Opacity, line width/style, and label size
Custom label text per session (e.g., “Asia OTE”)
Break/Mitigation Behavior:
Enable Mitigated Candles (bar color on break)
Remove line on touch and/or remove label on touch
Require body close (vs. wick touch)
Custom break colors by session and side
Timestamps
Opening horizontal line (time, style, width, color, label text/size, drawing limit)
Two vertical timestamps (times, style, width, color, drawing limit)
Alerts
Master Enable Alerts
Per-session toggles for High/Low touches
OTE touch alerts
How it works (under the hood)
Detects session state via input.session() windows in the chosen timezone.
Live session High/Low lines and labels update in real time; on session end, final levels are stored with optional labels and tracked length.
OTE zones are live-computed from current session High↔Low and refreshed every bar; a compact rolling history is enforced.
Bar coloring reacts to break events (touch or body-close, per your setting) and uses session-specific colors when enabled.
Timestamp lines/labels are created on each occurrence and trimmed to a drawing limit for performance.
Tips:
To hide session lines but keep boxes, set line color opacity to 0.
Use Timeframe Limit to keep higher-TF charts clean.
Fine-tune OTE Levels and History to balance clarity and performance.
For stricter break logic, enable Require Body Close.
Note: The script reserves high limits for lines/labels/boxes to keep recent context visible while managing cleanup automatically. Adjust “Session Number” and “Number Of Boxes” to suit your workflow.
— © TradeWithRon
Trading Life ProOverview
Trading Life Pro is an advanced all-in-one indicator built for TradingView users who demand precision and insight. It delivers real-time entry and exit signals, dynamic support and resistance levels, and deep analytical tools designed to elevate your trading strategy. Every component is optimized for accuracy, speed, and clarity — helping you make confident, data-driven decisions in any market.
Key Features
Non-Repaint Signals: All entries are locked once generated — no repainting, no false signals.
Real-Time Entry & Exit: Get immediate trade signals as market conditions evolve.
Smart Range Finder: Identify ideal trading zones based on current volatility and market structure.
Fundamental Analyzer: Automatically assess economic and market factors with on-chart insights once sufficient data is available.
Automatic 3-TP Levels: Configure up to three adaptive take-profit levels that track live market momentum.
Duo FVG Detection: Spot and trade Fair Value Gaps across consecutive candles for ultra-precise entries and exits.
Dynamic Support & Resistance: Detect key turning points and price reaction zones in real time.
Candle Sentiment Analyzer: Identify bullish and bearish candlestick formations to gauge market sentiment.
Market Screener: Scan multiple markets to uncover high-probability trade setups.
Adaptive Modes: Switch easily between Default, Aggressive, and Long Shot presets to match your trading style.
Trend Power Analyzer: Measure and visualize the strength of market trends directly from candlestick behavior.
Hyper Insights: Unlock advanced, context-based analytics for better decision-making.
RSI Analyzer: Evaluate overbought and oversold conditions with dynamic RSI integration.
Custom Alerts: Receive instant notifications for trade entries, trend shifts, or market changes.
Lifetime Access: One-time purchase — no subscriptions, no hidden costs.
Universal Compatibility: Works on all currency pairs, indices, and timeframes.
Heikin Ashi Optimized: Fully compatible and optimized for Heikin Ashi charts for smooth visualization and fast loading.
Free Updates & Training: Enjoy continuous updates plus a free video tutorial to master every feature.
Description
Trading Life Pro delivers a comprehensive trading toolkit within TradingView. From pinpoint entries and automated take-profit levels to real-time analysis of trends, fundamentals, and fair value gaps — every feature is crafted for traders seeking consistency and edge.
With powerful alerts, adaptive presets, and universal compatibility, Trading Life Pro seamlessly integrates into any trading workflow, supporting all markets, timeframes, and chart types.
Usage
Access real-time trade signals directly on TradingView.
Use Smart Range Finder and Fundamental Analyzer for context-driven entries.
Configure Automatic TP Levels and analyze trend strength via candlestick and RSI tools.
Enable alerts to stay informed about market shifts and entry confirmations — even when you’re away from the screen.
Options Symphony Adaptive CE/PE for Indian IndicesDescription:
This invite-only Pine Script indicator is built for Indian market options traders. It plots the Call and Put charts for a selected strike simultaneously, including adaptive moving averages on both.
