Signal_transcoder_library

This is my 2nd iteration for sending Signals via Plots. (first one was the 8bit Version)
Now a cleaner approach (thanks for the hints LonesomeTheBlue)
_16bit_encode()
Input a 16 bool Array
Outputs a Float for transmitting via Plot
_16bit_decode()
Input a Float from plot via input-mapping
Outputs a Array of 16 bools
Future Ideas:
Transmitting 2-4 Ints (-127 to 127) and Bools
Added:
f_remap_bits()
here you can mix the channels
array in (16 bits) array remapped out (16 bits)
f_bool_operations()
standard bit operations like:
"and", "or", "not", "nand", "nor", "xor", "xnor",
classic timerblocks (candletimers)
"TP", "TPD", "TON", "TOF"
added MDP
Minimum Deviation Percentage
it will give you the option to filter out signals by only accepting new signals after a minimum move of the close price.
for dca strategys very usefull, as it limits a overinvesting by a triggerhappy indicator.
Added bool funtion "rate"
it counts the bool-in compares it with needed trues in a given range
example: channelin 0 bars 20 trues 10 channelout 1
no other changes
Added:
f_infuse_signal() overloaded function
it does infuse 1 to 8 signals into a 16 elements bool array (for each amount a overload)
with an additional check for the channel provided for -1 < channel <15
example:
f_infuse_signal(int channel1, bool mysignal1, int channel2, bool mysignal 2 , .... , int channel8, bool mysignal8, boolarray)
f_infuse_signal(int channel1, bool mysignal1, boolarray)
Biblioteca Pine
Siguiendo fielmente el espíritu de TradingView, el autor ha publicado este código Pine como una biblioteca de código, permitiendo que otros programadores de Pine en nuestra comunidad puedan volver a utilizarlo. ¡Un brindis por el autor! Puede utilizar esta biblioteca de forma privada o en otras publicaciones de código abierto, pero tenga en cuenta que la reutilización de este código en publicaciones se rige por las Normas internas.
Exención de responsabilidad
Biblioteca Pine
Siguiendo fielmente el espíritu de TradingView, el autor ha publicado este código Pine como una biblioteca de código, permitiendo que otros programadores de Pine en nuestra comunidad puedan volver a utilizarlo. ¡Un brindis por el autor! Puede utilizar esta biblioteca de forma privada o en otras publicaciones de código abierto, pero tenga en cuenta que la reutilización de este código en publicaciones se rige por las Normas internas.