Empiece

Alma

[TL5] ALMA 12-20 Trend with HA barcolorThis tool is designed for traders who prefer minimal clutter, strong visual trend confirmation, and structure awareness. 🔹 Core Concept This indicator blends: ALMA 12 (Fast) → Early momentum detection ALMA 20 (Slow) → Trend bias confirmation Heikin Ashi structure analysis → Strength/weakness visualization Dynamic background bias → Immediate directional context The result is a smooth, low-lag trend framework that works especially well for: Intraday trading Scalping Trend continuation setups Pullback entries 🔸 How It Works 1️⃣ Dual ALMA Trend Engine The script uses the Arnaud Legoux Moving Average (ALMA), known for: Reduced lag Better smoothness than traditional EMA/SMA Strong trend filtering Trend Logic: Fast ALMA rising → Short-term bullish pressure Fast ALMA falling → Short-term bearish pressure Fast ALMA above Slow ALMA → Bullish bias Fast ALMA below Slow ALMA → Bearish bias Both lines are plotted with layered dotted/dashed styling for enhanced clarity. 2️⃣ Background Trend Bias 🟢 Light Green Background → Fast ALMA trending up 🔴 Light Red Background → Fast ALMA trending down This provides instant directional awareness without adding noise. 3️⃣ Heikin Ashi Structure Bar Coloring Heikin Ashi data is internally calculated and used strictly for structure interpretation. Bar colors: 🔵 Blue → Strong bullish candle (no lower wick) 🔴 Red → Strong bearish candle (no upper wick) 🟢 Lime → Bullish HA candle 🟠 Orange → Bearish HA candle ⚪ White → Neutral This helps identify: Strong momentum candles Trend continuation Early exhaustion signals ⚙️ Inputs ALMA Fast Length (default: 12) ALMA Slow Length (default: 20) ALMA Offset (default: 0.85) ALMA Sigma (default: 8) These parameters allow fine-tuning between responsiveness and smoothness. 🎯 Ideal Use Cases Trend continuation scalping Pullback entries within a dominant bias Structure confirmation on lower timeframes Multi-timeframe alignment systems Works well across: Indices Forex Crypto Commodities 💡 Trading Tips Trade in the direction of background bias. Look for strong HA candles (blue/red) during alignment of Fast and Slow ALMA. Use higher timeframe confirmation for stronger probability setups. Avoid ranging conditions when ALMAs are flat and overlapping. ⚠️ Disclaimer This script is for educational purposes only. It does not constitute financial advice. Always manage risk properly.
Indicador Pine Script®
por AquaTickTrader
[TL5] Trended and Blended (EMA . ALMA . RSI) Trended and Blended (SMA • ALMA • RSI) Author: AquaTickTrader Overview Trended and Blended is a trend-following overlay indicator designed to help traders align with dominant market direction while filtering weak momentum conditions. This script combines: Short-term structure (8-period SMA) Multi-layer ALMA trend stack (30 / 80 / 145) RSI-based momentum bias Visual background confirmation The goal is simple: Stay aligned with trend. Avoid low-momentum chop. Improve pullback timing. How It Works 1) SMA 8 – Short-Term Structure The 8-period Simple Moving Average reacts quickly to price movement and highlights immediate directional shifts. Green = rising slope Red = falling slope It helps identify pullbacks and short-term entry timing within the broader trend. 2) ALMA Trend Stack (30 / 80 / 145) The script uses Arnaud Legoux Moving Averages (ALMA) for smoother trend detection with reduced lag. ALMA 30 → Fast trend ALMA 80 → Intermediate trend ALMA 145 → Macro bias Color logic: Rising = bullish tone Falling = bearish tone When all three align in the same direction, trend conditions are strong. When they flatten or conflict, conditions may be ranging. 3) RSI Momentum Bias A 14-period RSI determines background bias: Light Green Background → RSI > 50 (bullish momentum) Light Red Background → RSI < 50 (bearish momentum) This helps avoid trading against momentum even when moving averages appear aligned. How to Use Bullish Conditions ALMA 145 and 80 rising ALMA 30 rising SMA 8 turns up after pullback RSI background green Look for pullbacks into ALMA 30 or ALMA 80. Bearish Conditions ALMA 145 and 80 falling ALMA 30 falling SMA 8 turns down after rally RSI background red Look for rallies into resistance areas. Choppy Market Warning Frequent color changes Flat ALMAs Rapid background flips These conditions suggest consolidation. Best For Trend continuation trading Pullback entries Intraday momentum trading Swing trading Works on all timeframes and markets. Design Philosophy This indicator does not attempt to predict reversals. It is designed to: Keep traders aligned with dominant flow Reduce counter-trend trades Improve timing inside established trends Disclaimer This script is for educational and informational purposes only. It does not constitute financial advice. Always use proper risk management and confirm signals with your own analysis.
Indicador Pine Script®
por AquaTickTrader
Multi-Condition Supertrend Strategy (ATR + ALMA + WVMA)This strategy enhances the traditional Supertrend by combining ATR-based volatility bands with dual moving average confirmation to improve trade selection and reduce false entries. Core Components: • ATR Period & Factor – Generates dynamic Supertrend bands based on market volatility. • ALMA (Arnaud Legoux Moving Average) – Provides low-lag trend smoothing for directional bias. • WVMA (Weighted Volume Moving Average) – Incorporates volume-weighted confirmation to filter weak or low-conviction moves. Strategy Logic Long positions are taken when: Price aligns with bullish Supertrend direction ALMA confirms upward trend structure WVMA supports momentum through volume-weighted bias This is a long only strategy Objective The strategy aims to: Reduce whipsaws during consolidation Improve trend confirmation in volatile markets Increase trade quality through multi-factor validation Fully customizable parameters (Parameters changed inside PineScript not input, only ATR and Factors can be changed within settings, the rest inside the PineScript tab. This is a systematic, rule-based approach intended for traders who want structured trend participation rather than discretionary entries.
