Empiece

Multitimeframe

ADR/ATR Session by LK## **Features** 1. **Custom ADR & ATR Calculation** * Calculates **Average Daily Range (ADR)** and **Average True Range (ATR)** separately for: * **Session timeframe** (default H4 / 06:00–13:00) * **Daily timeframe** * Independent smoothing method selection (**SMA, EMA, RMA, WMA**) for H4 ADR, H4 ATR, Daily ADR, and Daily ATR. 2. **Percentage Metrics** * % of ADR / ATR covered by the **current H4 bar**. * ADR / ATR expressed as a percentage of the **current price**. * % of ADR already reached for the **current day**. * % of Daily ATR vs current day’s True Range. 3. **Dynamic Chart Lines** * Draws **3 lines for H4**: Session Open, ADR High, ADR Low. * Draws **3 lines for Daily**: Daily Open, ADR High, ADR Low. * Lines **extend to the right** so they stay visible across the chart. * Colors and widths are fully customizable. 4. **Real-Time Data Table** * Compact table displaying all ADR/ATR values and percentages. * Adjustable table font size (**tiny, small, normal, large, huge**). * Transparent background option for minimal chart obstruction. 5. **Flexible Session Settings** * Select session start and end time in hours/minutes. * Choose session timezone (chart timezone or major financial centers). * Toggle H4 lines, Daily lines separately. 6. **Lookahead Control** * Option to wait for higher-timeframe candle close before updating values (more accurate, less repainting). --- ## **How to Use** ### **1. Adding the Indicator** * Copy and paste the Pine Script into TradingView’s Pine Editor. * Click **“Add to chart”**. * Make sure your chart supports the higher timeframes you choose (e.g., H4 and Daily). ### **2. Setting Your Session** * **Session Start Hour** & **End Hour** → Defines the intraday session to measure ADR/ATR (default: 06:00–13:00). * **Session Timezone** → Pick “Chart” or a major financial center (e.g., New York, London, Tokyo). ### **3. Choosing Smoothing Methods** * For each ADR/ATR (H4 and Daily), choose: * SMA (Simple) * EMA (Exponential) * RMA (Wilder’s smoothing) * WMA (Weighted) ### **4. Adjusting Chart Display** * **Show H4 Lines** → Displays session open and ADR High/Low for the current H4 session. * **Show Daily Lines** → Displays daily open and ADR High/Low. * Customize line colors and widths. ### **5. Reading the Table** * **H4 Section** * ADR / ATR values for the selected session. * % of ADR/ATR covered by the **current H4 bar**. * ADR/ATR as % of the current price. * **Daily Section** * ADR / ATR for the daily timeframe. * % of ADR already covered by today’s range. * ADR/ATR as % of price. ### **6. Pro Tips** * Use **H4 ADR %** to gauge intraday exhaustion — if current range is near 100%, market may slow or reverse. * Use **Daily ADR %** for swing trade context — if a day has moved beyond its ADR, expect lower continuation probability. * Combine with support/resistance to identify high-probability reversal zones.
Indicador Pine Script®
por kimngan894923
Gann Fan Master – Selectable Base Angle & Fibonacci AnglesGann Fan Master – Selectable Base Angle & Fibonacci Angles This indicator plots a Gann Fan from point A1 through point B1, with full customization over: Base angle selection (8/1, 1/1, 1/8) Main angle set Fibonacci-based angles Up to 10 custom user-defined angles Logarithmic or linear slope calculation Custom fan color and extended line length Perfect for manual chart analysis — you select A1 and B1, the script calculates and draws the fan with labeled angles. How It Works -Select A1 (time & price) and B1 (time & price). -The script calculates the base slope depending on the selected base angle: Linear scale: slope = (B1 − A1) / Δt / base_angle_value Logarithmic scale: slope = (ln(B1) − ln(A1)) / Δt / base_angle_value -Each enabled angle is drawn from A1, extended by the chosen number of bars, and labeled with its value. -Fan color is determined automatically by direction (green for upward, red for downward) or can be overridden. Quick Start -Add the indicator to your chart. -In settings: A1 Time/Price — starting point. B1 Time/Price — second point (defines slope). Base Angle — choose 8/1, 1/1, or 1/8. Extend Fan (Bars) — number of bars to extend lines into the future. Logarithmic Fan Calculation — toggle for log-scale mode. Enable desired angle sets: Main, Fibonacci, or Custom. -Optionally, enable Use Custom Fan Color and set your own color. Settings Enable Fan — master switch. A1 Time/A1 Price, B1 Time/B1 Price — anchor points. Base Angle — 8/1, 1/1, 1/8. Extend Fan (Bars) — extension length. Use Custom Fan Color / Fan Color — manual color override. Main Angles — 1/8, 1/4, 1/3, 1/2, 1/1, 2/1, 3/1, 4/1, 6/1, 8/1. Fibonacci Angles — 0.214, 0.35, 0.382, 0.618, 0.786, 0.886, 0.9335, 1.118, 1.236, 1.382, 1.618. Custom Angles — up to 10 values (dotted lines), labels from the exact value. Usage Tips -Choosing A1 and B1: A1 — significant starting swing high or low. B1 — next key swing to define slope. -Logarithmic scale: Ideal for long-term exponential trends (crypto, growth stocks). Prices must be > 0. -Watch how price reacts to different angles: 1/1 as median trend, fractional for support/resistance, multiples for acceleration/slowdown. Disclaimer This is a technical analysis tool. It is not financial advice. Trading decisions are made at your own risk. Gann Fan Master – Selectable Base Angle & Fibonacci Angles Индикатор строит веер Ганна от точки A1 через точку B1 с полной кастомизацией: Выбор базового угла (8/1, 1/1, 1/8) Набор основных углов Углы Фибоначчи До 10 пользовательских углов Расчёт в логарифмической или линейной шкале Цвет веера по направлению или заданный вручную Настройка длины продления линий Идеально подходит для ручного анализа графика — вы задаёте A1 и B1, а скрипт рассчитывает и строит веер с подписями углов. Как это работает -Задайте A1 (время и цена) и B1 (время и цена). -Скрипт рассчитывает базовый наклон в зависимости от выбранного базового угла: Линейная шкала: наклон = (B1 − A1) / Δt / base_angle_value Логарифмическая шкала: наклон = (ln(B1) − ln(A1)) / Δt / base_angle_value -Каждый включённый угол рисуется из точки A1, продлевается на заданное число баров и подписывается. -Цвет линий определяется автоматически по направлению (зелёный — вверх, красный — вниз) или задаётся вручную. Быстрый старт 1)Добавьте индикатор на график. 2)В настройках: A1 Time/Price — начальная точка. B1 Time/Price — вторая точка (задаёт наклон). Base Angle — выберите 8/1, 1/1 или 1/8. Extend Fan (Bars) — длина продления линий в барах. Logarithmic Fan Calculation — переключатель логарифмического режима. Включите нужные блоки углов: Main, Fibonacci, Custom. 