Strong NQ ORB Breakouts | ProjectSyndicateSTRONG NQ ORB Breakouts catches the moment the Nasdaq session resolves its opening range — and instead of treating every push past a line as a trade, it waits for a genuine close beyond the range, tags the direction, and ranks the breakout 0–10 with a star score. The first block of the session builds a range; price then has to actually close outside it, in agreement with momentum and — if you want it — the higher-timeframe trend, before a signal arms. Every setup gets a structural stop, fixed R-based targets with a ⅓/⅓/⅓ scale-out and break-even after the first bank, and is tracked live on a full statistics dashboard — including end-of-session time-stops — so you can see exactly how the logic behaves on the instrument and timeframe you trade.
🧠 Opening-Range Core — the core idea. At the start of the session the engine records the high and low of a configurable opening window, 60 minutes by default. That band is the opening range: the session's first agreed value area. A signal fires on the release — the bar that closes beyond the range high for a long or the range low for a short inside the trade window — and the direction is set by that break. In Auto mode the range anchors to the instrument's own daily session open (the first bar of the day), so it locks to the real NAS100 / NQ open regardless of your feed's server clock; a Custom session-plus-timezone mode is there if you'd rather define the window by hand. Signals are evaluated on the bar's close and are fixed once that bar closes — the range and the break do not repaint.
📈 Range Mapping & ADR Context — while the opening window is live, the engine continuously tracks the developing high, low, and width of the range, then freezes it the moment the window ends. The finished range is measured in points and expressed as a percentage of the instrument's Average Daily Range, a non-repainting daily read, so you instantly see whether the session is coiling tightly or has already burned its move. A clean, proportionate range is a loaded session; an over-wide one is a day that has already spent itself.
🎯 Structural Stop + R-Based Scale-Out — risk (R) is measured from an ATR distance by default — the strongest basis on NAS100 M5 — or against the opposite range edge or the range midline if you prefer, then floored and capped by ATR so it can never collapse into a meaningless stop or balloon into a wide one. TP1, TP2, and TP3 are set at clean R multiples and default to a balanced 1R / 2R / 3R, fully adjustable. The trade model is an honest ⅓ scale-out: one third banks at each target, and after TP1 the remaining two thirds ride with the stop moved to break-even. Every signal plots its complete Entry / SL / TP1 / TP2 / TP3 line set, labeled levels, and filled TP / SL zone boxes, with an R-tagged result label on exit.
🎚️ Conviction Controls — a small set of dials sets how serious a breakout must be before it counts: the 0–10 Minimum Strength gate, an optional Range-vs-ADR window that skips days whose range is too tight or too wide, a Close-vs-Wick breakout trigger, and Max One Trade Per Day. By design the day-skipping filters are off by default — no days are hidden — so you first see the raw, unfiltered behavior. Tighten them for fewer, higher-quality fires; loosen them for more activity. This is your main dial for conviction versus frequency.
🧭 HTF Trend Alignment + Session Gating — an optional higher-timeframe EMA filter blocks counter-trend fires, keeping you on the dominant side: longs only above it, shorts only below. The higher-timeframe value is read without lookahead. Entries are confined to the trade window after the range forms, and the per-day cap spaces out tickets so one volatile session can't stack trades. Anything still open at the session close is flattened by an end-of-session time-stop — and that exit is booked and counted honestly, never quietly dropped.
🧲 Liquidity Magnet — the engine maps resting liquidity by tracking confirmed swing pivots above and below price and marking each as swept or unswept as price trades through it. When a breakout fires, it projects the nearest opposing unswept pool as a dotted magnet line — the pocket of liquidity the move is naturally drawn toward — and the dashboard reports the distance to the nearest pools up and down in ATR terms. It's context for where the breakout wants to go.
⭐ 0–10 Setup-Quality Score — every release is scored and labeled with 1–5 stars and a tier FORMING → WEAK → MODERATE → STRONG → VERY STRONG → ELITE across breakout-native factors: expansion-candle body strength, candle range vs ATR, momentum alignment over short and medium lookbacks, volume confirmation, clean penetration beyond the range edge, RSI agreement, higher-timeframe EMA alignment, and intraday bias of close versus the session open. A companion direction-probability read blends penetration, momentum, RSI, session bias, and HTF position into an up/down percentage. Treat the score as a confluence / cleanliness read for ranking setups — it describes how textbook a breakout is, not a guaranteed outcome. Note: on the test data, filtering to "strong only" actually *reduced* win rate, so the stars default to a context tool rather than a hard gate.
📊 Live Statistics Dashboard — a non-intrusive panel tracks, in real time on your chart: the current session state of waiting / forming OR / range set / armed / trade active, the live opening-range size and its ADR percentage, the magnet distance up and down, the active bias and trade, the live strength and direction-probability meters, total win rate and closed-trade count, profit factor, average R per trade, total R, best-performing direction, long vs short win rate, current and max win/loss streaks, and a TP1 / TP2 / TP3 / SL / EOD outcome breakdown. Every filled trade that reaches an outcome is counted — winners, stop-outs, break-even runners, and time-stops alike — so the numbers are computed live from the real signals on your current symbol and timeframe rather than a figure printed in a description.
🎨 Clean Themed Visuals — a Midnight institutional palette, with Emerald, Ice Blue, Gold Black, and Aqua Violet alternates, shades the opening-range box, the ORH / ORL / midline levels, the per-trade SL / TP ladder, the liquidity pools and magnet, and the dashboard to one coherent look, so quality and direction read at a glance. The range box is drawn over the window where it formed and projected forward with point-labeled edges; long and short trades are color-keyed; a faint tint marks the active opening window. A shelf-length and max-drawn-trades control keep the chart clean — the right-edge zones never stretch into oversized towers, tickets snap back to the exit bar on close so labels never float away, and only the most recent N tickets stay drawn while the statistics remain cumulative over the whole history.
🔔 Detailed Alerts — fires on long / short opening-range breakouts, plus TP3, protected partial-TP, and stop-loss events, formatted for manual or automated use.
🔧 Fully Customizable — every component is exposed: the range anchor (Auto session-open or Custom), the opening-range minutes, timezone, and trade window; the ATR length, stop basis of ATR / opposite edge / midline with risk cap and floor; the three R targets, break-even-after-TP1 toggle, Close-vs-Wick trigger, and one-trade-per-day cap; the ADR gate with min/max band, minimum strength, and HTF alignment filter and timeframe; the liquidity pivot length, pool display, and magnet toggle; the point definition for the dashboard; all five themes; and every label, dashboard, zone, and projection toggle.
🎯 Why this is different — most ORB tools just draw two lines at a fixed clock time and leave everything after that to you. This one anchors the range to the real Nasdaq open, sizes the break against the instrument's own ADR so a tight coil and a blown-out day aren't treated alike, can demand momentum, volume, penetration, and trend confirmation before it fires, anchors risk sensibly, then layers a genuine ⅓/⅓/⅓ scale-out with break-even, a liquidity magnet, an objective 0–10 ranking, and a live, honest statistics panel — one that counts stop-outs and end-of-session exits in full — so you are tuning and judging the system on real, current data instead of a marketing figure.
🚀 Where to use it — built and validated for NAS100 / NQ on the M5 timeframe, where the default OR 60m · ATR×1.0 stop · 1R/2R/3R model was developed. The ATR-based stop and ADR sizing adapt to volatility automatically, and the session windows can be re-pointed to a different open if you want to run the same engine elsewhere. It works on other index CFDs and futures, but the defaults are tuned for the Nasdaq open.