Estrategia Pine Script®
por stanislavbenov04
[TL5 1-min Scalping Tool] MTF SMA8 & MTF ALMA30The TL5 1-min Scalping Tool is a multi-timeframe moving average framework designed specifically for 1-minute (or lower) charts. It combines SMA (Simple Moving Average) and ALMA (Arnaud Legoux Moving Average) to visualize short-, medium-, and higher-timeframe trend structure directly on lower timeframe charts. This tool is ideal for traders who want to trade pullbacks in continuation trend regimes, helping you align micro and macro trends while scalping or intraday trading. Key Features: Multi-length SMA & ALMA: SMA 8 → Micro structure (1m) SMA 40 → Approx. 5m structure SMA 120 → Approx. 15m structure SMA 480 → Approx. 60m structure ALMA 30 → Micro momentum smoothing (1m) ALMA 150 → Approx. 5m momentum bias ALMA 450 → Approx. 15m momentum structure ALMA 1800 → Approx. 60m higher timeframe bias Visual logic: SMA lines: GREEN when rising, ORANGE when falling ALMA lines: BLUE when rising, RED when falling Line thickness increases with timeframe importance How to use: Apply on 1-minute (or lower) charts Observe trend alignment across SMA & ALMA Trade pullbacks in the direction of stacked averages for trend continuation SMA confirms structure, ALMA smooths momentum Best suited for: 1-minute (or lower TF) scalping Intraday trading Futures and indices Gold (XAUUSD) Multi-timeframe trend alignment Important: This indicator does not provide buy/sell signals. It’s a visualization tool for trend structure and momentum alignment. Always combine with proper risk management and trading discipline.
Indicador Pine Script®
por AquaTickTrader
[TL5 MACD] Moving Average Convergence Divergence is an enhanced version of the traditional Moving Average Convergence Divergence (MACD) indicator. It preserves the standard MACD calculation but integrates: RSI-based market bias WMA-smoothed momentum confirmation ALMA adaptive trend filtering Short-term structure alignment via SMA(8) Intelligent dynamic color logic This design helps reduce weak crossovers and visually align momentum with structural trend context. What Makes This Different from Default MACD? This script does NOT modify the core MACD math. Instead, it enhances how momentum is interpreted and visually communicated: 1️⃣ RSI Bias Background RSI(14) above 50 → Bullish environment (Green background) RSI(14) below 50 → Bearish environment (Red background) This quickly identifies market regime. 2️⃣ WMA-Smoothed RSI RSI is smoothed using WMA(14) to confirm momentum slope direction. 3️⃣ ALMA(30) Adaptive Trend Filter ALMA reduces noise while maintaining responsiveness. The zero line color reflects ALMA slope direction: Blue → Trend rising Red → Trend falling 4️⃣ SMA(8) Short-Term Momentum Alignment Used to validate structural alignment before confirming MACD strength. 5️⃣ Dynamic Line Coloring MACD and Signal line colors adapt based on: SMA(8) slope ALMA alignment WMA(RSI) momentum slope This helps visually filter weak signals. How to Use Strong Bullish Conditions RSI > 50 SMA(8) above ALMA(30) MACD & Signal turning green/lime MACD above zero line Strong Bearish Conditions RSI < 50 SMA(8) below ALMA(30) MACD & Signal turning red MACD below zero line Transitional Phases Yellow / Gray colors indicate weakening momentum or structural disagreement. Best Used For Intraday trading Trend continuation setups Pullback entries within strong structure Momentum confirmation alongside price action Works well on: Forex Indices Crypto Commodities (especially trending instruments) Inputs Source Fast Length Slow Length Signal Length Oscillator MA type (EMA or SMA) Signal MA type (EMA or SMA) Notes Histogram is available but hidden by default. Core MACD calculation remains mathematically standard. This script enhances interpretation, not the formula itself. Not intended as standalone financial advice. Disclaimer This indicator is for educational purposes only. Trading involves risk. Always use proper risk management.
Indicador Pine Script®
por AquaTickTrader
[TL5 SMA] SMA-ALMA Momentum SystemA structured multi-moving-average framework designed to identify trend alignment, momentum shifts, and directional bias using a clean and intuitive visual system. This indicator combines short-term responsiveness with medium- and long-term structure to help traders quickly assess market conditions without clutter. 🔍 What This Indicator Does This script plots: • SMA 8 → Short-term momentum • ALMA 30 → Adaptive smoothing filter to reduce noise • SMA 20 → Short-term structure level • SMA 50 → Medium-term trend reference • SMA 77 → Long-term filter (colored by smoothed RSI momentum) • RSI Background Bias → Visual bullish/bearish environment filter 🎯 Core Concept The framework is built around trend stacking and momentum confirmation: • When 8 > 20 > 50 > 77 → Strong bullish structure • When 8 < 20 < 50 < 77 → Strong bearish structure • RSI above 50 → Bullish market bias • RSI below 50 → Bearish market bias • SMA 77 color reflects smoothed RSI momentum direction This allows traders to: Identify trend continuation zones Avoid counter-trend trades Quickly assess structural alignment Filter noise using ALMA 📊 How It Can Be Used ✔ Intraday trading ✔ Swing trading ✔ Trend continuation entries ✔ Pullback setups within dominant trend ✔ Bias confirmation tool Works well on indices, forex, crypto, and commodities. ⚠️ Disclaimer This script is for educational purposes only and does not constitute financial advice. Always use proper risk management.