3)При желании активируйте Use Custom Fan Color и задайте цвет веера. Настройки Enable Fan — общий выключатель. A1 Time/A1 Price, B1 Time/B1 Price — опорные точки. Base Angle — 8/1, 1/1, 1/8. Extend Fan (Bars) — продление линий. Use Custom Fan Color / Fan Color — цвет вручную. Main Angles — 1/8, 1/4, 1/3, 1/2, 1/1, 2/1, 3/1, 4/1, 6/1, 8/1. Fibonacci Angles — 0.214, 0.35, 0.382, 0.618, 0.786, 0.886, 0.9335, 1.118, 1.236, 1.382, 1.618. Custom Angles — до 10 значений (точечные линии) с подписями. Советы по применению Выбор A1 и B1: A1 — значимый экстремум начала движения. B1 — следующий важный экстремум для задания наклона. Логарифмическая шкала: Подходит для долгосрочных экспоненциальных трендов (крипто, акции роста). Цена должна быть > 0. Следите, как цена реагирует на разные углы: 1/1 — медианный тренд. Дробные углы — потенциальная поддержка/сопротивление. Кратные — ускорение/замедление движения. Дисклеймер Это инструмент технического анализа и не является инвестиционной рекомендацией. Торговые решения вы принимаете на свой страх и риск.
Indicador Pine Script®
por Goldman_Gleb
Equilibrium TrackerWhat does this indicator do? This is a screener that checks if the current HTF High moves above the previous HTF High. This also applies for the low moving below the previous low. If the 50% of the previous candle is touched, this wil also show in the table and send alerts. Features Select up to 2 timeframes and 10 instruments. A screener table will show all instruments and will light up if an event occurs Alerts can also get fired Usage: Select a chart for example 1 minute Configure the indicator Create a new alert on the indicator using the lower timeframe chart
Indicador Pine Script®
por ArdOfCrypto
Mutanabby_AI | Fresh Algo V24Mutanabby_AI | Fresh Algo V24: Advanced Multi-Mode Trading System Overview The Mutanabby_AI Fresh Algo V24 represents a sophisticated evolution of multi-component trading systems that adapts to various market conditions through advanced operational configurations and enhanced analytical capabilities. This comprehensive indicator provides traders with multiple signal generation approaches, specialized assistant functions, and dynamic risk management tools designed for professional market analysis across diverse trading environments. Primary Signal Generation Framework The Fresh Algo V24 operates through two fundamental signal generation approaches that accommodate different market perspectives and trading philosophies. The Trending Signals Mode serves as the primary trend-following mechanism, combining Wave Trend Oscillator analysis with Supertrend directional signals and Squeeze Momentum breakout detection. This mode incorporates ADX filtering that requires values exceeding 20 to ensure sufficient trend strength exists before signal activation, making it particularly effective during sustained directional market movements where momentum persistence creates profitable trading opportunities. The Contrarian Signals Mode provides an alternative approach targeting reversal opportunities through extreme market condition identification. This mode activates when the Wave Trend Oscillator reaches critical threshold levels, specifically when readings surpass 65 indicating potential bearish reversal conditions or drop below 35 suggesting bullish reversal opportunities. This methodology proves valuable during overextended market phases where mean reversion becomes statistically probable. Advanced Filtering Mechanisms The system incorporates multiple sophisticated filtering mechanisms designed to enhance signal quality and reduce false positive occurrences. The High Volume Filter requires volume expansion confirmation before signal activation, utilizing exponential moving average calculations to ensure institutional participation accompanies price movements. This filter substantially improves signal reliability by eliminating low-conviction breakouts that lack adequate volume support from professional market participants. The Strong Filter provides additional trend confirmation through 200-period exponential moving average analysis. Long position signals require price action above this benchmark level, while short position signals necessitate price action below it. This ensures strategic alignment with longer-term trend direction and reduces the probability of trading against major market movements that could invalidate shorter-term signals. Cloud Filter Configuration System The Fresh Algo V24 offers four distinct cloud filter configurations, each optimized for specific trading timeframes and market approaches. The Smooth Cloud Filter utilizes the mathematical relationship between 150-period and 250-period exponential moving averages, providing stable trend identification suitable for position trading strategies. This configuration generates signals exclusively when price action aligns with cloud direction, creating a more deliberate but highly reliable signal generation process. The Swing Cloud Filter employs modified Supertrend calculations with parameters specifically optimized for swing trading timeframes. This filter achieves optimal balance between responsiveness and stability, adapting effectively to medium-term price movements while filtering excessive market noise that typically affects shorter-term analytical systems. For active intraday traders, the Scalping Cloud Filter utilizes accelerated Supertrend calculations designed to capture rapid trend changes effectively. This configuration provides enhanced signal generation frequency suitable for compressed timeframe strategies. The advanced Scalping+ Cloud Filter incorporates Hull Moving Average confirmation, delivering maximum responsiveness for ultra-short-term trading while maintaining signal quality through additional momentum validation processes. Specialized Assistant Functionality The system includes two distinct assistant modes that provide supplementary market analysis capabilities. The Trend Assistant Mode activates advanced cloud analysis overlays that display dynamic support and resistance zones calculated through adaptive volatility algorithms. These levels automatically adjust to current market conditions, providing visual guidance for identifying trend continuation patterns and potential reversal areas with mathematical precision. The Trend Tracker Mode concentrates on long-term trend