vdubus

Vdub Binary Options SniperVX v1

Vdub Binary Options SniperVX v1
Designed for Binary Options 60 sec trading upwards
Notes on chart
Please note the signal generated are configure to be super fast on candle opening. The down side to this is signals may switch direction mid stream.
ITM candlesticks signals generated went 6/300 Losses on a 1 min chart.
the blue line indicates reversal zones. Buy / sell targets are at the next projected line TF settings to suit

Sniper series

Eliminar de Scripts favoritos. Añadir a Scripts favoritos.
//╭╮╱╱╭╮╭╮╱╱╭╮
//┃╰╮╭╯┃┃┃╱╱┃┃
//╰╮┃┃╭┻╯┣╮╭┫╰━┳╮╭┳━━╮
//╱┃╰╯┃╭╮┃┃┃┃╭╮┃┃┃┃━━┫
//╱╰╮╭┫╰╯┃╰╯┃╰╯┃╰╯┣━━┃
//╱╱╰╯╰━━┻━━┻━━┻━━┻━━╯
//╭━━━┳╮╱╱╱╱╱╱╱╭╮
//┃╭━╮┃┃╱╱╱╱╱╱╱┃┃
//┃┃╱╰┫╰━┳━━┳━╮╭━╮╭━━┫┃
//┃┃╱╭┫╭╮┃╭╮┃╭╮┫╭╮┫┃━┫┃
//┃╰━╯┃┃┃┃╭╮┃┃┃┃┃┃┃┃━┫╰╮
//╰━━━┻╯╰┻╯╰┻╯╰┻╯╰┻━━┻━╯
//━╯
//Vdub Binary Options SnipperVX v1 / Vdub Rejection Spike v3 intergration -
//Signal generator for Binary Options / ©Vdubus http://www.vdubus.co.uk/
study("Vdub Binary Options SniperVX  v1", overlay=true, shorttitle="Vdub_SniperBX_v1")
//
//====================channel======================
len = input(8, minval=1)
src = input(close, title="Source")
out = sma(src, len)
last8h = highest(close, 13)
lastl8 = lowest(close, 13)
bearish = cross(close,out) == 1 and close[1] > close
bullish = cross(close,out) == 1 and close[1] < close
channel2=input(false, title="Bar Channel On/Off")
ul2=plot(channel2?last8h:last8h==nz(last8h[1])?last8h:na, color=black, linewidth=1, style=linebr, title="Candle body resistance level top", offset=0)
ll2=plot(channel2?lastl8:lastl8==nz(lastl8[1])?lastl8:na, color=black, linewidth=1, style=linebr, title="Candle body resistance level bottom", offset=0)
//
//--------------------Trend colour ema------------------------------------------------//    ema trend direction trigger For Singals 1 & 2
src0 = close, len0 = input(13, minval=1, title="Trend Change EMA")
ema0 = ema(src0, len0)
plot_color = ema0 >= ema0[2]  ? lime: ema0 < ema0[2] ? red : na
plot(ema0, title="EMA", style=line, linewidth=1, color = plot_color)
//
//--Modified vyacheslav.shindin-------------------------------------------------//           Signal 1
//Configured ema signal output
slow = 8
fast = 5
vh1 = ema(highest(avg(low, close), fast), 5)
vl1 = ema(lowest(avg(high, close), slow), 8)
//
e_ema1 = ema(close, 1)
e_ema2 = ema(e_ema1, 1)
e_ema3 = ema(e_ema2, 1)
tema = 1 * (e_ema1 - e_ema2) + e_ema3
//
e_e1 = ema(close, 8)
e_e2 = ema(e_e1, 5)
dema = 2 * e_e1 - e_e2
signal = tema > dema ? max(vh1, vl1) : min(vh1, vl1)
is_call = tema > dema and signal > low and (signal-signal[1] > signal[1]-signal[2])
is_put = tema < dema and signal < high and (signal[1]-signal > signal[2]-signal[1])
 