Single-Chart Options View: Visualize both CE and PE charts on a single pane.
User-Friendly: Enter one strike (Put), and the indicator handles the dual-chart display.
Adaptive MA: Features adaptive moving averages for smarter trend analysis in both trending and ranging markets.
Invite-Only: Access is granted by the author and requires permission.
To get started: Request access from the author to be added to the invite list.
SSMT [TakingProphets]SSMT (Sequential SMT) — multi-cycle intermarket divergence with quarter-based timing
Purpose
Informational overlay that detects intermarket SMT divergences between the chart symbol and a user-selected correlated symbol. It does not generate buy/sell signals and is not financial advice. Use it to structure analysis and alerts, not to automate trades.
What it does
Scans for SMT on five coordinated cycles: Micro, 90-Minute, Daily (Q1–Q4), Weekly, Monthly.
Draws anchored lines and labels where divergences occur and keeps them after the period ends so you can use historical SMTs as context.
Offers per-cycle alerts (high-side/bearish, low-side/bullish).
Optional session/quarter boxes for timing context.
Time base uses America/New_York to align with common session conventions (with a 17:00–18:00 ET pause guard for CME instruments).
Why these modules belong together (more than a mashup)
All cycles share a single time-partitioning framework (quarters/sessions → day → week → month). That common clock means:
Comparability: divergences on Micro/90m/D/W/M are directly comparable because they’re computed with the same boundaries for both instruments.
Sequencing: higher-cycle context can gate lower-cycle events (e.g., a Daily Q3 divergence framing how you treat a Micro divergence).
Persistence: drawings retain the cycle identity (e.g., , ) so prior signals remain interpretable as the market progresses.
This is a coherent engine—not separate indicators pasted together—because detection, labeling, alerts, and persistence are all driven by the same quarter/period state machine.
How it works (high-level mechanics)
Time partitioning
Daily quarters (ET):
Q1: 18:00–00:00
Q2: 00:00–06:00
Q3: 06:00–12:00
Q4: 12:00–18:00
90-Minute cycle: four 90-minute blocks inside the active session.
Micro cycle: finer 20–22 minute blocks inside the session for granular timing.
Weekly/Monthly: tracked by calendar periods (Mon–Fri, and calendar month).
Pause guard: 17:00–18:00 ET to avoid false transitions during CME’s daily maintenance window.
State tracking (per cycle)
Tracks previous vs. current highs/lows for the chart symbol and the correlated symbol (fetched at the same timeframe).
Maintains cycle IDs (e.g., year*100 + weekofyear for weekly) so drawings remain tied to the originating period.
Divergence condition (SMT)
High-side (bearish): one instrument makes a higher high vs. its previous period while the other does not.
Low-side (bullish): one instrument makes a lower low vs. its previous period while the other does not.
When detected, the script plots a labeled span/line (e.g., SSMT w/ES) and records it for persistence.
Alerts
Two per cycle: High-side (bearish) and Low-side (bullish).
Fire on the bar where the condition first becomes true.
Inputs & customization
Correlated symbol (default can be an index future).
Cycle toggles: Micro, 90m, Daily (Q1–Q4), Weekly, Monthly.
Styling: line color/width, label text/size.
Session/quarter boxes: on/off.
Alerts: per-cycle SMT events on/off.
How to use
Add the indicator to your chart (e.g., NQ, ES) and select a correlated symbol.
Turn on the cycles you want to monitor; optionally enable quarter/session boxes.
Interpret SMTs by side:
High-side (bearish): chart makes HH, correlated does not.
Low-side (bullish): chart makes LL, correlated does not.
Set alerts for the cycles that matter to your workflow.
Combine with your higher-timeframe narrative and risk rules.
Repainting, timing, and limitations
Uses higher-timeframe data without look-ahead; values can update intrabar until the period closes.
SMTs may form and resolve within a period; conservative users may wait for period close.
Assumes America/New_York timing; very thin markets may yield fewer or noisier signals.
SMT quality depends on the benchmark you select; correlations vary across regimes.
Educational tool only. No performance claims; not a signal generator.
Originality & scope (for protected/invite-only publications)
A multi-cycle SMT engine built on a shared quarter/period state machine (Micro → 90m → Daily Q1–Q4 → Weekly → Monthly).