Indicador Pine Script®
por AquaTickTrader
ALMA SD Bands | RakoQuantALMA SD Bands | RakoQuant is a volatility-regime band system built from first principles using an institutional smoothing framework: an ALMA baseline combined with ALMA-smoothed standard deviation width, designed for clean trend containment and controlled regime classification. This tool is part of the RakoQuant protected research line, focusing on minimal noise, persistent state logic, and volatility-aware market structure rather than traditional reactive Bollinger-style band behavior. Core Concept This indicator answers one key structural question: Is price operating inside a stable volatility regime, or transitioning into a new directional band expansion phase? Unlike classical deviation band systems that fluctuate aggressively candle-to-candle, ALMA SD Bands introduce: * Ultra-smooth baseline structure * Smoothed volatility width * Persistent directional regime logic * Deadband-based flip stabilization The result is a clean institutional containment model rather than noisy retail band plotting. How It Works 1. ALMA Baseline (Institutional Mean Structure) The centerline of the system is computed using: Arnaud Legoux Moving Average (ALMA) ALMA provides: * Reduced lag compared to EMA * Superior smoothness compared to SMA * Stable regime structure across crypto volatility This baseline acts as the equilibrium axis of the band system. 2. Standard Deviation Volatility Width (Smoothed) Band width is driven by volatility, measured through standard deviation, with two selectable modes: * Price Standard Deviation * Return Standard Deviation (log-return volatility) Rather than using raw deviation directly, volatility is passed through a second ALMA smoothing layer: Smoothed Volatility = ALMA(StdDev) This eliminates the jitter and band shaking that defines most Bollinger-type systems. 3. Adaptive Containment Bands Final bands are constructed as: * Upper Band = ALMA Basis + Multiplier × Smoothed Volatility * Lower Band = ALMA Basis − Multiplier × Smoothed Volatility Unlike traditional ±2σ envelopes, the multiplier is intentionally adjustable and tuned for regime containment rather than extreme tagging. 4. Deadband Regime Engine (Persistent State Logic) A defining feature of this protected release is its regime persistence model. Instead of flipping trend bias instantly, the script applies a volatility-scaled deadband buffer: * Bull regime activates only above Basis + Deadband * Bear regime activates only below Basis − Deadband This removes micro-flips and produces a true structural regime state: * Bullish containment (green) * Bearish containment (red) * Neutral transition zone suppression Regime state persists until a confirmed boundary transition occurs. Visual Engine ALMA SD Bands follows the RakoQuant minimal institutional plotting standard: * Active volatility bands only * Smooth containment fill * Optional candle painting by regime bias * Ultra-clean overlays suitable for confluence stacking This indicator is designed as a structural layer, not a clutter generator. How To Use ✅ Volatility containment framework
✅ Trend regime bias overlay
✅ Expansion / contraction classifier
✅ Portfolio directional filter (RSPS compatible) Recommended workflow: * Trade long only during bullish regime containment * Defensive during bearish containment * Watch for regime flips as volatility transition events * Combine with momentum triggers for execution Best environments: * 4H–1D swing trend structure * Volatility breakout classification * Institutional band containment systems Screenshot Placement 📸 Example chart / screenshot:
Indicador Pine Script®
por RakoQuant
1
[TL5 Shahnaz] %R + RSI Heatmap + ALMAThis indicator is a multi-layer momentum and trend confirmation tool designed for discretionary traders. It blends Williams %R, RSI-based market bias, and an ALMA moving-average stack to help identify momentum shifts, trend strength, and exhaustion zones. The script does not repaint and works on all markets and timeframes. 🔹 Components 1️⃣ Williams %R (Momentum Core) Measures short-term momentum and overbought/oversold conditions Key zones: Above −40 → bullish momentum Below −60 → bearish momentum Line color adapts to momentum strength and direction 2️⃣ RSI Heatmap (Market Bias) Background color reflects RSI strength or weakness Green shades indicate bullish pressure Red shades indicate bearish pressure Neutral tones suggest consolidation or transition Helps visually confirm momentum context without extra plots 3️⃣ ALMA Trend Stack (Trend Direction & Slope) Uses multiple ALMA (Arnaud Legoux Moving Average) periods Smooth, low-lag trend representation Slope label on the latest bar shows short-term trend acceleration Useful as dynamic support/resistance and trend filter 🧠 How to Use Look for %R momentum alignment with RSI heatmap bias Use ALMA direction and slope to confirm trend continuation Best used for: Trend confirmation Momentum timing Trade management and filtering Works well with price action and higher-timeframe bias ⚠️ Important Notes This indicator does not generate buy/sell signals Designed for confirmation, not standalone trading Always use proper risk management Suitable for stocks, crypto, forex, and indices
Indicador Pine Script®
por AquaTickTrader
Stabilized HMA ScalperStabilized HMA Scalper / Stab. HMA 2.0 Stabilized HMA Scalper is a visual trend-structure overlay indicator designed to highlight directional momentum, trend alignment, and market state through a combination of adaptive moving averages and contextual visual cues. The indicator blends a Hull Moving Average (HMA) for responsiveness with an ALMA-based baseline filter to stabilize trend interpretation and reduce noise. The result is a clean, visually expressive framework for reading market structure directly on the price chart. Core Design Philosophy This script is built around trend confirmation and state visualization, not prediction or automation. All elements are calculated on confirmed bar closes and do not repaint. The indicator focuses on three analytical dimensions: 1. Dual Moving Average Structure Hull Moving Average (HMA) Acts as the primary momentum curve. Designed for fast reaction to directional changes. Slope behavior is used to infer momentum expansion or contraction. ALMA Baseline Filter Provides a stabilizing reference for broader trend context. Helps distinguish directional movement from short-term fluctuations. Used as a structural filter rather than a trigger mechanism. 2. Trend State Visualization When HMA slope and price position relative to the ALMA baseline align, the indicator visually highlights the active market state: Bullish alignment: upward momentum with supportive structure Bearish alignment: downward momentum with confirming structure Neutral / range: mixed conditions or transitional phases A dynamic gradient fill between HMA and ALMA visually reinforces this alignment, offering an immediate understanding of trend strength and continuity. 3. Visual Markers & Labels Discrete chart markers may appear at moments when momentum structure transitions into a new aligned state. These markers are contextual annotations, intended to draw attention to changes in trend conditions rather than to provide standalone decisions. They are based solely on historical price data and are fully non-repainting. Dashboard An optional on-chart dashboard summarizes the current market state classification (Bullish / Bearish / Range) based on the internal trend logic. Position and size are fully configurable. Designed for at-a-glance situational awareness. Reflects the same logic used in the chart visuals. Usage Disclaimer This indicator is provided for technical analysis and educational purposes only. It does not generate financial advice or guarantee outcomes and should be used as part of a broader analytical workflow.