🎯 How to trade it
- Apply it to NAS100 / NQ on M5 and let the dashboard populate. Read the live win rate, profit factor, and average R for your symbol and timeframe before committing — if the logic doesn't suit your feed, you'll see it.
- Start with the day-skipping filters off to see raw behavior; add the HTF Trend Alignment and Range-vs-ADR gates when you want to trade only with the larger trend and skip dead or already-spent sessions.
- Wait for a NQ ORB LONG / NQ ORB SHORT label — it marks a confirmed close beyond the opening range, with the star score, direction probability, and Entry, SL, and TP1/2/3 already plotted.
- Manage the trade with the plotted levels: the structural SL defines your risk, one third banks at each R target with the stop moving to break-even after TP1, and any position still open at the trade-window close is flattened by the time-stop.
- Use Minimum Strength and Max One Trade Per Day to set your tempo, and read the liquidity magnet for a sense of where the move is being drawn.
⚠️ Important — this is a decision-support tool, not a standalone buy/sell system, and it makes no performance guarantees. Default settings were chosen on historical data and behavior will vary by instrument, timeframe, session, and configuration; the dashboard's statistics are historical and descriptive, not a forecast. The trade model includes a ⅓ scale-out, break-even after TP1, and an end-of-session time-stop, so some trades close at a fraction of a target rather than a full win or loss — these are counted in full, which is honest but means win rate alone is misleading; always weigh it together with average R and profit factor, and resize the R targets to your own risk profile. Signals confirm on the closed bar, so always wait for the labeled release on a closed candle. Always combine it with your own analysis and risk management, and test it on your market before trading it live. Indicador
Strong Biotech Screener | ProjectSyndicateStrong Biotech Screener turns dozens of charts into a single institutional-style dashboard, ranking a curated universe of 40 leading biotech names by performance across six timeframes and scoring each one on professional-grade risk metrics — Beta, Sharpe, Sortino, Omega, Z-Score, and Kelly — so you can find the year's biotech leaders and weigh their risk-adjusted quality at a glance, all on one clean, sortable panel. Every figure is computed live on the daily timeframe from real price history, not hard-coded, so the board reflects the market as it actually is right now.
🧬 Curated 40-Name Biotech Universe — the screener watches a hand-picked list of 40 high-momentum biotech, pharma, and life-sciences stocks in one place. Instead of flipping through forty charts, you see every name's performance and risk profile side by side and immediately spot who is leading and who is rolling over.
🗓️ Six-Timeframe Performance — each stock is tracked across Week, Month, Quarter, 6-Month, 12-Month, and Year-to-Date returns, so you can separate a one-week catalyst pop from a genuine long-run trend and see momentum building or fading across horizons in a single row.
🧮 Institutional Risk Metrics, Done Properly — beyond raw returns, every name is scored on Sharpe (excess return per unit of total volatility), Sortino (return per unit of downside risk only), Omega (probability-weighted gains versus losses above the risk-free threshold), Z-Score (how stretched the recent move is in standard deviations), and the Kelly fraction (a theoretical optimal-sizing read from return and variance). The stats are annualized from daily returns over a rolling window with a configurable risk-free rate, so the risk picture is consistent and comparable across the whole list — which matters especially in biotech, where single-name volatility is extreme.
🎯 Basket-Relative Beta — Beta is measured against an equal-weight basket of the 40 names in the screener, so it tells you how a stock moves relative to this specific biotech cohort rather than a broad index. Beta above 1 swings harder than the group; below 1 is steadier. You control the lookback length used for the beta and correlation calculation.
🌡️ Annualized Weekly Volatility — a dedicated Wk Vol column annualizes the standard deviation of recent weekly returns, giving you a fast read on how violent each name's price action is before you size into it — essential in a sector where binary trial and FDA events can move a stock 50% in a session.
🔀 Dynamic Sorting — sort the entire board by any of the six performance columns with a single setting. Rank by YTD to find the year's biotech leaders, by Week to catch what is moving on fresh catalysts, or by any horizon in between — the table re-ranks instantly.
🎨 Bloomberg-Amber Theme with Color-Coded Strength — a clean amber-on-black dashboard with a multi-level gradient that runs from bright amber on the strongest gains through to deep red on the steepest losses, so strength and weakness jump out the moment you look at the panel.
🧩 Fully Customizable Dashboard — place the table anywhere on the chart (Top / Middle / Bottom paired with Left / Center / Right), choose your text size (Tiny / Small / Normal / Large), set the sort column, the beta length, and the risk-free rate and periods — all from the settings menu, no code editing required.
🔒 Daily-Timeframe Lock — the screener is built for daily data and will prompt you to switch if you load it on a lower timeframe, so the returns, volatility, and ratios are always calculated on the basis they are designed for.
⚡ Lightweight and Efficient — the whole 40-name board is built from a tight, well-organized script that runs smoothly on TradingView, with a clean merged title heading and an alternating-row layout for easy reading. Delisted or halted tickers degrade gracefully to blank rows rather than breaking the panel.
🎯 Why this is different — most watchlists show you price and maybe a percentage move. This screener puts performance and a full institutional risk stack — Sharpe, Sortino, Omega, Z-Score, Kelly, Beta, and annualized volatility — for forty leading biotech names on one sortable, color-coded panel, so you are ranking opportunities by risk-adjusted quality, not just chasing the biggest green number.
🚀 Where to use it — apply it to any daily chart to monitor the biotech leadership group as a whole. Use it for top-down scanning, rotation ideas, and risk screening before you drill into an individual name's chart for entry timing.
⚠️ Important — this is a research and decision-support dashboard, not a buy/sell system, and it makes no performance guarantees. The 40-name universe is a snapshot of the year's momentum leaders and will drift over time; the board re-ranks live, but membership is fixed until updated. All figures are historical and descriptive, computed from past price data, and say nothing certain about the future. Risk metrics like Sharpe, Sortino, Omega, Z-Score, and Kelly are simplified, assumption-based estimates and should inform your judgment, not replace it. Biotech is an especially high-risk sector driven by binary clinical and regulatory events — always pair the screener with your own analysis and risk management. Indicador
DTC AIO [US] DTC AIO is an all-in-one dashboard for US equities that consolidates earnings, relative strength, volatility, and technical structure into a single overlay — built to speed up the "story of the stock" scan without stacking a dozen separate indicators on the chart.
Earnings Table
Displays quarterly or annual EPS/PAT and Sales with YoY% and QoQ% change, in a MarketSmith-style 5-column layout. Includes optional gross margin and ROE rows, an "avoid N/A" mode, and IBD-style # flagging for YoY comparisons off a negative prior-year base.
Relative Strength
IBD-style RS Line plotted against a configurable benchmark (defaults to SPY), with an RS Rating label (percentile rank vs. benchmark over 1 year)
"Panic RS" markers flag days where the stock is holding above its EMA while the benchmark/panic index is below its own EMA — a quick outperformance-under-stress signal
Moving Averages
Four fully configurable MAs (SMA/EMA/WMA), independent length/color/width per line.
Volatility & Volume
Average Daily Range % (ADR)
Relative volume vs. its historical average
"Burst score" — counts how many days over a configurable lookback (3M/6M/1Y/3Y) closed up 5%, 10%, or 17%+, a proxy for volatility regime / momentum bursts
Patterns & Price Action
Inside bar highlighting
Pocket pivot detection (volume-confirmed up days)
Lowest-volume-day marker over a configurable lookback
Anchored VWAP from the all-time high
High/Low pivot point labels with optional % change
Dashboard
A compact stats panel covering market cap, float, float %, average dollar volume, 52-week high/low distance, up/down volume ratio, and more — positioned in any corner.
