Here is an extensive library on different variations of supertrend.

Library "supertrend"
supertrend : Library dedicated to different variations of supertrend

supertrend_atr(length, multiplier, atrMaType, source, highSource, lowSource, waitForClose, delayed) supertrend_atr: Simple supertrend based on atr but also takes into consideration of custom MA Type, sources
Parameters:
  • length: : ATR Length
  • multiplier: : ATR Multiplier
  • atrMaType: : Moving Average type for ATR calculation. This can be sma , ema , hma , rma, wma , vwma , swma
  • source: : Default is close. Can Chose custom source
  • highSource: : Default is high. Can also use close price for both high and low source
  • lowSource: : Default is low. Can also use close price for both high and low source
  • waitForClose: : Considers source for direction change crossover if checked. Else, uses highSource and lowSource.
  • delayed: : if set to true lags supertrend atr stop based on target levels.
Returns: dir : Supertrend direction
supertrend : BuyStop if direction is 1 else SellStop

supertrend_bands(bandType, maType, length, multiplier, source, highSource, lowSource, waitForClose, useTrueRange, useAlternateSource, alternateSource, sticky) supertrend_bands: Simple supertrend based on atr but also takes into consideration of custom MA Type, sources
Parameters:
  • bandType: : Type of band used - can be bb, kc or dc
  • maType: : Moving Average type for Bands. This can be sma , ema , hma , rma, wma , vwma , swma
  • length: : Band Length
  • multiplier: : Std deviation or ATR multiplier for Bollinger Bands and Keltner Channel
  • source: : Default is close. Can Chose custom source
  • highSource: : Default is high. Can also use close price for both high and low source
  • lowSource: : Default is low. Can also use close price for both high and low source
  • waitForClose: : Considers source for direction change crossover if checked. Else, uses highSource and lowSource.
  • useTrueRange: : Used for Keltner channel. If set to false, then high-low is used as range instead of true range
  • useAlternateSource: - Custom source is used for Donchian Chanbel only if useAlternateSource is set to true
  • alternateSource: - Custom source for Donchian channel
  • sticky: : if set to true borders change only when price is beyond borders.
Returns: dir : Supertrend direction
supertrend : BuyStop if direction is 1 else SellStop

supertrend_zigzag(length, history, useAlternateSource, alternateSource, source, highSource, lowSource, waitForClose, atrlength, multiplier, atrMaType) supertrend_zigzag: Zigzag pivot based supertrend
Parameters:
  • length: : Zigzag Length
  • history: : number of historical pivots to consider
  • useAlternateSource: - Custom source is used for Zigzag only if useAlternateSource is set to true
  • alternateSource: - Custom source for Zigzag
  • source: : Default is close. Can Chose custom source
  • highSource: : Default is high. Can also use close price for both high and low source
  • lowSource: : Default is low. Can also use close price for both high and low source
  • waitForClose: : Considers source for direction change crossover if checked. Else, uses highSource and lowSource.
  • atrlength: : ATR Length
  • multiplier: : ATR Multiplier
  • atrMaType: : Moving Average type for ATR calculation. This can be sma , ema , hma , rma, wma , vwma , swma
Returns: dir : Supertrend direction
supertrend : BuyStop if direction is 1 else SellStop
Notas de prensa: Add signature ;)
Notas de prensa: Added new method zsupertrend - which is same as supertrend_zigzag. But, instead of calculating zigzag freshly, this method takes precalculated zigzag array as input.