Quarter-aware persistence keeps divergence drawings tied to their source cycle for durable context.
CME pause handling and stable calendar IDs make detections consistent across sessions and rollovers.
Implements SMT through extremum sequencing and cross-instrument comparison rather than wrapping generic divergence indicators.
CRT [TakingProphets]CRT (Candle Range Theory) — HTF context overlay with alerts
Purpose
Informational overlay to structure higher-timeframe (HTF) context. It does not generate buy/sell signals and is not financial advice. Use it to organize analysis and alerts—not to automate trades.
What it does
Projects HTF candles (1m → 1M) on any lower timeframe so the big picture stays on the chart.
Detects CRT transitions on the HTF (bullish/bearish “failed continuation” pattern).
Evaluates SMT divergence vs. a user-selected correlated instrument on the same HTF (historical & real-time).
Extends live HTF Open/High/Low/Close as developing reference levels.
Concepts (what it looks for)
Candle Range Theory (CRT) — a 3-bar HTF pattern where candle 2 fails to continue candle 1’s move:
Bearish CRT: candle 2 trades above candle 1’s high but closes back inside candle 1’s range and does not break its low.
Bullish CRT: candle 2 trades below candle 1’s low but closes back inside candle 1’s range and does not break its high.
SMT divergence (intermarket) — compares HTF swing extremes between the chart symbol and a correlated symbol:
Bearish SMT: one makes a higher high while the other does not.
Bullish SMT: one makes a lower low while the other does not.
Checked in two modes: historical (between the two last closed HTF bars) and real-time (last closed vs. current forming HTF bar).
How the elements work together (integration, not a mashup)
All modules share one HTF time base, so annotations describe the same segment of price action. The overlay produces an explicit context state by sequencing the modules in this order:
HTF Projection → Structural Frame
The last three HTF candles are drawn (bodies+wicks). This creates the “canvas” the rest of the logic references (ranges, highs/lows, and time boundaries).
CRT Test → Directional Bias Candidate
The script evaluates the 3-bar CRT conditions on those exact HTF candles (not lower-TF approximations).
If conditions are forming on the current HTF bar, status is CRT Forming.
If they complete on the close, status becomes CRT Confirmed (Bullish/Bearish).
SMT Check → Confirmation/Stress-Test on the Same HTF
Using the same HTF window, the tool compares swing progress with the correlated symbol.
Historical SMT comments on whether the prior HTF segment’s push had intermarket agreement.
Real-time SMT comments on the current forming push.
This lets you confirm a CRT bias (e.g., Bearish CRT + Bearish SMT) or challenge it (e.g., Bullish CRT but Bearish SMT).
Live HTF OHLC → Actionable Reference Levels
The current HTF Open/High/Low/Close are extended as levels. These are the decision rails you’ll typically use to judge follow-through, failure, mitigation, or targets in the same CRT/SMT context.
Resulting context states (what you’ll see in alerts/labels):
Neutral (no CRT; SMT may still inform context).
CRT Forming (monitor): HTF push is underway; watch real-time SMT into HTF High/Low/Close projections.
CRT Confirmed (bias): HTF failure pattern locked; use projections as reference for continuation/invalidations.
CRT + SMT Aligned (confluence): CRT direction agrees with SMT; strongest context.
CRT vs. SMT Mixed (caution): bias exists but intermarket is disagreeing; treat levels as potential fade zones.
Why this is not a mashup
Every module is computed and plotted in the same HTF coordinate system, so signals are about one thing: the current HTF segment.
CRT provides the bias hypothesis, SMT provides a cross-market test of that hypothesis in the same window, and live OHLC projections supply the exact levels used to act on or fade that hypothesis.
Alerts are tied to state transitions (e.g., CRT forming → confirmed; SMT flip), not to unrelated features.
Mechanics (high-level)
HTF Projection: pulls HTF OHLC/time for the last three HTF bars and renders body boxes + wicks; optional time labels adapt to intraday vs D/W/M.
CRT Labels: when the three-bar conditions are met, prints BULLISH CRT or BEARISH CRT on the HTF stack.
SMT Lines: draws labeled diagonals across the relevant HTF pair for historical and real-time checks using your correlated symbol.
Live Levels: extends the current HTF Open/High/Low/Close horizontally; anchors are deterministic (Open = first bar, High/Low = first occurrence, Close = current bar).