Peer Comparison
Auto-detects the stock's industry (or sector, as fallback) from a built-in US industry map and displays a sortable peer table (1M%, 3M%, RS, RVol) with the current symbol pinned at top — no manual watchlist required.
Other
Weekly tight closes, a watermark with ticker/timeframe/day-change%, and full control over table position, size, and corner placement throughout.
All tables and colors auto-adapt to your chart's light/dark theme.
For educational and informational purposes only. Not financial advice. Indicador
DTC IntraPlus - intraday Momentum & Context Dashboard IndicatorAn all-in-one intraday companion built for spotting momentum days early and tracking context through the session — moving averages, VWAP, session structure, volume behavior, and a live info table, combined into one tool instead of stacking five separate indicators.
Core toolkit
4 configurable moving averages (10/20/50/200, choice of SMA/EMA/WMA/HMA) + VWAP
Volume-based candle coloring — flags candles with 150%+ and 200%+ relative volume vs. a configurable average, split by direction
Intraday session boxes (Morning / Mid-Day / Afternoon, IST-based, fully customizable time ranges and colors) so you can see at a glance which part of the session price action happened in
Daily divider labels to visually separate trading days on intraday timeframes
Momentum & context table
Gap % — today's opening gap vs. prior close
RVol — today's volume vs. its historical average
D ADR% — average daily range as a % of price, for a quick volatility read
Burst Ranker — counts how many big single-day moves (5%/10%/17%+) a stock has had over a lookback window, scored into a GREAT/GOOD/LOW rating (daily chart)
Strong Start — flags days that gapped up and held the gap (open > prior close, and the day's low never broke back below it by more than a configurable tolerance) — a stricter, more actionable signal than a raw gap-up alert
Sector / Industry lookup, session-in-progress readout
Mini Chart (Other Symbol)
A small candlestick chart of any symbol you choose, rendered off to the side of your main chart — keep an eye on a related stock, sector index, or the broader market without switching tabs. The other symbol's price is never plotted on your actual axis; it's rescaled into a normalized band anchored to your chart's own visible price range, so a completely different price scale never distorts your chart.
Design
Fully transparent, auto light/dark-adaptive info table with clean column alignment — built to sit on the chart without visual clutter. Indicador
Indicador
DAX Universe Relative Strength & Volume Quality [JS]DAX Universe RS & Volume Quality is a relative strength and pullback quality indicator designed for German stocks from the DAX, MDAX, SDAX and TecDAX universe.
The indicator measures a stock’s weighted relative performance against an equal-weighted German equity benchmark made from DAX, MDAX, SDAX and TecDAX. The relative strength model is inspired by IBD / Minervini-style momentum analysis, giving more weight to recent performance while still considering the medium- and longer-term trend.
Relative Strength Model:
• 40% weight: approx. 3-month performance
• 20% weight: approx. 6-month performance
• 20% weight: approx. 9-month performance
• 20% weight: approx. 12-month performance
The result is displayed as a percentage relative to the German stock universe benchmark:
• RS above 0% = the stock is outperforming the benchmark
• RS below 0% = the stock is underperforming the benchmark
• RS above the user-defined strength threshold = RS STARK / strong relative strength
In addition to relative strength, the indicator includes a High-Volume Down-Day filter. This helps assess whether a pullback is still constructive or whether distribution pressure may be increasing. The user can define:
• Lookback period
• Minimum loss required for a down-day to count
• Volume moving average length
• High-volume factor
• Maximum allowed High-Volume Down-Days
The simplified status box highlights the current setup condition using color:
• Green = strong relative strength and acceptable volume quality
• Yellow = positive or improving relative strength, but not yet ideal
• Red = weak relative strength or too many High-Volume Down-Days
The textbox position, size, width and height can be adjusted in the indicator settings.
This indicator is designed as a decision-support and screening tool for relative strength, pullback quality and German stock leadership analysis. It is not an official IBD RS Rating and does not provide financial advice or automatic buy/sell recommendations. Always combine it with your own chart analysis, risk management and market context. Indicador
Stocks: Dashboard [invincible3]Stocks Dashboard is a professional all-in-one stock analysis dashboard built directly for TradingView charts. It is designed to help investors, traders, and analysts quickly evaluate a stock using a combination of fundamental strength, valuation, financial health, income quality, shareholder return, and price momentum.
The indicator displays a clean table-based dashboard on the chart and converts raw financial and technical data into easy-to-read category scores. Instead of checking many separate financial ratios manually, this dashboard organizes the most important stock metrics into structured sections and gives a clear visual overview of the company’s current condition.
The dashboard includes composite scoring for Quality, Value, Growth, Financial Health, Income / Shareholder Return, and Momentum. Each category is scored from 0 to 100 and classified using simple rating labels such as Elite, Strong, Fair, Weak, or Risk. This allows users to quickly compare the strength and weakness of a stock across multiple dimensions.
The Valuation section includes important valuation metrics such as P/E TTM, Forward P/E, PEG Ratio, P/S, P/B, EV/EBITDA, EV/Sales, Earnings Yield, Operating Earnings Yield, Graham Price, Graham Number Upside, EPS TTM, and BVPS. These metrics help identify whether a stock may be expensive, fairly valued, or potentially undervalued.
The Quality section focuses on profitability and business efficiency. It includes ROE, Asset Return / ROA, ROIC, Piotroski F-Score, Gross Margin, Operating Margin, Net Margin, EBITDA Margin, and Free Cash Flow Margin. These values help evaluate how efficiently the company generates profits from its assets, equity, capital, revenue, and operations.
The Growth section tracks the company’s expansion profile using Revenue Growth, EPS Growth, and Sustainable Growth Rate. These metrics help users understand whether the business is improving, stagnating, or losing earnings momentum.
The Financial Health section evaluates balance sheet strength and risk. It includes Debt / Equity, Debt / Assets, Debt / EBITDA, Net Debt / EBITDA, Cash / Debt, Current Ratio, Quick Ratio, Interest Coverage, Altman Z-Score, Operating Cash Flow, and Free Cash Flow. This section is useful for identifying companies with strong liquidity, manageable debt, and lower financial risk.
The Income / Return section is designed for dividend and shareholder-return analysis. It includes Dividend Yield, Payout Ratio, Free Cash Flow Yield, DPS, Buyback Yield, and Buyback Ratio. These metrics help investors evaluate whether a company is returning value to shareholders through dividends, buybacks, and cash generation.
The Momentum section adds a technical view of the stock. It includes RSI 14, 1-month return, 3-month return, 6-month return, 12-month return, 6-month relative strength versus a selected benchmark, 12-month relative strength versus a selected benchmark, volatility, and moving-average trend using the 20, 50, and 200 daily moving averages.
The Snapshot section provides a quick summary of the selected stock, including current price, market capitalization, enterprise value, 52-week position, and distance from the 52-week high. This gives users a fast overview of where the stock is trading relative to its recent range.
Users can customize the stock symbol, benchmark/index symbol, financial period, table position, text size, color theme, and visible sections. The dashboard supports multiple professional themes, including Dark Terminal, Light Terminal, Emerald Pro, Royal Blue, and Amber Desk. Users can also enable or disable colored score backgrounds, score bars, alternating rows, colorful section headers, and directional symbols.
