Empiece

Bandas y canales

XAUUSD Power @ Strict Pivot S/RThis indicator identifies who is in control (buyers or sellers) when price reaches key support and resistance zones, defined using strict pivot points. How it works Automatically plots support and resistance using confirmed pivots. Analyzes candle structure: candle direction (bullish / bearish) body size wick dominance A signal is shown only when: price is near support or resistance (ATR-based filter) there is clear buying or selling strength Signals appear only after the candle closes (no repaint). Signals 🔺 Green triangle → buyers gain control at support 🔻 Red triangle → sellers gain control at resistance Best use Scalping / intraday trading Recommended timeframe: 5-minute Works well on volatile markets such as XAUUSD, US30, NASDAQ Important Confirmation tool, not a prediction system Not an automated trading strategy Should be used with proper risk management
Indicador Pine Script®
por Arduzai1999
Statistical Range and Daily Range - MaePla PakkakeawSupport & Resistance Box (MaePla Pakkakeaw) Major support and resistance levels are drawn approximately 500 points apart. These are called Statistical Lines. Statistical support and resistance levels are drawn at price levels ending in 0 and 5. Daily Range (Start the Day on H4 Timeframe) At 7:00 AM, check the H4 candle close. Identify the price level closest to a statistical line as the minor support or resistance. The next statistical line 500 points above becomes the upper price range. The next statistical line 500 points below becomes the lower price range.
Indicador Pine Script®
por ninjap6cih
1
Multi Trendlines from Pivots (>=3 Touches). DaliliIndicator Description Multi Trendlines from Pivots (≥3 Touches) This indicator automatically identifies and draws straight support and resistance trendlines based on confirmed price pivots. It is designed to approximate how a disciplined discretionary trader would draw trendlines, but does so algorithmically and consistently. What it does 1. Pivot-based structure detection The indicator first identifies swing highs and swing lows using a configurable pivot length. Only confirmed pivots are used, so lines do not repaint. 2. Line construction logic For each side of the market: • Pivot highs are used to construct resistance lines (drawn in red). • Pivot lows are used to construct support lines (drawn in green). All possible straight lines formed by pairs of pivots are evaluated. 3. Minimum touch requirement A line is only considered valid if at least 3 pivot points fall on or very near that line. “Near” is defined by a volatility-adjusted tolerance using ATR (Average True Range), so the logic adapts across symbols and timeframes. 4. Multi-line output The script does not stop at a single trendline. It draws as many valid lines as possible, up to a configurable maximum per side, prioritizing lines with the highest number of touches. 5. Dynamic updating Lines are rebuilt only when new pivots form. Old lines are removed and replaced as structure evolves, keeping the chart clean and relevant. Visual output • Red straight lines: Resistance lines derived from pivot highs. • Green straight lines: Support lines derived from pivot lows. • Lines optionally extend to the right, projecting future support or resistance. What it is not • It does not curve or smooth lines. • It does not use regression channels or moving averages. • It does not rely on candle bodies unless explicitly modified. • It does not repaint past structure. Use case This indicator is best suited for: • Structural market analysis. • Identifying confluence zones where multiple trendlines cluster. • Swing trading and breakout/failure analysis. • Overlaying objective structure on discretionary price action analysis. If you want to further constrain it, the next logical refinements would be: • Only downward-sloping resistance and upward-sloping support. • Requiring touches to be higher highs or lower lows. • Switching touches from pivots to raw candle highs/lows. • Enforcing minimum bar separation between touches. All of those can be layered on without changing the core architecture.