plotshape(is_call ? 1 : na, title="BUY ARROW", color=green, text="*BUY*", style=shape.arrowup, location=location.belowbar)
plotshape(is_put ? -1 : na, title="SELL ARROW", color=red, text="*SELL*", style=shape.arrowdown)
//
//Modified - Rajandran R Supertrend----------------------------------------------------- //       Signal 2
Factor=input(1, minval=1,maxval = 000, title="Trend Transition Signal")
Pd=input(1, minval=1,maxval = 100)
Up=hl2-(Factor*atr(Pd))
Dn=hl2+(Factor*atr(Pd))
TrendUp=close[1]>TrendUp[1]? max(Up,TrendUp[1]) : Up
TrendDown=close[1]<TrendDown[1]? min(Dn,TrendDown[1]) : Dn
Trend = close > TrendDown[1] ? 1: close< TrendUp[1]? -1: nz(Trend[1],0)
 
plotarrow(Trend == 1 and Trend[1] == -1 ? Trend : na, title="Up Entry Arrow", colorup=lime, maxheight=1000, minheight=50, transp=85)
plotarrow(Trend == -1 and Trend[1] == 1 ? Trend : na, title="Down Entry Arrow", colordown=red, maxheight=1000, minheight=50, transp=85)
// Moddified [RS]Support and Resistance V0
RST = input(title='Support / Resistance length:', type=integer, defval=21)
RSTT = valuewhen(high >= highest(high, RST), high, 0)
RSTB = valuewhen(low <= lowest(low, RST), low, 0)
RT2 = plot(RSTT, color=RSTT != RSTT[1] ? na : red, linewidth=1, offset=0)
RB2 = plot(RSTB, color=RSTB != RSTB[1] ? na : green, linewidth=1, offset=0)
//
//===============================Directional Projection=======================================//
tf2 = input('1', title="Trend Projection TF / Mins/D/W")
M2 = input('ATR')
P2 = input(13.00, type=float)
W2 = input(1)
pf2 = pointfigure(tickerid, 'close', M2, P2, W2)
spfc2 = security(pf2, tf2, close)
channel3=input(false, title="Connect Projection High/Low")
p22=plot(channel3?spfc2:spfc2==nz(spfc2[1])?spfc2:na, color=blue, linewidth=2, style=linebr, title="Directional Projection", offset=0)
//----------------------------------------------------------------------//

Comentarios

How long should this be trades for? 1 min or 2 min?
+74 Responder
this to be used on min chart only
?
+41 Responder
MarxBabu HumayunBajwa
@HumayunBajwa, Add this for more profitability
code available here

+52 Responder
Not working more lost trades than wins.70% lost 30 % win.
+29 Responder
vdubus oliver.pfaff.581
with out prior knowledge of price action you'll fin it hard to trade using this indicator. Try FX sniper the signals are trend directional filtered.
+15 Responder
LeeAng vdubus
Hi vdubus, What do you mean by this statement. ITM candlesticks signals generated went 6/300 Losses on a 1 min0.54% chart? Is this only 6 losses or 300 losses?
+31 Responder
kking37 LeeAng
Based on what was said around it im thinking it was 300 losses but im not sure
+2 Responder
LeeAng kking37
Thats how I have it but thats not really worth much then but if its only 6 wins then one should test the reverse then? Maybe more consistant that way.
+1 Responder
Inicio Analizador de acciones Analizador de Forex Crypto Screener Calendario económico Cómo funciona Funcionalidades del gráfico Precios Recomendar a un amigo Normas Centro de ayuda Soluciones broker y sitio web Widgets Soluciones gráficas Biblioteca de gráficos ligeros Blog y Noticias Twitter
Perfil Opciones de configuración del perfil Cuenta y facturación Recomendar a un amigo Mis Tickets de Soporte Centro de ayuda Ideas publicadas Seguidores Siguiendo Mensajes privados Chat Cerrar sesión