This indicator is useful for:
* Long-term stock analysis
* Fundamental screening
* Valuation comparison
* Dividend and shareholder-return review
* Financial health analysis
* Momentum confirmation
* Relative strength comparison against an index or benchmark
* Building a structured watchlist review process
The goal of this dashboard is to provide a fast, organized, and visually professional stock overview without requiring users to switch between multiple financial websites or separate indicators. It combines fundamental data and technical momentum into one compact chart-based table, making it easier to identify strong, weak, undervalued, overvalued, or financially risky stocks.
Note: The dashboard uses TradingView’s available financial data. Some metrics may appear unavailable depending on the selected symbol, exchange, market, or financial data coverage. This tool is intended for analysis and research purposes only and should not be considered financial advice.
Indicador
Auto Candlestick Patterns Targets Setup🔷 OVERVIEW
Auto Candlestick Pattern Targets automatically identifies supported candlestick reversal patterns and displays a complete trade setup directly on the chart. When a qualifying pattern is detected, the indicator plots an Entry level, Stop Loss, and up to three Take Profit levels based on its internal calculation logic.
The objective is to reduce the amount of manual chart work by presenting trade levels in a consistent visual format.
🔷 HOW IT WORKS
The indicator continuously evaluates completed candles for supported bullish and bearish candlestick formations.
When the pattern conditions are satisfied, it:
• Displays a Buy or Sell label
• Calculates an Entry level
• Places a Stop Loss based on the detected pattern
• Projects three Take Profit targets
Each setup remains visible on the chart, allowing users to review historical signals and monitor active trades.
🔷 VISUAL FEATURES
• Automatic Buy and Sell labels
• Entry level
• Stop Loss level
• Three Take Profit targets
• Risk and reward visualization
• Historical signal display
• Configurable colors and styles
🔷 INPUTS
The indicator includes options to customize:
• Signal sensitivity
• Display of Entry, Stop Loss, and Targets
• Label visibility
• Colors
• Historical setup display
🔷 USAGE
A common workflow is:
Wait for a Buy or Sell signal.
Allow the signal candle to close.
Review the plotted Entry, Stop Loss, and Take Profit levels.
Combine the setup with your own market analysis before making trading decisions.
🔷 MARKETS
The indicator can be applied to:
• Forex
• Stocks
• Cryptocurrency
• Indices
• Commodities
It is compatible with multiple timeframes, depending on the user's trading approach.
🔷 NOTES
This indicator is intended as a chart analysis tool and does not predict future price movements. Trade setups are generated according to the indicator's programmed rules and should be evaluated alongside other forms of technical analysis and appropriate risk management. Indicador
Strong Tech Stocks Screener | ProjectSyndicateStrong Tech Stocks Screener turns dozens of charts into a single institutional-style dashboard, ranking a curated universe of 40 leading tech, AI, and semiconductor names by performance across six timeframes and scoring each one on professional-grade risk metrics — Beta, Sharpe, Sortino, Omega, Z-Score, and Kelly — so you can find the leaders and weigh their risk-adjusted quality at a glance, all on one clean, sortable panel. Every figure is computed live on the daily timeframe from real price history, not hard-coded, so the board reflects the market as it actually is right now.
📊 Curated 40-Name Tech Universe — the screener watches a hand-picked list of 40 high-momentum tech, AI, and semiconductor stocks in one place. Instead of flipping through forty charts, you see every name's performance and risk profile side by side and immediately spot who is leading and who is rolling over.
🗓️ Six-Timeframe Performance — each stock is tracked across Week, Month, Quarter, 6-Month, 12-Month, and Year-to-Date returns, so you can separate a one-week pop from a genuine long-run trend and see momentum building or fading across horizons in a single row.
🧮 Institutional Risk Metrics, Done Properly — beyond raw returns, every name is scored on Sharpe (excess return per unit of total volatility), Sortino (return per unit of downside risk only), Omega (probability-weighted gains versus losses above the risk-free threshold), Z-Score (how stretched the recent move is in standard deviations), and the Kelly fraction (a theoretical optimal-sizing read from return and variance). The stats are annualized from daily returns over a rolling window with a configurable risk-free rate, so the risk picture is consistent and comparable across the whole list.
🎯 Basket-Relative Beta — Beta is measured against an equal-weight basket of the 40 names in the screener, so it tells you how a stock moves relative to this specific tech/AI cohort rather than a broad index. Beta above 1 swings harder than the group; below 1 is steadier. You control the lookback length used for the beta and correlation calculation.
🌡️ Annualized Weekly Volatility — a dedicated Wk Vol column annualizes the standard deviation of recent weekly returns, giving you a fast read on how violent each name's price action is before you size into it.
🔀 Dynamic Sorting — sort the entire board by any of the six performance columns with a single setting. Rank by YTD to find the year's leaders, by Week to catch what is moving now, or by any horizon in between — the table re-ranks instantly.
🎨 Bloomberg-Amber Theme with Color-Coded Strength — a clean amber-on-black dashboard with a multi-level gradient that runs from bright amber on the strongest gains through to deep red on the steepest losses, so strength and weakness jump out the moment you look at the panel.
🧩 Fully Customizable Dashboard — place the table anywhere on the chart (Top / Middle / Bottom paired with Left / Center / Right), choose your text size (Tiny / Small / Normal / Large), set the sort column, the beta length, and the risk-free rate and periods — all from the settings menu, no code editing required.
🔒 Daily-Timeframe Lock — the screener is built for daily data and will prompt you to switch if you load it on a lower timeframe, so the returns, volatility, and ratios are always calculated on the basis they are designed for.
⚡ Lightweight and Efficient — the whole 40-name board is built from a tight, well-organized script that runs smoothly on TradingView, with a clean merged title heading and an alternating-row layout for easy reading.
🎯 Why this is different — most watchlists show you price and maybe a percentage move. This screener puts performance and a full institutional risk stack — Sharpe, Sortino, Omega, Z-Score, Kelly, Beta, and annualized volatility — for forty leading tech names on one sortable, color-coded panel, so you are ranking opportunities by risk-adjusted quality, not just chasing the biggest green number.
🚀 Where to use it — apply it to any daily chart to monitor the tech/AI/semiconductor leadership group as a whole. Use it for top-down scanning, rotation ideas, and risk screening before you drill into an individual name's chart for entry timing.
⚠️ Important — this is a research and decision-support dashboard, not a buy/sell system, and it makes no performance guarantees. All figures are historical and descriptive, computed from past price data, and say nothing certain about the future. Risk metrics like Sharpe, Sortino, Omega, Z-Score, and Kelly are simplified, assumption-based estimates and should inform your judgment, not replace it. Always pair the screener with your own analysis and risk management. Indicador
Volume Flow MatrixVolume Flow Matrix is a relative volume histogram that helps identify how strong or weak current market participation is compared to recent volume activity.
The indicator measures current volume against a fixed 300-bar volume baseline. Instead of showing raw volume only, it converts volume into a relative reading. This makes it easier to see whether the current candle is trading below average volume, around normal activity, with increased participation, or at an unusually high volume level.
On historical candles, the calculation uses completed candle volume. On the live candle, the indicator uses realtime volume projection. This means the current candle’s volume is estimated based on how much time has passed in the candle. As a result, the histogram can react during the candle instead of only after the candle closes.