identification by displaying major exponential moving averages with color-coded fill areas that clarify directional bias. This mode maintains visual simplicity while providing comprehensive trend context evaluation, enabling traders to quickly assess broader market direction and align shorter-term strategies accordingly. Dynamic Risk Management System The integrated risk management system automatically adapts across all operational modes, calculating stop loss and take profit targets using Average True Range multiples that adjust to current market volatility. This approach ensures consistent risk parameters regardless of selected operational mode while maintaining relevance to prevailing market conditions. Stop loss placement occurs at dynamically calculated distances from entry points, while three progressive take profit targets establish at customizable ATR multiples respectively. The system automatically updates these levels upon trend direction changes, ensuring current market volatility influences all risk calculations and maintains appropriate risk-reward ratios throughout trade management. Comprehensive Market Analysis Dashboard The sophisticated dashboard provides real-time market analysis including volatility measurements, institutional activity assessment, and multi-timeframe trend evaluation across five-minute through four-hour periods. This comprehensive market context assists traders in selecting appropriate operational modes based on current market characteristics rather than relying exclusively on historical performance data. The multi-timeframe analysis ensures mode selection considers broader market context beyond the primary trading timeframe, improving overall strategic alignment and reducing conflicts between different temporal market perspectives. The dashboard displays market state classification, volatility percentages, institutional activity levels, current trading session information, and trend pressure indicators with professional formatting and clear visual hierarchy. Enhanced Trading Assistants The Fresh Algo V24 includes specialized trading assistant features that complement the primary signal generation system. The Reversal Dot functionality identifies potential reversal points through Wave Trend Oscillator analysis, displaying visual indicators when crossover conditions occur at extreme levels. These reversal indicators provide early warning signals for potential trend changes before they appear in the primary signal system. The Dynamic Take Profit Labels feature automatically identifies optimal profit-taking opportunities through RSI threshold analysis, marking potential exit points at multiple levels for long positions and corresponding levels for short positions. This automated profit management system helps traders optimize exit timing without requiring constant manual monitoring of technical indicators. Advanced Alert System The comprehensive alert system accommodates all operational modes while providing granular notification control for various signal types and risk management events. Traders can configure separate alerts for normal buy signals, strong buy signals, normal sell signals, strong sell signals, stop loss triggers, and individual take profit target achievements. Cloud crossover alerts notify traders when trend direction changes occur, providing early indication of potential strategy adjustments. The alert system includes detailed trade setup information, timeframe data, and relevant entry and exit levels, ensuring traders receive complete context for informed decision-making without requiring constant chart monitoring. Technical Foundation Architecture The Fresh Algo V24 combines multiple proven technical analysis components including Wave Trend Oscillator for momentum assessment, Supertrend for directional bias determination, Squeeze Momentum for volatility analysis, and various exponential moving averages for trend confirmation. Each component contributes specific market insights while the unified system provides comprehensive market evaluation through their mathematical integration. The multi-component approach reduces dependency on individual indicator limitations while leveraging the analytical strengths of each technical tool. This creates a robust analytical framework capable of adapting to diverse market conditions through appropriate mode selection and parameter optimization, ensuring consistent performance across varying market environments. Market State Classification The indicator incorporates advanced market state classification through ADX analysis, distinguishing between trending, ranging, and transitional market conditions. This classification system automatically adjusts signal sensitivity and filtering parameters based on current market characteristics, optimizing performance for prevailing conditions rather than applying static analytical approaches. The volatility measurement system calculates current market activity levels as percentages, providing quantitative assessment of market energy and helping traders select appropriate operational modes. Institutional activity detection through volume analysis ensures signal generation aligns with professional market participation patterns. Implementation Strategy Considerations Successful implementation requires careful matching of operational modes to prevailing market conditions and individual trading objectives. Trending modes demonstrate optimal performance during directional markets with sustained momentum characteristics, while contrarian modes excel during range-bound or overextended market conditions where reversal probability increases. The cloud filter configurations provide varying degrees of confirmation strength, with smoother settings reducing false signal occurrence at the expense of some responsiveness to price changes. Traders must balance signal quality against signal frequency based on their risk tolerance and available trading time, utilizing the comprehensive customization options to optimize performance for their specific requirements. Multi-Timeframe Integration The system provides seamless multi-timeframe analysis through the integrated dashboard, displaying trend alignment across multiple time horizons from five-minute through four-hour periods. This analysis helps traders understand broader market context and avoid conflicts between different temporal perspectives that could compromise trade outcomes. Session analysis identifies current trading session