Indicador Pine Script®
por Horazio
ALMA & EMA Ribbon by zdmreThis indicator combines a unique trend-following signal with a classic EMA ribbon to provide a clear view of the market trend. The main signal line is not based on a typical ATR. Instead, it uses an Arnaud Legoux Moving Average (ALMA) as its baseline and calculates support/resistance bands using Standard Deviation. This creates a responsive trend line that adapts well to volatility. This is paired with a simple EMA Ribbon to help confirm momentum. What It Does ALMA + SD Trend Line: This is the core of the indicator. It uses an ALMA as the baseline (instead of a simple MA) and Standard Deviation for the bands. This tends to be more responsive than many traditional trend-following indicators. Buy/Sell Signals: Simple "B" and "S" labels appear on your chart when the trend is calculated to have changed direction. EMA Ribbon: A standard Fast/Slow EMA ribbon is plotted to give you a secondary confirmation of momentum. The fill between the EMAs changes color (green for bull, red for bear). On-Screen Dashboard: A clean info panel in the corner shows you the current status of all components at a glance: Current Signal (Long/Short) Price vs. Trend Line (Above/Below) Trend Strength (%) EMA Trend (Bullish/Bearish) Momentum Fully Customizable: You can toggle every visual element on or off (the signals, the ribbon, the bar coloring, the dashboard) to keep your chart clean. Settings Trend Settings: Factor: This is the main setting. It's the Standard Deviation multiplier. A higher value makes the line less sensitive (fewer signals). A lower value makes it more sensitive (more signals). SD Length: The lookback for the Standard Deviation. ALMA Settings: ALMA Length, Sigma, Offset: Standard controls for the ALMA's smoothness and responsiveness. EMA Ribbon: Fast EMA & Slow EMA: Set the lengths for your ribbon. Visual Settings: Checkboxes to toggle all visual components (signals, ribbon, dashboard, etc.). You can set up alerts in TradingView for the following events: 🟢 Long Signal: Triggers on a new "B" (Buy) signal. 🔴 Short Signal: Triggers on a new "S" (Sell) signal. ⚠️ Price Crossed Trend: Triggers any time the price closes across the main trend line. #DYOR
Indicador Pine Script®
por zdmre
1
AlgoGram Trend Identifier📊 Algogram Trend Identifier (ATI) The Algogram Trend Identifier (ATI) is a powerful trend-following oscillator designed to help traders identify market direction, momentum strength, divergences, and consolidation zones across multiple timeframes. 🔑 Key Features: Multi-Timeframe Presets – Choose from 5m, 15m (default), 30m, 1h, and Daily for optimized settings. Adaptive ALMA Calculation – Uses ALMA smoothing with dynamic thresholds to detect clean trend shifts. Trend Highlighting – Visual coloring of oscillator and optional bar coloring for quick market bias recognition. Customizable Thresholds & Bands – Fine-tune upper/lower thresholds, consolidation zones, and band multipliers. Consolidation Detection – Highlights when the market is moving sideways with adjustable parameters. Divergence Detection – Automatically detects bullish & bearish divergences with optional lines and dots. Dynamic Alerts – Built-in alerts for: Crossing thresholds Zero line crosses Uptrend / Downtrend detection Bullish / Bearish divergences RMS consolidation breakouts 🎯 How to Use: Above Zero Line → Bullish trend bias. Below Zero Line → Bearish trend bias. Consolidation Zone → Market may range or prepare for breakout. Bullish Divergence → Potential reversal to upside. Bearish Divergence → Potential reversal to downside. ⚡ Best For: Swing Traders, Scalpers, and Positional Traders Identifying trend strength, early reversals, and breakout opportunities Works on stocks, crypto, forex, and indices
Indicador Pine Script®
por AlgoGram
🌊 ALMA BandsTrend Architect Suite Lite - ALMA Bands - Adaptive Moving Average System Simple implementation of ALMA (Arnaud Legoux Moving Average) bands from the Trend Architect Suite. Why ALMA over Traditional EMA Bands? Superior Smoothness: ALMA combines the best of both SMA and EMA by using Gaussian filters to reduce noise while maintaining responsiveness Reduced Lag: The offset parameter allows fine-tuning between minimal lag and maximum smoothness Advanced Weighting: Uses a sophisticated weighted algorithm that reduces false signals compared to traditional moving averages Configurable Phase: The offset parameter (0-1) controls the phase shift, allowing you to balance between smoothness and responsiveness Features: Dual ALMA lines with customizable periods, offsets, and sigma values Dynamic fill coloring (cyan for bullish, red for bearish trends) Clean crossover alerts for trend changes Fully customizable appearance and sensitivity Settings: Default configuration uses 20-period ALMAs with different offset values (0.85 vs 0.77) All parameters are adjustable to fit your trading style Use Case: Trend-following system suitable for any timeframe. Best used in conjunction with other analysis for confirmation.