The histogram is divided into five volume conditions:
Dry Volume shows candles with weak participation. These bars appear when relative volume is below 0.75. Dry volume can be useful for spotting quiet market phases, low-interest candles, or areas where price is moving without strong volume support.
Default Volume represents normal volume conditions. These candles do not meet the requirements for dry, directional, or extreme volume. Default volume helps separate ordinary market activity from more important volume events.
Bull Volume appears when relative volume is elevated and the candle also shows bullish pressure. For a candle to qualify as Bull Volume, relative volume must be at least 1.55, the candle must close above its open, and the close must be positioned in the upper part of the candle range. This can help highlight candles where stronger participation supports upward pressure.
Bear Volume appears when relative volume is elevated and the candle shows bearish pressure. For a candle to qualify as Bear Volume, relative volume must be at least 1.55, the candle must close below its open, and the close must be positioned in the lower part of the candle range. This can help highlight candles where stronger participation supports downward pressure.
Extreme Volume marks unusually high relative volume at or above 2.30. These candles show that volume is significantly above the recent baseline. Extreme Volume does not automatically mean bullish or bearish continuation. It should be read together with price location, candle structure, support and resistance, liquidity zones, or the broader market context.
Each candle is assigned to only one volume condition. The script checks the conditions in a fixed order so the histogram remains clean and does not stack multiple volume types on the same bar.
How to use it:
Use Dry Volume to identify low-participation areas where price movement may be less reliable.
Use Bull Volume and Bear Volume to confirm whether directional candles are supported by stronger participation.
Use Extreme Volume to mark important high-activity candles that may appear near breakouts, liquidity grabs, absorption areas, reversals, or strong continuation moves.
Use Default Volume as the neutral background state between low-volume and high-volume conditions.
Volume Flow Matrix does not provide trade entries or exits by itself. It is designed to support analysis by making volume behavior easier to read. The strongest use case is combining it with price action, market structure, key levels, liquidity, trend context, or any existing trading plan.
Indicador
Exogenous Heatmap [invincible3]Exogenous Heatmap
The Exogenous Heatmap is a multi-country macro and market-performance dashboard designed to help traders and investors monitor external economic forces that may influence currencies, equities, commodities, and broader risk sentiment.
Instead of focusing only on price action from the current chart, this indicator visualizes key exogenous variables across major economies in a clean historical heatmap format. Users can compare countries by interest rates, GDP growth, balance of trade, foreign exchange reserves, and major stock index performance.
The indicator supports two calculation modes:
1. Raw Value
Displays the actual macroeconomic value or stock index performance for each country.
2. Differential vs Base
Compares each country against a selected base country. This is useful for identifying relative macro strength or weakness. For example, if the base country is set to the USA, the indicator shows how Australia, Japan, the UK, Europe, China, and other countries compare against the United States.
The heatmap includes the following datasets:
Interest Rates and Differentials
Displays policy interest rates or interest-rate differentials between countries. This is especially useful for forex analysis because higher relative interest rates can influence capital flows and currency strength.
GDP and Differentials
Displays GDP year-over-year growth or GDP growth differentials. This helps identify which economies are expanding faster or slower relative to the selected base country.
Balance of Trade and Differentials
Displays trade balance data. A stronger trade surplus may indicate external demand strength, while a deficit may reflect import pressure or weaker export competitiveness.
Reserves and Differentials
Displays foreign exchange reserve levels. This can help assess external liquidity strength and a country’s ability to manage currency or balance-of-payment stress.
Stock Index Performance and Differentials
Displays the performance of major stock indexes from leading economies. This adds a global risk-on/risk-off component to the indicator. Strong equity index performance may reflect improving investor sentiment, while weak performance may signal risk aversion.
The default stock index symbols include:
Australia: ASX 200
Canada: TSX Composite
China: Shanghai Composite
Europe: Euro Stoxx 50
Japan: Nikkei 225
New Zealand: NZX 50
Switzerland: SMI
United Kingdom: FTSE 100
United States: S&P 500
Users can manually change these symbols from the settings panel if they prefer alternative benchmarks.
Example 1: Interest Rate Differential
Suppose the selected dataset is Interest Rates and Differentials and the base country is set to USA .
If:
USA interest rate = 5.50%
Japan interest rate = 0.50%
Then Japan’s differential versus the USA is:
0.50% - 5.50% = -5.00 pp
This means Japan’s policy rate is 5.00 percentage points lower than the USA. In the heatmap, this would appear as a negative differential and would be colored toward the negative side of the gradient.
Example 2: Stock Index Performance Differential
Suppose the selected dataset is Stock Index Performance and Differentials and the timeframe is set to Monthly .
If:
USA S&P 500 monthly return = +4.20%
Japan Nikkei 225 monthly return = +2.10%
Then Japan’s stock index performance differential versus the USA is:
2.10% - 4.20% = -2.10 pp
This means Japan’s equity market underperformed the USA by 2.10 percentage points during that monthly period.
Example 3: Raw Stock Index Performance
If the calculation mode is set to Raw Value , the indicator displays each country’s own index return for the selected period.
For example:
USA: +4.20%
Japan: +2.10%
UK: -1.30%
Europe: +0.80%
This allows users to quickly identify which regions are leading or lagging in global equity performance.
Color Interpretation
Positive values are shown using the positive color gradient.
Negative values are shown using the negative color gradient.
Neutral or near-zero values are shown near the neutral color.
The indicator includes both automatic and manual color scaling. Auto Scale adjusts the heatmap based on the strongest visible value, while Manual Scale lets the user set a fixed range for more consistent comparisons.
How Traders Can Use It
Forex traders can use interest-rate and GDP differentials to evaluate relative currency strength.
Macro traders can use trade balance and reserve data to identify external economic pressure or resilience.
Equity and index traders can use global stock index performance to track international risk sentiment.
Commodity traders can use the dashboard as a macro backdrop because global growth, rates, and risk appetite often influence commodity demand and capital flows.
Important Notes
For percentage-based datasets such as interest rates, GDP growth, and stock index returns, differential values are displayed in percentage points, abbreviated as “pp.”
For balance of trade and reserves, raw values may often be more meaningful than differentials because countries may report values in different scales or currencies.
This indicator is designed as a macro and risk-sentiment visualization tool. It should be used together with technical analysis, fundamental analysis, and proper risk management.
Indicador
Stocks: Financial Summary [invincible3]Stocks: Financial Summary
Stocks: Financial Summary is a compact fundamental dashboard designed to visualize a company’s key financial statements directly on the TradingView chart.
The indicator displays three major financial sections:
Income Statement
Revenue, Gross Profit, EBIT or Operating Income, Pretax Income, and Net Income.
Balance Sheet
Total Assets, Total Liabilities, and Shareholders’ Equity.
Cash Flow
Cash Flow from Operations, Cash Flow from Investing, Cash Flow from Financing, and Free Cash Flow.
The dashboard is drawn on the right side of the chart using a clean multi-panel bar-chart layout. It allows traders and investors to quickly compare historical yearly or quarterly financial data without leaving the price chart.
Key Features
* Supports Yearly and Quarterly financial views.
* Optional TTM display for Income Statement and Cash Flow.
* Visual comparison of historical financial periods.
* Auto unit formatting: Raw, K, M, B, and T.
* Customizable dashboard position, spacing, bar width, colors, and transparency.
* Right-side layout designed to keep the price chart readable.
* Uses actual TradingView financial data through `request.financial()`.