characteristics, providing context for expected market behavior patterns and helping traders adjust their approach based on typical session volatility and participation levels. This geographic market awareness enhances strategic decision-making and improves timing for trade execution. Advanced Visualization Features The indicator includes sophisticated visualization capabilities through gradient candle coloring based on MACD analysis, providing immediate visual feedback on momentum strength and direction. This enhancement allows rapid market assessment without requiring detailed indicator analysis, improving efficiency for traders managing multiple instruments simultaneously. The cloud visualization system uses color-coded fill areas to clearly indicate trend direction and strength, with automatic adaptation to selected operational modes. This visual clarity reduces analytical complexity while maintaining comprehensive market information display through professional chart presentation. Performance Optimization Framework The Fresh Algo V24 incorporates performance optimization features including signal strength classification, automatic parameter adjustment based on market conditions, and dynamic filtering that adapts to current volatility levels. These optimizations ensure consistent performance across varying market environments while maintaining signal quality standards. The system automatically adjusts sensitivity levels based on selected operational modes, ensuring appropriate responsiveness for different trading approaches. This adaptive framework reduces the need for manual parameter adjustments while maintaining optimal performance characteristics for each operational configuration. Conclusion The Mutanabby_AI Fresh Algo V24 represents a comprehensive solution for professional trading analysis, combining multiple analytical approaches with advanced visualization and risk management capabilities. The system's strength lies in its adaptive multi-mode design and sophisticated filtering mechanisms, providing traders with versatile tools for various market conditions and trading styles. Success with this system requires understanding the relationship between different operational modes and their optimal application scenarios. The comprehensive dashboard and alert system provide essential market context and trade management support, enabling systematic approach to market analysis while maintaining flexibility for individual trading preferences. The indicator's sophisticated architecture and extensive customization options make it suitable for traders at all experience levels, from those seeking systematic signal generation to advanced practitioners requiring comprehensive market analysis tools. The multi-timeframe integration and adaptive filtering ensure consistent performance across diverse market conditions while providing clear guidelines for strategic implementation.
Indicador Pine Script®
por Mutanabby_AI
5
LANZ Strategy 7.0🔷 LANZ Strategy 7.0 — Multi-Session Breakout Logic with Midnight-Cross Support, Dynamic SL/TP, Multi-Account Lot Sizing & Real-Time Visual Tracking LANZ Strategy 7.0 is a robust, visually-driven trading indicator designed to capture high-probability breakouts from a customizable market session. It includes full support for sessions that cross midnight, dynamic calculation of Entry Price (EP), Stop Loss (SL) and Take Profit (TP) levels, and a multi-account lot sizing panel for precise risk management. The system is built to only trigger one trade per day and manages the full trade lifecycle with automated visual cleanup and detailed alerts. 📌 This is an indicator, not a strategy — it does not place trades automatically, but provides exact entry setups, SL/TP levels, risk-based lot size guidance, and real-time alerts for execution. 🧠 Core Logic & Features 🚀 Entry Signal (BUY/SELL) The trading day begins with a Decision Session (yellow box) where the high/low range is recorded. Once the Operative Session starts (blue zone), the first touch of the session’s high triggers a BUY setup, and the first touch of the session’s low triggers a SELL setup. Only one valid trade can be triggered per day — the system locks after the first signal. ⚙️ Dynamic Stop Loss & Take Profit SL levels are derived from the Decision Session high/low using customizable Fibonacci multipliers (independent for BUY and SELL). TP is dynamically calculated from the EP–SL distance using a user-defined Risk:Reward ratio (R:R). All EP, SL, and TP levels are drawn as independent lines with customizable colors, label text size, and style. ⏳ Session & Midnight-Cross Support Works with any custom Decision/Operative session hours, including sessions that start one day and end the next. Properly tracks time zones using New York session time for consistency. Includes Cutoff Time: after this limit, no new entries are allowed, and all visuals are auto-cleared if no trade was triggered. 💰 Multi-Account Risk-Based Lot Sizing Supports up to 5 independent accounts. Each account can have: Own capital Own risk percentage per trade Lot size is auto-calculated based on: SL distance (in pips or points) Pip value (auto-detected for Forex or manually set for indices/commodities) Results are displayed in a clean lot size info panel. 🖼️ Real-Time Visual Tracking Dynamic updates to all levels during the Decision Session. EP, SL, TP lines update if the session high/low changes before the Operative Session starts. Trade result labels: SL hit → “–1.00%” in red TP hit → “+X.XX%” in green Manual close at Operative End → shows actual % result in blue or purple. 🔔 Alerts for Every Key Event Session start notification EP entry triggered SL or TP hit Manual close at session end Missed entry due to cutoff 🧭 Execution Flow Decision Session (Yellow) — Capture high/low range. Operative Session (Blue) — First touch of high = BUY setup; first touch of low = SELL setup. Plot EP, SL, TP lines + calculate lot sizes for all active accounts. Track trade until SL, TP, or Operative End. If no entry triggered by Cutoff Time → clean all visuals and notify. 💡 Ideal For: Traders who operate breakout logic on specific sessions (NY, London, Asian, or custom). Those managing multiple accounts with strict risk per trade. Anyone trading assets with sessions crossing midnight. 👨‍💻 Credits: Developer: LANZ Logic Design: LANZ Built For: Multi-timeframe session breakouts with high precision. Purpose: One-shot trade per day, risk consistency, and total visual clarity.