Indicador Pine Script®
por cdalili
Volume Weighted MACD (Bollinger style)This indicator implements a Volume-Weighted MACD inspired by John Bollinger’s approach. Instead of using standard exponential moving averages, the MACD line is calculated with volume-weighted EMAs, giving more importance to price movements that occur with higher volume. The signal line remains a regular EMA of the VWMACD, preserving the classic MACD structure while adding volume confirmation. How it works Fast VWEMA = EMA(price × volume) / EMA(volume) Slow VWEMA = EMA(price × volume) / EMA(volume) VWMACD = Fast VWEMA − Slow VWEMA Signal Line = Standard EMA of the VWMACD Histogram = Difference between VWMACD and Signal Purpose The indicator helps answer a key question: Does volume support the trend? If price moves are accompanied by strong volume, the VWMACD will reinforce the signal. If volume fades, underlying weakness becomes more visible. Typical Use Crossovers for timing entries and exits Divergences to spot potential reversals Histogram expansion/contraction to gauge momentum strength This tool blends trend and momentum analysis with built-in volume weighting to reduce false signals caused by low-participation price moves.
Indicador Pine Script®
por danavillanueva
MAD RSIMAD RSI ~ by GForge An adaptive trend-following indicator that combines RSI momentum with Median Absolute Deviation (MAD) volatility bands to identify trend direction, gauge regime strength, and generate entry/exit signals. Core Concept Most band-based indicators use Standard Deviation to measure volatility. The problem is that StdDev is highly sensitive to outlier candles — a single spike from news, earnings, or liquidation cascades can blow out the bands and distort signals. This indicator replaces StdDev with Median Absolute Deviation (MAD), a statistically robust volatility measure that resists outliers while still tracking genuine changes in market volatility. The result is more stable bands that better represent the true trading range. RSI-Adaptive Mechanism A smoothed RSI is calculated and used to dynamically scale the band width. The logic works as follows: when RSI is near 50 (neutral/indecisive), the bands stay at their base width. As RSI moves further from 50 in either direction — indicating stronger bullish or bearish momentum — the bands widen proportionally. This creates a self-adjusting system: during strong trends the bands expand to avoid premature exits, and during choppy consolidation they contract to keep signals responsive. The RSI smoothing parameter applies an EMA on top of the raw RSI to control how quickly the adaptive multiplier responds. A low smoothing value makes the bands react quickly to momentum shifts. A higher value smooths out the adaptation, which can reduce whipsaws in noisy conditions. Oscillator & Signal Logic The indicator computes a Basis line (Simple Moving Average) and places the adaptive MAD bands above and below it. Price position within these bands is then normalized into an oscillator ranging from 0 to 100, where 0 means price is at the lower band, 50 means price is at the basis, and 100 means price is at the upper band. Signals are generated when this oscillator crosses key thresholds: A long signal fires when the oscillator crosses above the Long Threshold, indicating price has moved convincingly into the upper portion of the adaptive channel. A short/exit signal fires when the oscillator crosses below the Short Threshold, indicating momentum has weakened and price is falling back within the channel. The thresholds are independently configurable. For example, setting a Long Threshold of 80 means you require price to push well above the midpoint before entering, while a Short Threshold of 30 means you exit relatively early before price reaches neutral. This asymmetry can be tuned for different risk appetites — tighter thresholds produce more signals with smaller moves, wider thresholds produce fewer signals but filter out more noise. Key Parameters Source — the price input for all calculations. Close is standard, but hl2, hlc3, or ohlc4 can provide smoother behavior on volatile instruments. RSI Length — controls the RSI lookback period. Longer values produce a smoother RSI that changes the adaptive multiplier gradually. Shorter values make it more reactive. RSI Smoothing — additional EMA smoothing applied to the RSI before it feeds into the adaptive multiplier. Set to 1 for no extra smoothing. Basis Length — the SMA period for the center line of the channel. This is the trend anchor. Longer values track slower trends, shorter values hug price more closely. MAD Length — lookback for the Median Absolute Deviation calculation. Controls how many bars contribute to the volatility