zsupertrend(zigzagpivots, history, source, highSource, lowSource, waitForClose, atrlength, multiplier, atrMaType) zsupertrend: Same as zigzag supertrend. But, works on already calculated array rather than Calculating fresh zigzag
  Parameters:
    zigzagpivots: : Precalculated zigzag pivots
    history: : number of historical pivots to consider
    source: : Default is close. Can Chose custom source
    highSource: : Default is high. Can also use close price for both high and low source
    lowSource: : Default is low. Can also use close price for both high and low source
    waitForClose: : Considers source for direction change crossover if checked. Else, uses highSource and lowSource.
    atrlength: : ATR Length
    multiplier: : ATR Multiplier
    atrMaType: : Moving Average type for ATR calculation. This can be sma, ema, hma, rma, wma, vwma, swma
  Returns: dir : Supertrend direction
supertrend : BuyStop if direction is 1 else SellStop
Notas de prensa: Added multiband supertrend

msupertrend(bandType, source, maType, length, useTrueRange, highSource, lowSource, waitForClose, numberOfBands, multiplierStart, multiplierStep, trailingDistance, trailStates) msupertrend : Dynamic trailing supertrend based on multiple bands - either bollinger bands or keltener channel
  Parameters:
    bandType: : Band type - can be either bb or kc
    source: : custom source if required
    maType: : Moving Average Type : Can be sma, ema, hma, rma, wma, vwma, swma, highlow, linreg, median
    length: : Oscillator length - not used for TSI
    useTrueRange: : if set to false, uses high-low.
    highSource: : Default is high. Can also use close price for both high and low source
    lowSource: : Default is low. Can also use close price for both high and low source
    waitForClose: : Considers source for direction change crossover if checked. Else, uses highSource and lowSource.
    numberOfBands: : Number of bands to generate
    multiplierStart: : Starting ATR or Standard deviation multiplier for first band
    multiplierStep: : Incremental value for multiplier for each band
    trailingDistance: : Number of band states to trail for trailing stop.
    trailStates: : If selected trails the band states along with trailing price. If unselected only price is trailed.
  Returns: dir : Supertrend direction
supertrend : BuyStop if direction is 1 else SellStop
Notas de prensa: v5

Updated dependent libraries
Notas de prensa: v6

Added:
zupertrend(length, history, useAlternateSource, alternateSource, source, highSource, lowSource, waitForClose, atrlength, multiplier, atrMaType) zupertrend: Zigzag pivot based supertrend
  Parameters:
    length: : Zigzag Length
    history: : number of historical pivots to consider
    useAlternateSource: - Custom source is used for Zigzag only if useAlternateSource is set to true
    alternateSource: - Custom source for Zigzag
    source: : Default is close. Can Chose custom source
    highSource: : Default is high. Can also use close price for both high and low source
    lowSource: : Default is low. Can also use close price for both high and low source
    waitForClose: : Considers source for direction change crossover if checked. Else, uses highSource and lowSource.
    atrlength: : ATR Length
    multiplier: : ATR Multiplier
    atrMaType: : Moving Average type for ATR calculation. This can be sma, ema, hma, rma, wma, vwma, swma
  Returns: dir : Supertrend direction
supertrend : BuyStop if direction is 1 else SellStop

Request trial access: https://www.trendoscope.com.au/contact-us
Reach me on telegram: https://t.me/HeWhoMustNotBeNaamed
Join tradingview: https://www.tradingview.com/gopro/?share_your_love=sudh
USDT (TRC20): TCaz4CG9aZyR4jp3Ygf7MESWJPmcJgoep5
Biblioteca Pine

Siguiendo el verdadero espíritu de TradingView, el autor de este código de Pine lo ha publicado como biblioteca de código abierto, para que el resto de programadores de Pine de esta comunidad puedan volver a utilizarlo. ¡Un hurra por el autor!! Puede utilizar esta biblioteca de forma privada o en otras publicaciones de código abierto, pero debe ceñirse a lo establecido en las Normas internas.

Exención de responsabilidad

La información y las publicaciones que ofrecemos, no implican ni constituyen un asesoramiento financiero, ni de inversión, trading o cualquier otro tipo de consejo o recomendación emitida o respaldada por TradingView. Puede obtener información adicional en las Condiciones de uso.

¿Quiere utilizar esta biblioteca?

Copie la siguiente línea y péguela en su script.