Inputs & customization
HTF timeframe: 1m–1M.
Display: candle width/opacity, borders/wicks, time labels (12h/24h).
SMT: enable/disable, correlated symbol, line style/width, optional labels.
Projections: enable/disable, left extension (bars), per-level styling and price labels.
Alerts: switches for CRT, SMT-historical, SMT-real-time.
Alerts (workflow prompts)
Bullish/Bearish CRT detected on the selected HTF.
Bullish/Bearish SMT (historical) between the two last closed HTF bars.
Bullish/Bearish SMT (real-time) between the last closed and current forming HTF bar.
Suggested text includes the HTF and current context state so you know if CRT and SMT are aligned or mixed.
Example use
Bearish scenario: A Bearish CRT confirms on the 4H; soon after, real-time SMT (bearish) appears while price probes the projected 4H High. Context = CRT + SMT Aligned → treat the projected Open/Close as near-term objectives.
Mixed scenario: A Bullish CRT forms on 1H, but historical SMT (bearish) printed in the prior segment. Context = Mixed → continue to monitor real-time SMT and projected Low for possible invalidation.
Notes & limitations
HTF values are provisional until the HTF bar closes; labels/lines can update while forming.
SMT depends on the correlated symbol you select; relationships vary by market/regime.
Session gaps/illiquid hours can distort extremes and time labels.
Educational tool: no performance claims, no entry/exit signals.
Originality & scope (for protected/invite-only publications)
A unified HTF projection → CRT test → SMT check → live level pipeline that yields explicit context states instead of separate, unrelated overlays.
Formal CRT detection performed on actual HTF bars (not lower-TF approximations).
Dual-mode SMT tied to the same HTF windows (historical + real-time), plotted as labeled span lines.
Deterministic OHLC projection (first-occurrence anchoring) to align decisions with the identified context.
Attribution: CRT/SMT concepts inspired by ICT. Design, implementation, and alert framework by TakingProphets.
Metals vs DXY CorrelationThere's a growing interest in Gold and Metals in general - due to safe have demand - a lot of traders get blindsided by sudden consolidation and reversals while trading Gold or Silver. The key is to know that GC is closely related to DXY because large institutions and central banks hedge the two instruments. They are inversely correlated for the most part.
This indicator looks at price action applies Pearson correlation to find the strength in their "entanglement" and tells you if its is strongly, weakly or positively correlated.
It has helped me stay away from the markets when there's a strong inverse correlation because the price action can be very unpredictable.
Hopefully you find this useful.
Prophet Model [TakingProphets]The Prophet Model — context pipeline (HTF PDA → Sweep → CISD → EPE) with dynamic risk
Purpose
Informational overlay for organizing institutional context in real time. It does not issue buy/sell signals and is not financial advice. Use it to structure analysis and checklist-driven execution—not to automate decisions.
What it does (modules at a glance)
Projects HTF PD Arrays (FVGs) onto your current chart and maintains only the nearest active array.
Validates directional bias using Candle Range Theory (CRT) on the same HTF.
Tracks Liquidity Sweeps (BSL/SSL) on HTF-aware pivots.
Confirms Change in State of Delivery (CISD) via displacement after a sweep.
Optionally refines entries with EPE when a local (internal) imbalance forms right after CISD.
Derives dynamic TP/BE/SL from measured displacement and recent extremes (not fixed distances).
Keeps a rules checklist (PDA tap → CRT → Sweep → CISD) and a relationships table (common HTF↔LTF pairings) to enforce process.
How it works (integration, not a mashup)
The modules are sequenced on one HTF time base so each step gates the next:
HTF PD Arrays (context zone). The model identifies valid HTF FVGs, filters tiny/weekend gaps, removes arrays that are invalidated by clean trades-through, and persists only the nearest PDA. This focuses attention on the institutional zone most likely to matter now.
CRT (directional gating). CRT on the same HTF establishes a provisional bias. No entries are implied; CRT simply permits or forbids the following steps. If CRT disagrees with the PDA context, the checklist remains incomplete.
Liquidity Sweep (event). The model tracks HTF-aware BSL/SSL pivots. A sweep only “counts” if it occurs in relation to the active PDA (tap/engagement). This prevents generic swing-high/low tags from triggering downstream logic.