Indicador Pine Script®
por B3AR_Trades
2
Alma SD SuperTrend | OquantAlma SD SuperTrend | Oquant The "Alma SD SuperTrend | Oquant" is a trend-following indicator that integrates the Arnaud Legoux Moving Average (ALMA) with a SuperTrend calculation based on standard deviation (SD). Designed to quickly identify and follow market trends while reducing noise, this script provides buy and sell signals for traders across various assets and timeframes. This script offers a unique approach by combining ALMA with a SuperTrend framework that uses standard deviation instead of the traditional Average True Range (ATR). This implementation focuses on fast trend detection with minimized noise, making it suitable for trend-following or swing trading strategies. The script’s customizable parameters allow traders to adapt it to their preferred trading style. How It Works Arnaud Legoux Moving Average (ALMA): ALMA is an advanced moving average that applies a Gaussian filter to smooth price data, reducing market noise while preserving responsiveness to price changes. It uses three parameters: Length: Sets the lookback period for smoothing. Longer periods produce smoother results. Offset: Shifts the moving average toward recent prices. Higher offsets emphasize newer data for faster trend detection. Sigma controls the smoothness and lag of the Alma by adjusting the spread of the Gaussian distribution used in the calculation. Standard Deviation (SD) Calculation: The script calculates the standard deviation of the price over a specified period to measure volatility. SD measures how much the prices deviate from its mean, offering a statistical perspective on market volatility. This is used to create dynamic upper and lower bands around the ALMA line, adjusted by a user-defined factor. The bands expand in volatile markets and contract in stable conditions, helping in trend detection. SuperTrend Logic: The script generates a SuperTrend line that dynamically tracks market trends by switching between upper and lower volatility bands based on price movement. Here's how it works: The SuperTrend line is calculated using the ALMA (Arnaud Legoux Moving Average) as a baseline, with upper and lower bands created by adding and subtracting a multiple(Factor) of the standard deviation (SD) from the ALMA. When the price moves above the upper band, the SuperTrend line shifts to the lower band, indicating a bullish trend (potential buy signal). When the price falls below the lower band, the SuperTrend line switches to the upper band, signaling a bearish trend (potential sell signal). To avoid quick, unreliable changes, this script intelligently adjusts the SuperTrend bands for stability. While the SuperTrend line dynamically follows market movements, it's designed to hold at its previous level if the price doesn't cross a band or confirm a new trend direction. This approach ensures the SuperTrend quickly identifies and follows genuine market trends, providing clear signals while effectively reducing false alerts from short-term price swings. Differences from Traditional SuperTrend: Baseline: The traditional SuperTrend typically uses a hl2((high + low)/2)as its baseline, while this script employs ALMA for a smoother, noise-filtered trend foundation. Volatility Measure: Instead of ATR, this script uses standard deviation to calculate the bands. Standard deviation measures how much the prices vary or spread out from its mean. Visualization: The script plots the SuperTrend line, colors candles to match the trend, and fills the area between the price and the SuperTrend line for visual clarity, helping traders quickly identify trend direction and strength (green for bullish, purple for bearish). How to Use It Add to Chart: Apply the indicator to any market and timeframe. Interpret Signals: Green Line and Candles: Bullish trend (price above the SuperTrend line). Consider long entries. Purple Line and Candles: Bearish trend (price below the SuperTrend line). Consider short entries. Filled Area: The shaded area between price and the SuperTrend line highlights trend direction(green for bullish, purple for bearish). Adjust Inputs: Source: Select the price data to use (e.g., close, open, high, low). Factor: Adjusts band width. Higher values widen bands, reducing sensitivity. SD Length: Period for calculating standard deviation. Longer periods smooth volatility. ALMA Length: Period for ALMA. Longer periods increase smoothness. Alma Offset: Shift the moving average toward recent or older prices. Higher offsets emphasize newer data for faster trend detection. ALMA Sigma control the smoothness and lag of the Alma by adjusting the spread of the Gaussian distribution used in the calculation. Alerts This indicator includes optional built-in alert conditions that notify you when the signal crosses above 0 (long signal, price above upper band) or below 0 (short signal, price below lower band). Enable these alerts to get timely updates on potential trend shifts without constantly monitoring the chart. ⚠️ Disclaimer: This indicator is intended for educational and informational purposes only. Trading/investing involves risk, and past performance does not guarantee future results. Always test and evaluate indicators/strategies before applying them in live markets. Use at your own risk.
Indicador Pine Script®
por oquant
2
ALMA Trend-boxALMA Trend-box — an innovative indicator for detecting trend and consolidation based on the ALMA moving average This indicator combines the Adaptive Laguerre Moving Average (ALMA) with unique visual representations of trend and consolidation zones, providing traders with clearer and deeper insight into current market conditions. Originality and Usefulness Unlike classic indicators based on simple moving averages, ALMA uses a Gaussian weighting function and an offset parameter to reduce lag, resulting in smoother and more accurate trend signals. This indicator not only plots the ALMA but also analyzes the slope angle of the ALMA line, combining it with the price’s position relative to the moving average to identify three key market states: Uptrend (bullish): when the ALMA slope angle is above a defined threshold and the price is above ALMA, Downtrend (bearish): when the slope angle is below a negative threshold and the price is below ALMA, Consolidation or sideways trend: when neither of the above conditions is met. A special contribution is the automatic identification of consolidation zones (periods of weak trend or transition between bullish and bearish phases), visually represented by blue-colored candlesticks on the chart. This feature can help traders better recognize moments when the market is indecisive and adjust their strategies accordingly. How the Indicator Works ALMA is calculated using user-defined parameters — length, offset, and sigma — which can be adjusted for different timeframes and instruments. The slope angle of the ALMA line is calculated based on the difference between the current and previous ALMA values, converted into degrees. Based on the slope angle and the relative price position to ALMA, the indicator determines the trend type and changes the candle colors accordingly: Green for bullish (uptrend), Red for bearish (downtrend), Blue for sideways trend (consolidation). When the slope angle falls within a certain range and the price behavior contradicts the trend, the indicator detects consolidation and displays it graphically through semi-transparent boxes and background color. How to Use This Indicator Use candle colors for quick identification of the current trend and potential trend reversals. Pay attention to consolidation zones marked by boxes (blue candles), as these are potential signals for trend breaks or preparation for stronger price moves. ALMA parameters can be adjusted depending on the timeframe and market volatility, providing flexibility in analysis. The indicator is useful for both short-term scalping strategies and longer-term trend monitoring and position management. Why This Indicator is Useful Many existing trend indicators do not consider the slope angle of the moving average as a quantitative measure of trend strength, nor do they automatically detect consolidations as separate zones. ALMA Trend-box fills this gap by combining sophisticated mathematical processing with simple and intuitive visual representation. This way, users get a tool that helps make decisions based on more objective criteria of trend and consolidation rather than just price location relative to averages.