Indicador Pine Script®
por rau_u_lanz
💎 ENJOYBLUE ⏰ Open Price AlertThis Pine Script (version 6) is designed for TradingView to monitor the closing of a user-selected Timeframe (TF) — for example, M30, H1, H4, or D1 — and trigger an alert immediately when that TF’s candle closes. Along with the alert, it displays the current open prices from four higher-level timeframes: Open MN: Open price of the current monthly candle Open W1: Open price of the current weekly candle Open D1: Open price of the current daily candle Open H4: Open price of the current 4-hour candle The alert message is formatted into a single compact line to ensure it is fully visible on mobile devices! ~ENJOYBLUE 💎
Indicador Pine Script®
por Harpeach
1
RSI and MACD Table with Cross [BY UKT]This script displays a compact, real-time dashboard of RSI and MACD values across multiple timeframes, along with the MACD cross direction (↑ / ↓) to help traders quickly assess momentum and trend strength. ▶️ Key Features: RSI values for Weekly, Daily, 1H, 30M, 15M, 5M, and 3M MACD values and cross status for each timeframe Color-coded values for visual clarity (Green = Bullish, Red = Bearish) Useful for both scalping and swing trading to get a multi-timeframe momentum overview 📌 Works on all asset classes: stocks, forex, crypto, and indices 👨‍💻 Developed in Pine Script v5
Indicador Pine Script®
por UKT_SCRIPTS
Liquidity Grab Entry Signals [Daily Enhanced]Liquidity Grab Entry Signals is a powerful tool designed to detect intraday reversal opportunities around daily high/low liquidity zones. Core features: – Plots current daily high/low levels – Identifies price interaction with these key zones – Confirms rejection via strong engulfing candles – Plots real-time long/short entry signals directly on chart – Includes alerts for both long and short setups This script is ideal for scalpers and intraday traders looking to exploit stop hunts, liquidity sweeps, and false breakouts. Optimized for instruments like US30, NAS100, Gold, BTC and more. Customize the sensitivity buffer to suit your asset and timeframe. Use this in combination with VWAP, FVG or Smart Money concepts for enhanced confirmation. --- Built for: 1s–15m charts Includes: Alerts + Custom Settings Type: Non-repainting Trade with clarity around the most manipulated price levels of the day.
Indicador Pine Script®
por ChartEdgePro
StratNinjaTableAuthor’s Instructions for StratNinjaTable Purpose: This indicator is designed to provide traders with a clear and dynamic table displaying The Strat candle patterns across multiple timeframes of your choice. Usage: Use the input panel to select which timeframes you want to monitor in the table. Choose the table position on the chart (top left, center, right, or bottom). The table will update each bar, showing the candle type, direction arrow, and remaining time until the candle closes for each selected timeframe. Hover over or inspect the table to understand current market structure per timeframe using The Strat methodology. Notes: The Strat pattern is displayed as "1", "2U", "2D", or "3" based on the relationship of current and previous candle highs and lows. The timer updates in real-time and adapts to daily, weekly, monthly, and extended timeframes. This script requires Pine Script version 6. Please use it on supported platforms. MFI or other indicators are not included in this base version but can be integrated separately if desired. Credits: Developed and inspired by shayy110 — thanks for your foundational work on The Strat in Pine Script. Disclaimer: This script is for educational and informational purposes only. Always verify signals and manage risk accordingly.