estimate. Longer values produce more stable bands, shorter values adapt faster. Volatility Multiplier — the base scaling factor for band width before RSI adaptation is applied. Higher values widen the bands and reduce signal frequency. Lower values tighten them and increase signal frequency. Visuals A gradient cloud beneath price provides an at-a-glance read of trend regime and strength. Bar colors reflect the oscillator position. Signal markers appear as diamonds above and below bars. Usage Notes This is a tool to assist your analysis, not a standalone trading system. Always apply your own risk management and confirm signals with additional context. Past performance does not guarantee future results. Default settings are a starting point — optimize for your specific instrument, timeframe, and trading style. The MAD calculation is particularly well-suited for instruments prone to sudden spikes or gap moves where Standard Deviation-based indicators tend to produce erratic signals. Developed by GForge
Indicador Pine Script®
por GForge
1
CRR HH LL EMASCRR – EMAs (Price Floors) v4 – Stick Right is an educational chart overlay designed to help traders visualize market structure and price context, not to generate trading signals. This indicator is built around two core concepts: EMA-based price structure Clear visual references anchored to the most recent confirmed bar What this indicator IS A visual tool to display EMA structure (20 / 50 / 100 / 200) A way to observe dynamic support and resistance A helper to understand trend alignment, compression, and expansion A non-repainting overlay anchored to the last completed bar A tool intended for discretionary and educational analysis What this indicator IS NOT It is not a buy or sell signal generator It does not predict future price It is not a trading strategy It does not provide financial or investment advice It does not guarantee profitability How it works The indicator plots four Exponential Moving Averages: EMA 20 EMA 50 EMA 100 EMA 200 Each EMA can optionally display: A horizontal price floor line extending to the right A value tag showing the exact EMA price All tags and price floors are calculated using the latest confirmed bar and extend forward only for visual reference. Nothing is projected into the future, and nothing repaints. The Stick Right behavior ensures that EMA labels remain readable and stable when scrolling or changing chart zoom levels. How traders typically use it Traders commonly use this indicator to: Identify trend direction and EMA stacking Observe how price reacts around EMA zones Combine EMA structure with their own price action, volume, or higher-timeframe analysis Maintain a clean chart while keeping key structural levels visible Disclaimer This script is provided for educational and informational purposes only. It does not constitute financial advice, trading advice, or investment recommendations. Trading involves risk, and users are fully responsible for their own decisions.
Indicador Pine Script®
por rivero8894
Al Brooks H2/L2 IndicatorWhat This Indicator Is This is a price-action execution tool based on Al Brooks concepts. Its job is not to find every H2 or L2 — it filters aggressively to show only the ones worth trading. Think of it as answering one question in real time: “Is this H2 / L2 good enough to take?” What It Detects 1️⃣ H2 / L2 (Second-Entry Pullbacks) H2 = second attempt up in a bull trend L2 = second attempt down in a bear trend Uses confirmed pivots, so signals do not repaint 2️⃣ A+ Signal Bar Quality A signal only qualifies if the breakout bar is strong: Adequate range relative to ATR Large body Close near the extreme Optional follow-through confirmation Weak bars are ignored. 3️⃣ Trend vs Trading Range Filter The indicator skips trades in Trading Ranges by checking: Flat EMA slope Price chopping around the EMA Heavy bar overlap This removes the majority of low-probability H2/L2s. 4️⃣ Microchannel Suppression (Late Trends) If the trend is overextended (tight microchannel): H2/L2 signals are skipped Prevents buying the top or selling the bottom 5️⃣ Wedges & Flags (Brooks Context) When applicable, trades are tagged as: W = Wedge pullback (3 pushes) F = Flag (tight channel pullback) W+F = both present These are context tags, not extra signals. What It Shows on the Chart ✅ Tradable Signals UP → Long H2 DN → Short L2 Printed only when all filters pass Clearly anchored to price These are the only trades the script recommends. 🔔 Alerts Alerts fire only on tradable setups No alerts for skipped or marginal signals Suitable for live execution What It Does Not Do It does not predict outcomes It does not trade for you It does not show every H2/L2 It intentionally removes most setups so you focus on quality, not frequency. How to Trade With It (Recommended) Only act on UP / DN labels Confirm nearby support/resistance visually Use Brooks-style risk: Stop beyond signal bar Skip trades near measured-move targets Ignore everything else Bottom Line This indicator is a professional-grade Brooks execution filter. It helps you: Trade fewer setups Avoid trading ranges Avoid late trends Focus on A+ second entries only