Indicador Pine Script®
por Aleksin_Aleksandar
3
Weighted Regression Bands (Zeiierman)█ Overview Weighted Regression Bands is a precision-engineered trend and volatility tool designed to adapt to the real market structure instead of reacting to price noise. This indicator analyzes Weighted High/Low medians and applies user-selectable smoothing methods — including Kalman Filtering, ALMA, and custom Linear Regression — to generate a Fair Value line. Around this, it constructs dynamic standard deviation bands that adapt in real-time to market volatility. The result is a visually clean and structurally intelligent trend framework suitable for breakout traders, mean reversion strategies, and trend-driven analysis. █ How It Works ⚪ Structural High/Low Analysis At the heart of this indicator is a custom high/low weighting system. Instead of using just the raw high or low values, it calculates a midline = (high + low) / 2, then applies one of three weighting methods to determine which price zones matter most. Users can select the method using the “Weighted HL Method” setting: Simple Selects the single most dominant median (highest or lowest) in the lookback window. Ideal for fast, reactive signals. Advanced Ranks each bar based on a composite score: median × range × recency. This method highlights structurally meaningful bars that had both volatility and recency. A built-in Kalman filter is applied for extra stability. Smooth Blends multiple bars into a single weighted average using smoothed decay and range. This provides the softest and most stable structural response. ⚪ Smoothing Methods (ALMA / Linear Regression) ALMA provides responsive, low-lag smoothing for fast trend reading. Linear Regression projects the Fair Value forward, ideal for trend modeling. ⚪ Kalman Smoothing Filter Before trend calculations, the indicator applies an optional Kalman-style smoothing filter. This helps: Reduce choppy false shifts in trend, Retain signal clarity during volatile periods, Provide stability for long-term setups. ⚪ Deviation Bands (Dynamic Volatility Envelopes) The indicator builds ±1, ±2, and ±3 standard deviation bands around the fair value line: Calculated from the standard deviation of price, Bands expand and contract based on recent volatility, Visualizes potential overbought/oversold or trending conditions. █ How to Use ⚪ Trend Trading & Filtering Use the Fair Value line to identify the dominant direction. Only trade in the direction of the slope for higher probability setups. ⚪ Volatility-Based Entries Watch for price reaching outer bands (+2σ, +3σ) for possible exhaustion. Mean reversion entries become higher quality when far from Fair Value. █ Settings Length – Lookback for Weighted HL and trend smoothing Deviation Multiplier – Controls how wide the bands are from the fair value line Method – Choose between ALMA or Linear Regression smoothing Smoothing – Strength of Kalman Filter (1 = none, <1 = stronger smoothing) ----------------- Disclaimer The content provided in my scripts, indicators, ideas, algorithms, and systems is for educational and informational purposes only. It does not constitute financial advice, investment recommendations, or a solicitation to buy or sell any financial instruments. I will not accept liability for any loss or damage, including without limitation any loss of profit, which may arise directly or indirectly from the use of or reliance on such information. All investments involve risk, and the past performance of a security, industry, sector, market, financial product, trading strategy, backtest, or individual's trading does not guarantee future results or returns. Investors are fully responsible for any investment decisions they make. Such decisions should be based solely on an evaluation of their financial circumstances, investment objectives, risk tolerance, and liquidity needs.
Indicador Pine Script®
por Zeiierman
11
Adaptive Dual MA Trend FilterAdaptive Dual MA Trend Filter is a versatile Pine Script™ indicator that delivers clear, reliable trend signals using customizable moving averages: Dual‑Stage Filtering – Apply any traditional MA (SMA, EMA, VWMA, HMA, RMA, TEMA, DEMA, FRAMA, TRIMA) or advanced smoothing (ALMA, T3) as your “main” and “filter” MAs. The filter MA is double‑smoothed for noise suppression, then converted into a robust “double‑filtered” baseline. Flexible Inputs – Select lengths, sources (close, high, low, hl2), offsets, sigma, and volume factors to tailor the responsiveness and smoothness to your favorite timeframe or asset class. Intuitive Signals – The script detects confirmed bullish (green) and bearish (red) trend shifts as: Circle marker on the MA line Triangle arrows below/above bars Full candles and MA line colored by current trend Clean Overlay – Works directly on your price chart, with optional semi‑transparent fills for extra visual clarity. Theme Support – Choose from Vibrant, Pastel, Neon, Classic, Monochrome, Solarized, or Material palettes for seamless chart styling. Ideal for swing traders and intraday scalpers alike, Multi‑Source Double‑Filter Trend offers both “set‑and‑forget” simplicity and deep customization for power users. Usage Add to chart → Inputs → tweak MA types/lengths Watch for color changes and markers Combine with volume or momentum filters for entry confirmation Enjoy clearer trend identification and smoother trade signals! Disclaimer This script is for educational and informational purposes only. Not financial advice. Use at your own risk.
Indicador Pine Script®
por Galeen
Ultimate Total MA + ATRIndicator Description (English) Name: Tendencias FX - Multi-Line with Customizable Offsets (1x..6x) This script is a multi-purpose trend-following indicator that calculates a central Moving Average (Mid Line) plus a set of 6 different bands (1x to 6x) above and below that average. Each band is determined by a user-defined ATR length and multiplier. Key features include: Independent MA Types Choose different moving average methods for the Mid Line and for the ATR calculation. Available types: SMA, EMA, WMA, RMA, HMA, and ALMA. Separate Lengths Configure the length of the Mid Line independently from the ATR length. This allows fine-tuning of both the central average and the volatility measure. 6 Customizable Multipliers Bands are calculated for 1x, 2x, 3x, 4x, 5x, and 6x multiples of the chosen ATR. Each level has its own checkbox in the Inputs tab so you can show or hide them at will. Color Dynamics The Mid Line automatically changes color to green when its current value is higher than the previous bar’s value, and red otherwise. All upper/lower bands are rendered in a neutral gray (#787b86) for easy distinction. Time Shift (Offset) An offset parameter allows shifting the entire indicator (Mid Line plus bands) forward (to the right) or backward (to the left) by a certain number of bars. This can help evaluate leads/lags, or compare the past behavior of these lines against future price developments. Check Boxes for Visibility Checkboxes in the Inputs let you toggle 1x..6x band levels. By default, 1x, 2x, and 3x are visible, while 4x, 5x, and 6x are off. Overlay with Shared Price Scale The script is set as overlay=true and uses scale=scale.right, so it draws directly on the main chart and shares the same price axis as your candles. This indicator is ideal if you want: A central MA for trend detection. ATR-based volatility bands (up to 6 multipliers). Full control over the type and length of both the Mid Line MA and the ATR. An optional offset to shift the lines in time for backtesting or forward-projection. Usage Tips In the Inputs tab, customize: Mid Line length and ATR length independently. MA methods for both Mid Line and ATR (SMA, EMA, WMA, RMA, HMA, ALMA). Band visibility via checkboxes for 1x..6x. Offset for shifting lines in time. In the Style tab, you can further customize colors, line widths, and visibility of each element (Mid line, ±1x..±6x). Enjoy exploring different settings to best match your preferred trading style and timeframe!