Indicador Pine Script®
por koriatmanagement
Mean Reversion & Momentum Hybrid | D_QUANT 📌 Mean Reversion & Momentum Hybrid | D_QUANT 📖 Description: This indicator combines mean reversion logic, volatility filtering, and percentile-based momentum to deliver clear, context-aware buy/sell signals designed for trend-following and contrarian setups. At its core, it merges: A Bollinger Band % Positioning Model (BB%) A 75th/25th Percentile Momentum System A Volatility-Adjusted Trend Filter using RMA + ATR All tied together with a dynamic gradient-style oscillator that visualizes signal strength and persistence over time — making it easy to track high-conviction setups. Signals only trigger when all three core components align, filtering out noise and emphasizing high-probability turning points or trend continuations. ⚙️ Methodology Overview: Bollinger Bands % (BB%): Price is measured as a percentage between upper and lower Bollinger Bands (based on OHLC4). Entries are only considered when price exceeds custom BB% thresholds — emphasizing market extremes. Volatility-Based Trend Filter (RMA + ATR): A smoothed RMA baseline is paired with ATR to define trend bias. This ensures signals only occur when price deviates meaningfully beyond recent volatility. Percentile Momentum Model (75th/25th Rank): Price is compared against its rolling 75th and 25th percentile. If price breaks these statistical boundaries (adjusted by ATR), it triggers a directional momentum condition. Signal Consensus Engine: All three layers must agree — BB% condition, trend filter, and percentile momentum — before a buy or sell signal is plotted. Gradient Oscillator Visualization: Signals appear as a fading oscillator line with a gradient-filled area beneath it. The color intensity represents how “fresh” or “strong” the signal is, fading over time if not reconfirmed, offering both clarity and signal aging at a glance. 🔧 User Inputs: 🧠 Core Settings: Source: Select the price input (default: close) Bollinger Bands Length: Period for BB basis and deviation Bollinger Bands Multiplier: Width of the bands Minimum BB Width (% of Price): Prevents signals during low-volatility chop 📊 BB% Thresholds: BB% Long Threshold (L): Minimum %B to consider a long BB% Short Threshold (S): Maximum %B to consider a short 🔍 Trend Filter Parameters: RMA Length: Period for the smoothed trend baseline ATR Length: Lookback for ATR in trend deviation filter ⚡️ Momentum Parameters: Momentum Length: Period for percentile momentum calculation Mult_75 / Mult_25: ATR-adjusted thresholds for breakout above/below percentile levels 🎨 Visualization: Bar Coloring: Highlights candles during active signals Background Coloring: Optional background shading for signals Show Oscillator Plot: Toggle the gradient-style oscillator 🧪 Use Case: This indicator works well across all assets for trend identification. It is particularly effective when used on higher timeframes (e.g. 12H, 1D,2D) to capture mean reversion bounces or confirm breakouts backed by percentile momentum and volatility expansion. ⚠️ Notes: This is not financial advice. Use in combination with proper risk management and confluence from other tools.
Indicador Pine Script®
por D_QUANT
MTF Dashboard 9 Timeframes + Signals# MTF Dashboard Pro - Multi-Timeframe Confluence Analysis System ## WHAT THIS SCRIPT DOES This script creates a comprehensive dashboard that simultaneously analyzes market conditions across 9 different timeframes (1m, 5m, 15m, 30m, 1H, 4H, Daily, Weekly, Monthly) using a proprietary confluence scoring methodology. Unlike simple multi-timeframe displays that show individual indicators separately, this script combines trend analysis, momentum, volatility signals, and volume analysis into unified confluence scores for each timeframe. ## WHY THIS COMBINATION IS ORIGINAL AND USEFUL **The Problem Solved:** Most traders manually check multiple timeframes and struggle to quickly assess overall market bias when different timeframes show conflicting signals. Existing MTF scripts typically display individual indicators without synthesizing them into actionable intelligence. **The Solution:** This script implements a mathematical confluence algorithm that: - Weights each indicator's signal strength (trend direction, RSI momentum, MACD volatility, volume analysis) - Calculates normalized scores across all active timeframes - Determines overall market bias with statistical confidence levels - Provides instant visual feedback through color-coded symbols and star ratings **Unique Features:** 1. **Confluence Scoring Algorithm**: Mathematically combines multiple indicator signals into a single confidence rating per timeframe 2. **Market Bias Engine**: Automatically calculates overall directional bias with percentage strength across all selected timeframes 3. **Dynamic Display System**: Real-time updates with customizable layouts, color schemes, and selective timeframe activation 4. **Statistical Analysis**: Provides bullish/bearish vote counts and overall confluence percentages ## HOW THE SCRIPT WORKS TECHNICALLY ### Core Calculation Methodology: **1. Trend Analysis (EMA-based):** - Fast EMA (default: 9) vs Slow EMA (default: 21) crossover analysis - Returns values: +1 (bullish), -1 (bearish), 0 (neutral) **2. Momentum Analysis (RSI-based):** - RSI levels: >70 (strong bullish +2), >50 (bullish +1), <30 (strong bearish -2), <50 (bearish -1) - Provides overbought/oversold context for trend confirmation **3. Volatility Analysis (MACD-based):** - MACD line vs Signal line positioning - Histogram strength comparison with previous bar - Combined score considering both direction and momentum strength **4. Volume Analysis:** - Current volume vs 20-period moving average - Thresholds: >150% MA (strong +2), >100% MA (bullish +1), <50% MA (weak -2) **5. Confluence Calculation:** ``` Confluence Score = (Trend + RSI + MACD + Volume) / 4.0 ``` **6. Market