Indicador Pine Script®
por bonafide_
RSI(5) on RSI(14)RSI(5) on RSI(14) This indicator is displayed in a separate pane and works on all timeframes. It combines a classic RSI with a secondary RSI calculated on the RSI values themselves, allowing deeper analysis of momentum and internal strength. Indicator Logic The indicator consists of two components: RSI (period 14) calculated from price data (default: Close). RSI (period 5) calculated on the values of RSI(14), equivalent to Previous Indicator’s Data in MetaTrader. This structure helps to: identify overbought and oversold zones using the primary RSI, observe acceleration, deceleration, and momentum shifts inside the RSI itself using the secondary RSI. Visualization RSI(14) is plotted as a configurable colored line. RSI(5) on RSI(14) is plotted as a thin black line on top of the main RSI. The indicator scale is fixed between 0 and 100. Levels 20 and 80 — configurable oversold and overbought levels: adjustable values, customizable color, line width, line style (solid, dashed, dotted). 50 level: black, thin, dashed, acts as a mid-level equilibrium reference. Inputs Users can adjust: RSI(14) period, RSI(5) period, price source for RSI(14), colors and line widths, level values and styles for 20 / 80. Use Cases This indicator can be used for: momentum and strength analysis, detecting internal RSI momentum shifts, trend confirmation and filtering, standalone oscillator analysis or as part of a larger trading system.
Indicador Pine Script®
por Benepamm
Profile volume deviationThis indicator calculates the width of the 70% Value Area of a moving volume profile over a defined number of candles. It begins by identifying the highest and lowest points of the period under review, then divides this price range into several segments. For each candle, the volume is added to the segment corresponding to the closing price, which allows a volume profile to be constructed. Once the total volume is known, the indicator identifies the most traded segment, called the Point of Control. From this central point, it gradually widens the area upwards and downwards by adding the most voluminous adjacent segments until it covers 70% of the total volume: this is the Value Area. The lower and upper limits of this area are then converted into prices, and their difference gives the width of the Value Area. This width can be displayed directly as a price value or as a percentage of the current price. The indicator is mainly used to assess the state of the market: a narrow Value Area suggests a phase of compression or range, while a wide Value Area indicates a period of expansion and strong activity.
Indicador Pine Script®
por NTX_Plasma
Trend Strength TableThis strategy is a time-in-trend awareness and exhaustion framework rather than a directional signal by itself. It uses a Hull Moving Average–based trend definition to continuously identify whether the market is in a bullish or bearish phase, then measures how long that trend typically lasts by averaging the durations of recent historical trends in the same direction. As a new trend unfolds, the system tracks how many bars have already closed and compares that progress against the trend’s historical “probable length.” The result is a live, adaptive estimate of where the current move sits within its natural life cycle, independent of price targets or indicators like RSI or MACD. The real edge comes from contextual trade management. By converting elapsed trend time into a percentage of the probable trend length, the table classifies the move into Strong, Medium, Declining, or Exhaustion phases. Early stages (Strong/Medium) favor continuation trades and holding winners, while later stages (Declining/Exhaustion) warn against chasing momentum and instead encourage scaling out, tightening stops, or looking for reversal and mean-reversion setups. In practice, this strategy acts as a risk-timing overlay—helping traders decide when to press, when to be patient, and when to stand down—rather than telling them what direction to trade. LONG TRADE RULES (Bullish Trend) ✅ Long Entry Recommendations Only consider longs when the table shows a Bullish trend. Best entry zones by Trend Strength: Strong (< 25%) ✅ Best continuation entries Enter on: First pullback to VWAP / 9–20 EMA