CISD (confirmation). After a qualified sweep, the tool looks for displacement through the sequence open (the open of the impulsive leg beginning at or immediately after the sweep). Crossing that threshold confirms CISD, which marks a structural delivery shift consistent with the CRT bias.
EPE (refinement, optional). Immediately following CISD, the model scans for a fresh internal imbalance. If found quickly, it promotes that price area as the Easiest Point of Entry (EPE) and relabels the reference. If not, the CISD level remains primary.
Dynamic risk levels. TP/BE/SL are derived from the measured displacement around the CISD leg (e.g., BE ≈ 1× leg, TP ≈ 2.25× stretch; SL aligned to nearby structural extremes rather than a fixed pip offset). Levels update with structure and can display prices.
By chaining PDA → CRT → Sweep → CISD → (EPE) → Risk on a single HTF backbone, the tool creates a coherent workflow where later signals simply do not appear without earlier context. That’s why this is not a bundle of independent features: each module’s output is another module’s input.
Concepts & operational rules (high level)
HTF PD Arrays (FVGs)
Uses a standard three-candle gap definition on the chosen HTF, with filters for weekend/tiny gaps.
Inverse mitigation: if price trades cleanly through an array, the box is removed and internal state resets.
Nearest-PDA persistence: when multiple arrays exist, only the closest remains visible to reduce clutter.
Optional right-extension draws lingering influence X bars forward.
Candle Range Theory (CRT)
Bullish CRT: candle 2 wicks below candle 1’s low but closes back inside candle 1’s range, without taking its high.
Bearish CRT: candle 2 wicks above candle 1’s high but closes back inside candle 1’s range, without taking its low.
Role: bias validation paired to CISD when alignments match the active PDA.
Liquidity Sweeps (BSL/SSL)
Tracks candidate HTF pivots as buy-/sell-side liquidity.
A sweep registers when price takes a tracked pivot in the vicinity of the active PDA.
CISD (Change in State of Delivery)
Finds the sequence open for the impulsive leg that begins at/after the sweep.
Bearish path (after BSL sweep): CISD when close < sequence-open.
Bullish path (after SSL sweep): CISD when close > sequence-open.
On confirmation, the model plots a CISD line, checks the box in the Strategy Checklist, and triggers risk calc.
EPE (Easiest Point of Entry)
Within a short window after CISD, scans for a local imbalance; if present, promotes that level as EPE.
If no imbalance forms, CISD remains the operative reference.
Dynamic TP / BE / SL
Built from the measured leg around CISD (not fixed pip steps).
Approximate geometry: BE ≈ 1× leg, TP ≈ 2.25× leg; SL respects nearby structural extremes.
Labels and price markers are optional.
Architecture notes
Maps the current chart to a higher timeframe (e.g., 15s→M5, M1→M15, M5→H1, M15→H4, H1→D, H4→W, D→M).
Retrieves HTF OHLC/time with no lookahead so structures update intrabar until the HTF bar closes.
Periodic cleanup clears obsolete lines/labels/boxes to keep charts responsive.
Inputs (summary)
FVGs/PD Arrays: show/hide, colors, borders, label size, right-extension, nearest-only toggle.
CRT: enable/disable, label style.
Sweeps/CISD/EPE: enable/disable, line/label styles, EPE window.
Risk Levels (TP/BE/SL): enable each, price labels on/off, colors.
Tables/Checklist: strategy checklist on/off; relationships table (common HTF↔LTF pairings); text sizes and header colors.
Alerts (optional)
You may add alertconditions aligned with these events in your own workspace:
HTF PDA tap (bullish/bearish box)
CRT detected (bullish/bearish)
CISD confirmed (bullish/bearish)
EPE set/updated
Example messages:
“Prophet: CISD confirmed on {{ticker}} / {{interval}}”
“Prophet: EPE refined at {{close}} ({{time}})”
Notes & limitations
HTF values are provisional until the HTF bar closes; labels/levels can update while forming.
CISD/EPE are live conditions; they can form and later invalidate within the same HTF bar.
Liquidity relationships vary by market/regime; thin sessions and large gaps can affect clarity.
Educational tool only. No performance claims; no trade signals.
Originality & scope (for protected/invite-only publications)
A single HTF-synchronized engine sequences PDA → CRT → Sweep → CISD → (EPE) and withholds later steps unless prerequisites are met.