Bias Determination:** - Counts bullish vs bearish signals across all active timeframes - Calculates bias strength percentage: |Bullish Count - Bearish Count| / Total Active TFs * 100 - Determines overall market direction: BULLISH, BEARISH, or NEUTRAL ### Multi-Timeframe Implementation: Uses `request.security()` calls to fetch data from each timeframe, ensuring all calculations are performed on the respective timeframe's data rather than current chart timeframe, providing accurate multi-timeframe analysis. ## HOW TO USE THIS SCRIPT ### Initial Setup: 1. **Timeframe Selection**: Enable/disable specific timeframes in "Timeframe Selection" group based on your trading style 2. **Indicator Configuration**: Adjust EMA periods (Fast: 9, Slow: 21), RSI length (14), and MACD settings (12/26/9) to match your analysis preferences 3. **Display Options**: Choose table position, text size, and color scheme for optimal visibility ### Reading the Dashboard: **Symbol Interpretation:** - ⬆⬆ = Strong bullish signal (score ≥ 2) - ⬆ = Bullish signal (score > 0) - ➡ = Neutral signal (score = 0) - ⬇ = Bearish signal (score < 0) - ⬇⬇ = Strong bearish signal (score ≤ -2) **Confluence Stars:** - ★★★★★ = Very high confidence (score > 0.75) - ★★★★☆ = High confidence (score > 0.5) - ★★★☆☆ = Medium confidence (score > 0.25) - ★★☆☆☆ = Low confidence (score > 0) - ★☆☆☆☆ = Very low confidence (score > -0.25) **Market Bias Section:** - Shows overall market direction across all active timeframes - Strength percentage indicates conviction level - Overall confluence score represents average agreement across timeframes ### Trading Applications: **Entry Signals:** - Look for high confluence (4-5 stars) across multiple timeframes in same direction - Higher timeframe alignment provides stronger signal validation - Use confluence percentage >75% for high-probability setups **Risk Management:** - Lower timeframe conflicts may indicate choppy conditions - Neutral bias suggests ranging market - adjust position sizing - Strong bias with high confluence supports larger position sizes **Timeframe Harmony:** - Short-term trades: Focus on 1m-1H alignment - Swing trades: Emphasize 1H-Daily alignment - Position trades: Prioritize Daily-Monthly confluence ## SCRIPT SETTINGS EXPLANATION ### Dashboard Settings: - **Table Position**: Choose optimal location (Top Right recommended for most layouts) - **Text Size**: Adjust based on screen resolution and preferences - **Color Scheme**: Professional (default), Classic, Vibrant, or Dark themes - **Background Color/Transparency**: Customize table appearance ### Timeframe Selection: All timeframes optional - activate based on trading timeframe preference: - **Lower Timeframes (1m-30m)**: Scalping and day trading - **Medium Timeframes (1H-4H)**: Swing trading - **Higher Timeframes (D-M)**: Position trading and long-term bias ### Indicator Parameters: - **Fast EMA (Default: 9)**: Shorter period for trend sensitivity - **Slow EMA (Default: 21)**: Longer period for trend confirmation - **RSI Length (Default: 14)**: Standard momentum calculation period - **MACD Settings (12/26/9)**: Standard MACD configuration for volatility analysis ### Alert Configuration: - **Strong Signals**: Alerts when confluence >75% with clear directional bias - **High Confluence**: Alerts when multiple timeframes strongly agree - All alerts use `alert.freq_once_per_bar` to prevent spam ## VISUAL FEATURES ### Chart Elements: - **Background Coloring**: Subtle background tint reflects overall market bias - **Signal Labels**: Strong buy/sell labels appear on chart during high-confluence signals - **Clean Presentation**: Dashboard overlays chart without interfering with price action ### Color Coding: - **Green/Bullish**: Various green shades for positive signals - **Red/Bearish**: Various red shades for negative signals - **Gray/Neutral**: Neutral color for conflicting or weak signals - **Transparency**: Configurable transparency maintains chart readability ## IMPORTANT USAGE NOTES **Realistic Expectations:** - This tool provides analysis framework, not trading signals - Always combine with proper risk management - Past performance does not guarantee future results - Market conditions can change rapidly - use appropriate position sizing **Best Practices:** - Verify signals with additional analysis methods - Consider fundamental factors affecting the instrument - Use appropriate timeframes for your trading style - Regular parameter optimization may be beneficial for different market conditions **Limitations:** - Effectiveness may vary across different instruments and market conditions - Confluence scoring is mathematical model - not predictive guarantee - Requires understanding of underlying indicators for optimal use This script serves as a comprehensive analysis tool for traders who need quick, organized access to multi-timeframe market information with statistical confidence levels.
Indicador Pine Script®
por DeltaSpeedEdge
HTFSweep – Structure & ResolveThis indicator isolates higher timeframe Open, High, Low, and Close levels and projects them onto lower timeframes. It is designed as a structural lens, not a trading signal — a tool for experienced operators who study how intraday price interacts with higher‑timeframe liquidity anchors. Key Features: Selectable higher timeframe (default: Daily). Plots Open, High, Low, Close lines across intraday charts. Bullish/Bearish candle bodies shaded for context. Background fill between High and Low for zone visualization. Purpose: This script is not a “buy/sell” tool. It is a scope, intentionally minimal, highlighting a repeating place of structural and liquidity significance. Use it to track sweeps of higher‑timeframe levels and confirm structural shifts intraday. ⚠️ Disclaimer: This script provides market structure visualization only. It does not generate trading signals or financial advice. COMEX_MINI:MGC1!