Bullish engulfing candle ORB continuation Bias: Aggressive size allowed Expect expansion Medium (25%–50%) ✅ Still valid, but be selective Enter on: Higher low + strong close Break-and-hold above key level Bias: Normal size Avoid chasing extended candles Declining (50%–75%) ⚠️ Late trend Only enter if: Tight consolidation breakout Strong volume confirmation Bias: Reduced size Faster profit-taking Exhaustion (> 75%) ❌ No new longs Trend is statistically mature Look for: Failed breakouts Bearish rejection candles 🎯 Long Exit Rules Partial exits Take first scale at 50%–75% Full exit Mandatory by Exhaustion Stop management Strong/Medium → structure-based stop Declining → tighten aggressively Hard rule Do not hold longs once trend flips bearish SHORT TRADE RULES (Bearish Trend) ✅ Short Entry Recommendations Only consider shorts when the table shows a Bearish trend. Best entry zones by Trend Strength: Strong (< 25%) ✅ Best short continuation zone Enter on: Failed bounce into resistance VWAP / EMA rejection ORB breakdown Bias: Aggressive size allowed Medium (25%–50%) ✅ Good continuation, slower Enter on: Lower high confirmation Breakdown after consolidation Bias: Normal size Declining (50%–75%) ⚠️ Trend is aging Only enter: On clean breakdowns With defined risk Bias: Reduced size Exhaustion (> 75%) ❌ No new shorts Expect: Short-covering Dead-cat bounces Reversal attempts 🎯 Short Exit Rules Partial exits Begin scaling out at 50%–75% Full exit Required at Exhaustion Stop management Strong/Medium → above lower high Declining → tight trailing stop Hard rule Cover all shorts if trend flips bullish 🔥 Power Rules (Do NOT break these) Never open new trades in Exhaustion Strong = press, Declining = protect Trend strength dictates size, not conviction Direction comes from trend, timing comes from price
Indicador Pine Script®
por yassermalik1022
Double Trisectional Volatility BandsDouble Trisectional Volatility Bands (DTVB) | MisinkoMaster Double Trisectional Volatility Bands (DTVB) is a volatility-based trend indicator designed to create smooth yet adaptive price envelopes capable of tracking trend structure while reacting to volatility expansion. The indicator emphasizes stability during consolidation while clearly highlighting strong price moves beyond normal market behavior. This makes DTVB particularly suitable for traders seeking structured volatility envelopes that remain stable during noise yet clearly identify breakout and trend continuation phases. Key Features Double-layer trisectional smoothing for stable trend structure Adaptive volatility bands responding to changing market conditions Clear breakout detection through band expansion and price crossings Dynamic candle coloring for immediate trend visualization Automatic Long and Short markers on confirmed trend shifts Designed to balance smooth structure with volatility responsiveness Suitable for both breakout and trend-following strategies How It Works DTVB uses a multi-stage smoothing process that divides price behavior into layered components, allowing the central structure to remain smooth while still reacting to changing volatility conditions. Instead of relying on a single smoothing pass, the indicator blends multiple smoothing layers to maintain structural consistency across varying market environments. A volatility component then measures how far price deviates from this smoothed structure, and adaptive bands are constructed around the central value. When price moves outside these envelopes, it signals abnormal movement or potential trend continuation. The result is a band system that stays stable during sideways markets yet expands when volatility increases, helping traders detect meaningful price transitions. Inputs Overview Source — Selects the price data used for calculations Lookback Period — Controls the primary smoothing length used in the band structure Factor — Adjusts the volatility multiplier controlling band width Volatility Lookback — Defines the smoothing period applied to volatility calculations Usage Notes Designed for traders seeking smooth volatility envelopes Breakouts occur when price crosses outside the bands Band expansions often accompany strong trend movements Works well for trend continuation and breakout confirmation Best used alongside price structure or confirmation indicators Parameters should be tuned according to asset volatility and timeframe Summary Double Trisectional Volatility Bands provide a smooth yet adaptive volatility envelope designed to highlight abnormal price movements while maintaining stable structure during consolidation. It is well suited for traders seeking structured breakout and volatility-aware trend analysis tools.
Indicador Pine Script®
por MisinkoMaster
2