Indicador Pine Script®
por PriceSpeakers
Dynamic ALMA with signalsEnhanced ALMA with Signals This TradingView indicator is designed to enhance your trading strategy by utilizing the Arnaud Legoux Moving Average (ALMA), a unique moving average that provides smoother price action while minimizing lag. The script not only plots the ALMA line but also dynamically adjusts its parameters based on market volatility to adapt to different trading conditions. Additionally, it highlights potential bounce points off the line, as well as breakout points, giving traders clear signals for potential support, resistance levels, and breakouts. Key Features: Dynamic ALMA Line with Glow Effect: The core of this indicator is the ALMA line, which is dynamically adjusted to market volatility, providing more accurate signals in varying conditions. The line adapts to both trending and consolidating markets by adjusting its sensitivity in real time. A glow effect is created by plotting the ALMA line multiple times with increasing transparency, making it visually distinct. Bounce Detection Signals with Volatility Filter: The script detects and labels potential support and resistance bounces based on the crossover and crossunder of the price with the ALMA line, further filtered by a volatility condition. This helps in filtering out false signals during low-volatility conditions, making the signals more reliable. Visual Enhancements: Custom glow effects and labels for bounce detection enhance chart readability and help traders quickly identify key levels. Inputs: Base Window Size: Sets the number of bars used in calculating the ALMA, allowing traders to adjust the sensitivity of the moving average. This parameter is dynamically adjusted based on current market volatility. Offset: Determines the position of the ALMA curve. Higher values move the curve further away from the price. This value remains constant for stability. Sigma: Controls the smoothness of the ALMA curve; a higher sigma results in a smoother curve. This value also remains constant. ATR Period and Threshold Multiplier: Used to calculate the Average True Range (ATR) for the volatility filter, which determines whether the market conditions are sufficiently volatile to consider bounce signals. How It Works: Dynamic ALMA Calculation: The script calculates the ALMA (Arnaud Legoux Moving Average) using the ta.alma function, dynamically adjusting the window size based on market volatility measured by the ATR (Average True Range). This ensures that the ALMA line remains responsive in high-volatility environments and smooth in low-volatility conditions. Glow Effect: To create a glow effect around the ALMA line, the script plots the ALMA multiple times with varying degrees of transparency. This visual enhancement helps the ALMA line stand out on the chart. Bounce Detection with Volatility Filter: The script uses two conditions to detect potential bounces: Support Bounce: Detected when the low of the bar crosses above the ALMA line (ta.crossover(low, alma)) and the close is above the ALMA, while the volatility filter confirms sufficient market activity. This suggests potential support at the ALMA line. Resistance Bounce: Detected when the high of the bar crosses below the ALMA line (ta.crossunder(high, alma)) and the close is below the ALMA, while the volatility filter confirms sufficient market activity. This indicates potential resistance at the ALMA line. Labeling Bounce Points: When a bounce is detected, the script labels it on the chart: Support Bounces (S): Labeled with a blue "S" below the bar where a support bounce is detected. Resistance Bounces (R): Labeled with a white "R" above the bar where a resistance bounce is detected. Usage: This enhanced indicator helps traders visualize key support and resistance levels more effectively by dynamically adjusting the ALMA moving average to market conditions. By detecting and labeling potential bounce points and filtering these signals based on volatility, traders can better identify entry and exit points in their trading strategy. The dynamic adjustments and visual enhancements make it easier to spot critical levels quickly and adapt to changing market conditions. Customize the inputs to fit your trading style, and use this enhanced ALMA indicator to gain a more refined understanding of market trends, potential reversals, and breakouts.
Indicador Pine Script®
por AI-signals
Versatile Moving Average StrategyVersatile Moving Average Strategy (VMAS) Overview: The Versatile Moving Average Strategy (VMAS) is designed to provide traders with a flexible approach to trend-following, utilizing multiple types of moving averages. This strategy allows for customization in choosing the moving average type and length, catering to various market conditions and trading styles. Key Features: - Multiple Moving Average Types: Choose from SMA, EMA, SMMA (RMA), WMA, VWMA, HULL, LSMA, and ALMA to best suit your trading needs. - Customizable Inputs: Adjust the moving average length, source of price data, and stop-loss source to fine-tune the strategy. - Target Percent: Set the percentage difference between successive profit targets to manage your risk and rewards effectively. - Position Management: Enable or disable long and short positions, allowing for versatility in different market conditions. - Commission and Slippage: The strategy includes realistic commission settings to ensure accurate backtesting results. Strategy Logic: 1. Moving Average Calculation: The selected moving average is calculated based on user-defined parameters. 2. Entry Conditions: - A long position is entered when the entry source crosses over the moving average, if long positions are enabled. - A short position is entered when the entry source crosses under the moving average, if short positions are enabled. 3. Stop-Loss: Positions are closed if the stop-loss source crosses the moving average in the opposite direction. 4. Profit Targets: Multiple profit targets are defined, with each target set at an incremental percentage above (for long positions) or below (for short positions) the entry price. Default Properties: - Account Size: $10000 - Commission: 0.01% per trade - Risk Management: Positions are sized to risk 80% of the equity per trade, because we get very tight stoploss when position is open. - Sample Size: Backtesting has been conducted to ensure a sufficient sample size of trades, ideally more than 100 trades. How to Use: 1. Configure Inputs: Set your preferred moving average type, length, and other input parameters. 2. Enable Positions: Choose whether to enable long, short, or both types of positions. 3. Backtest and Analyze: Run backtests with realistic settings and analyze the results to ensure the strategy aligns with your trading goals. 4. Deploy and Monitor: Once satisfied with the backtesting results, deploy the strategy in a live environment and monitor its performance. This strategy is suitable for traders looking to leverage moving averages in a versatile and customizable manner. Adjust the parameters to match your trading style and market conditions for optimal results. Note: Ensure the strategy settings used for publication are the same as those described here. Always conduct thorough backtesting before deploying any strategy in a live trading environment.