* Includes manual fiscal year and quarter override options when exchange reporting labels need adjustment.
This tool is designed for fundamental analysis, long-term stock screening, and quick financial statement comparison. It can help users visually inspect whether a company’s revenue, profitability, assets, liabilities, cash flow, and free cash flow are improving or weakening over time.
This indicator is for educational and informational purposes only. It is not financial advice.
Indicador
Portfolio Treemap [invincible3]Portfolio Treemap
Portfolio Treemap is a visual portfolio monitoring dashboard designed to help traders and investors track multiple holdings directly on the TradingView chart.
The indicator allows users to enter up to 20 instruments, including stocks, ETFs, crypto pairs, forex symbols, or other TradingView-supported assets. For each instrument, the user can define the buy price and number of shares or units held. The script then calculates the live market value, cost basis, unrealized profit/loss, and percentage return using real-time chart data.
The dashboard uses a treemap-style layout where larger boxes represent larger portfolio weight based on the selected ranking mode. Box colors show unrealized performance: green for profitable positions and red for losing positions. The stronger the profit or loss percentage, the stronger the color intensity. Empty cells are blended with the chart background for a cleaner and more professional visual appearance.
Key Features:
• Track up to 20 portfolio instruments
• User-defined portfolio name
• Input symbol, buy price, and shares/units for each holding
• Real-time portfolio value, cost, and unrealized P/L
• Treemap-style visual dashboard
• Profit and loss color gradient
• Green boxes for winning positions
• Red boxes for losing positions
• Dynamic text color for light and dark themes
• Empty cells blend with chart background
• Supports stocks, ETFs, crypto, forex, commodities, and indices
• Adjustable dashboard position and size
• Optional portfolio header
• Multiple box-ranking modes: shares, position value, absolute P/L, and absolute P/L %
How to Use:
1. Add the indicator to your chart.
2. Open the indicator settings.
3. Enter your portfolio name.
4. Select each portfolio symbol.
5. Add your average buy price.
6. Add your number of shares or units.
7. Choose how boxes should be ranked: by shares, position value, absolute P/L, or absolute P/L percentage.
8. Use the dashboard to monitor portfolio performance visually.
Color Logic:
• Green = position is in profit
• Red = position is in loss
• Stronger color = larger percentage move
• Neutral color = near breakeven
• Empty spaces blend with the chart background
Important Notes:
For best results, use instruments quoted in the same currency. Mixing assets quoted in different currencies may make the total portfolio value and P/L less accurate unless the user manually adjusts values.
This indicator is intended for portfolio visualization and monitoring only. It does not provide buy or sell signals and should not be treated as financial advice. Always confirm portfolio values with your broker or exchange.
Indicador
Indicador
CE & PE Signals and Dashboard This indicator plots both the Call (CE) and Put (PE) option premiums side by side on a single panel, making it easy to monitor both legs of a Nifty options trade simultaneously.
Features:
Dual candlestick panel — CE and PE plotted together with adjustable gap offset
Session-anchored VWAP for both CE and PE using option volume
EMA overlay on both CE and PE
Key levels — Previous Day High/Low/Close, Opening Range High/Mid/Low, First Candle Close, Target levels (T1/T2)
Fibonacci 50% and POC (Point of Control) calculated from session open
Full line and label customization — color, width, style for every level
Dashboard (bottom-left overlay):
Live Long CE / Long PE signal status — triggers when premium closes above both VWAP and POC, confirmed by Spot ORB breakout/breakdown
CE and PE VWAP values with above/below status
POC and Fib 50% reference levels
Dynamic Next Levels — if CE is above POC, shows PE ORB levels as next targets and vice versa
Active trade tracker showing Entry premium, Target premium, and SL spot level
Trade Signal Logic:
Long CE — CE close above CE VWAP + POC + Spot closes above ORB High
Long PE — PE close above PE VWAP + POC + Spot closes below ORB Low
Target — +20 points on option premium
SL — Spot candle closes below ORB Low (CE) or above ORB High (PE)
Alerts fire on entry, target hit, and SL hit with full details. Indicador
Stock: Comparison Dashboard [invincible3]Stock: Comparison Dashboard
**Stock: Comparison Dashboard ** is a fundamental and market-strength comparison tool designed to compare two stocks side by side directly on the TradingView chart.
The dashboard helps traders and investors quickly evaluate which stock is stronger across multiple financial dimensions, including growth, income statement strength, profitability, valuation, cash flow quality, financial strength, liquidity, dividend quality, and relative price strength.
Key Features
1. Two-Stock Comparison
Select any two symbols and compare their financial metrics side by side. The dashboard displays both raw values and category-based scores.
2. Fundamental Metrics
The indicator includes a wide set of financial metrics, such as:
* Revenue growth
* EPS growth
* Total revenue
* Operating income
* Net income
* Margins
* Return on equity
* Price-to-earnings ratio
* Price-to-sales ratio
* Free cash flow
* Debt ratios
* Current ratio
* Dividend yield
* Dividend payout ratio
3. Category Scores
The dashboard calculates separate comparison scores for:
* Growth Score
* Income Score
* Profitability Score
* Valuation Score
* Cash Flow Score
* Financial Strength Score
* Liquidity Score
* Dividend Score
* Relative Strength Score
4. Proportional Scoring System
The scoring system uses proportional comparison instead of simple winner-take-all logic.
For example, if one stock has 16% growth and another has 18% growth, the weaker stock does not receive 0. Instead, both stocks receive proportional scores based on how close their values are.
This makes the dashboard more realistic and useful for financial analysis.
5. Relative Strength Score
The Relative Strength Score compares the market performance of both stocks using:
* 3-month price performance
* 6-month price performance
* 12-month price performance
* Position within the 52-week range
* Distance from the 200-day moving average
This helps identify which stock has stronger market momentum.
6. Better / Weaker Value Highlighting
Better and weaker values are highlighted using text color instead of heavy background coloring. This keeps the table cleaner and easier to read.
7. Light and Dark Table Themes
The dashboard includes both light and dark table themes, making it suitable for different TradingView chart layouts.
8. Customizable Rows
Each category allows the user to choose which metrics to display. Unwanted rows can be set to “None” to keep the dashboard clean.
How to Use
1. Select Stock 1 and Stock 2 from the indicator settings.
2. Choose the financial period: Quarter or Year.
3. Select the metrics you want to compare in each category.
4. Choose Light or Dark table theme.
5. Read the raw values and comparison scores to identify the stronger stock.
Interpretation
A higher score means the stock is stronger in that specific category.
Example:
* Higher Growth Score = stronger growth profile
* Higher Profitability Score = better profitability
* Higher Valuation Score = more attractive valuation
* Higher Financial Strength Score = stronger balance sheet
* Higher Relative Strength Score = stronger market momentum
Important Notes
This indicator uses TradingView financial data. Some financial fields may be unavailable for certain stocks, exchanges, or periods. If a metric is unavailable, the table may show a dash.
TradingView also has request limits, so the dashboard is designed to keep the number of active financial rows under control.
This indicator is intended for research, comparison, and educational analysis only. It is not financial advice. Always combine fundamental analysis with your own research, risk management, and market context.
Indicador
Stock: Snowflake Analysis [invincible3]Stock: Snowflake Analysis
Stock: Snowflake Analysis is a visual fundamental-analysis radar indicator designed for stock traders and investors who want a quick, structured view of a company’s financial quality. The indicator converts multiple TradingView financial metrics into normalized 0–100 scores and displays them as a six-axis snowflake/radar chart directly on the price chart.