Nearest-PDA persistence and inverse-mitigation enforce focus on the most relevant institutional zone.
Displacement-based risk math ties TP/BE/SL to structure instead of static offsets.
Checklist + relationships table promote consistent, rules-first behavior and reduce discretionary drift.
Attribution: Concepts inspired by ICT (PD arrays/FVGs, CRT, sweeps, displacement, refined entries). Design, integration logic, and risk framework by TakingProphets.
HTF Candles [TakingProphets]HTF Candles — higher-timeframe structure, SMT divergence, and live OHLC projections
Purpose
Informational overlay to keep higher-timeframe (HTF) context visible on a lower-timeframe chart. It does not generate buy/sell signals and is not financial advice. Use it to structure analysis and alerts, not to automate trading.
What it does
HTF candle visualization (up to 10 candles, optional right-side offset) with bodies, wicks, and time labels.
SMT divergence checks on the chosen HTF—both historical (last two completed HTF bars) and real-time (last closed vs. current forming bar) vs. a user-selected correlated symbol (default can be an index future).
Live HTF OHLC projections: forward-extending Open / High / Low / Close from the current HTF bar with optional price labels and styling.
HTF close timer (optional) to show when the active HTF candle ends.
Why these modules belong together (more than a mashup)
This overlay uses one HTF time base to align three lenses of the same context:
Candle projection provides the structural frame (ranges and bodies of true HTF bars).
SMT divergence provides intermarket confirmation/invalidations on that same HTF, so the divergence you see is directly comparable to the projected candles.
Live OHLC projections turn the current HTF bar’s evolving state into concrete reference levels for intraday decisions.
Because all three share the same HTF clock and data source, alerts and drawings change together when the HTF state actually changes. The intent is a coherent workflow tool where each module gates the others (structure → confirmation → actionable references), rather than separate indicators merely co-plotted.
How it works (high-level)
Timeframe mapping & data
You choose an HTF (1m–1M). The script retrieves HTF OHLC/time without look-ahead. Objects update intrabar until the HTF bar closes.
Candle rendering
Up to 10 recent HTF candles are drawn as body boxes with wicks.
A horizontal offset/spacing option places the stack right of the current price for clarity.
Visuals (colors, transparency, borders, wick width, label size/format 12h/24h) are configurable.
SMT divergence (historical & real-time)
Compares HTF highs/lows of your chart vs. a correlated symbol using the same HTF.
Bearish SMT (high-side): one makes a higher high while the other does not.
Bullish SMT (low-side): one makes a lower low while the other does not.
Historical mode compares HTF → HTF ; real-time mode compares HTF → HTF as the current HTF bar forms.
Optional lines/labels mark where the divergence is detected.
Live OHLC projections
Extends the current HTF Open / High / Low / Close forward as horizontal lines.
Anchors: Open = first bar of the HTF period; High/Low = first occurrence of each extreme inside the period; Close = current bar.
Each level has independent toggles for price labels, style, and width.
Alerts (workflow prompts)
Bullish SMT, Bearish SMT, Bullish Real-time SMT, Bearish Real-time SMT.
Fire on the bar where the condition first becomes true.
Inputs & customization
Timeframe: select HTF (1m–1M).
Display: number of candles (1–10), right-offset, candle width, transparency, time labels on/off (12h/24h), label size, HTF close timer on/off.
Visuals: bullish/bearish body colors, border color, wick color.
SMT: enable/disable, correlated symbol, line style/width, labels on/off, alerts on/off.
Projections: enable/disable, per-level toggles (Open/High/Low/Close), color/style/width, optional price labels.
Notes & limitations
HTF values are provisional until the HTF bar closes; lines/labels can update during formation.
SMT usefulness depends on the correlated symbol you select; relationships vary by market/regime.
Session gaps/low liquidity can affect extremes and time labels.
Educational tool only. No performance claims and no trade signals.
Originality & scope (for protected/invite-only publications)
A single HTF-synchronized engine: candle projection, dual-mode SMT, and live OHLC projections all computed from the same HTF series to ensure consistent timing and interpretation.
Real-time SMT explicitly ties the developing HTF bar to the prior closed bar, reducing ambiguity vs. generic divergence checks.
Projection anchoring (first-occurrence rules for H/L, period start for Open, current bar for Close) provides deterministic, reproducible reference levels.