Estrategia Pine Script®
por UnknownUnicorn23356524
3
Nasan Moving AverageNasan Moving Average belong to the group of moving average which provides a high degree of smoothness with very low lag. The calculation process involves several steps to analyze the typical price of a financial asset over specific periods. It starts by computing a simple moving average and standard deviation of the typical price. Then, it standardizes (differencing TP - Average Typical price over previous n periods) the price and applies an inverse hyperbolic sine transformation to the standardized value. The transformed values are summed cumulatively, and various weighted moving averages are calculated to adjust and smooth the data. The final output is a smoothed signal with reduced lag. Input Parameters: len: Differencing length (default 21, Use a minimum of 5 and for lower time frames less than 15 min use values between 300 -3000) len1: Correction Factor Length 1 (default 21, this determines the length of the MA you want , eg. 10 MA, 50 MA, 100 MA, ) len2: Correction Factor Length 2 (default 9, this works best if it is ~ </=1/2 of len1 ) len3: Smoothing Length (default 5, I would not change this and only use if I want to introduce lag where you want to use it for cross over strategies). Differencing and Standardization: The code calculates the standardized price a by differencing the typical price and normalizing it using the mean and standard deviation. This step standardizes the price changes. Transformation: The transformation using logarithms and square roots (b) aim to stabilize the variance and make the distribution more normal-like, improving the robustness of the cumulative sum c. Cumulative Sum: The cumulative sum c of the transformed series helps in integrating the series over time, capturing the overall trend and movement. Correction Factors: Correction factors c1 and c4 adjust the cumulative sum based on weighted averages, to correct any biases or to align it with the typical price. Smoothing: The final result c6 is smoothed using a weighted moving average, reducing noise and making it easier to interpret trends.
Indicador Pine Script®
por federalTacos5392b
ALMA Smoothed Gaussian Moving AverageThis indicator is an altered version of the Gaussian Moving Average (GMA) (Credit to author: © LeafAlgo ). The GMA applies weights to the prices, giving more importance to the values closer to the current period and gradually diminishing the significance of older prices. The ALMA Smoothed Gaussian Moving Average (ASGMA) applies an ALMA smoothing to its price data to minimize lag and provide a more accurate representation of the underlying trend by dynamically adapting to changing market conditions. The Arnaud Legoux Moving Average (ALMA) is a specialized smoothing technique that adjusts the weights of the moving average based on market volatility. Its calculation uses Wavelet Transform techniques which enables this type of smoothing to capture both high-frequency and low-frequency components of a signal or data. The rationale for this mashup between ALMA and Gaussian filtering is to smooth the moving average line over the smoothed price data and produce stronger trend signals. ASGMA serves as a trend-following indicator, identifying both bullish and bearish trends. It provides buy and sell signals indicated by "B" and "S" labels plotted alongside the price data. Additionally, the ASGMA's Exponential Moving Average (EMA) line alternates between green and red, indicating bullish and bearish momentum, respectively. The ASGMA also incorporates two popular momentum indicators, the Relative Strength Index (RSI) and the Chande Momentum Oscillator (CMO). The inclusion of these indicators aims to enhance trend identification and reversal signals. For a strong buy signal, all three indicators (RSI, CMO, and ASGMA) must indicate bullish conditions, resulting in a vertical green line. Conversely, a vertical red line is plotted when all indicators indicate bearish conditions, representing a strong sell signal. The ASGMA, with its unique combination of smoothing techniques and indicator amalgamation, provides traders and investors with powerful analytical tools. It can be applied in trend-following strategies using the regular buy and sell signals generated by labels and the EMA line. Alternatively, the vertical lines offer stronger buy and sell signals. These features aid in identifying potential entry and exit points, thereby enhancing trading decisions and market analysis. However, it is important to remember that the future performance of any trading strategy is fundamentally unknowable, and past results do not guarantee future performance.
Indicador Pine Script®
por profitprotrading
41
AIR Supertrend (Average Interpercentile Range)Supertrend (ST) is a popular stop loss and trend identification script. The simplicity of seeing a clean trend on a chart makes it attractive, yet it is restricted by only allowing the source, length and multiplier to be adjusted, & these tend to have a limited effect on the properties of the identified trend. There is a wide variety of interesting ST scripts on TradingView that give the user more control, but none to my knowledge, based on measuring the statistical dispersion of Average Interpercentile Range (AIR). Two more levels of control: Normally, ATR Average True Range is used to calculate the range in ST. ATR is initially calculated using RMA to smooth out True Range. This script gives the user the option of changing the MA to some more interesting varieties & modifying their parameters. The default range setting when you load the indicator on a chart will be AIR. The real strength of the indicator, however, and the reason I am publishing it, is to release AIR. Play round with the percentile range setting. Lowering it will allow you to stay longer in a trade in a volatile market. Raising it will make it tighter. For comparison, you can switch back the range setting to ATR and load up RMA to see how the original, classic ST plots. Alerts are included in this version. Alway use a stop loss. DISCLAIMER: None of this is financial advice. Credits to these authors, whose hard work inspired parts of this script: @ KivancOzbilgic - SuperTrend @ KioseffTrading - Tillson T3 MA @ cheatcountry - Hann Window Smoothing @ mutantdog - Interquartile Range function in his 'Blaze' script
Indicador Pine Script®
por alphaXiom
Munich GuppyWELCOME to the Munich Guppy! This is a simple moving average indicator that will help you determine the trend of your chart using historical moving averages. The indicator consists of 3 EMA's and one ALMA moving average. Using these 4 moving averages I have programmed the relationship between the moving averages to color the background of your chart. If your background is red, this means that the alma moving average has fallen below the EMA's (EMA1 and EMA 2) as well as (EMA 1 and EMA 2) are postured in a down trending/up trending fashion For example, the 21EMA is greater than the 55EMA, this signals that the chart has been outperforming its intermediate averages. Now if the ALMA is below both the 21ema and 55ema, in this instance, your chart background will become green. The ALMA has color options '+CoC' and '-Coc', this simply means if the candle closes below the alma, it will turn red, if closure above it will turn green. EMA 3 which is default set to 200, has no affect on the color of the background. Now I hope I have thoroughly explained the simplicity of this indicator, if you have any questions leave them below or private message me for any other requests, Good Trading! -CheatCode1
Indicador Pine Script®
por CheatCode1