The purpose of the indicator is to help users quickly evaluate a stock from several key perspectives: dividend quality, growth, inventory efficiency, financial stability, valuation, and future outlook. Each metric is transformed into a score, then plotted visually so the user can immediately see where a company is strong or weak. The current script uses six core categories: Dividend, Growth, Inventory, Stability, Valuation, and Future, and it draws the final score as a radar/snowflake polygon.
Main Concept
The indicator works by pulling available stock financial data from TradingView using request.financial(). These values are then normalized into scores from 0 to 100.
A score near 100 means the company is strong in that category.
A score near 50 means the company is neutral or average.
A score near 0 means the company is weak in that category.
The final snowflake shape gives a quick visual overview:
A large, balanced snowflake suggests broad financial strength.
A small or uneven snowflake suggests weakness or imbalance.
A stretched shape shows that the company is strong in some areas but weak in others.
Six Core Financial Categories
1. Dividend Score
The Dividend axis evaluates whether the stock provides attractive and sustainable shareholder distributions.
It uses:
Dividend yield
Dividend payout ratio
The dividend yield is scored positively when it is higher, while the payout ratio is scored negatively if it becomes too high. A very high payout ratio may suggest that the dividend is less sustainable.
A strong Dividend score usually means the company has a decent yield without excessive payout pressure.
2. Growth Score
The Growth axis measures how well the company is expanding.
It uses:
Revenue growth
EPS growth
Gross margin
The score rewards companies with improving sales, stronger earnings, and healthier gross margins. A company with strong revenue growth but weak margins may receive a mixed score, while a company with both growth and profitability receives a stronger score.
This category is especially useful for identifying companies with improving business momentum.
3. Inventory Score
The Inventory axis evaluates operating efficiency, especially for businesses where inventory management matters.
It uses:
Inventory turnover
Inventory-to-revenue ratio
Higher inventory turnover is considered positive because it suggests that the company sells its inventory efficiently. A lower inventory-to-revenue ratio is also considered positive because it indicates that inventory is not becoming too heavy relative to sales.
This score is more useful for retail, manufacturing, consumer goods, and industrial companies. It is less meaningful for banks, software companies, or service businesses.
4. Stability Score
The Stability axis measures balance-sheet strength.
It uses:
Current ratio
Debt-to-equity ratio
A higher current ratio generally suggests better short-term liquidity, while a lower debt-to-equity ratio suggests lower financial leverage.
A strong Stability score means the company appears financially safer and less dependent on debt. A weak score may suggest liquidity pressure or excessive leverage.
5. Valuation Score
The Valuation axis evaluates whether the stock appears reasonably priced relative to earnings.
It uses:
Earnings yield
Price-to-earnings ratio
Earnings yield is calculated as:
Earnings Yield = EPS / Price × 100
A higher earnings yield is better. A lower P/E ratio is also better, up to a reasonable threshold. This category rewards companies that generate meaningful earnings relative to their current share price.
A high Valuation score may suggest the stock is cheaper relative to earnings, while a low score may suggest the stock is expensive or earnings are weak.
6. Future Score
The Future axis attempts to measure forward-looking quality.
It uses:
Sustainable growth rate
Forward P/E ratio
A higher sustainable growth rate improves the score, while a very high forward P/E lowers the score. This category tries to balance future growth potential with future valuation risk.
A strong Future score suggests the stock may have a reasonable combination of expected growth and forward valuation.
Final Score
The center score is calculated as the average of the six category scores:
Final Score = Average of Dividend, Growth, Inventory, Stability, Valuation, and Future
This final score is displayed in the center of the radar chart.
The score color changes dynamically using the indicator’s heatmap color theme:
Low scores appear in purple tones.
Mid scores appear in teal tones.
High scores appear in green/yellow tones.
This makes it easier to visually identify weak, neutral, and strong readings.
Visual Design
The indicator displays a clean snowflake/radar chart directly on the price chart. Each axis represents one financial category.
Visual components include:
Hexagonal grid rings
Axis lines
Category labels
Score markers
Filled snowflake polygon
Dynamic color based on total score
Optional historical comparison snowflake
The snowflake is placed to the right side of the latest bar using the Right Offset setting, so it does not cover the current candles.
Historical Comparison
The indicator includes an optional Historical Snowflake feature.
When enabled, it compares the current snowflake with a previous score profile based on the selected historical lookback.
For example:
Historical Lookback = 252 bars
This can be used as an approximate one-year comparison on daily charts.
The historical snowflake helps users see whether the company’s fundamental profile has improved, weakened, or remained stable over time.
Stock-Only Protection
This indicator is designed for stock symbols only because financial metrics such as dividend yield, payout ratio, EPS, revenue growth, and debt-to-equity are stock/company-specific data.
For non-stock symbols such as:
Gold
Forex pairs
Crypto
Indices
Commodities
the script does not draw the snowflake. Instead, it displays a warning message explaining that financial metrics are not available for those instruments.
This prevents misleading neutral scores from appearing on symbols where company financial data does not exist.
Input Settings
Radar Layout
Right Offset Bars
Moves the snowflake to the right side of the latest candle.
Scale Lookback
Controls the price range used to vertically scale the snowflake on the chart. This does not affect the financial scores.
Width
Controls the horizontal size of the radar.
Height %
Controls the vertical size of the radar relative to the recent price range.
Label Distance
Controls how far the category labels are placed from the radar center.
Visual Styling
Show Grid Rings
Turns the hexagonal background rings on or off.
Show Axis Lines
Turns the center-to-axis guide lines on or off.
Show Axis Labels
Shows or hides the category names and scores.
Show Score Markers
Shows or hides circular markers at each snowflake point.
Dynamic Colors
When enabled, the snowflake color changes based on the total average score.
Marker Size
Controls the size of the score markers.
Historical Comparison
Show Historical Snowflake
Displays a previous score profile for comparison.
Historical Lookback Bars
Defines how far back the comparison should be calculated.
How to Interpret the Snowflake
A strong stock usually shows:
A broad and balanced snowflake
High Growth and Stability scores
Reasonable Valuation score
Improving Future score
A risky or weak stock may show:
A compressed snowflake
Very low Stability
Weak Growth
Expensive Valuation
Poor Future score
An unbalanced company may show a stretched snowflake. For example, a high Growth score but low Stability and Valuation scores may indicate a fast-growing but financially risky or expensive company.
Best Use Cases
This indicator is useful for:
Quick stock screening
Comparing companies visually
Identifying financial strengths and weaknesses
Monitoring changes in a company’s financial profile
Combining fundamentals with technical analysis
Long-term investing and swing-trading research
It is especially helpful when comparing stocks within the same sector.
Important Notes
The indicator uses a generic scoring model. Different sectors naturally have different financial structures.
For example:
Banks do not use inventory metrics in the same way as retail companies.
Utilities often carry higher debt.
Technology companies may have low dividend scores but strong growth.
Retail and manufacturing companies rely more heavily on inventory efficiency.
Because of this, the scores should be interpreted with sector context.
Limitations
This indicator should not be used as a standalone buy or sell signal.
Financial data can be delayed, unavailable, or inconsistent depending on the symbol and exchange. When a financial metric is missing, the script uses a neutral internal fallback value to keep the radar visually stable.
The indicator is best used as a summary and comparison tool, not as a complete valuation model.