Indicador Pine Script®
por michaelpharrold
Monthly Open Lines (Historical, Accurate)📝 Description: This indicator plots horizontal lines at every monthly open across the entire chart, helping traders easily identify key support/resistance levels based on the start of each month. ✅ Accurately tracks all historical monthly opens ✅ Lines extend fully across the screen (like regular horizontal lines) ✅ Black lines for clean, minimal visual impact ✅ Works on any timeframe (intraday, daily, etc.) 📊 Ideal For: Price action traders Support/resistance mapping Monthly level breakout strategies Institutional order flow tracking
Indicador Pine Script®
por Dynamike182
Multi-Timeframe SFP + SMTImportant: Please Read First This indicator is not a "one size fits all" solution. It is a professional and complex tool that requires you to learn how to use it, in addition to backtesting different settings to discover what works best for your specific trading style and the assets you trade. The default settings provided are my personal preferences for trading higher-timeframe setups, but you are encouraged to experiment and find your own optimal configuration. Please note that while this initial version is solid, it may still contain small errors or bugs. I will be actively working on improving the indicator over time. Also, be aware that the script is not written for maximum efficiency and may be resource-intensive, but this should not pose a problem for most users. The source code for this indicator is open. If you truly want to understand precisely how all the logic works, you can copy and paste the code into an AI assistant like Gemini or ChatGPT and ask it to explain any part of the script to you. Author's Preferred Settings (Guideline) As a starting point, here are the settings I personally use for my trading: SFP Timeframe: 4-Hour (Strength: 5-5) Max Lookback: 35 Bars Raid Expiration: 1 Bar SFP Lines Limit: 1 SMT Timeframe 1: 30-Minute (Strength: 2-2) with 3-Minute LTF Detection. SMT Timeframe 2: 15-Minute (Strength: 3-3) with 3-Minute LTF Detection. SMT Timeframe 3: 1-Hour (Strength: 1-1) with 3-Minute LTF Detection. SMT Timeframe 4: 15-Minute (Strength: 1-1) with 3-Minute LTF Detection. Multi-Timeframe SMT: An Overview This indicator is a powerful tool designed to identify high-probability trading setups by combining two key institutional concepts: Swing Failure Patterns (SFP) on a higher timeframe and Smart Money Technique (SMT) divergences on a lower timeframe. A key feature is the ability to configure and run up to four independent SMT analyses simultaneously, allowing you to monitor for divergences across multiple timeframes (e.g., 15m, 1H, 4H) from a single indicator. Its primary purpose is to generate automated signals through TradingView's alert system. By setting up alerts, the script runs server-side, monitoring the market for you. When a setup presents itself, it will send a push notification to your device, allowing you to personally evaluate the trade without being tied to your screen. The Strategy: HTF Liquidity Sweeps into LTF SMT The core strategy is built on a classic institutional trading model: Wait for a liquidity sweep on a significant high timeframe (e.g., 4-hour, Daily). Once liquidity is taken, look for a confirmation of a shift in market structure on a lower timeframe. This indicator uses an SMT divergence as that confirmation signal, indicating that smart money may be stepping in to reverse the price. How It Works: The Two-Step Process The indicator's logic follows a precise two-step process to generate a signal: Step 1: The Swing Failure Pattern (SFP) First, the indicator identifies a high-timeframe liquidity sweep. This is configured in the "Swing Failure Pattern (SFP) Timeframe" settings. It looks for a candle that wicks above a previous high (or below a previous low) but then closes back within the range of that pivot. This action is known as a "raid" or a "swing failure," suggesting the move failed to find genuine momentum. Step 2: The SMT Divergence The moment a valid SFP is confirmed, the indicator's multiple SMT engines activate. Each engine begins monitoring the specific SMT timeframe you have configured (e.g., "SMT Timeframe 1," "SMT Timeframe 2," etc.) for a Smart Money Technique (SMT) divergence. An SMT divergence occurs when two closely correlated assets fail to move in sync. For example, after a raid on a high, Asset A makes a new high, but Asset B fails to do so. This disagreement suggests weakness and a potential reversal. When the script finds this divergence, it plots the SMT line and triggers an alert. The Power of Alerts The true strength of this indicator lies in its alert capabilities. You can create alerts for both unconfirmed and confirmed SMTs. Enable Alerts LTF Detection: These alerts trigger when an unconfirmed, potential SMT is spotted on the lower "LTF Detection" timeframe. While not yet confirmed, these early alerts can notify you of a potential move before it fully happens, allowing you to be ahead of the curve and find the best possible trade entries. Enable Alerts Confirmed SMT: These alerts trigger only when a permanent, confirmed SMT line is plotted on your chosen SMT timeframe. These signals are more reliable but occur later than the early detection alerts. Key Concepts Explained What is Pivot Strength? Pivot Strength determines how significant a high or low needs to be to qualify as a valid structural point. A setting of 5-5, for example, means that for a candle's high to be considered a valid pivot high, its high must be higher than the highs of the 5 candles to its left and the 5 candles to its right. Higher Strength (e.g., 5-5, 8-8): Creates fewer, but more significant, pivots. This is ideal for identifying major structural highs and lows on higher timeframes. Lower Strength (e.g., 2-2, 3-3): Creates more pivots, making it suitable for identifying the smaller shifts in momentum on lower timeframes. Raid Expiration & Validity An SFP signal is not valid forever. The "Raid Expiration" setting determines how many SFP timeframe bars can pass after a raid before that signal is considered "stale" and can no longer be used to validate an SMT. This ensures your SMT divergences are always in response to recent liquidity sweeps. Why You Must Be on the Right Chart Timeframe to See SMT Lines Pine Script™ has a fundamental rule: an indicator running on a chart can only "see" the bars of that chart's timeframe or higher. When the SMT logic is set to the 15-minute timeframe, it calculates its pivots based on 15-minute data. To accurately plot lines connecting these pivots, you must be on a 15-minute chart or lower (e.g., 5-minute, 1-minute). If you are on a higher timeframe chart, like the 1-hour, the 15-minute bars do not exist on that chart, so the indicator has no bars to draw the lines on. This is precisely why the alert system is so powerful. You can set your alert to run on the 15-minute timeframe, and TradingView's servers will monitor that timeframe for you, sending a notification regardless of what chart you are currently viewing.
Indicador Pine Script®
por nickbonenkamp
2