Disclaimer
Snowflake Analysis is an educational and research tool. It is not financial advice. Users should always combine this indicator with their own analysis, sector research, risk management, and broader market context before making trading or investment decisions. Indicador
Prev Day & Week Levels + OR + Breakout/RejectionAll-in-one key level indicator — Previous Day/Week OHLC extensions, 5-min Opening Range, and automatic Breakout & Rejection signals.
Automatically plots the Previous Day and Previous Week High, Low, Mid,
±150%, and ±200% extension levels — giving you the full price map before
the session even begins.
🕯️ Opening Range (First 5 Minutes)
Captures the High, Low, Mid, and ±150% extensions of the first 5-minute
candle range of each session. Resets cleanly every day. Session window
is fully customizable (default: 9:15–9:20 IST for NSE).
⚡ Breakout & Rejection Signals (PD/PW Levels Only)
Signals fire automatically when price interacts with key Day or Week levels.
▲ BO — Bullish Breakout: Close clears above the level decisively
▼ BO — Bearish Breakdown: Close breaks below the level decisively
↑ REJ — Bullish Rejection: Wick pierces below, candle closes back above
↓ REJ — Bearish Rejection: Wick pierces above, candle closes back below
✅ Only ONE signal per level per day/week — no repeated labels on the
same level. OR levels are intentionally excluded from signal detection
to keep the chart clean.
⚙️ Fully Customizable
• Toggle Day / Week / OR levels independently
• Choose line color and style (solid / dotted / dashed) per group
• Enable or disable historical levels
• Tune Breakout close threshold and Rejection wick ratio
• Adjust session open window to match your exchange
🕐 Designed for NSE (IST timezone) — works on any intraday timeframe
(1m, 3m, 5m, 15m recommended).
Indicador
MTIDDescription
MTID is an all-in-one overlay built for swing and position traders who want price action, key statistics and fundamentals on a single pane. Six configurable moving averages, a "big move" marker, a live stats dashboard, and an 8-quarter fundamentals table are combined into one indicator with independent toggles for every section.
WHAT'S ON THE CHART
• Six moving averages — each with its own length, type (SMA/EMA), color and timeframe-visibility filter (All / Intraday+Daily / Weekly+Monthly / Intraday-only / Daily-only / Weekly-only). Default lengths 10/20/50/100/150/200 cover the most-watched values.
• Purple-Dot Big Move — flags bars whose move ≥ a configurable % AND volume ≥ a configurable threshold. Shape, size, color and timeframe-visibility are all configurable; bars can be color-coded on move direction.
• Optional bar coloring for high relative-volume bars.
STATS DASHBOARD (vertical table or horizontal headband)
• Sector & Industry (auto-detected from the symbol)
• Market Cap with currency conversion (Auto / USD / INR / EUR / GBP / JPY) and Indian (Cr/LCr) or Western (M/B/T) formatting
• 52-Week High/Low — % off the high and % off the low (daily-candle based regardless of chart TF)
• 13-Week Peak/Bottom — same idea over a quarter
• ADR (Average Daily Range %) and ATR — daily-candle based
• U/D Ratio — up-volume vs down-volume
• Float %
• Distance vs Daily SMA and Distance vs Weekly SMA — both shown simultaneously, regardless of chart timeframe
• Relative Volume (RVol)
• % above Low-of-Day (intraday session low; bar low on daily+)
FUNDAMENTALS TABLE
Last four quarters (with three more held internally for YoY math) of:
• EPS with YoY and QoQ % change
• Sales (auto-scaled units) with YoY and QoQ % change
• OPM% (Operating Margin = Operating Income / Revenue) with YoY and QoQ
• Per-quarter P/E (annualised from quarter EPS)
Plus an optional row showing the next two estimated quarters (EPS estimates, YoY/QoQ).
Header row showing Market Cap, Free-Float Mkt Cap, ROE and TTM P/E.
Vertical (full grid) or horizontal (transposed headband) layout.
IPO-FRIENDLY
Lookback windows adapt to available history. A newly listed symbol with fewer than 52 weeks (or 13 weeks, 50 bars for RVol, 20 days for ADR, etc.) still gets values computed over whatever data exists, instead of showing "N/A".
CUSTOMIZATION
• Every section independently togglable.
• Per-table position (6 anchor points), text size, layout (vertical / horizontal headband), border & frame width.
• Per-column text alignment (Left / Center / Right) for the dashboard.
• Configurable blank spacer rows at the top of each table — useful when TradingView's hover controls overlap the table.
• Fully themable colors (positive / negative / neutral, backgrounds, borders).
NOTES
• Sector, Industry, Market Cap, ROE, Float, EPS, Sales, Operating Income and EPS estimates are sourced from TradingView's request.financial / request.earnings and may be unavailable for some symbols or exchanges.
• Currency conversion uses FX_IDC daily rates.
• Built in Pine Script v6. Indicador
Indicador
Indicador
Volume Financial ProVolume Financial Pro is a smart volume indicator built for traders who operate across multiple asset classes, including Forex, Crypto, Commodities, Indices, and Stocks. It combines a Proxy Volume Engine with a candle-based delta intensity system to deliver meaningful volume analysis even on platforms that do not provide real volume data.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
THE PROBLEM THIS INDICATOR SOLVES
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Most retail brokers and CFD platforms — particularly those offering Forex, metals, and index CFDs — do not provide real volume data. The standard volume indicator on these platforms either returns zero, returns meaningless tick counts, or simply shows nothing. This makes volume-based analysis impossible for a large portion of the trading community.
Volume Financial Pro solves this with a built-in Proxy Volume Engine.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
HOW THE PROXY VOLUME ENGINE WORKS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
The indicator automatically detects the current symbol and maps it to a liquid equivalent source that provides real, reliable volume data. For example:
• XAUUSD → COMEX:GC1! (Gold Futures)
• EURUSD → FX:EURUSD
• BTCUSD → BINANCE:BTCUSDT
• NDQUSD → OANDA:NAS100USD
• AAPL → NASDAQ:AAPL
Over 80 symbols are mapped across all major asset classes. If the platform provides native volume, it is used directly. If not, the proxy volume is fetched and applied transparently — no configuration needed from the user.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
DELTA-BASED COLOR SYSTEM
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Each volume bar is colored based on sell intensity, calculated from the relationship between the candle body size and its full high-low range. This approximates the proportion of buying versus selling pressure within each bar.
• Bullish bars → cyan
• Bearish bars with moderate selling → light red
• Bearish bars with high selling intensity (above 60%) → dark red
This gives traders an immediate visual read on conviction behind each move — not just whether price went up or down, but how aggressively it was bought or sold.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
EMA OVERLAY
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
An optional EMA (default: 9 periods) is plotted over the volume histogram to help identify trends in volume activity and spot anomalies such as volume spikes or dry-up zones that may precede price reversals.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
SETTINGS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
• EMA Length — adjustable period for the volume EMA (default: 9).
• Show EMA — toggle the EMA line on or off.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
COMPATIBLE WITH
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Forex majors, minors and exotics · Crypto (via Binance) · Gold, Silver, Platinum, Palladium · Oil and Natural Gas · Agricultural commodities · US Dollar Index · Major global indices: DOW, NASDAQ, S&P 500, Nikkei, DAX, FTSE, CAC, MIB, ASX, Hang Seng · Top US and European stocks.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
NOTES
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
This indicator is an original work. The Proxy Volume Engine, symbol mapping table, and delta intensity color logic were developed independently by the author and do not derive from any existing published script.
Indicador
Indicador
